Database Users

Confirm KJAM bugs?

Can anyone else confirm these bugs I'm seeing?
ROM: 1.1.9.3
Radio: 01.01.10
ExtROM: 1.1.9.104
1. I've got a 1Gb Sandisk MiniSD inside with a ton of WMA files that synced over through Media Center 2005. If I'm playing them through Media Player 10.1, then stop and shut off the device for a while, when I turn back on.. Media Player doesn't remember what song it was at, and doesn't seem to recognize the library/playlist until I reselect it in the Library view. Has anyone else seen this happen?
2. On the Today screen I have a big triangle icon in the title bar that normally means I've registered on a GSM network. With previous Windows Mobile versions, it just shows up when registration is made and then goes away. For me it won't go away.
3. Sending MMS Messages on T-Mobile USA does not work. I have entered all the correct settings that worked with previous versions of MMS composer, but the MMS won't send. Has anyone found a registry edit or something to fix this?
4. MMS composer does not support soft keys. This is an obvious application bug. It looks so stupid having old legacy menus in the new Windows Mobile 5 Inbox application.
5. Connections don't show up in the Connectivity bubble on the title bar icon. I have a T-Mobile USA GPRS connection set up in the connections control panel, but it doesn't show up in the Connectivity bubble unless it's connected. There's a disconnect button when it's connected, but no connect button when not.
6. Skype doesn't launch. I've done a hard reset, and the default installation of Skype does not open at all.
7. Power control panel doesn't support moving between tabs using the Directional Button.
8. No way to set the device to complete power off mode.
9. PhonePad SIP occasionally will not open. SIP reverts back to previously used SIP method.
10. Can't navigate between levels in Media Player 10 Library mode.
I think the first 5 are the most important to me. Please feel free to add other bugs to this list.

Nobody else sees any of these problems?
I figured out #3 and #8.
I'm also seeing occasional phone problems, like not updating the reception level in dead spots and taking much longer to re-register on the network after leaving a dead spot.
Soft resetting takes way too long as well.

can only answer the non-local questions (i'm in the uk)
and havn't tried all you are talking about.
media player does not remember where you were,
skype does work for me,
can turn the unit completely off.
i know that is only 3 from your list, but it is a start.

to turn the device off completly you need to hold the power button down until a message comes on the display then click ok and it will power off. to switch it back on hold the power button down until it comes back on

Can anyone else confirm these bugs I'm seeing?
ROM: 1.1.9.3
Radio: 01.01.10
ExtROM: 1.1.9.104
2. On the Today screen I have a big triangle icon in the title bar that normally means I've registered on a GSM network. With previous Windows Mobile versions, it just shows up when registration is made and then goes away. For me it won't go away.
> It's a compulsory feature of Windows Mobile 5!
3. Sending MMS Messages on T-Mobile USA does not work. I have entered all the correct settings that worked with previous versions of MMS composer, but the MMS won't send. Has anyone found a registry edit or something to fix this?
> T-Mobile USA have not enabled K-JAM access to the MMSC
5. Connections don't show up in the Connectivity bubble on the title bar icon. I have a T-Mobile USA GPRS connection set up in the connections control panel, but it doesn't show up in the Connectivity bubble unless it's connected. There's a disconnect button when it's connected, but no connect button when not.
> This is yet another compulsory Windows Mobile 5 feature
6. Skype doesn't launch. I've done a hard reset, and the default installation of Skype does not open at all.
> Makes you wonder what sort of muppets run Imate, doesn't it?
8. No way to set the device to complete power off mode.
> Hold down power button for 4 seconds. It's the first Windows Mobile PDA to do this BTW....
I think the first 5 are the most important to me. Please feel free to add other bugs to this list

I had a devil of a time getting MMS to work on TMO USA. Finally someone on HoFo PPC Forum suggested that I use the T-Mobile USA Settings .cab file on Club iMate under Wizard Support, Operator Settings. This did not work the first time but after a hard reset, I installed this .cab first thing and then MMS worked with no more problems so far.
The No Conections thing is my biggest beef with the Wizard as I have several apps that will not initiate a GPRS connection under WM5. Having to start PIE to establish a connection is just plain stupid. They should have put a GPRS button in Connection Manager instead of an Active Sync button. At least you can end a GPRS connection by holding down the End button for about 5 secs.
Hope this helps.

