Related
Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
hi developers!
i've installed manilla 2.0 on my touch find (cruise, polaris) and it works perfectly, but thje problem is that the phone doesn't see my microsd card, it says: not installed. Any one can help me please?
Moreover, i've instaled the manilla 2.0 becouse my speaker doesn't work, and i tought that i'd repaer it with new software, but it is still broken. How can i fixe it?
Thanx for your time,
and excuse my bad english.
your speaker problem must surely be hardware related so use your warranty or send it to HTC to fix it.
now with manilla i advise you to install one of the rom´s in here that come with it(3lite VI would be my choice although VII is out).
I managed to get manilla working perfectly with cab installation(back in the days when manilla got out,no rom´s with it) but i acknowledge that was prone to failure.When is built-in with the rom works smoother and flawless as long as you choose the right rom...i dont use it,neither manilla or any other shell...plugins FTW i use less memory and have all the things shells have and more in today screen....no panels,no slides,no nothing(Wisbar advance 3,SPB Diary 2.2,Iconsoft phoneEx)
ok, thanxs zed_pt, i'll folow your advice.
Hi can anyone please tell me how to upgrade my ba to wm 6.5 from wm 6? , i used the wizard to upgrade from wm2003 to wm6 about 2 yrs ago, any help much appreciated, love this pda and i love using it as a phone too
basicly, when your device is already upgraded, there is not much to do.
you probably don't have to worry about sim lock and radio roms and storage sizes anymore, since apparently, it all worked fine so far.
so all you need to do is download any wm6.5 rom, unpack it, and make a RUU folder, containing the rom itself (nk.nbf) and a few other files named for example maupgradeut_noid.exe and getdevicedata and so on.
then you hard reset your device by pressing camera+record+power+reset and set the menu options clear registry hive and format storage to "YES" and enable kitl to "NO" using the camera and record buttons to flip and switch, confirm that with the mail button.
then you put your device into bootloader mode by pressing reset+record+power, kill active sync, connect the device to the pc and start maupgradeut_noid. if the 2nd screen shows you at least the version of the rom you go to, you are fine and can start the upgrade.
as soon as it is finished, use the hard reset method described above to prepare the device for the first start and then you might want to use "getting started" on the device to set it up and set up sync to get your pim data back. i shortened this description as you might remember a lot of stuff, or so i hope. most of what i wrote should ring a bell, if not, please feel free to have a look in the wizard for upgrades from wm5 to wm6 -=here=- or simply ask again, what troubles you.
with best regards
Chef_Tony
hi Tony thanks 4 ure help, when u say any rom is that only those specific for ba or are they all universal? i downloaded WM65-23052 & EnergyROM_RAPHAEL_20090811_Titanium or should i stick to the ones on the ba wizard page eg r6? i guess its the latter
of course you can only use blueangel roms found in the ba wm6 section, i mean, if you have a dvd writer that can read any disk, you wouldn't shove a slice of salami in there, would you?
the roms are so far interchangable as being WWE and work with every BA worldwide, but you need a blueangel rom, because of the rom's structure, memory consumption, drivers and so on, and after all, the buttons and the display resolution.
i once had a case, where someone tried to flash a charmer rom to a ba, that rom was way too big, and also the files were completely different, so he couldn't get through with it on his own and asked, because he would have messed up his ba with that pretty bad.
so, conclusively, 23052 builds are nice, but wait, till it's coming for the BA. i think d-two is working on it, maybe you want to have a look at the 23004 german rom thread, i asked him and he is gonna make an english version too, but until then you might want to catch status updates there.
Tony thanks it worked awsome phone, i used xplodes english rom, is there much difference between that & the german one? who needs an iphone eh again many thanks will lookout for d2s new ba release cheers
with the current releases there are no major differences between d-two's and xplode's build (except for the language) but what i wrote was about the next builds, they're both working on 23047 or 23052 builds, but d-two has the advantage that he has overcome the know sync and sms bugs, so his build will probably be the first of those two to come out. although he is rather new to this forum and so far he only supported his own wm6.5 build 23004 german, that is a guy you better keep an eye on. he is making fast progress and maybe will become one of the major chefs soon.
hi again please can you tell me how to do a wm6.5 hard reset & also how to get into into bootloader mode as to reload a new rom eg d2's, also i did notice there were 2 excel icons in msoffice maybe a bug many thanks
actually i solved it myself, just gotta be quicker with the camera & record buttons cheers
Hi Tony everything on explodes exroms installed ok except jbed, is that java? Also i looked at xplodes manila thats really nice, i guess thats on the latest phones , its like a mini o/s, so u would just install that after u install a 6.5 rom?
yes, jbed is the java applet manager.
for manila, i wouldn't say it is a mini os, it is more of an alternative gui, it replaces the titanium today screen with a touchflo one, but it also just features basic functions, photo viewing, music playing and does not alter the start menu or any add-on apps, most of the functions are also available in titanium or for titanium as an add-in, let's say facebook or stuff like that.
