Related
Here is official htc one developer edition 4.3 rom.zip link and soon ruu will be posted too
http://www.htcdev.com/devcenter/downloads
Sent from my HTC One using Tapatalk 4
The download for the zip is now there.
How is the zip flashed - is stock recovery required ?
I currently have a S-OFF device with 11111111 CID. Will this flash ok or will I also need to the change product id ?
Probably need to change MID but why do you want to run a US-based ROM? I'd just wait for the EU build personally
Having said that, you just flash it in fastboot after 'fastboot oem rebootRUU'
EddyOS said:
Probably need to change MID but why do you want to run a US-based ROM? I'd just wait for the EU build personally
Click to expand...
Click to collapse
It seeems Europe will get 4.3 later (late october/novembeer), with Sense 5.5 : https://twitter.com/LlabTooFeR/status/382606148664561664
saquib said:
The download for the zip is now there.
How is the zip flashed - is stock recovery required ?
I currently have a S-OFF device with 11111111 CID. Will this flash ok or will I also need to the change product id ?
Click to expand...
Click to collapse
if you dont have developer edition one there is no point of having this zip. i would advice to install INSERTCOIN or ARHD which are now based on this update. you can keep everything stock on insertcoin so it will save you alot of hassel plus you can add addition tweaks you like
and when update hits your region you can get ota by running your region ruu
Please use this thread --> http://forum.xda-developers.com/showthread.php?t=2355992
Different firmware parts will be available here upon possibility.
Recoveries:
Here are stock recoveries if you want to revert to your carrier's stock recovery after restoring e.g. a backup of your stock rom from TWRP, and want to restore the recovery too to stock so you can receive OTAs for your original CarrierID (CID) found in the bootloader.
DISCLAIMER: by downloading and using these you take all responsibilities as your own, any damage done through the process to your device is your sole responsibility.
To flash them, go to Download mode (power off phone, long press Vol Down + Power), then use HTC Sync's fastboot.exe utility, typing (substitute xy with the naming postfix of the recovery you downloaded):
Code:
fastboot flash recovery recovery_verified.img__<xy>
Asia WWE
recovery_verified.img__Asia_WWE_1.08.707.4 9.5 MB https://mega.nz/#!vhQwiRDY!z8q9KGnfjVf8EtBmf4q5PqeKEbsnowbWBKSQ6_6I2AE
MD5: 1e86b71a66c232d7631a44f7296d6878 *recovery_verified.img__Asia_WWE_1.08.707.4
Taiwan
recovery_verified.img__TW_1.08.709.4 9.5 MB https://mega.nz/#!mlhhAahb!YUet7nVBdKD488XMLbkZAKwBhu-u_FT9ko1lKa3cSuc
MD5: d93fb2a3843ad97469db5c87b21d68e8 *recovery_verified.img__TW_1.08.709.4
HTCCN_CHS_2 Chinese
recovery_verified.img__CHS_1.08.1405.5 9.5 MB https://mega.nz/#!mo4XyIiC!S8AISPX2lKCiB-0iGaAQnKF_5IyQbqwbAyTSEx2ERtc
MD5: 88d3ca5d57a6bc90dd2746cba6ce5079 *recovery_verified.img__CHS_1.08.1405.5
HTCCCN_CHS_CMCC
recovery_verified.img__HTCCN_CHS_CMCC_1.14.1403.2 9.5 MB https://mega.nz/#!PgAxHZLQ!5GlCyU27j0_pkZYHdzcZR6g5lpudACqR83UimH7zSmo
MD5: 7b461bebecbdb5582d122ea2ab152dbb *recovery_verified.img__HTCCN_CHS_CMCC_1.14.1403.2
Europe 1.61.401.6
recovery_verified.img__Europe_1.61.401.6 9.5 MB
https://mega.nz/#!vw4CTKTC!Z9K9kmI4riMQReaOEcwbX4BajFF-_8OZaRuzVu5MyQk
md5sum: 9ff3434832beb89150acd036807c6756 *recovery_verified.img__Europe_1.61.401.6
Asia-WWE 1.61.707.4 too:
recovery_verified.img__Asia_WWE_1.61.707.4 9.5 MB
https://mega.nz/#!2goggSBa!oxdhJJ3CMemghjPPqwb7o3BY5MMkDHRm1yNjJgaDjHg
md5sum: 3d6ca95aa002d59927d881f1f963f5aa *recovery_verified.img__Asia_WWE_1.61.707.4
If this thread helped you, don't forget to hit the Thanks button!
