Related
Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
Hi guys I'm having a hard time connecting to the internet on my htc fuze. I just bought a brand new htc fuze off ebay and successfully unlocked it. Ive tried manually putting in the Rogers settings but it doesn't really work that well. Has anybody got their fuze to work on the Rogers network?
Any help would be much appreciated
PS: Wifi works flawless with internet explorer and Opera.
Here's the latest settings for Rogers. Works on WM 6.1.
GPRS:
Profile Name: RogersInternet
Connects to: The Internet
Access Point: internet.com
Everything else Default/Blank/None
Profile Name: RogersMedia
Connects to: Work
Access Point: media.com
User name: wapuser1
Password: wap
Authentication Type: PAP
Everything else Default/Blank
Proxy:
Profile Name: HTTP
Connects from: The Internet
Connects to: WAP Network
Proxy: 10.128.1.69:80
Type: HTTP
Everything else Default/Blank
Profile Name: Socks4
Connects from: The Internet
Connects to: WAP Network
Proxy: 10.128.1.69:1080
Type: Socks4
Everything else Default/Blank
Multimedia Msg. Options
Sending Options
Priority: Normal
Validity Period: Maximum
Delivery Time: Immediatly
Creation Mode: Free
Size: 295 KB
Request Delivery/Read Report: Unchecked
Receiving Options
Download Mode: Automatic
Reject Unknown Sender: Unchecked
The rest are all checked
Multimedia Msg. Profiles
Profile Name: RogersMedia
MMSC URL: http://mms.gprs.rogers.com
Proxy: Checked
Address: 10.128.1.69
Port: 80
GPRS: RogersMedia
After doing the first one, my internet/e-mail/weather/etc all work fine.
There's also a CAB file that was created by Lurch3559.
Original Thread. http://forum.xda-developers.com/showthread.php?t=311426
I haven;t done it on the Fuze (yet - its in the mail!)
But on the Elf/Touch that I;m currently using just doing the internet.com settings was enough to get me going.
One thing though... is the one you bought actually the "HTC Fuze" (RAPH110) or was it a "Touch Pro" (RAPH100)?
The RAPH100 is the euro model and uses different frequencies for its UMTS antenna, which basically means you wouldn't be able to do 3G/HSDPA
mgwatson said:
I haven;t done it on the Fuze (yet - its in the mail!)
But on the Elf/Touch that I;m currently using just doing the internet.com settings was enough to get me going.
One thing though... is the one you bought actually the "HTC Fuze" (RAPH110) or was it a "Touch Pro" (RAPH100)?
The RAPH100 is the euro model and uses different frequencies for its UMTS antenna, which basically means you wouldn't be able to do 3G/HSDPA
Click to expand...
Click to collapse
Not sure if you're asking me or the OP, but I grabbed the actual Fuze that AT&T carries. Got in unlocked and the 3G feels faster than my iPhone. This could just be the placebo effect mind you. lol
Thanks for the replied guys I'll let you know how I get on.
My girlfriend also has an htc fuze but she flashed it the Romeos rom and everything works flawlessly. Maybe that's the way to go.
2nsane2005 said:
My girlfriend also has an htc fuze but she flashed it the Romeos rom and everything works flawlessly. Maybe that's the way to go.
Click to expand...
Click to collapse
Plus the new .20M1 radio, and you're set!
Summary:
Some providers make use of a different APNs for MMS and data. In such cases, leaving the APN type as "" will cause MMS not to work (see History for explanation). To fix this, we have to ensure the following:
Data APN Types are set to "default", or "default,supl" (if you're having issues with AGPS, use the supl one)
MMS APN Types are set to "mms"
In other words, APN types should not be left blank for any APN. Hope it helps. For a detailed description read below.
History:
Hi all,
I previously had MMS working perfect after following this instructions: http://www.systemscrafter.com/imho/archives/6, but since I switched to CyanogenMod BETA 3 MMS hasn't been working for me.
After some testing, I've found out the following. It seems that under APN Type, the one you use for data MUST be designated as "default", and for the MMS one, as "mms". Lower-case. The apns-conf.xml left out the "default".
