.cab to increase x1 sound - XPERIA X1 General

.cab to increase x1 sound - XPERIA X1 General

i found this while i was surfing some arabic SE forum and i wanted to share as I was looking for it and i think some of u may be looking for a cab to raise the volume
I tried it and it worked
I don't know what version or is it still beta but here it is

i do not have my xperia x1 atm but can anyone esle comfirmation that this works?

there are more things that are modified than just sound vol...
Code:
<wap-provisioningdoc>
<characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="AppName" value="Auanti by Davide Gialli OptXperia" />
<parm name="InstallDir" value="%CE2%" translation="install" />
<parm name="NumDirs" value="1" />
<parm name="NumFiles" value="5" />
<parm name="NumRegKeys" value="5" />
<parm name="NumRegVals" value="39" />
<parm name="NumShortcuts" value="0" />
</characteristic>
<characteristic type="FileOperation">
<characteristic type="%InstallDir%" translation="install">
<characteristic type="MakeDir" />
<characteristic type="thread_sms.htm" translation="install">
<characteristic type="Extract">
<parm name="Source" value="THREAD~1.001" />
<parm name="WarnIfSkip" />
</characteristic>
</characteristic>
<characteristic type="AudioPara3.csv" translation="install">
<characteristic type="Extract">
<parm name="Source" value="AUDIOP~1.002" />
<parm name="WarnIfSkip" />
</characteristic>
</characteristic>
<characteristic type="AudioPara3_XC.csv" translation="install">
<characteristic type="Extract">
<parm name="Source" value="AUDIOP~1.003" />
<parm name="WarnIfSkip" />
</characteristic>
</characteristic>
<characteristic type="HTCAPI.dll" translation="install">
<characteristic type="Extract">
<parm name="Source" value="00HTCAPI.004" />
<parm name="WarnIfSkip" />
</characteristic>
</characteristic>
<characteristic type="libgles_cl.dll" translation="install">
<characteristic type="Extract">
<parm name="Source" value="LIBGLE~1.005" />
<parm name="WarnIfSkip" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader">
<parm name="x-wap-profile" value="http://www.htcmms.com.tw/gen/wizard-2.0.xml" datatype="string" />
<parm name="User-Agent" value="prodigy/arcsoft-mmsua-ppc-3.0.0.xx" datatype="string" />
<parm name="Accept-Charset" value="us-ascii,utf-8,iso-10646-ucs-2,iso-8859-1,gb2312,gb13000" datatype="string" />
</characteristic>
<characteristic type="HKCU\ControlPanel\Sip">
<parm name="TurnOffAutoDeploy" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\StorageManager\FATFS">
<parm name="CacheDll" value="diskcache.dll" datatype="string" />
<parm name="CacheSize" value="4096" datatype="integer" />
<parm name="Dll" value="fatfsd.dll" datatype="string" />
<parm name="EnableCache" value="1" datatype="integer" />
<parm name="Flags" value="68" datatype="integer" />
<parm name="FriendlyName" value="FAT FileSystem" datatype="string" />
<parm name="Paging" value="1" datatype="integer" />
<parm name="Util" value="fatutil.dll" datatype="string" />
</characteristic>
<characteristic type="HKLM\Drivers\BuiltIn\SDHC">
<parm name="CardDetect_Thread_Priority" value="152" datatype="integer" />
<parm name="CardDetectControlFlag" value="0" datatype="integer" />
<parm name="CardDetectControlMask" value="-3073" datatype="integer" />
<parm name="CardDetectFlag" value="0" datatype="integer" />
<parm name="CardDetectGPIO" value="F" datatype="string" />
<parm name="CardDetectMask" value="32" datatype="integer" />
<parm name="CardDetectPullupFlag" value="32" datatype="integer" />
<parm name="CardDetectPullupMask" value="-33" datatype="integer" />
<parm name="CardReadWriteControlFlag" value="0" datatype="integer" />
<parm name="CardReadWriteControlMask" value="-3145729" datatype="integer" />
<parm name="CardReadWriteFlag" value="256" datatype="integer" />
<parm name="CardReadWriteGPIO" value="H" datatype="string" />
<parm name="CardReadWriteMask" value="256" datatype="integer" />
<parm name="CardReadWritePullupFlag" value="64" datatype="integer" />
<parm name="CardReadWritePullupMask" value="-65" datatype="integer" />
<parm name="DMA_IST_Priority" value="150" datatype="integer" />
<parm name="DMAChannel" value="0" datatype="integer" />
<parm name="DMAIrq" value="36" datatype="integer" />
<parm name="DmaTransferTimeoutConstant" value="12288" datatype="integer" />
<parm name="DmaTransferTimeoutFactor" value="8" datatype="integer" />
<parm name="HandleBusyFinishOnCommand38" value="1" datatype="integer" />
<parm name="Order" value="33" datatype="integer" />
<parm name="PollingTimeout" value="256" datatype="integer" />
<parm name="Prefix" value="SDH" datatype="string" />
<parm name="SDIO_IST_Priority" value="151" datatype="integer" />
<parm name="SDIOIrq" value="30" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Comm\TNETWLN1\Parms">
<parm name="Dot11SupportedRateMaskG" value="8" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
better search for sth else... (there was a topic how to increase sound vol)