Reserved for later use when more firmware available.
M9+ From USA
Guys,
I just received a HTC M9+ from USA anda i have another one from china. I want to get the rom from the US Version and put it in the Chinese version, but to do that i need some help about how to do that. could one help me? off course i will share the original rom from the US version.
Thanks.
I bought one from UAE. I can't find stock recovery for 1.61.401.6
can anyone upload stock recovery for this version?
jura.m said:
I bought one from UAE. I can't find stock recovery for 1.61.401.6
can anyone upload stock recovery for this version?
Click to expand...
Click to collapse
Here you go:
Europe 1.61.401.6
recovery_verified.img__Europe_1.61.401.6 9.5 MB
https://mega.nz/#!vw4CTKTC!Z9K9kmI4riMQReaOEcwbX4BajFF-_8OZaRuzVu5MyQk
md5sum: 9ff3434832beb89150acd036807c6756 *recovery_verified.img__Europe_1.61.401.6
And here's Asia-WWE 1.61.707.4 too:
recovery_verified.img__Asia_WWE_1.61.707.4 9.5 MB
https://mega.nz/#!2goggSBa!oxdhJJ3CMemghjPPqwb7o3BY5MMkDHRm1yNjJgaDjHg
md5sum: 3d6ca95aa002d59927d881f1f963f5aa *recovery_verified.img__Asia_WWE_1.61.707.4
have taiwan's 1.61.707.4 9.5 ?
i still can not find
jura.m said:
I bought one from UAE. I can't find stock recovery for 1.61.401.6
can anyone upload stock recovery for this version?
Click to expand...
Click to collapse
tbalden said:
Here you go:
Europe 1.61.401.6
recovery_verified.img__Europe_1.61.401.6 9.5 MB
https://mega.nz/#!vw4CTKTC!Z9K9kmI4riMQReaOEcwbX4BajFF-_8OZaRuzVu5MyQk
md5sum: 9ff3434832beb89150acd036807c6756 *recovery_verified.img__Europe_1.61.401.6
Click to expand...
Click to collapse
I got my M9+ in the UAE as well and the latest/current software version is 1.61.401.7. I guess the recovery is still the same with 1.61.401.6?
SSS Desire said:
I got my M9+ in the UAE as well and the latest/current software version is 1.61.401.7. I guess the recovery is still the same with 1.61.401.6?
Click to expand...
Click to collapse
I can't tell you unfortunately. And also it's a shame you can't boot up recoveries anymore without flashing them...
in normal old hboot, you could simply fastboot boot recovery.img, now in M9 and M9+ ABoot, you just can't do that anymore, you have to flash it to boot it And thus you can't backup original recoveries...
(I'm really annoyed by this, it also means i cannot warmboot a kernel either without flashing it, which is a burden for unstable kernel development. But that's it, nothing to do about it)
Probably it could be just as good as 1.61.401.7, but it's not easy to tell without actually trying it.
jeff30626 said:
have taiwan's 1.61.707.4 9.5 ?
i still can not find
Click to expand...