Forget to mention about Softkeys support. I hope what you mention is simply an oversight on the part of the app developer. I hope that as apps get upgraded to WM5 and as new apps get written that developers will pay attention and allow softkey and d-pad access to menus, exit button, etc. I personally hate to have to pull out and fumble with a stylus, especially to do one simple thing on an app that could have provided d-pad support.

wanna to know before buy
how about the camera quality? any chance if anyone kindly post some demo pic taken by Wizard....
Also the CPU performance is that fast? whether Skype in the default installed out of the factory?
ManyTHx

I think that the camera quality is about equivalent to the Treo 650, better than the Jam or Eten 500. But I haven't used it enough to check out all its features.
The CPU performance is adequate with a small number of apps running - not as crisp feeling or nearly as fast as my Samsung i730 which is the fastest PPC I have used to date. However, the battery life is very good - much better than the 730. I think that the KJAM is a nice trade off between performance and battery life.
Skype is included in ROM from the factory. I know nothing about it as I deleted it from the Extended Rom, along with the anti-virus and smart dialer apps.

Re: wanna to know before buy
dc429uk said:
how about the camera quality? any chance if anyone kindly post some demo pic taken by Wizard....
Also the CPU performance is that fast? whether Skype in the default installed out of the factory?
ManyTHx
Click to expand...
Click to collapse
http://pocketnow.com/index.php?a=portal_detail&t=reviews&id=710&p=2
The second page of my review above has some camera quality and full-resolution examples (towards the bottom).
CPU performance is not as fast as the imate JAM, but the battery life is way better.

adamz said:
1. I've got a 1Gb Sandisk MiniSD inside with a ton of WMA files that synced over through Media Center 2005. If I'm playing them through Media Player 10.1, then stop and shut off the device for a while, when I turn back on.. Media Player doesn't remember what song it was at, and doesn't seem to recognize the library/playlist until I reselect it in the Library view. Has anyone else seen this happen?
Click to expand...
Click to collapse
Looks like I found a way to fix that problem! Reformatting the MiniSD card and re-syncing with Media Center 2005 seems to have fixed it. Now Media Player 10.1 on my KJAM remembers which track was playing between suspend sessions.

anyone autoreset only his k-jam ?¿?
regards

8. No way to set the device to complete power off mode.
Hold down power button for 4 seconds. It's the first Windows Mobile PDA to do this BTW.......
If I do this, Will I lost all data (as the pop up message say so ? )
thanks

You will lose data if the any applications that are running (that are not designed for WM5) and dont flush their data when they receive notification that the system is about to be powered off. But in general it should be ok.
Paul

ISSUE : "Cannot connect. End current phone call.."

This is me trying to force a connection to the internet, but it wont cause it thinks its on a call. This is not good if you want emails coming down.
The only way I know how to over come this issue is to to a soft reset.
There has been no previous call. I open phone is inactive, I hit the red phone button. Nothing removes this obstruction.
Any ideas, how I can detect this or overcome this without doing a soft reset.
Q: How does one do a hard reset ??

Re: ISSUE : "Cannot connect. End current phone call..&q
Digs said:
This is me trying to force a connection to the internet, but it wont cause it thinks its on a call. This is not good if you want emails coming down.
The only way I know how to over come this issue is to to a soft reset.
There has been no previous call. I open phone is inactive, I hit the red phone button. Nothing removes this obstruction.
Any ideas, how I can detect this or overcome this without doing a soft reset.
Q: How does one do a hard reset ??
Click to expand...
Click to collapse
I have the same problem. this issue comes when I've made a phone call and then I want to make a data session. my only workaround was is not to install programs like SPB GPRS monitor/etc...
If I'll have time, I'll install the newest ROM (the one that supports A2DP) and see wether the problem still exists or not...