Secondly, after doing that, it still did not work reliably. This was solved by removing one of the data APNs. In Cyan's apns-conf.xml, there were "Gee! (GPRS)" and "StarHub Internet". These 2 are essentially the same APN point (one uses proxy, one does not), configuration wise, just given different names. I removed "Gee! (GPRS)" and entered "default" under "StarHub Internet", and MMS is now working perfect.
Update: xiutian had a simpler fix. Simply go to "Gee! (GPRS)" and "StarHub Internet", make sure both of them are set to APN type "default". It works, just tested. In other words, never leave the "APN type" blank. It has to be either "default" or "mms". (Any other values? not too sure...)
Update #2: cyanogen has kindly informed me that setting it to "default" may cause AGPS to stop working. After doing some searching, I found this: http://www.nexusoneforum.net/forum/...how-can-i-get-internet-work-my-nexus-one.html. Apparently, setting it to "" makes Android use it for everything, which explains why MMS was not working for some of us. To fix the AGPS part, instead of using "default", we now use "default,supl".
Update #3: @bcpk on Twitter has kindly pointed me to the following article: http://wccftech.com/2010/09/09/solving-gps-nofix-problem-cyanogenmod-6-nexus/ Do check it out if you're having issues with CM6.
Hope it helps some of you.
Wysie said:
Summary:
Some providers make use of a different APNs for MMS and data. In such cases, leaving the APN type as "" will cause MMS not to work (see History for explanation). To fix this, we have to ensure the following:
Data APN Types are set to "default", or "default,supl" (if you're having issues with AGPS, use the supl one)
MMS APN Types are set to "mms"
In other words, APN types should not be left blank for any APN. Hope it helps. For a detailed description read below.
History:
Hi all,
I previously had MMS working perfect after following this instructions: http://www.systemscrafter.com/imho/archives/6, but since I switched to CyanogenMod BETA 3 MMS hasn't been working for me.
After some testing, I've found out the following. It seems that under APN Type, the one you use for data MUST be designated as "default", and for the MMS one, as "mms". Lower-case. The apns-conf.xml left out the "default".
Secondly, after doing that, it still did not work reliably. This was solved by removing one of the data APNs. In Cyan's apns-conf.xml, there were "Gee! (GPRS)" and "StarHub Internet". These 2 are essentially the same APN point (one uses proxy, one does not), configuration wise, just given different names. I removed "Gee! (GPRS)" and entered "default" under "StarHub Internet", and MMS is now working perfect.
Update: xiutian had a simpler fix. Simply go to "Gee! (GPRS)" and "StarHub Internet", make sure both of them are set to APN type "default". It works, just tested. In other words, never leave the "APN type" blank. It has to be either "default" or "mms". (Any other values? not too sure...)
Update #2: cyanogen has kindly informed me that setting it to "default" may cause AGPS to stop working. After doing some searching, I found this: http://www.nexusoneforum.net/forum/...how-can-i-get-internet-work-my-nexus-one.html. Apparently, setting it to "" makes Android use it for everything, which explains why MMS was not working for some of us. To fix the AGPS part, instead of using "default", we now use "default,supl".
Hope it helps some of you.
Click to expand...
Click to collapse
I'm sorry to say that it did not help me.
I'm on Orange in Switzerland.
I had to input the apn myself and don't see where i can make it default or not.
Could you please provide me with a little more info?
Thanks
I went thru the APN list and made the necessary corrections. Will include in beta4.
The file is here if you have anything to add:
http://github.com/cyanogen/android_vendor_cyanogen/blob/eclair/prebuilt/etc/apns-conf.xml
Awsome
For Orange CH I've found 2 things that work for me,
1) apn internet
mcc 228
mnc 03
2) apn wap
proxi 192.168.010.002
port 8080
mcc 228
mnc 03
Both these settings work to get data, but I still havent managed to find the correct mms settings, and the shop not only wants me to leave them the phone for an hour or 2 (i wonder why) but then they want me to pay them extra for the mms info..BS
I've been searching on the web but all the settings I've found and tried are not working.
samawil said:
I'm sorry to say that it did not help me.
I'm on Orange in Switzerland.
I had to input the apn myself and don't see where i can make it default or not.
Could you please provide me with a little more info?
Thanks
Click to expand...
