Hello everyone,
A small request on my HD2.
I adjusted my settings to vibrate + ring tone, what works.
By cons, when I put my phone on vibrate mode and I receive a call, my phone got a call in silent mode, but does not vibrate. Which means that I often miss my calls.
I wonder if someone has encountered this problem?
Perhaps manipulation in the registry?
In advance thank you,
Franky
My phone has completely stopped vibrating. It just makes a click once in a while when it should vibrate. TMO is sending me a new one.
Now this is not a coincidence!
Just as I read the title my phone - well, does nothing, but shows me someone is calling. It is in vibrating mode but it does not vibrate!
So, yes, I also have this problem!
Related
Hello all... Ok, as I stated in the subject of this thread, my vibration isn't working on my MDA. I don't know what is going on. I've tried ticking all the checkboxes that say vibrate... moved the slider down to vibrate only... etc.. I don't know exactly how to troubleshoot it properly as I don't really know the full capabilities of this phone. But as far as I know, if you put the phone on vibrate, it should vibrate when someone calls right? Not the case with my phone.
Please could someone help me figure out what is going on... maybe it's a hardware issue that is unfixable... but maybe, just maybe.... it's some sort of registry thing where I can get it to vibrate... I don't like missing calls due to my ringtone being drowned out by street noise (thank God for voicemail and call history)... Thank you again, hope someone has a solution for me
I had the same problem happen to my 8125. The phone would vibrate when I held the comm button to change it from ringer to vibrate. But, when I recieved a phone call or text message, the phone would not vibrate. I knew the vibrate was working because it did vibrate when I changed the ringer. I had to do a hard reset to fix the problem though, so that may be your only solution.
Same here. Can anyone tell me which part or component on the O2 XDA II mini is responsible for viration?
Soft vibrate
In my case, the vibrate is working, but it's lost all it's power....feels like the motor is giving up. Is this normal? Does a vibrate motor on a phone have such a limited lifespan?
If it's used a lot then it's feasible for such a tiny vibrate component to burn out after a while maybe after a year or more.
I just recieved my Hermes today, flashed it to a wm6 rom. But for whatever reason, when I'm recieving an incomming call all it does is display up on the screen, no vibrate, no ring tone, nothing. I've tried switching modes, ringtones, moved ringtone volume to max and vibrate and still it doesn't do anything... Am i missing something here?
Oh and I forgot, every other sound works, such as text messages ... Just nothing for phone calls!
?
hello did you find a workaround for this problem,
thanks
dew1989 said:
Oh and I forgot, every other sound works, such as text messages ... Just nothing for phone calls!
Click to expand...
Click to collapse
I had the same issue when I had a Tytn II last year.
My issue is that when the phone rings while in normal mode, it is one constant vibration, which I dont like.
Also when i receive a text message in normal mode, the vibration is constant and lasts for about 4 seconds.
BUT
when the phone is in vibrate mode, the vibration for calls is a on/off vibration which I like, and for texts is 3 sharp vibrations which is a lot more useful in distinguishing whether it is a phone call or text that i am receiving when the phone is in my pocket.
Is there anything I can do to make the HD behave the way it does in vibrate mode for all calls?
There must be some sort of registry setting that can be tweaked.
Thanks in advance for any replies..
anyone?
Try this, It could be what your looking for.
http://forum.xda-developers.com/showthread.php?t=437279&highlight=Valert
Would also be interested.
i remember back in the day, my Nokia 6310i (yeah not even color phone) would vibrate to the ring tone.
valert is cool, but on the HD has a bug that disables volume keys
I've installed VAlert but cant find it anywhere?
Try the attached utility. It's conf is under system settings.
nezz, the app has cyrillic interface: any chance to have it in latin (or at least a translation of what the 3 checkboxes mean?)
thanks
Is there a reg tweak for this? When you turn the phone on it does 2 short vibrations. i would like to use this as the sms vibrate alert. Is that possible?
Thanks!
Hi.
Here's the situation: I'm using 3VO rom build 2.00.
My phone works as it should when in Vibrate mode. When I change it to Normal mode, the vibrate icon in the top bar is still present. When I get a call or a message, the phone is still vibrating and it doesn't ring. I've tried to reset profiles to default, I've tried changing the ring type of a certain profile (its set to Ring, I've changed it to Ring and vibrate and then back, same situation).
I've tried switching on the vibrate mode with a key (on my model this means tab/#/vibrate key), and the vibrating icon is still there.
When my profile is set to Normal, I get a sound when i send a SMS.
What else can I tell you? Oh, I've also tried a reboot, same situation.
It worked fine for a month with this new rom, now it's not working... And it bothers me sometimes because I cannot hear when someone calls me, it's just vibrating (same with the Outdoor or Automatic mode).
So can someone please advise? I've used search on the forum and google and couldn't find a similar description of the problem.
Thank you so much in advance!
change ringtone sound to something other than vibrate
the default ringtone i believe was vibrate. change the ringtone to something else in the sound settings. if not reflash the rom works well for most everyone else.
soclean, you are my saviour!
Indeed, I had to change the "Ring tone" setting under Start/Settings/Sounds (it was set to Vibrate).
Thank you man.
no problem. happy to hear i was a help and it wasnt something else wrong with the phone.
Anyone got the same problem? when I set my i9000 to vibration or even silent mode, it still ring when someone call in?
Any suggestion? it is really a problem for me
How about, uh, dropping ringer volume to zero?
Just tested it. When set to vibrate my phone vibrates, on Silent it just displays the incoming call onscreen.
is it possible that some app I installed cash with the vibration mode function?