what else is modified?

opengl dll file, threaded sms, sound files, arcsoft mms config... see the cab config...

Related

Making a .cab with mms/gprs settings?

Hello all!
I have a WWE Qtek 9100 and i live in Greece. Every time i do a hard reset i have to type in 9100 all mms and gprs settings. This is very boring and gets a lot of time.
My question is, if there is any way to save these settings into .cab so after the hard reset the only thing we have to do is to run the file?
Thanks in advance for your time,
Bill

bill_viper said:
Hello all!
I have a WWE Qtek 9100 and i live in Greece. Every time i do a hard reset i have to type in 9100 all mms and gprs settings. This is very boring and gets a lot of time.
My question is, if there is any way to save these settings into .cab so after the hard reset the only thing we have to do is to run the file?
Thanks in advance for your time,
Bill
Click to expand...
Click to collapse
yes there is, look on the ftp for UK gprs settings CAB. Inside there is a XML file called _setup.xml that contains those, you can port that to your needs. I also am super irritated to have to enter that again and again every time, started porting it for my operator but no time to complete it yet.. someday
basically it looks like this fot T mobile UK, with your highly evolved brain and expert pc skills you can port it ;-)
Code:
<wap-provisioningdoc>
<characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="AppName" value="T-Mobile UK Settings" />
<parm name="NumDirs" value="0" />
<parm name="NumFiles" value="0" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="0" />
<parm name="NumShortcuts" value="0" />
</characteristic>
<characteristic type="FileOperation" />
<characteristic type="Registry" />
<characteristic type="Registry">
<characteristic type="HKLM\Software\Microsoft\Splash Screen">
<parm name="CarrierBitmap" value="\Storage\Application Data\Home\abcde.bmp" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="2" value="55393" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="TotalSettings" value="2" datatype="integer" />
<parm name="DefaultSetting" value="2" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI">
<parm name="ConnectionVia" value="Secure WAP Network" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\55393">
<parm name="SendDefault" value="102400" datatype="integer" />
<parm name="RecvDefault" value="102400" datatype="integer" />
<parm name="MmscURI" value="http://mmsc.t-mobile.co.uk:8002" datatype="string" />
<parm name="Gateway" value="149.254.211.10" datatype="string" />
<parm name="Name" value="T-Mobile MMSC" datatype="string" />
<parm name="GatewayPort" value="9201" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Security\ECall">
<parm name="List" value="911*999*112*000*111*" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\nls">
<parm name="DefaultLCID" value="2057" datatype="integer" />
<parm name="SystemLCID" value="1033" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="clock">
<parm name="TimeZone" value="85" />
</characteristic>
<characteristic type="BrowserFavorite">
<characteristic type="T-Mobile WAP">
<parm name="URL" value="http://wap.t-mobile.co.uk/" />
</characteristic>
<characteristic type="t-zone">
<parm name="URL" value="http://www.t-zones.co.uk" />
</characteristic>
<characteristic type="Club i-mate">
<parm name="URL" value="http://www.clubimate.com" />
</characteristic>
<characteristic type="Carrier Devices">
<parm name="URL" value="http://www.carrierdevices.com" />
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile MMS">
<parm name="DestId" value="{F28D1F74-72BE-4394-A4A7-4E296219390C}" />
<parm name="UserName" value="user" />
<parm name="Password" value="one2one" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile Internet">
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="UserName" value="user" />
<parm name="Password" value="one2one" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile WAP">
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="UserName" value="user" />
<parm name="Password" value="wap" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_PPPEntries">
<characteristic type="T-Moible WAP CSD">
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="Phone" value="+447953968999" />
<parm name="UserName" value="user" />
<parm name="Password" value="wap" />
</characteristic>
</characteristic>
<characteristic type="CM_ProxyEntries">
<characteristic type="T-Mobile Proxy">
<parm name="SrcId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="Proxy" value="149.254.1.10:9201" />
<parm name="Type" value="2" />
</characteristic>
</characteristic>
<characteristic type="CM_Planner">
<characteristic type="PreferredConnections">
<parm name="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" value="T-Mobile WAP" />
<parm name="{F28D1F74-72BE-4394-A4A7-4E296219390C}" value="T-Mobile MMS" />
<parm name="{436EF144-B4FB-4863-A041-8F905A62C572}" value="T-Mobile Internet" />
</characteristic>
</characteristic>
</wap-provisioningdoc>