Click to collapse
When entering your APN, scroll to the bottom, there's a option "APN type", tap on that and type in "default". To be honest I don't know why Google can't make it a ListBox where we can choose from...
Wysie said:
When entering your APN, scroll to the bottom, there's a option "APN type", tap on that and type in "default". To be honest I don't know why Google can't make it a ListBox where we can choose from...
Click to expand...
Click to collapse
ahhh thanks,
I always thought apn type had something to do with the operator and therefor never even tapped on in.
I'll keep trying then with some of the settings I've found online, set the internet one to default, and see what happens, as soon as I can
Lou
I'm on Centennial Wireless. I had the internet working since day 1. But this didn't help with the mms. It does seem 2 almost connect now that I put mms in type, but still no go.
success
yeaaayyy i finally got it.
Orange switzerland has 2 sets of settings, one for data and one for mms.
I had the correct information for both, but my mistake was in the apn type field.
So I went ahead and made the main data on default,supl and the other mms et voila...thanks...that link helped
L
esincho: More info would be good. You put "mms" in type for your MMS APN, right? What about your Data APN? What did you put in type for that?
Seems that the new Nexus One update has an updated apns-conf.xml.
Some of the settings have changed, particularly StarHub.
Code:
<apn carrier="StarHub"
mcc="525"
mnc="05"
apn="internet"
type="default,supl"
/>
<apn carrier="Gee! MMS"
mcc="525"
mnc="05"
apn="shmms"
mmsc="http://mms.starhubgee.com.sg:8002"
mmsproxy="10.12.1.80"
mmsport="80"
type="mms"
/>
I've also uploaded it here: http://www.androidspin.com/downloads.php?dir=wysie/MISC/&file=apns-conf.xml
Wysie said:
esincho: More info would be good. You put "mms" in type for your MMS APN, right? What about your Data APN? What did you put in type for that?
Click to expand...
Click to collapse
sorry bro U right. I'm not new 2 having 2 put in these settings, cause I am on Centennial and I buy all my phones unlocked cause Centennial phones suck. My internet works fine, 4 it under type I put default,supl cause I read somewhere this is what 2 put. Like I say, I have all the right mms info from the carrier cause I'm use 2 putting it in. I shows like it's connecting, but it don't maintain connection.
I just received a mms and was able 2 open it, but I still can't send any.
Wysie said:
...To fix the AGPS part, instead of using "default", we now use "default,supl".
Hope it helps some of you.
Click to expand...
Click to collapse
Uff, thanx this helped me. Now I can use MMS on Orange Austria.
how can i verify AGPS is working?
htc magic next to my n1 seems to show more accurate position, and we're in door so it couldn't be pure gps
I can't seem to have MMS working on my N1. I am in Honduras and the settings seems to be pretty str8forward but my MMS are not going out.
I've set up the 2 apn and tried both the "default" and "defaul,supl" setting but nothing. The message is never sent out. I seems like the application is calling the APN but then it stops. I can see that for a second the icon of the Edge connection disappears when trying to send the MMS.
How would you configure your apn with the following settings :
nombre de la configuracion: MMS Claro
Pagina de inicio: 10.6.32.27/servlets/mms
Punto de Acceso o (apn): mms.megatel.hn
Dirreccion IP: 010.006.032.002
Usuario: mmsmegatel
Contraseña: mmsmegatel
P_
I'm on AT&T right now,
i use APNdroid to disable Data, but i still want to be able to use MMS, so i set APNdroid to still allow MMS, and i made anothe APN with the necessary info and as APN type MSS
but it doesn't seem to work, any input?
after some fiddling with it i fixed it myself
i took the default APN added MMS as APN type
and told APNdroid to ALLOW 3g data (so practically not use apndroid)
and NO MMS Port as seen at some other places, MMS port is <not set>
For those who wanna see entire settings for JUST MMS (not data)
Name: AT&T MMS
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication Type: <not set>
APN Type: mms
using APNdroid to disable Data and keeping MMS doesn't work, just set the APN type to MMS and you're good..
if you want to use both MMS and Data just keep the APN type field <not set>
DATA/MMS
Thanks to wysie i was able to get data on internet2.voicestream with apn type default,supl and mms on epc.tmobile.... would anyone else know how to set up the apn for other apps like t-mobile my account that uses epc.tmobile.... what apn type would that be so android knows to switch it to that apn to access info?