Click to collapse
Taiwan
1.61.709.3
recovery_verified.img__TW_1.61.709.3 9,711 KB
https://drive.google.com/open?id=0B3hc3jLpl2YxZWkxMG9RSkNVNWc
md5sum: 1c56122c8fe65f8660956c60923dca34 *recovery_verified.img__TW_1.61.709.3
1.81.709.2
recovery_verified.img__TW_1.81.709.2 9,711 KB
https://drive.google.com/open?id=0B3hc3jLpl2YxQXZ6UWhwNXl6U1U
md5sum: 14ae20f231dbd78420efae332a3f8a2f *recovery_verified.img__TW_1.81.709.2
Taiwanese number is 709,not 707.
Did you really want taiwan's 709? You must confirm it firstly.
Keep in mind you would not apply OTA if you flash "custom" recovery in this M9+ forum.
You could follow tbalden's CleanSlate ROM for the new update and apply firmware manually.
Hope when M9+ will be available in EU/USA in the recent,there will be more resources(RUU,S-OFF,Custom Recovery,System Image Backup...) for us.
tbalden said:
...
All I can help with is to promise i'll update the CleanSlate when I get my hands on a system image with the new base and get some free time to mess with it...
Click to expand...
Click to collapse
1.85.401.5 Recovery
This is the recovery from the 1.85.401.5 OTA:
https://www.dropbox.com/s/4wgcd7md4i3zogy/recovery_verified_Europe_1.85.401.5.img?dl=0
With my s-off, i've just converted to main version 1.08 Europe region 401, all went fine. Now updating to 1.61, then hopefully to 1.85 Then i'll dump system image and look at creating an update for CleanSlate ROM
Do i need to relock my bootloader to flash the stock recovery ??
dhruvzz said:
Do i need to relock my bootloader to flash the stock recovery ??
Click to expand...
Click to collapse
No,if you only want to flash the stock recovery.
I tried flashing it on the unlocked bootloader but it doesnt work...my phone went into bootloop so i had to flash twrp again
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
I flashed the stock recovery and then tried updating my phone to an ofiician update it didnt work
dhruvzz said:
I tried flashing it on the unlocked bootloader but it doesnt work...my phone went into bootloop so i had to flash twrp again
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
I flashed the stock recovery and then tried updating my phone to an ofiician update it didnt work
Click to expand...
Click to collapse
You need a backup of a stock system and boot image restored too, without modification and backed up in system read only mode of twrp. Otherwise it will fail. Also you need the exact version of stock recovery where your backup was made.
So far it seems the best way is to have ruu signed zips with the same main version as your firmware. There's no guide here on m9+ how to modify main version of phone to be able to flash earlier full ruu zips, but at the moment we only have 1.08 ruu zips at hand, so if anyone upgraded over that is kind of stuck with read-only mode system backups if we don't know how to modify main version.
Hopefully someone can put together a guide fur that.
Tho I'm not sure, if you're s-off and super cid, it might even allow to downgrade main version automatically while flashing the old ruu, right? If so, backing up sdcard to PC and flash ruu zip then update through ota is a good option.
It needs a lot of fuss to do these things, that's why I cook the CleanSlate ROM when updates roll out and I can create them too, so people just don't have to care too much about it, flash the rom zip right away, no sdcard backup business, no s-off needed.
We're lucky because the Radio firmware is inside the ROM too, so when they update that it will be there in custom ROMs too. Also it seems that they rarely change other firmware partitions so far...
can someody pls upload stock recovery for Asia-WWE 1.62.707.4.i restored my phone to it.and now i only stock recovery for Asia-WWE 1.61.707.4
Which stock recovery?
How do I know which stock recovery I need?
CID HTC__621
OS-1.09.7082
can someone provide with the latest indian recovery pls
Nvm
@tbalden,
Do you have stock recovery for 1.62.707.4 and 1.88.707.4 for backup before I update the latest OTA.
Thanks.
Probably the among the last to be updated. Singapore finally received Android 5.1 update this week. New version is 2.11.708.27.
Cid 044.
Mike Lim said:
Probably the among the last to be updated. Singapore finally received Android 5.1 update this week. New version is 2.11.708.27.