I dont get it
how can I find this file? and how to comile it to a CAB file?

XML File

Can some one help me here i can not get this to work!!! It tells me that the the end tag and the starting tag are not right but i can not find what is wrong!!! GGGGRRRR
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="2" value="55393" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="TotalSettings" value="2" datatype="integer" />
<parm name="DefaultSetting" value="2" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI">
<parm name="ConnectionVia" value="Secure WAP Network" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\55393">
<parm name="SendDefault" value="102400" datatype="integer" />
<parm name="RecvDefault" value="102400" datatype="integer" />
<parm name="MmscURI" value="http://mmsc.t-mobile.co.uk:8002" datatype="string" />
<parm name="Gateway" value="149.254.211.10" datatype="string" />
<parm name="Name" value="T-Mobile MMSC" datatype="string" />
<parm name="GatewayPort" value="9201" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="CM_Networks">
<characteristic type="T-Mobile Internet">
<parm name="DestId" value="{128CD846-1169-4130-8551-F9DF71095F77}" />
</characteristic>
</characteristic>
<characteristic type="CM_ProxyEntries">
<characteristic type="HTTP-{128CD846-1169-4130-8551-F9DF71095F77}">
<parm name="SrcId" value="{128CD846-1169-4130-8551-F9DF71095F77}" />
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="Proxy" value="new-inet:1159" />
<parm name="Type" value="0" />
<parm name="Enable" value="1" />
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile Internet">
<parm name="DestId" value="{128CD846-1169-4130-8551-F9DF71095F77}" />
<parm name="Enabled" value="1" />
<parm name="UserName" value="t-mobile" />
<parm name="Password" value="tm" />
<parm name="Domain" value="" />
<parm name="SpecificIpAddr" value="0" />
<parm name="IpAddr" value="" />
<parm name="SpecificNameServers" value="0" />
<parm name="DnsAddr" value="" />
<parm name="AltDnsAddr" value="" />
<parm name="WinsAddr" value="" />
<parm name="AltWinsAddr" value="" />
<characteristic type="DevSpecificCellular">
<parm name="BearerInfoValid" value="1" />
<parm name="GPRSInfoValid" value="1" />
<parm name="GPRSInfoProtocolType" value="2" />
<parm name="GPRSInfoL2ProtocolType" value="PPP" />
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
<parm name="GPRSInfoAddress" value="" />
<parm name="GPRSInfoDataCompression" value="1" />
<parm name="GPRSInfoHeaderCompression" value="1" />
<parm name="GPRSInfoParameters" value="" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile MMS">
<parm name="DestId" value="{F28D1F74-72BE-4394-A4A7-4E296219390C}" />
<parm name="UserName" value="user" />
<parm name="Password" value="one2one" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
<characteristic type="CM_Planner" >
<characteristic type="PreferredConnections">
<parm name="{436EF144-B4FB-4863-A041-8F905A62C572}" value="T-Mobile Internet" />
<parm name="{F28D1F74-72BE-4394-A4A7-4E296219390C}" value="T-Mobile MMS" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
And I am just about to hit a mile stone of 200 posts!!!

