Hey,
I have several onscreen keyboards (OSK) installed on my device. Most of the time i type in arabic when using the OSK, so i always have to change from english to arabic which i find is annoying. Is there a registry key change to have windows always use the arabic keyboard?
Check out this thread and then change your keyboard as you like: http://forum.xda-developers.com/showthread.php?t=255225&highlight=registry
I have a Touch and installed SPB FSK trial.
I set it as the default keyboard but after each softreset, the touch keyboard is the default one when I type...
I think I already saw a registry hack for this but can't find it...
thank you
I use sipchange to set the default keyboard on startup.
http://forum.xda-developers.com/showthread.php?t=271008&highlight=sipchange+sleuth
Hi, ive downloaded the finger keyboard app yet whenever i go to options to set it as my default virtual keyboard it returns to the orginal. Help! thanks
Use SKTools, go to maintenance and then go to input options to change default keybaord
i have htc magic and i want to know how i can have both qwerty and phone keypad? now i only have the option between qwerty and pinyin, handwriting and stroke..
how can i remove those and have other options such as phone keypad?
Search for HTC_IME.apk here. This gives you the phone keypad and qwerty from HTC.
i already have the phone keypad and qwerty from htc, what i want is to know how to remove the chinese input and replace it with phone keypad, so when i type, i have only the 2 options of qwerty and phone keypad and not the chinese input or handwriting and stuff..
If you have both HTC_IME and HTC_CIME, then under Settings -> Locale & text, there should be a Touch Input Chinese checkbox where you can uncheck... ?
i can uncheck touch input, but there is no option to uncheck touch input chinese....can you help me uncheck it somehow or disable/uninstall it?
i tried using astro to uninstall it but it says it cannot be uninstalled
I've installed Swype and really like it. I'm using SIPchange to enable it as a default. Unfortunately, XT9 will interfere with the words selected by Swype even after you've picked the right word. The only way to disable this is to manually change to Touch Input keyboard and disable XT9 on the keyboard before changing back to Swype.
I've already disabled both Spell Correction and Word Completion in Touch Input under Settings> Personal> Input> Touch Input> Options, but XT9 still turns on the next time I restart the phone.
Hi, I'm using swype too and haven't noticed any interference from XT9, but I might not have known what I'm looking for.
What are your symptoms?
I have had that happen to me before on certain Roms... cant tell you which one... usually, it works fine (I am using Topix Rom now)
When it did happen, I turned off XT9 under the settings but I ALSO opened the default keyboard and turned it off there but pressing the key.... moved back to swype after that and the xt9 word options were gone... just the usual swype dictionary/options at times.... Soft reset didn't change anything... it was all ok still
Hope this helps
Unfortunately for me, once I shutdown/soft reset the phone, XT9 is automatically activated on the Touch Input keyboard again even though everything has already been turned off in the Settings>Personal>Input. Also, it seems that the Touch Input keyboard automatically defaults to one of the Chinese input methods instead of English. Maybe that's where the problem lies. Where can I default the Touch Input keyboard to English?
BTW, I have my Locale set as Australia, so that isn't the problem.
The symptoms are: Once you've "Swyped" the word and pick the one you want, XT9 then shows up with it's word choices and either shows the same word or if I have it initial caps, make it all small letters
I also noticed that in Settings>Personal>Input, when I select Swype then click the "OK" button, it doesn't save the selection, and goes back to "Touch Input" when I open the "Input" dialogue again. I guess this probably means that some of my registry entries are toast...
That is indeed weird... do you have something like SIP change installed? I use that to start Swype by default during startup after a restart.. Don't know if that might help...
Yes, I do have SIPchange installed, but it's already set to Swype as the default.
I had the same problem and this is my partial solution.
Go to HKLM/Softwares/Tegic/eT9/IsSupportMSSIPContact
Change the Dword from 1 to 0.
this will get rid of XT9 for Swype but only if it is NOT the default. Therefore, there is the nagging inconvenience of having to change it to Swype every time your soft reset. But it is better than that nothing.
Thanks for the partial solution. It's at least better than what I'm doing now after every reboot, which is to:
1. change Swype to Touch Input
2. change Touch Input to EN so that the keyboard shows up
3. click on the XT9/ABC button
4. change Touch Input back to Swype..
One thing to note, I just went to the registry and there isn't the value you listed. However, there is the following string value:
HKLM\Software\Tegic\eT9\LRU_MS_InputMethod and the value is Swype.
I'm wondering if this is what is causing XT9 to activate when Swype is active.. Do you have this value in your registry? what value is it?
Quick edit to note that I added a DWORD IsSupportMSSIPContact with value "0" and soft reset... Sorry to say that it didn't disable XT9 even if Touch Input was defaulted. Guess my problem is slightly different than yours.
Yes, all those values are the same. Need ot check if you also disable xt9 using some .cab. If not then you will need to do the following:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Ime File
Change it to read as compime.dll
and
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Layout Text
Change to COMP IME
This will disable eT9. Please remember the original values should you want to revert back.
I think that should work.
have fun.
weenween, the two registry values you gave are already what is on my phone..
But XT9 still enables itself when I restart the phone. I've now resigned myself to disabling XT9 on the Touch Input keyboard manually each time I restart the phone.
In any case, thanks for your help.
I have exactly the same problem adn symptoms as GregWee. Must be becasue we both have Hong Kong HD2s where the default english keyboard is PinYin?
I have a similar issue. I have a TMOUS HD2 with QQ 2010 mobile loaded on it for chinese text entry. The QQ keypad has become the default everytime I reboot - entirely unwanted. Somehow it interferes with the contact dropdown list in messaging and email. It has something to do with the T9 staying on when entering a contact name. I installed sipchange but it does not overide the QQ default after a soft reset.
After changing between keyboards a few time it begins to work properly in email and then finally in messages. Right now, since the last soft reboot and playing around, when I am in either email or messages the stock keyboard will automatically switch from T9 to abc when I move the cursor to enter a contact name. The contacts appear as I type as they should. Swype works fine too. I have no idea what I did to get it to work but I have had the same experience several times today. Hopefully I will figure it out.
I would like to know a way to override the QQ as the default keyboard. I think this might fix the problem.
Any suggestions?