Anyone found the best settings for TCPMP or Coreplayer to play movies on the TMO HD2? I saw a thread for the regular LEO, should I use the same?
I can't get high-quality rips to play on TCPMP, just crashes, regardless of Directdraw or GDI. And the HTC media player won't recognize these files (via albums).
I suppose I just need use lower-quality rips, but that's extra work. Any tricks to get the HTC media player to play them?
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
+1
Sticky please!
godsafk said:
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
Click to expand...
Click to collapse
I agree on this one
HD Encoder is also pretty nice for ease of use, but don't know if the default settings are as good. It's basically just a front end for mencoder.
http://forum.xda-developers.com/showthread.php?t=467112
godsafk said:
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
Click to expand...
Click to collapse
thanks, I guess I just have to reencode the files. what software do you prefer?
The settings I posted are for MediaCoder(Freeware). Great software, and its free
godsafk said:
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
Click to expand...
Click to collapse
+1 Sticky!
Works great thanks for the settings!
Thanks for the post, gonna try these and see
godsafk said:
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
Click to expand...
Click to collapse
I tried this last night and let it encode thru the night, the result was a playable movie on my computer but unplayable on my HD2. I'll try again tonight.
I dont know why to reencode ... CorePlayer plays almost everything straight from DVDRip w/o encoding. I agree that encoding into MP4 and having HTC Album play it with hardware acceleration may be better, but that requires encoding ... takes lots of time unless you have fast PC.
Personally I just play everything w/o encoding. Even over home WiFi it works ok. On my older HTC HD some files required reencoding.
good settings video 10/10 but audio is not good just 6/10
please change settiings for audio
to make it better and good
thank you
godsafk said:
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
Click to expand...
Click to collapse
I agreed that using WMP is the best. I have tried and researched just about everything out there.
My suggestion is use http://www.imtoo.com/video-converter.html
With this setting
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you use that setting of bitrate @ 2000Kbps you will get really really clear picture (HD style) with flawless smooth as butter play back. I was worry at first about the high bitrate setting but the WMP play it without a hiccup.
Although the software is costly, it will be worth it if you want HD playback.
Oh, remember to convert from a 720p .mkv source to get best result. Don't try to convert DVD movies because the source has lower resolution.
good settings video 10/10 but audio is not good just 6/10
please change settiings for audio
to make it better and good
thank you
help me please
good settings video 10/10 but audio is not good just 6/10
please change settiings for audio
to make it better and good
thank you
Edit/Delete Message
godsafk said:
After much testing/researching, I have finally found the best solution to encode video files to .MP4 for flawless playback on the HD2 using MediaCoder. I have tried many of the other methods and settings provided by others on this forum and many of them were good, but simply took too long or sometimes caused choppy playback on the HD2.
MediaCoder Settings:
Format: H.264
Mode: Average bitrate @ 1200Kbps
x264 Profile: Baseline
Audio encoder: FAAC
Audio Format: LC-AAC
Audio mode: Average bitrate @128Kbps
Container: MP4
Resize: 800x450
Aspect ratio: Set PAR 1:1
With these settings I have tested 12 different files ranging from 500MB-1.8GB in size(720p quality) and the largest took 34 minutes on my dual core CPU (intel i5). First tried playing the files with HTC Album player and CorePlayer and the results weren't very good and they included a lot of choppiness. After reading some others success with WMP, I decided to give it a shot and I was pleasantly surprised to find that it played the .MP4 files beautifully and without a single hiccup.
Some of you may already have solutions for encoding videos for playback on the HD2, but I have found these settings to be perfect for anyone who wants to encode HD .MKV files.
I can honestly say these settings will give you amazing quality and smooth playback, even in the most intense action scenes
Click to expand...
Click to collapse
Related
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
search for TYTN + TCPMP on this forum... this has been discussed A LOT.
pergolesi said:
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
Click to expand...