Cid 044.
Click to expand...
Click to collapse
You could have posted the OTA and make this thread less useless.
Let you know one thing. You are not last. Still on 1.40 in Hong Kong.
Can't believe it.
O2 uk and wwe still on older version too.
I wish I stole my HTC M9.
ratratrat said:
Let you know one thing. You are not last. Still on 1.40 in Hong Kong.
Can't believe it.
Click to expand...
Click to collapse
My M9 also have CID HTC_622, Hong Kong. I stil on 1.40 too... Why this year HTC so long to update the firmware?
donmarkoni said:
You could have posted the OTA and make this thread less useless.
Click to expand...
Click to collapse
That's what was in Singapore
pleas download frimware 2.11.708
donmarkoni said:
You could have posted the OTA and make this thread less useless.
Click to expand...
Click to collapse
Was unable to find and backup OTA file to SD card.
Anyone in UK using an Unbranded M9 got this yet?
CID HTC_622, Hong Kong. Stil on 1.40... When the company update firmware to 2.11.708.27?
Allow me to do the honor.
2.11.708.27 Singapore/HK Version CID: HTC__044/HTC__622 (OTA)
As for HTC__622 (HK CID) @m-media updated by adbsideload.
just received 2.11.617.15 (510.13 MB) At&t M9 converted to developer edition. S-Off, Unlocked B, and Rooted,,,,,On stock,,,,,,Should I install? It downloaded and wants too...hehehe
LuckyColdJohnson said:
just received 2.11.617.15 (510.13 MB) At&t M9 converted to developer edition. S-Off, Unlocked B, and Rooted,,,,,On stock,,,,,,Should I install? It downloaded and wants too...hehehe
Click to expand...
Click to collapse
Not if you have rooted, may not end well!
LuckyColdJohnson said:
just received 2.11.617.15 (510.13 MB) At&t M9 converted to developer edition. S-Off, Unlocked B, and Rooted,,,,,On stock,,,,,,Should I install? It downloaded and wants too...hehehe
Click to expand...
Click to collapse
you need to return to stock to install the OTA. use the system.img and stock recovery that match your current version here I have here > https://www.androidfilehost.com/?w=files&flid=28823
How do I restore stock system so that I can accept an OTA?
Copy the system.emmc.win from your TWRP backup folder to the folder containing fastboot on your PC (or any folder, if fastboot is in your PATH). Make sure your Android SDK platform-tools are up to date!!
Reboot the device into Download mode (adb reboot download) and connect to PC.
Fastboot flash the backup file* (fastboot flash system system.emmc.win).
Fastboot flash stock recovery (fastboot flash recovery recovery_signed.img)
Reboot to system, install OTA.
Click to expand...
Click to collapse
Thanks guys!!!! LOve the help here......Good looking out
please how to install this ota(2.11.708.27 cid044) to cid 622
New RUU FOR Developer Ed/Att 2.11 Direct Link
http://www.htc.com/us/support/htc-one-m9/news/
abbas_392003 said:
please how to install this ota(2.11.708.27 cid044) to cid 622
Click to expand...
Click to collapse
You can flash the OTA by adb sideload, I am having a CID_622 M9 and the zip works!!
(The OTA seems applicable for CID_044 and CID_622, which shared the same region code for this year)
Thanks @xunus for the zip!!!:good:
xunus said:
Allow me to do the honor.
2.11.708.27 Singapore/HK Version CID: HTC__044/HTC__622 (OTA)
As for HTC__622 (HK CID) @m-media updated by adbsideload.
Click to expand...
Click to collapse
hi my device is himauhl and cid HTC__622 but for me this error:
E:unknown command [set_err_msg]
this package is for "htc_himauhl" devices;this is a "htc_himaul".
