Database Users

Battery with 3g

Has anyone experienced the drain on the battery with 3g, as my Battery does not last a night when using 3g, but I was in the 3g free zone (gsm only) during the weekend and the battery lasted the whole weekend.

My battery will drain 50% quicker when in a 3G area, Somtimes I set the device to use standard GSM frequencies to keep the battery alive.

I'd guess it is the switching that causes the battery drain (at least this is the case with most 3G phones ) if you spend a lot of time (i.e. your workplace or home) on a "borderline" area your battery will get sapped pretty quickly
Setting the phone to use one band and stick to it (practically , this has to be GSM / 2g for a constant signal ) is the best soloution , until such time as blanket 3G coverage
Pain in the neck really

shark1 said:
Has anyone experienced the drain on the battery with 3g, as my Battery does not last a night when using 3g, but I was in the 3g free zone (gsm only) during the weekend and the battery lasted the whole weekend.
Click to expand...
Click to collapse
same with me, i need to plug in the charger every ~40 hours. i live i 3G area, also using web'n'walk often...

I get way less than this. I have push email enabled, which keeps the internet connected constantly. However in my house I only get one-bar of 3g - often flipping to full four-bar GPRS
I only get about 24 hours between charges!

I have got serious 3G battery draining problems too.
How do I set up the TyTN to only use 2G ??
Thanks,
Martin

- Tap the phone icon on the top menu bar;
- Select settings;
- Select band;
- For select your network type: select GSM
- For select your GSM/UMTS band: select Auto
This setting works great for me on Cingular on an old AT&T SIM in and around Washington, DC. THe battery life is also very good. Also remember as posted on another thread in this forum that even if you do not have 3G yet in your area, if you get EDGE, you will see faster speeds on the TyTN. The TyTN has a new feature called Extended TBF Release which improves the overall throuput.

3G instead of HSDPA while sleeping?

As we all know, Galaxy S has major issues with the battery life, one of the biggest hogs being the HSDPA data connection. From my experience, HSDPA drains 5-10% per hour in standby on my Galaxy S, while the WiFi connection drains almost nothing during a 3 hours standby. So I was wondering why doesn't Samsung thought of replacing the HSDPA with 3G or even 2G (GPRS/EDGE) while the display is off? HSDPA should be active only when the connection is used by the user and not the background services like gmail sync. Push mail notifications work with slow connections like GPRS so why not give the battery a rest? Do I have a point and if I do, is there a solution?

on my phone HSPA is only on when I use data. It switches to UMTS (3G) when idle. My provider doesn't have any legacy GSM/EDGE network.

Yeah it would have to be a bit more configured than that, with screen off and data idle - for example I stream internet radio and constantly have the screen off, with 3G only speed there wouldn't be enough overhead for it to stream consistently.

Just turn data network mode off on the power menu? Puts the phone to 2g for voice and text....
Sent from my GT-I9000 using XDA App

Install superpower or juicedefender
Elvis is alive and working at Apple

zorxd said:
on my phone HSPA is only on when I use data. It switches to UMTS (3G) when idle. My provider doesn't have any legacy GSM/EDGE network.
Click to expand...
Click to collapse
Mine doesn't work this way. After leaving the phone idle for at least 30 min, when I turn it on, the H is already active. I dont think it switches so fast from 3G to HSDPA. I'll monitor it for a couple of days to see if it falls back to 3G in sleep mode.
Turning the data connection off isn't a solution, at least for me. I want the background sync to work, but not on high speed, because it drains the battery faster.

That's a nice idea indeed. Practically, however, I have 2g all the time and a widget to enable 3g/h when required for browsing etc.

Thats a really good idea. I have tried looking for a widget that switches 2g 3g but can only find widgets that provide a shortcut. Maybe some day...
Sent from my GT-I9000 using XDA App

quantum reception??

hello everybody...just received my quantum 2 days ago (i live in italy)...it was locked to at&t so i unlocked it with a code...but the reception is very bad, so i wonder...if i debrand the phone from at&t perhaps it will get better reception...what u think? because the signal only shows g/3g and no 3g+ or H....i'm a bit worried about that...help please! =)