Click to collapse
Hi there & welcome to our videoplayback problem:
http://forum.xda-developers.com/viewtopic.php?p=354421#354421
It's not all bad, but I can't find any workaround for the meantime. Look out for The CorePlayer (The new TCPMP), hopefully when released, it will address these issues we have discovered. Meantime I am using 'ImToo_DVD 2 Ipod Converter' , which converts to high quality Mp4 format and plays back just fine for now and is definately on par with Divx/Xvid AVI encoding at 768kbps! It also converts a whole film in practically 20 mins plus compared to PocketDivx_Encoder or DVDx.
I have tried the Im too to ipod converter, and have had some very pleasing results.
Could you possibly let me know what settings you have checked/unchecked in TCPMP, for optimum playback of the resulting mp4 files?
Thank you very much, your help and advice is greatly appreciated.
Best regards
Pergolesi
yeah I had a good experience converting to mpeg4 except the filesize was much larger (almost twice the size as divx) is this the norm cause of divx compression?
MPEG4 Videos in TCPMP
Personally, I use the following settings for ImTOO DVD to iPod Converter:
Video Bit rate:512 or 768 (difference is negligable but size is better @ 512kbps)
Audio Bit Rate:64
Sample rate:22050
Channels:2
Video Size:320x240
Profile: iPod MPEG-4 Movie (*.mp4)
Zoom:Full (keep aspect ratio)
Split:Infinite (though it's nice to have a DVD encoded in the chapters it came in - TCPMP will play them in the correct order if saved as 'playlist')
**Do Check the Audio settings (under the Menu bar) as your DVD will probably have options for differnt Audio i.e English.
I know more settings are available, but this is a short-term fix for me (with acceptable results for me) until the new 'CorePlayer' is released.
In TCPMP the settings really don't make much of a difference either, but just make sure you have 'Video' set to 'Rawframebuffer' mode. I have found that all AVI and MP4 playback without major gripes, but the MP4 gets better results whilst benchmarking using 'ATI decoder'. Fat load of good that does you when it comes to playback though (back to rawframebuffer mode).
P.S. for smaller filesizes, just reduce the video bit rate like you would in AVI encoding.
MPEG4 Videos in TCPMP
Great info, I'm sure others will find this just as helpful as I have.
Thanks again.
Pergolesi
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
ruirocha said:
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
Click to expand...
Click to collapse
I use Rawframeuffer mode, but GDI will do also. Though benchmarking yields better results in Rawframebuffer mode for me.
I'm using TCPMP. I set ATI IMAGEON Decoder on.
When it start, the screen is not viewable.
But I press the action button, when the movie plays it is normal.
When I paused and resume, video play with low frame rate.
I goto Option, Speed, Select 100%, it's normal.
The Blackstone is the first smart/windows mobile phone i have had so after recieving my phone i tried some of my video files but (as i expected) windows media wudn't play them, i have seen on other threads that alot of people mention Core Player 1.2.5 and wondered if anyone could give answer me a few quick questions:
1. Does Core Player play most formats (im trying to play x264.mp4 and dixv .avi)
2. Where can i find Core Player?
3. is it a free program? if not how much is it in GBP?
Go to www.coreplayer.com and see for yourself. I think on their homepage they anwser pretty much all your questions.
Ascenca
Thanks - Don't know why didn't find their site!
I had this problem - Core Player 1.2.5 plays all files perfectly on the HD - commuting will never be the same again...
Which version do i need?
CorePlayer Mobile For PocketPC / Windows Mobile
CorePlayer Mobile for SmartPhone
I assume its the SmartPhone version?
This is the version you need: https://www.mobihand.com/cart1.asp?posid=130&pid=8905
(mobile/WM)
HD is a PocketPC
working
Coreplayer 2,5 works perfectly.The PocketPc version the smartphone one is for devices without touchscreen.
Its a commercial software.
Ideal is to use the Qtv display as video output.
