I was just wondering, on the back of the Hero, there are two "Speaker holes", one at/near the top, and one on the bend. With my hero, no sound directly come out of the lower hole, EG: I can hear sound from it - but that's probably just the other speaker - and is MUCH quiter than the "upper" speaker.
http://www.androidtapp.com/wp-content/uploads/2009/07/HTC-Hero-Back-View.jpg
^You can see the two speaker holes..
Anyone else have this "problem", is that just the way heros are? WHY-O-WHY then are there two holes, implying stereo sound...
Ya know what I mean?
i don´t want to destroy your dreams but it has only one speaker
Ok, so why is there ANOTHER hole lower down on the phone?
i can´t explan this in english but i try...
there you can put this "rope" in it. see here
http://www.pid-handy-fit.de/Fotos/P..._Wildleder_Trageschlaufe_lang_schwarz_neu.jpg
Look in the manual, there´s a picture around page 30
I got mine from, ugh, fleBay... SO no manual, and a wrist strap defenatly doesn't go in there... But - there is no direct speaker sound coming out from there, on everyone's Hero?
If you have sound coming out of your lower hole, you need to see a doctor, or possibly Simon Cowell.
Go to the HTC homepage under support you can download your manual.
cauli said:
If you have sound coming out of your lower hole, you need to see a doctor, or possibly Simon Cowell.
Click to expand...
Click to collapse
Haha, but seriously, I Don't, what I'm asking is - Does sound come out for you? There is no speaker there so why did they put a hole there? In the battery holding 'bay' there are channels which may 'channel' the sound from the main speaker?
As long as no-one else has sound there, it's fine, I though the hero might have two speakers and one of mine was broken..
Thanks
n00b001 said:
I got mine from, ugh, fleBay... SO no manual, and a wrist strap defenatly doesn't go in there... But - there is no direct speaker sound coming out from there, on everyone's Hero?
Click to expand...
Click to collapse
Yes, a wrist strap DOES go in there.
The wrist strap goes through there and onto the hook on the back of the phone, you have to take the cover off before you can do it.
There's no sound coming from it on mine. Could it be anything to do with the mic? I've not bothered looking at a disassembly guide yet as I haven't needed to.
Related
I have an Imate & Orange M1000, when I use the M1000 in the car not a single rattle, but with the I-mate there is terrible rattles. The noise appears to come from inside the unit, after I've removed the battery.
Does anyone have any idea what maybe the problem, are there any disassembly photos guides etc that may help. Both devices work perfectly, I just cannot stand the imate rattling on long jormeys.
Cheers
There should be nothing rattling, the phone consists only of the main board really, why do you remove the battery, you say it rattles after you remove battery.
Maybe you have a Fly into your Xda2? lol
Just kidding guys.. 8)
Try removing the Stylus.
It causes ratteling sounds with my MDA II too.
But they are very quiet with my device, so I didn't do anything about it.
Hope this helps.
...
It's not that something rattles inside, instead something is rattling outside!
Try and hold the volume slider and shake your xda for a moment! The sound stopped for me though.
Is this what you've meant? What i've seen from pictures inside the xda there can't be anything loose.
You're both right (thank god).
Ever since my MDA fell, screen forward, naked, to the street i've been in denial. Didn't want to believe the rattle was from the drop.
It wasn't ! !
After the removal of the styles, it rattled less. After holding the volumeslider it was gone !
Thanks for saveing me :lol: :roll:
Hey,
glad we could provide a little help to you
But please tell us, what you are doing to prevent the stylus and the volumeslider from ratteling.
I think you're not holding the pen and the volumeslider while driving :lol:
...
I do nothing, it's not as loud in the car..
(as if it would ever be heard if i switch my car radio on)..
I just hear the rattleing if i shake the MDA...
jpiek said:
I do nothing, it's not as loud in the car..
(as if it would ever be heard if i switch my car radio on)..
I just hear the rattleing if i shake the MDA...
Click to expand...
Click to collapse
yeah, like mine.
and I very rarely shake my MDA :lol:
Sorry, thought you were the original poster...
never mind...
Bye...
I seem to have located the source of the rattle if I squeeze the front & back around the speaker all is quiet. This would imply that the speaker or the SD socket maybe loose.
Is it pretty straight forward to remove the covers, are there any howto guides, picture by picture stuff?