E:Error executing updater binary in zip `/sideload/pckage.zip`
please help me.....thank
abbas_392003 said:
hi my device is himauhl and cid HTC__622 but for me this error:
E:unknown command [set_err_msg]
this package is for "htc_himauhl" devices;this is a "htc_himaul".
E:Error executing updater binary in zip `/sideload/pckage.zip`
please help me.....thank
Click to expand...
Click to collapse
My M9 from Hong Kong (HTC_622) and the establishment of the OTA provides as an error. I think it does not fit our CID... I think it is necessary to wait for the official update, but the wait is tired... I think we have forgotten
NPNS Or NPN? What are the differences of being versions of the Firmware? I currently have an XT1687 US Version With the NPNS version (I installed it) but I do not know if something changes in those firmware versions
JassyelZ said:
NPNS Or NPN? What are the differences of being versions of the Firmware? I currently have an XT1687 US Version With the NPNS version (I installed it) but I do not know if something changes in those firmware versions
Click to expand...
Click to collapse
In general, all Moto's are like this:
XXX - Original factory flash or initial release
XXXS - OTA Update
The firmware itself is identical.
acejavelin said:
In general, all Moto's are like this:
XXX - Original factory flash or initial release
XXXS - OTA Update
The firmware itself is identical.
Click to expand...
Click to collapse
Thanks youuu!!!
acejavelin said:
In general, all Moto's are like this:
XXX - Original factory flash or initial release
XXXS - OTA Update
The firmware itself is identical.
Click to expand...
Click to collapse
I know this thread is a bit dated but I just searched and found it, as I was curious what the difference in the file names where. Mine is a g5s plus, but it would still pertain to my curiosity. The file I'm looking at are nps and npss.
Thankyou for your simplistic and straight forward answer acejavelin. It clears things up good.
I didn't want to download an india version of the rom, so this helped me a lot, ty ty!
Hi there,
I want to share the available RadioModems and baseband collection with you.
All credits to @crisps
-----------------------------------------------------------------
For all lazy readers that just want to get a good baseband:
After several tests from my side and verifying with other users here is my SUUGESTED BASEBAND for all Roms:
Radio Modem Full Version 4.0.247ST:
https://mega.nz/#!BYRiwYyA!1KU2-2Ovq2yB9RvaXCv95EFt_2aGNaziQ8Qka7R0ab4
You may use others as well. This is the most stable yet with less compatibility problems. Feel free to take another version. It is a suggestion only.
-----------------------------------------------------------------
I will update this thread when receiving new RadioModems/basebands.
Take care, all are to be used at your own risk, neither me or @crisps will be responsible for any damage.
I tested all without any problems.
NEW ADDED FILE HOST for all files: https://www.androidfilehost.com/?w=files&flid=243936
Radio Modem full version 1.9.104:
[offline for further investigation]
Radio Modem full version 2.3.044:
https://mega.nz/#!FBIFiADK!LF7bSKdJzT8ZtwyTBMQEr5MY13OWyvg7a9dVinb0Ekk