I tried different encoded format and the best result is encode the avi files with following attributes:
dimension 640*480
Bitrate between 700 and 750
Framerate 25fps
Audio MP3
Stereo 128kps
Frecuency 44100 Hz.
You can use a higher bitrate till 1200 , but the video doen't play always very smootly then
I tried a couple widescreen (960x540) files in different formats (wmv, mov, avi) with coreplayer 2.5, and none of them would play anywhere near smoothly. the mov played with about 1.5 fps, the wmv with about 5 fps und the avi with something like 7 fps. do any of the numerous settings in coreplayer need to be changed or is the device simply not powerful enough for full native resolution video playback?
just tried some more videos, this time a 1 MBit/s 480x270 wmv file, and even that couldn't be played in any useful way:
played frames: 85
dropped: 447
did you change anything in the core player settings to achieve proper playback?
obstler said:
I tried a couple widescreen (960x540) files in different formats (wmv, mov, avi) with coreplayer 2.5, and none of them would play anywhere near smoothly. the mov played with about 1.5 fps, the wmv with about 5 fps und the avi with something like 7 fps. do any of the numerous settings in coreplayer need to be changed or is the device simply not powerful enough for full native resolution video playback?
Click to expand...
Click to collapse
Firstly, the issue with the video files comes from the fact that they're larger than the resolution of the screen. (your video=960x540, HD=800x460) This means that as well as decoding and playing the video, it also has to scale the video down to it's resolution. This is why it's stuttering. Full native resolution video playback is 800x640 which, incidentally, is the native resolution of DVDs, so if DVD rips have been encoded properly, should not need resizing or re-encoding to play on the HD. (feel free to be skeptical of this, I don't own a HD yet so can't confirm this)
The 1Mbps file possibly wasn't playing properly for that exact reason, it was 1Mbps. As BerreZ states, the highest bitrate to get good playback is 750Kbp
Thanks, got CorePlayer up and running now works like a dream!
I'm waiting for funds to clear so i can finally order one of these bad boys. I'm not too demanding when it comes to video playback on the phone. 700KBPS is the standard encoding of dvd rips isn't it? like, your traditional torrent movie file.So it looks like we can play them on the HD then using coreplayer? I'm not to concerned about HD quality playback and i've been using an XDA2i for 5 years, mainly for clips and such when bored at the bus station .
Maybe with a higher capacity card I might throw a movie or two on there
....IB a n e
BANE said:
I'm waiting for funds to clear so i can finally order one of these bad boys. I'm not too demanding when it comes to video playback on the phone. 700KBPS is the standard encoding of dvd rips isn't it? like, your traditional torrent movie file.So it looks like we can play them on the HD then using coreplayer? I'm not to concerned about HD quality playback and i've been using an XDA2i for 5 years, mainly for clips and such when bored at the bus station .
Maybe with a higher capacity card I might throw a movie or two on there
....IB a n e
Click to expand...
Click to collapse
a)Native DVD resolution is not 800x640
b)700Kbps is not the "Standard Encoding" for DVD rips.
bitrate will depend on the size of the encode, the length of the movie.
Apologies, my mistake.
...Ib a n e
Urgh -it's payware. Another cost.
Is there a decent free avi/media player?
One time, I got a cab, but lost it, with some codecs to play divx and other on the Media player. Does anyone knows something like that??
I just purchased CorePlayer. It gave me v1.3.6 not 2.5. Anyway I have tried a divx and avi film. With both I just saw a green haze for a bit and I needed to soft reset the device to recover.
I downloaded the cab not exe and installed it directly onto the device. My films are on storage.
I get a "Copy & Convert" dialogue box with "Convertion (None)" and it seems to do nothing for a while but it does seem to copy the file across ok. What that means is I can see it in explorer. That said it seems to take several runs at it and the bars never go beyond three or so.
Have I just got the wrong resolution?
Any ideas?