I thought I had the newest ROM see my specs in signature. is that not correct. Whats this about A2DP ???
see here
For the Worldwide English Build: NEW
Rom version: 1.30.76
Radio version: 1.09.00
ExtROM version: 1.30.164
To download the WWE ROM JASJAR_WWE_13076_164_10900_wwe_ship.zip
http://www.clubimate.com/t-DEVICE_JASJAR_UPD.aspx

Re: ISSUE : "Cannot connect. End current phone call..&q
Digs said:
This is me trying to force a connection to the internet, but it wont cause it thinks its on a call. This is not good if you want emails coming down.
The only way I know how to over come this issue is to to a soft reset.
There has been no previous call. I open phone is inactive, I hit the red phone button. Nothing removes this obstruction.
Any ideas, how I can detect this or overcome this without doing a soft reset.
Q: How does one do a hard reset ??
Click to expand...
Click to collapse
One solution to this is to use 3G (UMTS) instead of regular GPRS (GSM). 3G lets you use both data and voice connections at the same time. If you dont have 3G in the area (not sure why you bought a universal..) then you can try hard resetting by holding down the left and right softkeys (two buttons with -s) and pressing in the soft reset button.

Re: ISSUE : "Cannot connect. End current phone call..&a
RyanZA said:
Digs said:
This is me trying to force a connection to the internet, but it wont cause it thinks its on a call. This is not good if you want emails coming down.
The only way I know how to over come this issue is to to a soft reset.
There has been no previous call. I open phone is inactive, I hit the red phone button. Nothing removes this obstruction.
Any ideas, how I can detect this or overcome this without doing a soft reset.
Q: How does one do a hard reset ??
Click to expand...
Click to collapse
One solution to this is to use 3G (UMTS) instead of regular GPRS (GSM). 3G lets you use both data and voice connections at the same time. If you dont have 3G in the area (not sure why you bought a universal..) then you can try hard resetting by holding down the left and right softkeys (two buttons with -s) and pressing in the soft reset button.
Click to expand...
Click to collapse
This solution is not a right solution for me: when the Qtek is unable to create GPRS connections, it's also unable to create UMTS data connections. It says that there isn't modem on the other end of the line, etc...
The newest ROM is: WWE
1.30.77
1.30.1641.09.00
The other comment is that to use data and voice connections at the same time the network must be also capable of doing this.

Club Imate seam to be slow in posting new ROM they still show this ROM as the latest..
link above
see here
For the Worldwide English Build: NEW
Rom version: 1.30.76
Radio version: 1.09.00
ExtROM version: 1.30.164

I have the same issue sometimes ... I usually over come it using connmngr to switch the phone off then on again ... the pain with this issue is that you don't know it's stopped unless you try to make a call or GPRS session :x

I am going to have to code something up Skschema to ensure 100% a connection every time on re freshing internet link.
Logic
Run Command Com
Turn off phone
Turn on phone
Run GSM connection
I also get other error messages like
- Cannot connect to modem at other end
- No modem found at other end.
The main point is if you dont have 4 strong bars showing internet connection will always be risky.
And as the Jas Jar ( O2 Exec ) cant have a direct fixed connection via the GSM jack on the phone, its only assistence can come from a wireless repeater for home use, and if you are mobile then the Booster cant be found as a fixed GSM connection cant be made to the device.
A repeater is not a booster.
A repeater is for home use when you are not moving. Hence wireless is ok. This is more for signal sending not receiving
A signal booster is required for mobile use and a direct connection to device is required ( not available to Jas Jar as yet). This is for both receiving and sending. Direct connection is the best option.
MAIN POINT : The manufactures should have done extreme testing with low bars signal ( say two ) as well as high signal ( say 4 bars ), with the use of signal repeaters and boosters, AND THIRD PARTY ADAPTERS....which they obviously did not do....

How can I fix my WiFi problem?

I have not been able to turn on wifi reliably for ages now - It all started when I upgraded to WM5. Now (even if I downgrade to wm2003se) I cannot turn it on. I press the wifi on button, the cursor comes up but nothing happens), leave it for a couple of hours, and then press again - it will sometimes turn on. It then stays on for about 30 mins, and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
hardint0110

What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.

TheWizzard2203 said:
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
Click to expand...
Click to collapse
Dont seem to have the directory Tnetwln1
I am using a Blue Angel with xplode wm5 AKU 3.5.2 rom kitchen 2

i do have a directory called tiacwln1, and another called tiacwln.
I have attached them here, so you can have a look yourself:
(rename .doc to .reg if you need to)

Thought I had some progress there, but now all is back to normal...