RadioModem full version 2.5.435: https://mega.nz/#!8Z5SXYqL!ZRTeg_HuAWHvuIIxSVvIcwIgAO7CRMXPDeteeWMRy6g
Radio Modem Full Version 2.5.462: https://mega.nz/#!FUZGmJKR!paZBjuIhmVSm8W8elCySSUYByWvsmnViVpjs1afSjMQ
RadioModem incremental update 2.5.462 to 3.1.185: https://mega.nz/#!wNwiBT5R!SyE5LkVu6dH9YE0brrWKa4455wEy1uxz6G8Isod2HYU
RadioModem incremental update 2.5.462 to 3.1.187: https://mega.nz/#!YchFlKhY!Ggl42bietkJEqIbTAqgjMP8EOnAMuvU8O_lwnmRU2eg
Radio Modem Full Version 3.1.194:
https://mega.nz/#!BYBRkZLQ!weyHLt0bf2FG867vJhTpR3EBakLx9Zr9eJGbBBiMrS0
Radio Modem Full Version 3.1.218:
https://mega.nz/#!9FQyHTRZ!OAG2uJ0wFj1TdjZN0Ji46JEKXncNOYtU2ftJUJOwv-E
Radio Modem Full Version 3.5.204 DEV (take care, it is a DEV version!): https://mega.nz/#!1BxRDRJD!ltxiIj3kNKF2716sDPqk0FXVo7AapoR_RlZOsTHHIt0
Radio Modem Full Version 3.5.231 DEV: https://mega.nz/#!QABjSIYK!ryiyENe8S1x8e7_Bpiber8v0eC9B4NhAnQUfOxZpXSA
Radio Modem Full Version 3.5.243 ST: https://mega.nz/#!IAJ1yQpI!yosyVMnSET0gQTAjDrvLARwUDkOU_W8AFXiC_W_tA5Y
Radio Modem Full Version 3.5.259 ST leaked:
https://mega.nz/#!oB4GUZiR!tmQ0hzCZS7HE5zUBwnHz13fJZghKQA4YmAbZJfz-CPo
Radio Modem Full Version 3.5.316 ST leaked:
https://mega.nz/#!FRInVZwa!AshSEqg8tib6tdnenzFz3mHh5bHGpR4h__0QcYW1-WI
Radio Modem Full Version 3.5.344 ST:
https://mega.nz/#!FMQFWY4S!9W2Cct_sSZFEf7SL0cPzJ9xEeUuIwK5LMk0_xZZdGzY
Radio Modem Full Version 3.5.376 ST:
https://mega.nz/#!4RIV0bKD!NPkX6AfCVs9sAJo8thD7dGBaEiqH2D88zvmj-xeeISU
Radio Modem Full Version 3.5.388 ST:
https://mega.nz/#!UdxhGAaQ!nbiIRoSFV5158aaE8wSz1tbHT8QaFyqpxKHkW0TFsJA
Radio Modem Full Version 4.0.191 DEV:
https://mega.nz/#!xJJAmKgQ!hnltiAY3_PEHDDvAoRwTDxYsv3OvhehZhxDzmsj-Fdg
RadioModem Full Version 4.0.233 ST:
https://mega.nz/#!QYJBVY4J!JQxAF1QBBcYRBQgTQzwOI-F2CSrdiUJ_Cxm0KvIvvbI
RadioModem Full Version 4.0.247 ST:
https://mega.nz/#!BYRiwYyA!1KU2-2Ovq2yB9RvaXCv95EFt_2aGNaziQ8Qka7R0ab4
No wipes necessary after flashing.
Flash with twrp.
I used latest official twrp and RedWolf Twrp for testing
No difference in basband version shown in system so don't get confused. In system you will always see the same baseband version. This is normal even if there are changes made between the versions according to changelogs of ZUI updates. There are even more changes in RadioModem (WiFi, Bluetoooth etc.). But changelogs from ZUK are not really detailled
-------------------------------
TroubleShooting:
Problem: After reboot your phone requires your usual pin on lock screen. But even when typing correct pin it will switch back to lock screen.
Solution: Reboot to twrp.
In twrp start file explorer (find it under advanced)
In folder data/system delete all files beginning with "locksetting". Usually one to three files.
Reboot. After reboot no pin is necessary, you need to re-setup again.
Problem: I get no LTE / 4G signal anymore. HELP!
Solution: Thanks to @vickdu31 and @juyer there is the following mini guide:
- Download 3.5 latest baseband from this post
- flash it with twrp.
- Extract .zip of baseband
- Reboot to fastboot
fastboot -i 0x2b4c flash modem NON-HLOS.bin (this file is from .zip baseband)
fastboot -i 0x2b4c erase modemst1
fastboot -i 0x2b4c erase modemst2
fastboot -i 0x2b4c reboot
LTE working instantly.