End tag 'wap-provisioningdoc' does not match the start tag 'characteristic'. Error processing resource ..
this "should" work (added an extra characterestic end-tag)
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="2" value="55393" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="TotalSettings" value="2" datatype="integer" />
<parm name="DefaultSetting" value="2" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI">
<parm name="ConnectionVia" value="Secure WAP Network" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\55393">
<parm name="SendDefault" value="102400" datatype="integer" />
<parm name="RecvDefault" value="102400" datatype="integer" />
<parm name="MmscURI" value="http://mmsc.t-mobile.co.uk:8002" datatype="string" />
<parm name="Gateway" value="149.254.211.10" datatype="string" />
<parm name="Name" value="T-Mobile MMSC" datatype="string" />
<parm name="GatewayPort" value="9201" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="CM_Networks">
<characteristic type="T-Mobile Internet">
<parm name="DestId" value="{128CD846-1169-4130-8551-F9DF71095F77}" />
</characteristic>
</characteristic>
<characteristic type="CM_ProxyEntries">
<characteristic type="HTTP-{128CD846-1169-4130-8551-F9DF71095F77}">
<parm name="SrcId" value="{128CD846-1169-4130-8551-F9DF71095F77}" />
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="Proxy" value="new-inet:1159" />
<parm name="Type" value="0" />
<parm name="Enable" value="1" />
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile Internet">
<parm name="DestId" value="{128CD846-1169-4130-8551-F9DF71095F77}" />
<parm name="Enabled" value="1" />
<parm name="UserName" value="t-mobile" />
<parm name="Password" value="tm" />
<parm name="Domain" value="" />
<parm name="SpecificIpAddr" value="0" />
<parm name="IpAddr" value="" />
<parm name="SpecificNameServers" value="0" />
<parm name="DnsAddr" value="" />
<parm name="AltDnsAddr" value="" />
<parm name="WinsAddr" value="" />
<parm name="AltWinsAddr" value="" />
<characteristic type="DevSpecificCellular">
<parm name="BearerInfoValid" value="1" />
<parm name="GPRSInfoValid" value="1" />
<parm name="GPRSInfoProtocolType" value="2" />
<parm name="GPRSInfoL2ProtocolType" value="PPP" />
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
<parm name="GPRSInfoAddress" value="" />
<parm name="GPRSInfoDataCompression" value="1" />
<parm name="GPRSInfoHeaderCompression" value="1" />
<parm name="GPRSInfoParameters" value="" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile MMS">
<parm name="DestId" value="{F28D1F74-72BE-4394-A4A7-4E296219390C}" />
<parm name="UserName" value="user" />
<parm name="Password" value="one2one" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
<characteristic type="CM_Planner" >
<characteristic type="PreferredConnections">
<parm name="{436EF144-B4FB-4863-A041-8F905A62C572}" value="T-Mobile Internet" />
<parm name="{F28D1F74-72BE-4394-A4A7-4E296219390C}" value="T-Mobile MMS" />
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Now it opens and doesn't give me an error..
If the format is correct I don't know.
The proof is in eating the xml-pudding

Merci will give a go right now!

Congrats on 200 - but 1000 is party time! lol

Deleted as I moved this

Creating installation cab (file ops) with registry tweaks

Hi, after looking for long time on this forum and on google, I'm stuck
I'm looking a way, with tools MAKECAB, to create an autoinstall file with registry tweak.
The goal is to purpose an addons for TF3D Config, and auto apply all tweaks during installation process.
So
I already have this :
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\System\GDI\GLYPHCACHE">
<parm name="limit" value="131072" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="ACResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="BattResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P6">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P8">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P9">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\Phone">
<parm name="Vol" value="34952" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockEnable" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockTimeout" value="5" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I just want to copy a file name tweaks_custom.xml to TF3D Install directory
Here my try :
Code:
<wap-provisioningdoc>
<characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="OSVersionMin" value="4.0" />
<parm name="OSVersionMax" value="6.99" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="Celogeek TF3D Custom Tweaks" />
<parm name="InstallDir" value="%CE1%\Diamond TF3D Config" translation="install" />
<parm name="NumDirs" value="1" />
<parm name="NumFiles" value="1" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="14" />
<parm name="NumShortcuts" value="0" />
</characteristic>
<characteristic type="FileOperation">
<characteristic type="%CE1%\Diamond TF3D Config" translation="install">
<characteristic type="MakeDir" />
<characteristic type="tweaks_custom.xml" translation="install">
<characteristic type="Extract">
<parm name="Source" value="ctweaks.001" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\System\GDI\GLYPHCACHE">
<parm name="limit" value="131072" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="ACResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="BattResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P6">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P8">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P9">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\Phone">
<parm name="Vol" value="34952" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockEnable" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockTimeout" value="5" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
How can I pack it to a cab, and make it work ?