Still no luck... found this: http://www.teksoftco.com/forum/viewtopic.php?t=194
but it wont turn WiFi on and off.

WIFI does not run on Wizard
I have not been able to turn on wifi reliably for ages now
I press the wifi on button, the cursor comes up but nothing happens), it will sometimes turn on. It then stays on for about 1 - 5 seconds, and shows connecting BUT DOES NOT CONNECT and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
Copied a part of the Message from the ORIGINAL THREAD
Thanx In advance
-jeasbe'

Thank you
The registry jack worked 4 me i don't know how to thank you really you helpde me a lot

No Luck..Need to USE THIS URGENT
I tried it but on Reboot My settings return back from
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
RETURNS BACK to
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 0
___________________________________________
The other setting
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Stays same

And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.

No Luck
Stevos said:
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
Click to expand...
Click to collapse
Of course, That's what I said that "I tried it but on Reboot My settings return back "
After the Reboot/ ie after the Soft reset.
No Luck

I have the same problem.
the value change back to 0 after soft-reset.
I tried several times even waiting for some minutes before soft-resetting.

So it means ??
NO LUCK ??
~smile~

@jeasbe: I just wanted to second your finding...
Actually I suspect some hardware/EEPROM issue like this (Hermes):
http://forum.xda-developers.com/showthread.php?t=304004
this is my story:
1. Got the Dopod from the provider with Chinese ROM (living in mainland China at the moment). Did not test WiFi.
2. After strongly insisting on an English GUI I got an update to an English ROM from the provider. Since then no WiFi
3. Asked the provider about WiFi on my Dopod. He confirmed that it was not working but had been working with the Chinese ROM before.
.... (so excluded user problem but still no solution)
4. Decided to upgrade by myself assuming the problem lies in the ROM version.
.... Upgraded step-by-step with the various ROM versions to XM6 according to tutorial 'n checked for each ROM version for WiFi. Still no WiFi.
5. Installed the WiFi patch for the commgr. No WiFi.
6. Read about that registry hack. Values do not remain after soft-reset. No WiFi.
7. Colleagues have the same problem (but still with the English ROM from the provider). So will ask one of them to hand-in to the provider to change back to Chinese ROM in order to see whether WiFi is working with that setting. But doubting it
8. any other ideas appreciated ...

another thread with similar issue:
http://forum.xda-developers.com/showthread.php?t=296936

It looks like the Hermes guys (Drummer) found a solution:
http://forum.xda-developers.com/showthread.php?t=322225
However, I am not an expert so don't whether it is possible the adapt the approach somehow to the Wizard.

any news here? ive got exactly the same problem

bug-i said:
any news here? ive got exactly the same problem
Click to expand...
Click to collapse
I found out that if you have a CHS version officially sold in China there is no WiFi feature in the phone - this rule applies for all models from any manufacturer.
I am not sure though whether it is really hardware (like missing the WLAN chip) or software issue (on a level below the ROM, because change to different ROM [incl. change of IPL/SPL and radio] won't help).