I think it's about time for us to clear a few things up concerning video playback on the X1.
The X1 can play most codecs using Coreplayer Mobile.
However, to optimize video's for the X1 and windows media player, a converter such as SUPER can be used.
Please note that optimizing your X1 is advised. See this thread for more information.
Now what I would like to find out is what settings work best for the X1 to playback video with a few different preset configurations.
What we need to know is the optimal:
Resolution
Framerate
Video Codec
Video Bitrate
Audio Codec
Audio Bitrate
Audio Sampling Frequency
Container
And any other/better tools to use.
To be able to better compare results I've uploaded the Crysis Warhead HD Trailer. You can download it here.
Please use this trailer to compare and post your settings in this thread.
This thread will be updated with new information as it arises. The second post contains an example of settings I used and will be updated with user posted settings that work well.
--- Important information ---
* CorePlayer is not hardware accelerated. This means that CorePlayer is more likely to play your video's choppy. The built-in media player, however, does have hardware acceleration. To get the best video performance, at this moment the built-in media player is your best choice.
* The h.264 codec is supported by the built-in media player and currently has the best compression vs quality ratio.
--- Downloads ---
Coreplayer Mobile
SUPER
--- Source file ---
Setting: HD Quality - 63.4MB @ 0hrs, 1min, 32sec.
Resolution: 1280 x 720
Framerate: 30
Video Codec: WMV9
Video Bitrate: 6090 kb/s
Audio Codec: WMA9
Audio Sampling Freq.: 44100
Audio Bitrate:: 96 kb/s
Container: WMV
Download example here: Source file
--- Settings --- Here the optimal settings will be provided as they become available.
Configuration: Low Quality - 4.7MB @ 1min, 31sec. (+- 280MB for 1.5hrs of movie)
Resolution: 400x240
Framerate: 25
Video Codec: h.264
Video Bitrate: 192 kb/s
Audio Codec: AAC
Audio Sampling Freq.: 22050
Audio Bitrate:: 64 kb/s
Container: mp4
Download example here: Low Quality
Configuration: Medium Quality - 5.9MB @ 1min, 31sec. (+- 350MB for 1.5hrs of movie)
Resolution: 400x240
Framerate: 25
Video Codec: h.264
Video Bitrate: 384 kb/s
Audio Codec: AAC
Audio Sampling Freq.: 44100
Audio Bitrate:: 96 kb/s
Container: mp4
Download example here: Medium Quality
Configuration: High Quality - 10.4MB @ 1min, 31sec. (+- 620MB for 1.5hrs of movie)
Resolution: 608x368
Framerate: 30
Video Codec: h.264
Video Bitrate: 768
Audio Codec: AAC
Audio Sampling Freq.: 44100
Audio Bitrate:: 96 kb/s
Container: mp4
Download example here: High Quality
Configuration: Highest Quality - 16.8MB @ 1min, 31sec. (+- 1000MB for 1.5hrs of movie)
Resolution: 800x480
Framerate: 30
Video Codec: h.264
Video Bitrate: 1294 kb/s
Audio Codec: AAC
Audio Sampling Freq.: 44100
Audio Bitrate:: 128 kb/s
Container: mp4
Download example here: Highest Quality
---
When posting settings, supply the same information as I do here.
Good you have come up with this.. once we all share I think we can reach to as what best converter settings we can use for X1... After reading lot of material... I use these settings which gives me full screen decent/smooth run movies.. had no problems at all... but don't know if they are the best settings... check it out :
Xvid MPEG-4 Codec, 569 Target bitrate, 23.976 fps, Screen Size 640x384, Sound Mp3 128 to 160 kbit/s. Encoder used : TMPGEnc 4.0 XPress. ( The best converter with total cut/edit features )
Let me know the results.