Telia (Denmark)
MMS not working for me ?
AF9210: From what I know there's only <blank>, default, supl and mms .
MarkM83: More info?
Thank you soo much Wysie. you have no idea how long i've been searching for a solution to my mms/data issue on my Hero and then Nexus after it. I owe you a couple o beers
Running Miri_WM65_21889_Premium_Manila_2.5_V18.0
On O2 PAYG
I have received picture MMS, I can view the text message ok, but not the picture.
Keeps asking to download picture, then obtain a failure message.
All settings appear to be ok, have checked that MMS settings are in place.
Is there anything else to check or need to change?
Isambard said:
Running Miri_WM65_21889_Premium_Manila_2.5_V18.0
On O2 PAYG
I have received picture MMS, I can view the text message ok, but not the picture.
Keeps asking to download picture, then obtain a failure message.
All settings appear to be ok, have checked that MMS settings are in place.
Is there anything else to check or need to change?
Click to expand...
Click to collapse
Just ensure you have data connections active. Sometimes people have them switched off using apps like nodata etc so data cannot connect.
Data is def. on.
I have tried a Virgin SIM, that functions correctly.
The O2 SIM functions correctly in another phone.
I believe that the PAYG settings are different to pay monthly.
I contacted O2, they cannot supply the correct settings.
Have you tried the payandgo setting ?
O2 MMS settings
The o2 MMS settings can be sent direct to your mobile. Go to www.o2.co.uk/services/ota4/select. Alternatively, the settings are:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
Port number: 8080 or 9201
URL address: http://mmsc.mms.o2.co.uk:8002
r
Andrew
Have tried receiving the settings from O2, this is the result.
Unfortunately, we are not able to process your settings request at this time. Please contact Customer Service or your account manager to discuss further options.
The settings that you supplied are similar to what I have for MMS.
In the HD it is shown as O2 active and under the connect via: there are several options....O2 active...mobile web...Proxy internet...My work network...My ISP....Work
By trial and error I downloaded all the pics by connecting to My work network
P.S. settings are in post#17 http://forum.xda-developers.com/showthread.php?t=590753&page=2
It is very confusing, why can't O2 just send or configure the correct settings as do Virgin.
Also all the pics are very small, I believe this is another O2 error, as once again the HD is not recognised, a known issue.
A registry hack is required.??
Don't know if this thread can help
http://forum.xda-developers.com/showthread.php?t=612125&highlight=mms+small
r
Andrew
I am using new Darkstorm v2 that are published today.
I have seen something new...
I can not use 3G if there are available WiFi network, even WiFi is closed.
I wold like to know how to disable it and use 3G when I want, not the device decide, as it was until this ROM.
Thanks In Advance!
TheAgent1982 said:
I am using new Darkstorm v2 that are published today.
I have seen something new...
I can not use 3G if there are available WiFi network, even WiFi is closed.
I wold like to know how to disable it and use 3G when I want, not the device decide, as it was until this ROM.
Thanks In Advance!
Click to expand...
Click to collapse
Firstly, what I suggest is go to setting> WIRELESS&NETWORKS > MOBILE NETWORKS > then, check whether the DATA ENABLED already tick or not(if not,just tick it)...
Second,in case the first step not working even after you ticked it...then now you go back to the MOBILE NETWORKS again...choose ACCESS POINT NAMES...and then make sure you choose the correct access point(which must be the same name with the one when you using WINMO)...
Hope these help...Cheers...
sylau90 said:
Firstly, what I suggest is go to setting> WIRELESS&NETWORKS > MOBILE NETWORKS > then, check whether the DATA ENABLED already tick or not(if not,just tick it)...
Second,in case the first step not working even after you ticked it...then now you go back to the MOBILE NETWORKS again...choose ACCESS POINT NAMES...and then make sure you choose the correct access point(which must be the same name with the one when you using WINMO)...
Hope these help...Cheers...
Click to expand...
Click to collapse
Ok, thanks, but what is the connection to WiFi, and why it makes the problems?