Trinity - multiple little problems

Hi,
First of all, I'm new here and I'm sorry if
a) These questions have been answered here 3748 times or
b) I have put this in the wrong forum/in the wrong format. I decided to group my questions together, in order to avoid cluttering the forum.
If a moderator feels I have posted this inappropriately, I'm happy to correct it, (eg. split this post into three).
So, that much for the disclaimer, don't shoot the noob
First question:
So, I bought a (used) trinity, pretty cheaply, and for the most part have been happy with it. Even got the GPS working, with the official update from the HTC website.
So, now that I knew how the rom flashing process went, I tried flashing the Indigo rom I downloaded from the forum. The problem is, I get stuck in the rom upgrade process, when the flashing is actually supposed to start. The PDA asks me to accept running the EnterBootLoader program, I accept, and the phone restarts, then, the system pops up with "connection lost, error 246 if I remember correctly". The phone returns to normal after a soft reset, so no harm done, but no good either. Is there some solution to this problem I am unaware of. Oh, the same happens when I try to flash hardspl too, so either, the current official ROM has some deviousness about it, or it's my computer. that is to blame.
Second question:
Two times now, my trinity's phone has played some tricks on me. First time, it showed an exclamation mark on the phone networking icon, the second time, all seemed normal, except, I couldn't access the phone settings, and when someone called me, to them it seemed I was just not picking up, but on my phone, nothing seemed to be going on. Is this normal, just another windows being windows, or could this be an indication of a hardware problem, or a problem with the dialer?
Third question:
When I first received the phone, it always tried to use GPRS or 3G to connect when I opened IE, even when there was a perfectly good WLAN connection connected. Upon ROM upgrade, all connection settings were lost. Originally, in the connection view, there were 2 or 3 sets of connection settings, now, there is only one.
- Am I supposed to add sets of settings there?
- I don't know where I am to add the 3g and GPRS settings?
- How do I set WLAN proxies, on the one set of settings I can see on connections, I can set a proxy, but it doesn't seem to work: at school, I can only see the internal network, but can't access the Internet.
I would also need to have two sets of proxy settings, one for school, one for home, is this possible?
Then, some spex from the phone, so you don't have to ask:
OS: WM5
ROM version: 1.23.403.2 (Offical, GPS enabled)
Radio version: 1.38.00.11
Protocol version: 32.71.7020.12H
ExtRom version: 1.23.405.103
Phone sold under name: HTC P3600
Finnish retail version.
Oh and on final note, this is an amazing forum, even if I started reading this a week before I got my phone, and have continued to do so ever since, the amount of information on any given subject related to PDAs and mobiles seems endless. I look forward in your insights in this matter.

Easy HTC Operator Configuration
Hi, if you have lost your Operator settings, there is an easy way
to set these settings :
You only need to download the operator configurator at http://www.planete-htc.com/index.php?mod=telechargements
It works well with Orange for me.
thanks to planete-htc
Hope this can help you.
Regards

botia said:
Hi,
First of all, I'm new here and I'm sorry if
a) These questions have been answered here 3748 times or
b) I have put this in the wrong forum/in the wrong format. I decided to group my questions together, in order to avoid cluttering the forum.
If a moderator feels I have posted this inappropriately, I'm happy to correct it, (eg. split this post into three).
So, that much for the disclaimer, don't shoot the noob
First question:
So, I bought a (used) trinity, pretty cheaply, and for the most part have been happy with it. Even got the GPS working, with the official update from the HTC website.
So, now that I knew how the rom flashing process went, I tried flashing the Indigo rom I downloaded from the forum. The problem is, I get stuck in the rom upgrade process, when the flashing is actually supposed to start. The PDA asks me to accept running the EnterBootLoader program, I accept, and the phone restarts, then, the system pops up with "connection lost, error 246 if I remember correctly". The phone returns to normal after a soft reset, so no harm done, but no good either. Is there some solution to this problem I am unaware of. Oh, the same happens when I try to flash hardspl too, so either, the current official ROM has some deviousness about it, or it's my computer. that is to blame.
Second question:
Two times now, my trinity's phone has played some tricks on me. First time, it showed an exclamation mark on the phone networking icon, the second time, all seemed normal, except, I couldn't access the phone settings, and when someone called me, to them it seemed I was just not picking up, but on my phone, nothing seemed to be going on. Is this normal, just another windows being windows, or could this be an indication of a hardware problem, or a problem with the dialer?
Third question:
When I first received the phone, it always tried to use GPRS or 3G to connect when I opened IE, even when there was a perfectly good WLAN connection connected. Upon ROM upgrade, all connection settings were lost. Originally, in the connection view, there were 2 or 3 sets of connection settings, now, there is only one.
- Am I supposed to add sets of settings there?
- I don't know where I am to add the 3g and GPRS settings?
- How do I set WLAN proxies, on the one set of settings I can see on connections, I can set a proxy, but it doesn't seem to work: at school, I can only see the internal network, but can't access the Internet.
I would also need to have two sets of proxy settings, one for school, one for home, is this possible?
Then, some spex from the phone, so you don't have to ask:
OS: WM5
ROM version: 1.23.403.2 (Offical, GPS enabled)
Radio version: 1.38.00.11
Protocol version: 32.71.7020.12H
ExtRom version: 1.23.405.103
Phone sold under name: HTC P3600
Finnish retail version.
Oh and on final note, this is an amazing forum, even if I started reading this a week before I got my phone, and have continued to do so ever since, the amount of information on any given subject related to PDAs and mobiles seems endless. I look forward in your insights in this matter.
Click to expand...
Click to collapse
OK third question seems answered. You should find network operator settings on the HTC website.
Second Question - try flashing a ROM / Radio ROM again and see if you still have the problem. (For that you'll need an answer to question One
First Question: if this happens, you should leave the phone in bootloader mode (three coloured bars on the screen) make sure it say USB at the bottom of the Trinity screen - make sure you're not using Vista as an OS - use XP. provided the above conditions are met, exit and run the Rom Upgrade Utility again. This time the progress bar should show - start moving - and your ROM will flash. Search Google for trinity guids on how to for vista if that's you case.