Cheers
a18041967 said:
I seem to have located the source of the rattle if I squeeze the front & back around the speaker all is quiet. This would imply that the speaker or the SD socket maybe loose.
Is it pretty straight forward to remove the covers, are there any howto guides, picture by picture stuff?
Cheers
Click to expand...
Click to collapse
Yes it's pretty straight forward, just make sure you take the battery out and remove the screws there first. Then the plastic piece around the camera pops off there next. Under that piece are 2 more screws to take out before you can take the case apart. I don't have any pictures as of yet but I need to take mine apart again in the next day or so as I have a mic problem, and I will try to get pictures then.
a18041967 said:
I seem to have located the source of the rattle if I squeeze the front & back around the speaker all is quiet. This would imply that the speaker or the SD socket maybe loose.
Is it pretty straight forward to remove the covers, are there any howto guides, picture by picture stuff?
Cheers
Click to expand...
Click to collapse
Hi,
yes, there are pictures from someone disassembling the MDA II in this forum, just can't find where right now...
Maybe someone can point a way, or try searching.
Good Luck and keep us posted.
...
a18041967 said:
I seem to have located the source of the rattle if I squeeze the front & back around the speaker all is quiet. This would imply that the speaker or the SD socket maybe loose.
Is it pretty straight forward to remove the covers, are there any howto guides, picture by picture stuff?
Cheers
Click to expand...
Click to collapse
Of course there is a guide to the guts of the MDA2, I made it myself when I fixed my speaker problem (it didn't rattle, it just refused to work, however, the problem was fixed)...
Check it here.
Regards,
Rayan
Hi all,
I tend to use a BT headset with my Athena most of the time, but today I forgot it before going out! so I had to go back to using the Athena to my ear, not a huge problem with hands my size, however even with the volume down to its lowest it was still way to loud. Does anyone know of a reg hack or small program that will let you lower the volume down to a discreet volume, and not a hands free volume? its not a problem most of the time, but as a paramedic some of my calls can be a little personal. Its just in case it happens again. you can appreciate I'm not in the position to nip home for left items
Many thanks
Jay
responderman said:
Hi all,
I tend to use a BT headset with my Athena most of the time, but today I forgot it before going out! so I had to go back to using the Athena to my ear, not a huge problem with hands my size, however even with the volume down to its lowest it was still way to loud. Does anyone know of a reg hack or small program that will let you lower the volume down to a discreet volume, and not a hands free volume? its not a problem most of the time, but as a paramedic some of my calls can be a little personal. Its just in case it happens again. you can appreciate I'm not in the position to nip home for left items
Many thanks
Jay
Click to expand...
Click to collapse
I put my fingers over the loudspeakers.... isn't confortable but it works!
I have been thinking about this issue a bit lately myself. My thought is to glue something over both the left and right speaker to completely or almost completely seal it. I might try with different materials and see the effect. May be we can make it almost like a normal embedded earpiece.. just thinking.
eaglesteve said:
I have been thinking about this issue a bit lately myself. My thought is to glue something over both the left and right speaker to completely or almost completely seal it. I might try with different materials and see the effect. May be we can make it almost like a normal embedded earpiece.. just thinking.
Click to expand...
Click to collapse
hi
i already tried to put tape over the speakers, and can tell you it wont work out. it is like the hole athena will sound, the backcover acts like a speaker. when you tape the speaker holes it sounds a litle bit like it came from a cave, but is still much to loud for a 'private' conversation. i think you have to grab a soldering iron and a resistor, to come to a solution, or someone find a way to reduce the volume by software some more than the volume slider can do.
mad
Buy several cheap sets of earbuds and put them in different locatations where you might need them (car, office, briefcase). Not needing stereo for phone calls, clip off one of the earbuds for easier handling.
Brad
oops!
miterb said:
Buy several cheap sets of earbuds and put them in different locatations where you might need them (car, office, briefcase). Not needing stereo for phone calls, clip off one of the earbuds for easier handling.
Brad
Click to expand...
Click to collapse
Well that is a good idea, and one that I have done already. One at the ambulance station, one at home, one in the car, and one in the rig. three ended back at home AHH the price of age! The one in the rig got nicked, so ive put them all back now, but thats why I need the program or hack.