Nero Recode 3
AVC in MP4, 400x240, ~400kbps
HE-AAC, ~80kbps,
Runs excellent in the Mediapanel and did quite good (but worse) in the Coreplayer 1.2.5, when I still had it installed. Switched to the Panel completely for playing back my mp4 rips.
Uh, theres a template. Well then, again:
Resolution 400x240
Codec AVC/h.264
Framerate 25 or as source if lower
Video Bitrate ~400kbps
Audio Sampling as source
Audio Bitrate HE-AAC, ~80kbps
I have tried so many diff combination but still haven't found one optimal to use with the x1. This thread will be great for me to do more testing. I usually super or aimersoft. Please chime in if you use those above software to encode video.
I'm at work right now so can't be 100% sure, but as I remember (it's discussed in threads in the main SE X1 forum section) for the highest quality you can get on x1, encode the files for Baseline 1.3 h264, 800x450 max resolution, 30fps, and play them on wm media player or the media panel.
Videos will not run well at anything near that resolution on core player or tcpmp, they don't use the hardware acceleration that's available to media player and the media panel, although tcpmp and coreplayer will handle many more codecs.
Thanks for the additions people, I've uploaded a better video file to test with. It's HD by default so you can actually see the difference between high quality encoded and low/medium.
For those who post configurations, please (please!) stick to the template, I will try and reproduce the settings so I can judge them and add them to the topic.
I would like more information on the hardware acceleration topic as well;
1) Why isn't coreplayer hardware accelerated?
2) Can it be changed so it is?
3) Are there any other/better video players out there?
Because the driver specifications are not available and the hardware cant be accessed by third party programmers
CorePlayer team said in their forum they got hold of Qualcomm and are working to provide hardware acceleration for any MSM7xxx chipset having the graphics hardware in one of the next builds of the player
Better regarding what aspect?
Thanks for your reply. I'd like to see what CorePlayer can do if they manage to get the hardware acceleration working.
Better regarding smooth playback and codec support. Perhaps there's a way to add codecs to the Winmo media player?
EDIT: Updated with new configurations, all based on h.264 (for best compression/quality ratio)
EDIT2: Added another setting, tested for quality and uploaded all examples for your viewing pleasure.
EDIT3: Tested the movies on my X1. From low to high the quality is visibly better every time, so that's a good thing. On the highest quality setting proposed above, the graphics were stunning, however, it ran choppy, it looked like my X1 couldn't keep up with that high bitrate & resolution. I'd like more opinions, who else will test them!? (Tested with windows mobile media player).
Who can help me test the highest settings?
Angelusz said:
EDIT3: Tested the movies on my X1. From low to high the quality is visibly better every time, so that's a good thing. On the highest quality setting proposed above, the graphics were stunning, however, it ran choppy, it looked like my X1 couldn't keep up with that high bitrate & resolution. I'd like more opinions, who else will test them!? (Tested with windows mobile media player).
Click to expand...
Click to collapse
Look at my post (#31) here:
http://forum.xda-developers.com/showthread.php?t=460294&page=4
especially this:
Jabe said:
2.) this one is the important one. Do not change screen resolution. Original file was 624x352 and when I set it to 800x like you suggested the playback was somewhat jerky when people were moving. So I set it to "no cnahge" and gained 2 things:
- output quality was far superior (i don't know about that if you choose smaller resolution, like converting HD to 800x)
- the conversion is much faster. before it took 1h10min, now it takes 45min. in other words, encoding speed went from 0.7x to 1.0x.
Click to expand...
Click to collapse
I think we are talking about the same thing. I've noticed that increasing resolution does cause some problems. I use Media Panel for playing my videos.
I do use the Mediapanel as well, it might be imagination but I found it to be the best player regarding playback performance.
Upscaling a smaller source file in image size will worsen the quality massively. Think about how a codec works: upscaling means making the image look "soft" or "washed out". These soft or washed out images are then used by the codec to predict differencies and/or movements between the frames and then this data is used to render the subsequent frames. Since the whole image (being washed out) figuratively looks "all the same" (its just a soup of different unspecific colours) the codec has hardcore problems predicting movements between the single frames. Thus the prediction is bad, based on an already bad image, multiplies the bad effect onto every subsequent frame.