rename it _setup.xml
use makecab.exe like this from command line:
makecab.exe _setup.xml cabfilename.cab
your second xml doesn't look wellformed to me, it should begin like the first one with <wap-provisioningdoc> among other things.

geistteufel said:
How can I pack it to a cab, and make it work ?
Click to expand...
Click to collapse
Take a look in this thread...
http://forum.xda-developers.com/showthread.php?t=409306

ok thanks
its for registry tweak only
I know how to do that
I was looking for a free and easy way (no installing visual studio or big soft), to make installer with local file in cab and registry tweaks
for registry I have found makecab, work fine, under windows.
for copie file with local resource (in the cab), I have found pocketpc-cab (on linux)
I'm not really happy to go and back, and make 2 soft ...
WinCE Cab was my better solution, but it's not free.
how can I make it for free ?

HTC Hotfix for sms not sounding (Diamond2)

Can someone find out what does this fix do? Many people have this problem on HD too.
http://www.htc.com/asia/SupportDownload.aspx?p_id=249&cat=0&dl_id=592

xml
I found this XML after "unzip" the hotfix .exe. It appears not to be some simple registry settings. As i understand there are some files that will be overwrite, especially rilphone.dll.
¿Does HD and TD2 share hardware? I assume that will allow us to try this files...
<wap-provisioningdoc>
<characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="SetupDLL" value="1" />
<parm name="OSVersionMin" value="3.0" />
<parm name="OSVersionMax" value="4.21" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="UnsupportedPlatforms" value="JUPITERHPC" />
<parm name="AppName" value="HotFix TOP05002" />
<parm name="InstallDir" value="%CE1%\TOP05002" translation="install" />
<parm name="NumDirs" value="2" />
<parm name="NumFiles" value="6" />
<parm name="NumRegKeys" value="1" />
<parm name="NumRegVals" value="1" />
<parm name="NumShortcuts" value="0" />
</characteristic>
<characteristic type="FileOperation">
<characteristic type="\temp" translation="install">
<characteristic type="MakeDir" />
<characteristic type="rilphone.dll" translation="install">
<characteristic type="Extract">
<parm name="Source" value="rilphone.001" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="\Windows" translation="install">
<characteristic type="MakeDir" />
<characteristic type="CM_Entries.xml" translation="install">
<characteristic type="Extract">
<parm name="Source" value="CM_ENT~1.002" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
<characteristic type="CheckFile.exe" translation="install">
<characteristic type="Extract">
<parm name="Source" value="CHECKF~1.003" />
<parm name="NoSkip" />
</characteristic>

I posted a method of fixing the SMS issue on the touch HD a few weeks back that works 100%, so you might want to search for that before HTC release a fix for us or someone ports the diamond 2 fix

spud_work said:
I posted a method of fixing the SMS issue on the touch HD a few weeks back that works 100%, so you might want to search for that before HTC release a fix for us or someone ports the diamond 2 fix
Click to expand...
Click to collapse
Thanks for the tip but before posting i searched all over the forum and not find any solution. Only "workarounds". Just in case someone find the workarounds useful they can find it here. Your post suggest the need to set to on the "wake up on sms" and install third party software. This is about a solution that the manufacter provided to other device to have the behavior that the device was design for (to have sms sound without having to leave standby mode)...i would like to get the feature that i payed HTC for ...
thanks!