Thanks for the idea's guys, any more?
take care
Jay
eaglesteve said:
I have been thinking about this issue a bit lately myself. My thought is to glue something over both the left and right speaker to completely or almost completely seal it. I might try with different materials and see the effect. May be we can make it almost like a normal embedded earpiece.. just thinking.
Click to expand...
Click to collapse
That is a good idea, could it be so, that there is a kinds of software, that we can adjust the volumen of left and right speaker, so that we can just use the right speaker or just use the left speaker, what ever. has anybody heard of that kind of tiny little soft ware?
Is there a regestry setting to lower the in call volume on the athena itself, so it would start at nothing?
Any solution on this "problem"? Sometimes my headset runs out of battery.
Regards
Hans
This only seems to be a problem with some of the cooked ROMS. The original WM6 ROM that came with my 7501 had a good low-volume level, but when I switched to AP4 the low-end is what used to be about mid-level before.
It must be either a registry change, or a sound driver.
Or a software that make it possible to decrease the volume more
So I opened the back of the A500 and looked around abit and switched places with the microphone and the noise canceller. And now at least when I record, peoples voices can be heard pretty decent. Plus I drilled a hole in the 'hole' to open up the space for the sound to come in abit.
So even with the Acer case on you can hear the voices pretty well
Before you couldnt hear anything. But now the whole google voice thing isnt so easy to use since the mic is face the opposite way but I never used it anyways, plus for VOIP calls its much better to use a headphone.
Just sharing
Please feel free to ask any questions.
Cheers!
Edit: From what I saw in the back I believe the microphone could be changed to a better one some day. Just a matter of finding a good replacement.
(01/08/2011)Add: Here is a sample of the sound when you record a person speaking infont of the iconia now with my mod.
Link sample with modded microphone: [http://dl.dropbox.com/u/33166156/Test.3gp
This is my son and as you can see you can hear him perfectly well
I think the noise canceller could be adjusted to 'muffle' the screeching sound abit.
Cheers!
Edit: Link was broken, fixed now.
i am really thinking about doing that. Iit easy to open the case?
mnaderi said:
i am really thinking about doing that. Iit easy to open the case?
Click to expand...
Click to collapse
Yes its actually very easy, you have to begin at the corner either left or right on the bottom of the A500 (meaning the Dock port area) you take something very thin and sturdy but be careful not scratch it up or bend to hard just make an opening maybe 2,3mm then stick something plasticky (like a protective shield cover slate) but strong and stick in the opening and drag slowly to the right until the entire left side is open (left to the Dock port I mean) and then from there you just gently lift up up until you have the whole bottom open and then you just again you the plastic tool to drag the sides (left and right) and just gently lift with the plastic tool and slowly it will loosen bit by bit once you have left and right and the bottom released then you just hold the whole thing and lift it and with will click off by itself from the upper part.
Here is a video showing pretty much what I described, its very easy:
http://www.youtube.com/watch?v=MIvbWo_p3KI
That tear down video makes things look easy
UnicornKaz said:
That tear down video makes things look easy
Click to expand...
Click to collapse
...there's a tear down vid?
thanks, i opened it up and did some tweaking unfortunately it's only about 30% better, i also made a hole for the case as well. how much did yours improve when you did your mods. i'm guessing the rear mic has to be tweaked as well. thanks
Did you switch places with the mic and the noise canceller?
Pull the Mic out take it to radio shack and get a better set of mic to go in there.I have done this with Michael and internal speakers on notebooks. But I have Bluetooth high def headset. So no need here
this mic problem is seriously killing me.
I often use my tabto record videos but i can never hear any voices cause they are really low. So i am ready to do anything to the tab for a better microphone experience.
As far as drilling holes is concerned, i would want to know where is the mic suitated if there are two. I do noe that one is on the top of the screen in the middle gap between the metal cover n screen glass. Is there another one?
And what can be possibly done to fix or better this issue?
I even tried voip and no1 could hear me, very disappointing pls help sum1.....
i found a kind of solution on youtube...
WuS47cbxyC0
Hi,
Has anyone encountered any issues with their speaker apart from that infamous volume balance?
My right speaker refuses to play anything but if I press the chassis of the transformer together the speaker works but stops working as soon as I let go. To me it sounds like some sort of loose connection/contact.
How easy is it to dismantle? Has anyone encountered a similar issue?
Thanks.
neoghio said:
How easy is it to dismantle? Has anyone encountered a similar issue?
Thanks.
