Database Users

My SVP M600 phone got stuck at Starting screen

Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.

did you try a hard reset ?

Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.

Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.

I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.

Can any one help me in this regard please.

I am having the same problem, but my phone is not sim-locked.

I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated

Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.

ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!

Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.

yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck

Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.

mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks

(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452

hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin

Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.

collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)

Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.

just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...

Killed Wizard! Need Help!!

My wizard freezes at splash screen.
I can start it in boot loader and install a new Rom, i´ve tried Wizard Love and still couldn´t make it work.
For last i tried a original one, WWE from UK Vodafone), but after reset, frezzes in the same place.
Could it be a processor problem? I dont´t think so, because it is working but i just don´t know what else to do...
Please help!!
With the wizard_love rom, i flashed it in my device, it starts up after doing this, but stops at splash screen.

I am a total newb but out of curiosity, how long have you let it sit at the splash screen before calling it?

hello
could you first explain what u did? that caused this, or did it just happened al of the sudden?

It all started in the morning, i try to turn it on and it just stoped in the splash screen like i said.
I just don´t know what else to do.

I had the same problem yesterday. Tried a lot to let my phone work again. It worked after I started the phone pluged to the charger. I hope It works for you.
BTW. in my situation it just started from out of nothing.

I´m Able To Say My Problem Is Solved!!!
Thanks to Drug Store, i solved it!!
CID unlocked it, it was necessary to copy OS to SD card!
Just followed his indications!
Very easy!
Thank´s a lot man!!
IT LIVES!!!

Help! My XDA Exec aleatory stops in a black screen after soft reset!

Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...

wfreed said:
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
Click to expand...
Click to collapse
Have you tried to install another ROM? with a different Bootloader
Battery?
Check the Wiki, there is a lot of usefull info there
Good luck

Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!

wfreed said:
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
Click to expand...
Click to collapse
Hi
here you can find one: http://forum.xda-developers.com/showthread.php?t=409966
The other questions I am no the master, so let´s learn form them
Cheers

Thanks a lot all yours!!
I solve my trouble reflashing my WM5 rom...
I used the Jwrightmcps Crossbow ROM Update 2.12.08 WWE, very fast and very stable WM6 rom! Realy a amazing work by our friend Jwrightmcps!
Including, I want suggest here that all those that still suffering in WM5 (living slowly with crashes, troubles, crashes, more troubles and this poor and slow system), try reflash your HTC with a rom like this... my device reborn!! It was dead more now is alive!!! And much more fast and stable! Before it is slowly my old Jornada 720 (206MHz), but now it realy seems have 520MHz!
Thanks a lot for all.
The link for this excelent work is HERE:
Jwrightmcps Crossbow ROM Update 2.12.08 WWE
(Download the apropriate rom to your device, folow the instructions and EnJoY!! Be HaPpY!!)
This rom don't supports 8GB SDHD cards, but download and Install 2 cabs below and it will support it:
CAB01 - SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_Fre ePK.cab
CAB02 - Signed_Storage_Settings_App.cab
Special thanks to big_quads for this solution!

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.

Thx all of ya , problem solved.

sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.

gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.

Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss

Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

Skin Is Not Loaded :(

hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends

No Answer ?!
Really ?!
it's very important for me.
plz help

Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.

-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention

DOC format

-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx

It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.