Is this thing exist?
Do we have software to separated volume control for speaker and earphone. Because if I use earphone, I have to set to the maximum to get a reasonable volume. However, it is extremely loud under phone speaker.
So, can we have separated control for this 2 thingys?
it is difficult to do
but if you like cheap products you can browse www.ebayfoco.com
weekendli said:
Is this thing exist?
Do we have software to separated volume control for speaker and earphone. Because if I use earphone, I have to set to the maximum to get a reasonable volume. However, it is extremely loud under phone speaker.
So, can we have separated control for this 2 thingys?
Click to expand...
Click to collapse
They are already seperate, when in a call, the volume adjusts for the in-call volume.
you could use phoneAlarm with a different profile when using earphone or not and a specific volume setting. it has many options for this kind of things.
TheChampJT said:
They are already seperate, when in a call, the volume adjusts for the in-call volume.
Click to expand...
Click to collapse
I think he mean the earplug earphone instead of the earphone for the mobile.
Is there any way to make the lowest headphone audio setting any quieter?
I am a big fan of in ear headphones, but the problem I always face is that the lowest setting on audio devices is too loud for these types of headphones. I was wondering if there were any tricks to make the lowest sound setting any quieter.
I'm also wondering where the limitation is, either hardware limit, audio driver, or the android API?
Any ideas would be appreciated.
On a side note, it seems like there is just one "Media Volume" setting state regardless of whether the headphones are plugged in or out. This is somewhat annoying as if I was listening to something on the loud speaker at full volume, and then plug in my headphones to listen to some music later without remembering to change the volume my ears would start to bleed
+1. I like how my previous winmo device had system volume AND player volume which stacked. Set both controls to minimum and I could enjoy my music late at night before going to sleep without having those crescendos making me jump out of my bed.... but with Android, I have yet to find something similar.
I noticed this too but when I switched to a different set of in-ear headphones it changed. Maybe buy a different pair of headphones?
I just started playing a few games on this Nexus 7, and I turned the volume down to the lowest setting because it is late at night and other people in my house are sleeping. I immediately noticed a soft but very audible static buzz coming from the speakers... about the same volume as the audio itself. I held my ear up to the hardware and confirmed it is both top and bottom speakers.
Anybody else experience this?
copyists sorpeno
I didn't notice at first. Noticed this morning with audio low as well.
I'd like to know if anyone else has this too. Kinda wanna know if its hardware since I purchased at best buy and only have 2 weeks to return.
Yup, I was going to report this too, but since it only occurs at minimal volume I didn't bother. I lost my good headphones so I can test the audio jack. Does it happen to you with them on too?
Btw- if this the trade off with the fantastic (for tablet speakers) surround sound I'll take it. Watch the test video on the Play Videos app.
Sent from my Nexus 7
I don't hear it. on mine. But My hearing is horked.
It's because the Nexus 7 uses a crappy digital volume control that simply reduces the volume of the digital waveform before it hits the DAC, instead of having a real analog volume control -an op-amp that adjusts the volume of the signal before it hits the headphone/speaker amplifier.
What you're hearing is quantization noise as at the lowest volume the audio uses only 2-4 bits of dynamic range instead of the full 16 (or 24, dunno what DAC is in this thing). It's the same as the bit-crushing effect you hear in some dubstep and other electronic music that degrades the audio into a robotic crunchy mess, only here it's not on purpose, it's just cheap design.
There is nothing you can do about it.
I've also noticed this (at first I was like, WTF? Is it raining in my game?). If what was said above is true, that makes me sad that nothing can be done about it.
siraltus said:
It's because the Nexus 7 uses a crappy digital volume control that simply reduces the volume of the digital waveform before it hits the DAC, instead of having a real analog volume control -an op-amp that adjusts the volume of the signal before it hits the headphone/speaker amplifier.