Click to expand...
Click to collapse
My left speaker doesn't work, but very occasionally will momentarily come to life. Squeezing the edge doesn't make a difference. I assume its a loose connection, but I have'nt done anything about it yet.
My left speaker doesnt have any sound at all
Hey OP, I have the same issue, except mine still plays at times, gets fuzzy and buzzy at loud volumes, then stops. However, if I press the right side together, it plays again, so it's not noticeable if I use a really tight sleeve on it, but with the loose sleeve I normally use on it .. :/
Same here, when it does play, its very buzzy. I am inclined to open it up and check if its some loose contact or something but I don't fancy messing my Transformer up as of yet lol.
No problems with either of my Transformers myself, but there were a few reports in the past of poor connections to one of the speakers on some TF units. (Right speaker, if I remember correctly.) Forum search will find them.
If my TF had these issues I would send in for repair
Sent from my PC36100 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1118010&highlight=speaker
My left speaker quit working all together and right speaker from the start was extremely weak. I sent it to ASUS for repair with less than one week turn around and both speakers are nice now. Well worth the time to have done properly.
I'm scared of the RMA process tbh :/
I Managed to fix mine if you people are interested.
It involved disassembling the Transformer.
I took the speaker out of the "compartment" it was in, switched on the tablet and put on some music. No music came out. Pressing the speaker in sound came out but as soon as I let go the sound disappeared. I cut out a small piece of paper and folded it a couple of times and placed it in the compartment the speaker goes in.
When I put the speaker back in the paper sort of squashed the speaker in a bit which in turn kept playing music.
Its not the best of explanations but if someone has a similar issue they may be able to use that as a guideline lol
How hard is it to disassemble the tablet? Also, what tools would I need?
asdfuogh said:
How hard is it to disassemble the tablet? Also, what tools would I need?
Click to expand...
Click to collapse
Its not very hard. You just need some patience as removing the bezel is the only bit you need to be careful with.
You would need a Phillips screw driver (one of the small ones) and a Torx T5 I believe was the correct size.
I used this video as a guidance:
http://www.youtube.com/watch?v=JG9gEYRALtU
To remove the bezel he uses a plastic tool with a very thin edge but many people have had success simply using a guitar pick to remove the bezel. Luckily I had one of those plastic tools and was able to remove it.
Once you can see the insides:
That little black rectangle on the right is the speaker, inserting the small screwdriver in the compartment its in, you should be able to take it out and if your encountering the same problem as me, just press and hold the speaker from both sides to see if audio works.
Picture credit goes to hybridau
neoghio said:
Hi,
Has anyone encountered any issues with their speaker apart from that infamous volume balance?
My right speaker refuses to play anything but if I press the chassis of the transformer together the speaker works but stops working as soon as I let go. To me it sounds like some sort of loose connection/contact.
How easy is it to dismantle? Has anyone encountered a similar issue?
Thanks.
Click to expand...
Click to collapse
This happened to me tonight while watching a youtube vid! Been looking through the forums for successful speaker replacements and messaged one guy already who might have the correct replacement speaker part.
Will update when I know more.
Cracking it open is very easy as long as you take it slow. I did it to fix my power button. It is pretty well known by now that the TF101 was one of the most cheaply built but still amazingly performing tablets on the market.
One of my speakers just blown up for nothing. I opened the case and found out that right one blown up. I want to disable it because it really sounds strange. Is there any way to just use one speaker?
eyesonyou said:
One of my speakers just blown up for nothing. I opened the case and found out that right one blown up. I want to disable it because it really sounds strange. Is there any way to just use one speaker?
Click to expand...
Click to collapse
How do you know its blown? post a pic please
If you are already inside to find the speaker is blown then I suggest that you either de-solder it or cut the wire to the speaker. You can get a replacement here
Oli1122 said:
How do you know its blown? post a pic please
If you are already inside to find the speaker is blown then I suggest that you either de-solder it or cut the wire to the speaker. You can get a replacement here
Click to expand...
Click to collapse
im pretty sure it has blown up. i dont want to give 30dolar for just one speaker too also it still has warranty but in my country asus doesnt fix nexus 7 tablets.
aren't there any way to just disable it from root files?
Im not sure about doing that in rom. I assume its possible hopefully a more experienced dev can answer that for you
Try installing this and using the balance settings in Noozxoide rewire