Display Driver Assist - Does it improve video ?
This is an interesting thread, please let me add my experience of converting and watching video on my Xperia.
Firstly this program DVD Catalyst won the top award for converting DVD to almost any format to any resolution, any bitrate.
Here is the URL : http://www.pocketdvd.ca/products/dvd catalyst 3.html
Here is the URL for SmartPhone Awards list for all the best in catagory software for video coversion for Pocket PC 2008.
http://www.smartphonemag.com/cms/awards/2008/winners_ppc_apps#CatDVD_Converters
If you download the trial of DVD Catalyst you can have 15 days of free fully functional DVD conversions, thats enough to convert almost anybodies collection. I do intend to buy this when I get round to it.
I experimineted with different formats and resolutions and here were my conclusions.
Format - Sony Media Panel seems to like the 3gp format best ( subjective )
Resolution - I use the maximum 800 X 480
Bitrate - 750 kbps though 500 is still very good.
Audio 128 kbps Stereo
All these options can easily be changed in the converter, you can set your PC Processor prioirty to high ( recommended) or highest if you not doing anything else and a complete 2 hour DVD, with high prioirty for processor will be converted and ready for copying to your X1 in about 35 - 40 mins.
Also I found my Xperia settings had an impact on video playback quality, none more so than Glyph cache, which I now have at 128kb.
I am currently experimenting with the " Display driver preloader " you can find on the thread by ell82...http://forum.xda-developers.com/showthread.php?t=462346
In it he uses this file, libgles_cl.dll, copied into the windows directory, to add hardware acceleration to some 3D games. This as close as we have come so far in adding hardware acceleration across the board to all programs on the X1, obviously this needs some testing and benchmarking, something this thread is very good at.
This file does not replace any windows files, you can add it to WINDOWS folder and remove it at will, it doesn't hurt, over right or harm anything.
Im using it on and off, id like to see some hard data on it, it may not be the magic bullet we have all been waiting for, but it could be a move in the right direction.
View attachment 139876
Mark A Cilenti said:
Format - Sony Media Panel seems to like the 3gp format best ( subjective )
Click to expand...
Click to collapse
3GP is not a format, its only a container. The content, video wise, is either SP, ASP or AVC video (mostly, accepts a wide range of codecs though) and audio is AMR or AAC. In fact you don't follow the standard at all, your files are NOT 3GP COMPILANT. Since 3GP is just a simplified version of the MP4 container anyway, of which the latter is more versatile regarding possible content and resolution restrictions, I would definitely abandon 3GP and go for MP4. Of course with AVC video and a flavor of AAC audio.
Maybe noob question (I haven't got an sdhcmicro card so cannot test myself):
On my hx2790 tcpmp (ver 0.72, last version) always worked a treat on default 700-1500mb divx and xvids. You loaded lots of movies on a 8gb card and opened them with tcpmp. Some movies required AC3 sound and there was a plug in for that too. The movies played back 100% flawlessly.
Can we not just do this in the X1?
gold333 said:
Can we not just do this in the X1?
Click to expand...
Click to collapse
no, not yet.
700mb dvd rips run fine in coreplayer, but for fast scenes it lags like hell
Here's what I do:
Open PocketDivXEncoder
Select the 'HD TV' option
Resize to 400xABC (maintain aspect ratio)
Video quality = 70
Audio = max
Coreplayer runs it flawlessly and looks great, even fast scenes.
Watched the first season of both Burn Notice and Merlin with no issues in action packed scenes
totally agreed with coreplayer ! really better than movie player in the XMB Panel !!!! you can find my thread here : http://forum.xda-developers.com/showthread.php?p=3093597#post3093597
Don't know why it is so slow with the XMB Panel & so better in core player !