the time to install doesn't really matter, you can also install other apps first, whatever, you only need to know that after you install it, you have to deactivate "default" in today plug-ins and also all the others, because you can have only manila as your today plugin then and then you should find a "touch to start touchflo" button on your today screen and then you'll see, whether it works or not. that really depends from user to user, and between the different devices, roms, countries and manila versions, maybe you have to try several versions before you actually find one that runs in an acceptable speed, because that seems to be the general issue when it comes to porting manila.
thanks i may just stick 2 what i have, d2,s new 6.5.1 rom is beta so would that except xplodes extrom 23004 cabs? or is it best to wait for him to put his own one out?
thanks i may just stick with what i have, D2's new rom 6.5.1 is that compatible with xplodes 23004 extrom or is it best to wait for d2 to bring his own one out?
d-two said he wanted to release one, maybe till the weekend he's done putting it together.
I was over at the Mega forum http://forum.xda-developers.com/showthread.php?t=577224 and now wonder if Iolite has a "hidden" G-sensor aswell?
Was trying, he hasn´t a hidden G-sensor.
I thought so too....but it got me doubting because you find a registry entry in the Roms of Billabongstaff.....
Anyway bad luck......
Was found this entry, was changed, restarted - no effects.
I mean, that a lot of entrys in registry are nonsens, but who will clean it ?
Greetings!
Well it was worth the shot, thanks for sharing.
2 years ago I made some 6.1-ROMs for the HTC Wizard. A clean registry and a clean windows-folder will made the ROM fast and stable. I had the fastest german 6.1-ROM for the Wizard. But I haven´t a working german 6.5-kitchen for the Iolite so I can´t cook something. In another forum (a german) I would make a "Joint Venture" - project - cook a ROM together, but it was the shoot in the oven. 24 Downloads of my kitchen - feedback = nothing.
Now my kitchen is cold...
Greetings!
Hello Mirko, don't get discouraged by this experience.....there will be enough fans in this forum for a good Rom.....
But the Rom's need to be in Dutch or English as far as I am concerned and they could even be in WM6.5.3 version.....
By the way nothing but good words about Bruno's Rom.......but I have 2 Touch Cruises at this moment so I can play around a bit.....
mirko.prinz: Actually, I tried to optimize (delete unneeded files and registries) and customize my own ROM (including cursors and graphics) and it took me really lot of time. However it is only WM 6.1 21054 version as I do not like WM 6.5 and it is still not fully completed. I simply need my phone for everyday use and I have no spare time to play with it.
torrentonly said:
mirko.prinz: Actually, I tried to optimize (delete unneeded files and registries) and customize my own ROM (including cursors and graphics) and it took me really lot of time. However it is only WM 6.1 21054 version as I do not like WM 6.5 and it is still not fully completed. I simply need my phone for everyday use and I have no spare time to play with it.
Click to expand...
Click to collapse
I can´t better say this.
Well folks,
Good morning everyone, I have a serious problem ... lol.
I have tried all (I said all) roms from this site amazing and wonderful. I love the design manilla 2d and hate the titanium.
My problem is: I do not think a WM6.5 ROM with manila 2d to not get warning "low memory" on my htc touch elf. I already tried installing the Manila 2d on a clean ROM with wm 6.1 htc touch, but it was good.
Another problem I have: I want to qualqur cost the digital clock that comes in manila, it is very beautiful ... the problem is that whenever I finish any connection, or some program and put on the screen at home, the hours go back one hour behind by about 2 seconds and return to normal again. That's a bummer, I tried in HKLM to change the delay time, but only solved the delay when the phone is in sleep mode and switches to normal mode.
Please, if someone can help me, I need a rom with manilla already installed, but it uses little memory in order to install a ROM 6.5 with manila already included.
Thank you in advance.
Vincent.
Not quite sure what you are asking here (its early and I'm not quite with it) bt I'll reply anyways.
From what I understand, your installs of Manilla 2D are taking up to much space on your installs, leaving you less space to sinatll apps straight to the phone?
Have you tried all of the mods in [UPG] P_D Optimizations [03.14.10: ELFin HD2 Theme] ? This has a lot of tweaks and space saving optimisations for the Elf(in) and are very well explained as well. Could be worth a shot.
Hope this helps.
Stu
Thanks a lot capitanstu72, i will try this, optmized my htc elf and put results here.
Again, thanks.
I tried to put the custom theme that I indicated, but the theme will not boot, it worked.
I'm confused to what you mean. You say it didn't boot, but it worked? How so?
Have you tried using M2DC to remove some tabs to see if it works. You may have to disable footprints unless you have installed that part seperately.
try milky 6682 if u havent tried it ..... consumes 34mb memory on default