-------------------------------
Enjoy mates
So can this Radio Modem / Basebands inprove 4G signal to get a better performacne?
It can help you if you experience problems with connections like wifi, 4G or bluetooth.
And it can help you installing custom roms.
Most of the Android 7.1.2 based custom roms need a baseband of ZUI 2.5.xxx and upwards.
CustomRoms based on Android 6.0.1 need a baseband of ZUI 2.3.xxx
And finally with that basebands we all can participate on the improvements ZUK did.
thanks i was just looking for that , my 3.1.194 modem is giving me issues i'll try the 2.3.044 ,
thanks again
Hi,
how do i update my baseband Version using twrp?
I was trying to Flash lineage OS 14, but ended up with the "perma blue LED crash" while connecting to Wifi.
Is there a guide how to update baseband on ZUK Z2 Pro?
download the baseband zip. Flash it with twrp. Easy.
like flashing a custom rom?
GargoyleTGA said:
like flashing a custom rom?
Click to expand...
Click to collapse
Y E S !
I flashed the Radio Modem Full Version 3.1.194 but the baseband number is still in the settings. It is normal?
weimerd said:
...No difference in basband version shown in system so don't get confused. In system you will always see the same baseband version. This is normal even if there are changes made between the versions according to changelogs of ZUI updates. There are even more changes in RadioModem (WiFi, Bluetoooth etc.). But changelogs from ZUK are not really detailled
Enjoy mates
Click to expand...
Click to collapse
read mate, READ!
updated 1st post with baseband of 3.5.204 DEV version.
And added full version of 2.5.462.
Thanks @crisps
i have clean installed lineage 14.1 after wiping system cache data and dalvik cache, do i have to flash the latest basebands?will i notice any difference?
you dont have to
Usually basebands are flashed if there is an existing problem for you which may be solved by flashing a baseband.
Android 7 based CustomRoms usually need a baseband from ZUI 2.5 upwards.
Android 6 based CustomRoms usually need a baseband from ZUI 2.3
Some reported that baseband of 3.1 made connection reaction of phones faster. I dont know if it is a psychological thing. For me it feels faster as well.
So in conclusion: If you dont experience problems you dont need to flash baseband.
If your Rom is crashing with black screen and blue led flashing baseband of 3.1 may solve that.
Hope I could help you
Merry Christmas!
I have this baseband version: M8996FAAAANAZM-1.70664.3.76387.1
Is this the latest? (zuk z2 pro 6gb-128GB)
dumbl3 said:
I have this baseband version: M8996FAAAANAZM-1.70664.3.76387.1
Is this the latest? (zuk z2 pro 6gb-128GB)
Click to expand...
Click to collapse
please read 1st post again
baseband version in about-screen is always the same, even if versions are really different bezween ZUI versions.
added 3.1.218 in first post.
Radio Modem Full Version 3.1.218:
https://mega.nz/#!9FQyHTRZ!OAG2uJ0wFj1TdjZN0Ji46JEKXncNOYtU2ftJUJOwv-E
weimerd said:
please read 1st post again
baseband version in about-screen is always the same, even if versions are really different bezween ZUI versions.
Click to expand...
Click to collapse
So I'm a little confused. You're saying that flashing the 'new' baseband won't change the baseband version number in the about screen, but it will make changes 'under the hood'? Did they forget to change the version numbers with the baseband updates?
dumbl3 said:
So I'm a little confused. You're saying that flashing the 'new' baseband won't change the baseband version number in the about screen, but it will make changes 'under the hood'? Did they forget to change the version numbers with the baseband updates?
Click to expand...
Click to collapse
I don't know the reason of ZUK not to change the baseband version number. They're Chinese
But according to ZUKs own changelogs there are changes
Especially Wifi and Bluetooth issues are handled as well as some 4G issues.
You can use the basebands or not. It's up to you. If you don't experience problems you dont need to flash.
Is it possible to go back to an earlier version by reflashing it?
Flash full packets