What you're hearing is quantization noise as at the lowest volume the audio uses only 2-4 bits of dynamic range instead of the full 16 (or 24, dunno what DAC is in this thing). It's the same as the bit-crushing effect you hear in some dubstep and other electronic music that degrades the audio into a robotic crunchy mess, only here it's not on purpose, it's just cheap design.
There is nothing you can do about it.
Click to expand...
Click to collapse
I'm not sure how you know that but if you're right I guess that means it would happen on all of them... which.. sucks.. Is there anyone that doesn't have this issue to disprove this?
smurfqq said:
I'm not sure how you know that but if you're right I guess that means it would happen on all of them... which.. sucks.. Is there anyone that doesn't have this issue to disprove this?
Click to expand...
Click to collapse
I'm a professional audio engineer, I know exactly how these things work. Most cheap devices do volume controls that way, because adding a dedicated op-amp for analog volume control increases costs of the device, and the Nexus 7 is a budget device.
It does happen on mine, too, in every app that plays sound.
I love when pros come in here and give the technical explanation haha hats off to you, sir!
Sent from my Samsung Galaxy S4 using Tapatalk 4 Beta
siraltus said:
It's because the Nexus 7 uses a crappy digital volume control that simply reduces the volume of the digital waveform before it hits the DAC, instead of having a real analog volume control -an op-amp that adjusts the volume of the signal before it hits the headphone/speaker amplifier.
Click to expand...
Click to collapse
As the others have said, thanks for the explanation. Nice to hear from somebody who understands it, and if the problem is present in all units that actually makes me feel better since I don't have to worry about returning my otherwise perfect unit.
Question though, how come I don't hear the static when using headphones, even on the lowest volume settings where I hear the static from the built-in speakers? That makes me think it's related to the speakers and not the audio hardware... but you obviously know more than me on this.
mrmartin86 said:
I've also noticed this (at first I was like, WTF? Is it raining in my game?). If what was said above is true, that makes me sad that nothing can be done about it.
Click to expand...
Click to collapse
Yeah, funny thing is the first game I played was Bad Piggies on some levels with an ocean tide moving back and forth at the bottom of the screen. I thought the static was the tide sounds... until I heard it in another game too.
tweaked said:
I don't hear it. on mine. But My hearing is horked.
Click to expand...
Click to collapse
It only happens at the absolute lowest volume setting... i.e. one notch up from muted. It sort of happens at the next notch up too, but is most noticeable at the quietest setting, and you need to be in a quiet room. I only noticed because I was using the device in a small echoey mostly tile room (you can probably guess where) and because of the room having such acoustics I put the device on the lowest setting just above mute.
Had something like this on my original nexus 7
Except it happened regardless of the volume setting. Wasn't that audible- had to put my ear against the speaker to really hear it, but it did interfere with other devices, such as my radio, or keyboard with a head phone jack. It would make a sound like a quick DUH-DUH-DUH-DUH-DUH-DUH...DUH-DUH-DUH-DUH-DUH-DUH. My nexus 4 can sometimes cause static interference with other devices, too. Haven't gotten the new nexus 7 so I cannot say whether or not my new one has this issue
Well.. mine's not only happening at the lowest volume notch. If I put it to my ear (never actually going to do this for normal use) it's there at every volume level, just hard to hear once whatever I'm playing gets loud enough. The display unit at a local best buy does the same. I can hear it in a quiet room at the first couple notches (normal use), which is annoying. Also, since someone asked - No it doesn't happen through headphones.
The111 said:
As the others have said, thanks for the explanation. Nice to hear from somebody who understands it, and if the problem is present in all units that actually makes me feel better since I don't have to worry about returning my otherwise perfect unit.
Question though, how come I don't hear the static when using headphones, even on the lowest volume settings where I hear the static from the built-in speakers? That makes me think it's related to the speakers and not the audio hardware... but you obviously know more than me on this.
Click to expand...
Click to collapse
My pleasure! There's tons of FUD on XDA about many things, so I try to contribute on stuff I know well to reduce that.