Any Idea?
TheAgent1982 said:
Ok, thanks, but what is the connection to WiFi, and why it makes the problems?
Any Idea?
Click to expand...
Click to collapse
does it works?erm..basically sometimes the 3G data is disabled in default setting or sometimes it'll just choose an access point randomly...so,I think this is why these situations occur...
Cheers,you are welcome...haha,learning when teaching...
when i tick on "mobile network", i get "Use phone for data connection when WiFi is Unavailable" .
I do i change it to operate 3G when i want?
TheAgent1982 said:
when i tick on "mobile network", i get "Use phone for data connection when WiFi is Unavailable" .
I do i change it to operate 3G when i want?
Click to expand...
Click to collapse
Yea..thats correct,when you are not connecting to WIFI, you can browse the internet using 3G...Furthermore you can long press your home&add widget,then choose power control...put it on any screen you want...then trough that widget you can control your 3G and WIFI anytime...you can on/off the 3G when you want use or save battery...
Android is roaming while it should not.....
Maybe it helps.... I discovered that when I'm running with Android the 3G isn't working because the phones "thinks" that it is roaming( I checked the box, no connection when roaming). In reallity it isn't roaming and I also do not understand why this it is happening. In any case when I unchecked the box immidiatly after the 3G connection was on. Actually I was now looking on the xda if somebody had the same experience.
Addition:
The WiFi is OFF even Unavailable network, and i get this problem, and can not use 3G, at the same reason that i have mentioned before.
There is a code that i have to change?
I will try the roaming method...
More information
I have see, that i do not see APN list in Darkfroyo, and i believe thats why i can not connect to 3G.
So, how can i fix that?
TheAgent1982 said:
I have see, that i do not see APN list in Darkfroyo, and i believe thats why i can not connect to 3G.
So, how can i fix that?
Click to expand...
Click to collapse
Hello.
I have same problem...
fellixdesuza said:
Hello.
I have same problem...
Click to expand...
Click to collapse
Any idea?
up
-------------------------------------
if you are on us tmobile network use these settings in APN :
Name: T-Mobile US
APN: epc.tmobile.com
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Auth Type: <not set>
APN Type: default,supl,mms
this solved my 3g problem
phoenixrise said:
if you are on us tmobile network use these settings in APN :
Name: T-Mobile US
APN: epc.tmobile.com
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Auth Type: <not set>
APN Type: default,supl,mms
this solved my 3g problem
Click to expand...
Click to collapse
OK, but how can i add that information?
When i go to APN page, i get black page and can not add ANY information.
Am i missing something ?
Thanks!
EDIT:
I have managed to fix it!
1.I have run a ROM that the 3G works.
2. I have copied the right information from APN, from the working one, menu details.
3. I have run the desired ROM, Darkstone for example.
4. I have added NEW APN information, at APN page with the information i have got.
5. WALLA! now 3G is working!
Thanks you all!!
I also change my Froyo ROM to shubCRAFT 1.5★CM6 Final and APNs still is empty. Can you tell me please wich ROM you installed.
I've not had that specific 3G problem. When I start up Android, there is a "New SIM Insterted" message which when I launch it comes up with an Error Report and have to Force Close the program. After doing that I find 3G works fine.
Also I am unable to go to Wireless & Networks and choose Access Point Names as said Error Message/Force Close appears. But doesn't seem to cause any problems generally. As for Wi-Fi, I have the opposite, if Roaming is enabled then the Wi-Fi will refuse to turn on
fellixdesuza said:
I also change my Froyo ROM to shubCRAFT 1.5★CM6 Final and APNs still is empty. Can you tell me please wich ROM you installed.
Click to expand...
Click to collapse
Yes, at the APN, you will see black screen, without ANY configuration.
So, select the menu "windows button" and press "new APN" then' it will give you a place to insert information that you have copied from a working one...
Hope it helps...
TheAgent1982 said:
Yes, at the APN, you will see black screen, without ANY configuration.
So, select the menu "windows button" and press "new APN" then' it will give you a place to insert information that you have copied from a working one...
Hope it helps...
Click to expand...
Click to collapse
I configured 3G and it is working now... I'm happy Thank you!