Thanks for the answers, first of all,
I actually found out one bit of the problem by searching the forum, it seems my firewall might have been the cause of the ActiveSync problems I've been having. The Kerio Personal firewall seemed to cause the rapimgr.exe to go into a loop, this might have caused problems to the Rom utility as well.
The strange thing is, this problem only stopped when I _uninstalled_ the KPF, not when I turned it off.
I will load the operator settings you mentioned
The only thing left is the WLAN proxy settings, how do I set them, and is there a way to have two sets of them, say, one for each network SSID?

Dead WiFi on my Touch HD. Possible reason: corrupted WiFi EEPROM.

MY problem is. The wifi won’t turn on, and when u go to wifi icon in the connection the turn on wifi won’t be ticked. I have tried a lot off rom and even back to the original Orange rom and spl, all the same didn’t change anything.
I’ve been advised that my WiFi EEPROM has been corrupted or blanked somehow, that's the usual cause.
I need to get hold of an EEPROM from another device and write it onto mine.
This problem has already been known and solution has been found for Hermes model (below is the link to that thread) :
http://forum.xda-developers.com/showthread.php?t=322225
Can anybody help me in my problem? I need tools (something similar used for Hermes model) and working Touch HD.
P.S. As I can see, by reading this forum, this is not only my problem.

I got the same problem as u, The wifi wont on and ticked.
But some times it will. I also doubt this is an hardware problem.
Because some time it will turn on and some times it wont.
any help here?

Now, I found My problem.
When ever I instaled any program. the wifi will stoped working.
is that software issue?
or hard ware issue?
But when I didnt instal any third application the wifi work perfectly, I have changed to several rom including 6.5 coocked.

i'm sorry to tell u this guys, because i used to have the same problem and even worse the camera used to show only blank screen and i my pc couldn't detect my HD via USB, so i searched for solutions but i couldn't find any. I guess the only solution for this problem is by replacing the main board by HTC so if ur mobile is still under warranty go and replace it as i did. I'm also afraid to face this problem again cuz i found that many people are having this problem. plz let me know if manneged to get it works without replacing the main board.

I am trying to attract our gurus' and moderators’ attention, because I believe that we can solve this problem without replacing mainboard. I also believe that HTC corp is making profit by receiving our some kind of broken mainboards, reflash them with the stock EEPROm and sell it as a new again.
Our gurus are spending their times to create bulk of custom ROMs, where at the same time solving such problem with WiFi, looks more interesting and challenging.
Also I understand that if we had real hardware problem, no Wi-Fi, no Bluetooth, nothing would work. But everything is OK, apart from Wi-Fi.
If we have done this for Hermes model, why not to do something for HD as well.

Intermittent wifi
I now also have this problem, having just received a replacement from Orange for my original HD, which I dropped resulting in a badly cracked screen. This first unit had no problem with wifi, and I used it regularly on my home network. I loaded up the new one with all the same software, and, lo and behold, the wifi has become intermittent. Sometimes it works fine, at others when I attempt to switch it on the wifi symbol appears at the top of the screen momentarily and then disappears again, and there are also periods when it won't switch on at all. I have been trying to detect some pattern to this, or if there is something specific that triggers it, but so far without success. I am close to asking Orange for another replacement, and the comments above re corrupted wifi eeprom reinforce this. I also would be interested to hear from the gurus about this issue.