GPRS provisioning XML

Hi there,
this makes me crazy, I was trying to make a xml provisioning file for my GPRS settings (O2 UK pay as you go) as the settings from connection setup are not correct...
The correct one is:
APN: payandgo.o2.co.uk
Name: payandgo
Password: password
Proxy:
HTTP: 193.113.200.195:8080
WAP: 193.113.200.195:9201
SOCKS: 193.113.200.195:1080
After spending a lot of times on:
http://forum.xda-developers.com/showthread.php?t=414566
http://wiki.xda-developers.com/index.php?pagename=How to Create a GPRS Connections CAB: XML Method
I came up with the file below:
Code:
<wap-provisioningdoc>
<characteristic type="CM_Networks">
<characteristic type="O2 Prepaid Settings">
<parm name="DestId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="O2 Prepaid">
<parm name="DestId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
<parm name="Enabled" value="1" />
<parm name="UserName" value="payandgo" />
<parm name="Password" value="password" />
<parm name="Domain" value="" />
<parm name="SpecificIpAddr" value="0" />
<parm name="IpAddr" value="" />
<parm name="SpecificNameServers" value="0" />
<parm name="DnsAddr" value="" />
<parm name="AltDnsAddr" value="" />
<parm name="WinsAddr" value="" />
<parm name="AltWinsAddr" value="" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoValid" value="1" />
<parm name="GPRSInfoAccessPointName" value="payandgo.o2.co.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_ ProxyEntries">
<characteristic type="null-corp-{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}">
<parm name="SrcId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
<parm name="DestId" value="{A1182988-0D73-439E-87AD-2A5B369F808B}" />
<parm name="Proxy" value="new-corp:1118" />
<parm name="Type" value="0" />
<parm name="Enable" value="1" />
</characteristic>
<characteristic type="HTTP-{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}">
<parm name="SrcId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="Proxy" value="193.113.200.195:8080" />
<parm name="Type" value="1" />
<parm name="Enable" value="1" />
</characteristic>
<characteristic type="WAP-{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}">
<parm name="SrcId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="Proxy" value="193.113.200.195:9201" />
<parm name="Type" value="2" />
<parm name="Enable" value="1" />
</characteristic>
<characteristic type="WTLS-{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}">
<parm name="SrcId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
<parm name="DestId" value="{F28D1F74-72BE-4394-A4A7-4E296219390C}" />
<parm name="Proxy" value="193.113.200.195:9203" />
<parm name="Type" value="3" />
<parm name="Enable" value="1" />
</characteristic>
<characteristic type="SOCKS-{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}">
<parm name="SrcId" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" />
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="Proxy" value="193.113.200.195:1080" />
<parm name="Type" value="4" />
<parm name="Enable" value="1" />
</characteristic>
</characteristic>
<characteristic type="CM_Planner">
<characteristic type="PreferredConnections">
<parm name="{436EF144-B4FB-4863-A041-8F905A62C572}" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}"/>
<parm name="{A1182988-0D73-439e-87AD-2A5B369F808B}" value=""/>
<parm name="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" value=""/>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="DefaultSetting" value="SampleMMSC" datatype="string"/>
</characteristic>
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\SampleMMSC">
<parm name="Name" value="O2 MMS" datatype="string"/>
<parm name="MmscURI" value="http://mmsc.mms.o2.co.uk:8002" datatype="string"/>
<parm name="Gateway" value="193.113.200.195" datatype="string"/>
<parm name="GatewayPort" value="9201" datatype="integer"/>
<parm name="waptype" value="0" datatype="integer"/>
<parm name="SendDefault" value="307200" datatype="integer"/>
<parm name="ConnectionVia" value="{0112BB3C-ECF5-4dc5-A26D-51A4558CF756}" datatype="string"/>
<parm name="WAP1SendDefaultSize" value="307200" datatype="integer"/>
<parm name="WAP2SendDefaultSize" value="307200" datatype="integer"/>
<parm name="ISP" value="SampleMMSC" datatype="string"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
I use SASHIMI to provision the file...it did go thru.. the MMS part is ok...GPRS is partly ok with the APN, user name and password went to the right place..
But nothing goes to the Proxy part, there is a check in the "this network connects to the Internet" under the new setting but "this network uses a proxy server to connect to the Internet" is unchecked and nothing in the proxy server field..
and also, the <characteristic type="CM_Planner"> doesn't seem to work as well, under network management, "auto connect to the internet" part still stays with the default "My ISP" but not the new setting..
btw, I'm on a wm 6.5 ROM (Topix 3.3)
Can anyone help me to check my code and shine some light on me plz!!! thanks a lot and happy new year

bump, anyone reading this??

You have a typo. Use "CM_ProxyEntries" instead of "CM_ ProxyEntries".

Database Users

welcome

.cab to increase x1 sound - XPERIA X1 General

i found this while i was surfing some arabic SE forum and i wanted to share as I was looking for it and i think some of u may be looking for a cab to raise the volume I tried it and it worked I don't know what version or is it still beta but here it is

i do not have my xperia x1 atm but can anyone esle comfirmation that this works?

what else is modified?

opengl dll file, threaded sms, sound files, arcsoft mms config... see the cab config...

Related

Making a .cab with mms/gprs settings?

XML File

Creating installation cab (file ops) with registry tweaks

HTC Hotfix for sms not sounding (Diamond2)

GPRS provisioning XML

Categories

Resources