Without looking at the schematics of the thing I can only guess:
The speaker amplifier is probably just a simple design that outputs 100% power all the time, so you have to control the volume of the signal that enters it, whereas the headphone amp probably has an integrated analog volume control.
A volume control is much easier (read: cheaper) to do in an integrated chip with low power signals (headphone out) than higher power (speaker out), and again, cheaper was the way to go with the Nexus 7.
Hence, there are two separate outputs from the audio chip - one that feeds the speaker amplifier and uses the bit-crushing digital volume control, the other outputs full-scale audio to the headphone amplifier which controls the volume in analog.
siraltus said:
My pleasure! There's tons of FUD on XDA about many things, so I try to contribute on stuff I know well to reduce that.
Without looking at the schematics of the thing I can only guess:
The speaker amplifier is probably just a simple design that outputs 100% power all the time, so you have to control the volume of the signal that enters it, whereas the headphone amp probably has an integrated analog volume control.
A volume control is much easier (read: cheaper) to do in an integrated chip with low power signals (headphone out) than higher power (speaker out), and again, cheaper was the way to go with the Nexus 7.
Hence, there are two separate outputs from the audio chip - one that feeds the speaker amplifier and uses the bit-crushing digital volume control, the other outputs full-scale audio to the headphone amplifier which controls the volume in analog.
Click to expand...
Click to collapse
Makes sense. Thanks again.
siraltus said:
My pleasure! There's tons of FUD on XDA about many things, so I try to contribute on stuff I know well to reduce that.
Without looking at the schematics of the thing I can only guess:
The speaker amplifier is probably just a simple design that outputs 100% power all the time, so you have to control the volume of the signal that enters it, whereas the headphone amp probably has an integrated analog volume control.
A volume control is much easier (read: cheaper) to do in an integrated chip with low power signals (headphone out) than higher power (speaker out), and again, cheaper was the way to go with the Nexus 7.
Hence, there are two separate outputs from the audio chip - one that feeds the speaker amplifier and uses the bit-crushing digital volume control, the other outputs full-scale audio to the headphone amplifier which controls the volume in analog.
Click to expand...
Click to collapse
Is this something they can fix (or at least mitigate) in a software update?
paxunix said:
Is this something they can fix (or at least mitigate) in a software update?
Click to expand...
Click to collapse
No, this is how the hardware is designed.
Noticed this too from the speakers regardless of volume, and regardless of what is playing audio. It's a high pitched squeal to my ears which I can't stand. I've thrown out computer power supplies and video cards that have made similar(obviously, louder) noises.
Was hoping it could be something improved in software, but I guess not. Time to sell this.
http://youtu.be/c9aQnuOrTY8
Recorded what it sounds like at lower volumes with a small condenser mic next to it. Let me know if that's similar to what you guys are hearing too.
Hello everyone, does anyone have experience with these impedance adapters? Do they successfully remove the hissing sound on the headphone jack?
Ifi Audio - IEMatch
Ifi Audio - Ear Buddy
Ultimate Ears - Buffer Jack
DUNU Impedance Adapters
Background: Headphones with higher impedance seem to experience less or no hissing (above 45-60 ohms). If you do not want to buy a new pair of headphones, in principle you can purchase an adapter that increases the impedance. Before I do so (they cost from $5-50 depending on the model), I wonder if anyone has had positive experience with this.
Hello,
I have the Creative EP630 in ear headphones. The hissing sound using the plain headphones is really unbearable (even clearly hearable on normal volume).
Thats why I bought the EarBuddy adapter. With the adapter the hissing is almost completely gone. I can still hear it very little when there is absolute silence, but it is definitalety at a lower or equal level compared to other smarthphones (and not anoying). The rest of the sound doesn't seem to be affected, except that it is at a lower volume (however I'm not an audiophile).
I would also recommend using to use the MI Sound Enhancer (Settings >> Sound >> Headphones & Audio Effects). For me the "General In-Ear" profile improves the sound a little bit more.