Beggy90 said:
hello everybody...just received my quantum 2 days ago (i live in italy)...it was locked to at&t so i unlocked it with a code...but the reception is very bad, so i wonder...if i debrand the phone from at&t perhaps it will get better reception...what u think? because the signal only shows g/3g and no 3g+ or H....i'm a bit worried about that...help please! =)
Click to expand...
Click to collapse
If the phone is showing 3G at any time, then you are set up for the appropriate bands to get high(er) speed data transfer and 3G voice. If you only see E, then your carrier is using the other bands and unfortunately, there is no way to reconfigure the phone via firmware.
As far as general reception capabilities of the Quantum, I find it to be superior to the S-E X10 I used to use (I still have it), so I don't think there is anything wrong with the design. What phone were you using before?

drtolson said:
If the phone is showing 3G at any time, then you are set up for the appropriate bands to get high(er) speed data transfer and 3G voice. If you only see E, then your carrier is using the other bands and unfortunately, there is no way to reconfigure the phone via firmware.
As far as general reception capabilities of the Quantum, I find it to be superior to the S-E X10 I used to use (I still have it), so I don't think there is anything wrong with the design. What phone were you using before?
Click to expand...
Click to collapse
i had an omnia 7...but it's the first time i use a phone that comes from the US...dunno, it's weird, because when the omnia was under hspa, tha phone showed me always 3g+...and with tha quantum it shows me always 3g, and very poor reception (only 1 bar)....but the most of time the signal is under gprs only....it's pissing me off =(

You are correct. This phone has really bad wifi and wireless reception. I had flip phone before this and in places where I had 1 or 2 bars before with LG I have nothing, no signal. Yesterday I had to leave Ikea building and turn phone off/on just to get reception because if after spending 2 minutes outside he couldn't lock the signal.
Regarding wifi, at home I have hi-gain antenna on my router. I can take my laptop outside on the parking lot, sit in my car and still browser on the internet. This is around 30m distance through 1 thick concrete wall. This phone is struggling to get signal on the opposite side of the home, behind 2-3 drywall walls.
I constantly have signal changing between 3G and H. Were unhappy with reception.

AT&T phones don't show H+ (3G+), it just reports it as 3G. Signal wise I live out in the middle of nowhere and I got pretty decent signal with it. You can change your primary band settings under the MFG app though (because its AT&T if 2100 is available it automatically swaps to it, although where youre at 2100 may not be a primary band).

[MOD REQUEST] Switch to 2G when screen off

I know this is one app we can try: http://forum.xda-developers.com/showthread.php?t=739530#
But it can't disable switching while do tethering. Can we have this flexible function that we can customize from Settings menu?
I noticed our SGSIII can switch off and on WIFI when the screen on and off. It's good if our SGSIII already have the function what I want and it good enough to now what we do when the screen off, it will not switch to 2G when we do tethering and downloading.

GS2 / note / s3
If network idle, it 's will auto down to 3G umts or HPDPA to keep the battery life.
1 hour with auto sync-> 1-1.5%
2g can save battery ?i think not so much with network online.
Sent from my GT-I9300 using xda premium

As I remember correctly AOKP has this feature under their powersaving settings. From what I can tell from my I9000 I always lost mobile data connection entirely when turning screen back on... took 10-60 seconds to get an active 3G data connection again. That kinda really pissed me off cuz it is very likely you need your internet connection when pulling the phone out and turning the screen on ... and in that case having no connection really sucks.
So I never used that option (besides using manual 2G limitation if wanted).

xos84292 said:
GS2 / note / s3
If network idle, it 's will auto down to 3G umts or HPDPA to keep the battery life.
1 hour with auto sync-> 1-1.5%
2g can save battery ?i think not so much with network online.
Click to expand...
Click to collapse
Thanks for the info. My home town just have 2G connection. I think it's better if it directly connected via 2G, rather than the phone continuously searching 3G line.

[Q] Nexus 4 KitKat. : 3G comparing to Other Mobiles

I have an interesting issue. I have 3G and 2G range in my home. But most of the time Nexus 4 will connect only to 2G (i always put 3G as preferred network mode.). It binds to 3G very very very rarely in some places!!!. But i get consistent 3G in my office or in other locations. So i was under the assumption that it was network problem near my home. But to my surprise all the other company mobiles (Samsung or Micromax etc) binds to 3G always.!!! At Same place, Same time, Same connection, other mobiles have full range 3G but nexus 4 binds only to 2G. What can be the reason...