Loads of people report the problem, here and on other sites, but HTC has never explained what was wrong with the returned units (simply swopping MoBos and sending them back) and neither has anyone shown what combination of things "triggers" it - if indeed there is a trigger. It may just be a QC issue.
There was an anecdotal suggestion that the BT/WiFi antennas are too close to the board, so despite the EM shielding running the two together could cause damage, but nobody's been able to replicate it (and I doubt they ever will, as it requires someone to intentionally fry a working handset - not a cheap way to prove a point!).

I've had this problem now for a while and even sent my phone back to HTC for repair. It came back to me about 3 weeks ago and they said they fixed it. I never tested it when I got it back (stupid, I know!) and recently found it not working again. Today I hard reset the phone and found it worked but then didn't after installing Copilot SatNav. Bugger!
Does anyone have a solution to this that doesn't involve sending the phone back because when HTC reboot the phone they'll find that it works (surprisingly as no software will ghave been loaded!)
Any ideas?

+1 No WIFI + Camera + Strange USB connection (IT IS SOFTWARE)
+1 No Wifi, No Camera and stupid USB
The USB works I can flash from computer so it must work.
The USB dosnt ussually work unless flashing.
The Wifi just wont go/stay on at all
6.5 Roms there is no Camera Icon
6.1 Roms when the Camera Icon is hit, nothing happins
This has to be fixable by software, I know I can get the USB working and it is ONLY software as I can Flash it through USB, and in Bootloader it shows up USB when connected. Note:- Also my battery wont charge from USB, testing to see if its battery problem soon, but semi sure it is Software problem, as it will charge a little bit when left in Bootloader mode all day.
PLEASE PLEASE PLEASE HELP, I brought my phone from China (actually came from Belgium) and I am from Australia, don't wanna send my phone a million miles away to Europe.
Edit: USB seems to be charging under Energy Rom and (I don't know if this helps) 1.17.25.09 Radio.

Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?

To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
First of all, thanks Noonski to stop by to check out this thread
My rom is the official 1.56.405.1 WWE Wm6.1 ROM
Even wrlsmgr cant switch my wifi on.
My wifi worked initially then started niggling, the whole switch on, switch off thing, and now it doesnt switch on at all...
Oh and my reg key at the location is the same
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511
I have tried quite a few roms now including doing MTTY task 29 to format phone and load new roms from sd card followed by 2 hard resets...

Ai, wouldn't know where to go for MTTY and hardware issues.
I do remember the Dying radio on the original XDA issue, so it's not improbable.
I'll make this temp Sticky to see if it get's some attention by others.

My WIFI is dead also....but thank god I got dataplan....but I still wished someone can solve it.

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Click to expand...
Click to collapse
Just to confirm that Blackstone Wifi has the same GUID as shown here above. My Wifi is still working, official stock ROM 1.56.401 WWE, radio version 1.13, no ROM or radio flashes performed so far (other than official ROM upgrade) ...

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
Thank you for stopping by. Without you guys, we will not be able to attract our gurus attention to this problem. By the way, Blackstone Wifi has the same GUID as shown above. My ROM is one of the EnergyRom 3.0 , radio version 1.14.25.24.
Just let me know what to do and I will start testing. Also I have working Blackstone around from which we can extract working EEPROm. Just give me tools and instructions.

I remember that I issued this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512

tabi13 said:
Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?
Click to expand...
Click to collapse
I remember issuing this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
I find it very interesting that the Trinity has the EXACT same registry entry. Also, the exact same WLAN Radio. So, is there a different WLAN Radio that is having the same issue (I don't remember the Hermes one), or is it solely the TNETW12511 that has the issue? Would be nice to help narrow it down a bit.
Could it be that by using these dumped ROMs that we are inadvertantly flashing code for a different WLAN Radio that is corrupting our eeproms? Maybe there is a small part of code hidden within the DUMPS that still remains? Just some thoughts... This problem seems to be happening more and more since WM6.5?
But I also realize it may be happening more and more because more people are flashing now than ever!

I have same situation with WiFi on my HD.
I would like to say something, which could be useful for gurus.
Sometimes my phone catching WiFi after a few soft resets. 3-4 times and I could connect to WiFi network.