Core Player : reverserd enginered the chipset.... really difficult thing & to be really/fully optimized but it works better than the std XMB movie player !!!! (written by who ? sony developers or htc ? or together ?, they should buy corecodec ! )
dadeadman said:
700mb dvd rips run fine in coreplayer, but for fast scenes it lags like hell
Click to expand...
Click to collapse
But tcpmp 0.72 doesn't? Tcpmp was the ultimate micro footprint everything player for mobile devices.
Hello everyone,
I have seen a number of different posts about the best settings to encode videos for the Droid X, and I have found a method that I am extremely happy with. I use these settings to encode HD MKV files for playback on the Droid X. These encodings play without a hitch, and only suffer slight sync issues that occur when changing volume, and skipping forwards/backwards into the video. This is not a huge problem, as the sync issues only last for 1-2 seconds maximum. I have tested a large variety of Video players, and I have found that RockPlayer offers the smoothest playback available (in my experience). These settings will also work for many other file types, just make sure your Source resolution is higher than that of your output and you will be pleased!
Software Required: MediaCoder (Free, can be downloaded HERE)
Settings
Video Tab:
Format: H.264
Mode: Constant Bitrate (1400)
Source: Auto Select
Encoder: Auto Select (If your video card supports CUDA, select CUDA Encoder for faster encoding).
x264 Tab (On the right when selecting the Video Tab):
Profile: Baseline (This is extremely important!)
Sound Tab:
Encoder: FAAC
Format: LC-AAC
Average Bitrate: 160
MPEG Version: MPEG4
Container: AAC
Container Tab:
Container: MP4
Picture Tab:
Resize: 848x480
Aspect Ratio: Keep Display AR
Crop: Disabled
Frame Rate: 25
Effects: Filter by Encoder
I hope these settings will come in handy for others. I have spent a lot of time testing different settings and Encoders, but I can honestly say I have gotten the best results using these!
Let me know how these settings work for you, I hope some of you can help me find a video player that will not show any issues when changing volume and skipping forward/backwards through videos.
Hello all I just got my E Pad and looking to load some movies onto it.
Can anyone tell me the best format to use for quality. I have an 8Gig Micro to use for videos. I also use DVDFab for converting.
Thanks
Diverwes
I'm wondering this as well. I've seen a few threads on here regarding 720p settings, but how about non-hidef? What would people recommend using? I copied some movies over to my TF when I first got it and the playback was horrible, regardless of what player I used.
abeln2672 said:
I'm wondering this as well. I've seen a few threads on here regarding 720p settings, but how about non-hidef? What would people recommend using? I copied some movies over to my TF when I first got it and the playback was horrible, regardless of what player I used.
Click to expand...
Click to collapse
Anything works for non-HD, just make sure you play it with something like Mobo Player, the default player doesn't support that many formats, nor does it play it as smoothly. In terms of HD, just look at the handbrake preset or install Mediainfo to check what profile your h264 video is at (Baseline, Main, High), it usually is Main/High. If it is 720p High, you may try playing it, but anything with more than 3 reference frames will lag.
something weard is i converted some movies they play but only at 2x they fly through.
diverwes said:
something weard is i converted some movies they play but only at 2x they fly through.
Click to expand...
Click to collapse
I had this issue too. The file was an MP4 H.264 encoded file but the audio codec was not in stereo.
I re-encoded the movie using AVS Video Converter with these settings:
Frame Size: 1280x 720 (depending on movie format)
Video Codec: H.264/AVC
Frame rate: 24fps or match source video
Bitrate: 1500KBs video
Video Advanced: Multi-pass (first pass fast)
Audio Codec: MPEG-2/4 Audio 192KBS Stereo not 5.1
File type: MP4 PSP
With these settings, high def videos play awesome on my Transformer both on stock player and Rock Player with hardware decoding setting.