Does anyone have the issue of their alarm not showing up on the homescreen, even though it is turned on when you bring up the alarm setup screen? My alarm doesn't work, nor does it display, and when it says it is on. Does anyone have any insight, or fix to this problem. Any input would be greatly appreciated.
compare the alarms you set in htc with the alarm details in
settings menu all settings clocks and alarms
you may well find that one set has different alarm sound set, which may or may not even exist.
I have also seen winmo have problems with alarms if you leave the message box blank.
That unfortunately did not work, they both have matching "ringtones" and also the same description, but it doesn't show up. Any other suggestions?
in settings menu all settings sounds and notifications, notifications tab in the event drop down, select "reminders" and ensure show on screen is ticked.
oh and in clocks and alarms, alarms tab, make sure "sound even if phone is set to silent" is ticked (or words to that effect)
make sure the "S" for Saturday which is today is selected.
Heartbreak said:
Does anyone have the issue of their alarm not showing up on the homescreen, even though it is turned on when you bring up the alarm setup screen? My alarm doesn't work, nor does it display, and when it says it is on. Does anyone have any insight, or fix to this problem. Any input would be greatly appreciated.
Click to expand...
Click to collapse
Yup, I too have the same prob, I had similar probs on MANILA 2D on my ELF too..!!!
I think there's some prob with the HTC Manla & Sense..!!!
The only solution is to download some ALARM APP like G-Alarm..!!!
Mine is working fine.
MirasHD2 said:
make sure the "S" for Saturday which is today is selected.
Click to expand...
Click to collapse
That answer was almost cute... almost.
Simple solution, ready...? G-Alarm. OR, OR, OR... SPB Time.
I have this same issue, and it is not a specific rom that this bug is in because I tried a few different ones and the problem still occurred. It seems like the alarm will only turn on if you set it for the next day. If you set it two days from now then it won't show up as it being on.
Related
Under Sounds & Notifications, when one selects "Reminders", there is a tick box called "Repeat".
Presumably this means that when an alarm sounds, it should repeat until dismissed. Mine only plays once. Am I missing something?
bump
Hi there,
Mine's a XDA Exec, and it does repeat although it pauses for about a second or two first. Not nearly loud or persistent enough to be a really decent alarm clock though!
OK, so it seems that aeAlarmPlus is the way to go - looks for an alarm and then comes up afterwards to do a repeating/escalating thing of it's own. Works well.
hi there
ok if u talking about alarms then go to clocks & alamrs --- go to alarm tab then set the time whet ever u want to set then click on the "BELL" icon
there is the option to make it repeat and even u can chose the sound
HTH
Regards
Gugi
Yeah, I am using it too.
My problem is that I cant kill the alarm. It gets repeating and I am getting more and more mad. Or is this on purpose ? as I have to wake up and tick the box of with the stylus....
Anybody has the same problem?
el_god said:
Yeah, I am using it too.
My problem is that I cant kill the alarm. It gets repeating and I am getting more and more mad. Or is this on purpose ? as I have to wake up and tick the box of with the stylus....
Anybody has the same problem?
Click to expand...
Click to collapse
Playing with alarms may have been the reason why my calendar was not able any more to remind me.
When soft resetting even alarms of all kind made me mad.
I hard reset (horrible job with a lot of work to do) solved my problem, but I do not touch the alarm any more.
Hope your problem is different
Huib
i have the same problem. It goes off every time and repeats for a couple of times and I dont see any option to close/kill it.. good thing I still have te sense not to bang it against the wall like an alarm clock.
i guess if the built in alarm function is not working or it goes crazy, just use any other free alarm application. i know theres a lot of free application out there.
the phone will not stop alarming and it does not give me the option to turn off the alarm or even see the notification. I have tried a soft reset and also turning off all alarms, along with the notifications and sounds settings. If I turn all the sound settings down to zero the phone does not audibly alarm but it still vibrates, even though the vibrate feature is turned off. All started when I dropped my phone.
I cannot figure out how to fix this, and its driving me insane!!!!!!!!!!!!!!
IPL 1.08
SPL 1.08
GSM .1.09.10
OS 1.8.10.2
HTC WIZARD
T MOBILE MDA
I am having this same problem right now and it is very annoying. Any help would be greatly appreciated.
kelzud said:
the phone will not stop alarming and it does not give me the option to turn off the alarm or even see the notification. I have tried a soft reset and also turning off all alarms, along with the notifications and sounds settings. If I turn all the sound settings down to zero the phone does not audibly alarm but it still vibrates, even though the vibrate feature is turned off. All started when I dropped my phone.
I cannot figure out how to fix this, and its driving me insane!!!!!!!!!!!!!!
IPL 1.08
SPL 1.08
GSM .1.09.10
OS 1.8.10.2
HTC WIZARD
T MOBILE MDA
Click to expand...
Click to collapse
Its a notification problem - use check notification to delete duplicate notifications (only delete these not all of them) Click options/settiings and tick both boxes. There may be a null notification that is often a problem that you will need to click on and delete.
Run exe on pc desktop after activesync your device.
how do you get there
I cannot find the area that you are talking about. can you give a more detailed way of getting to that area with the names of the windows that I need to click on? Thanks,
Dave
Re: how do you get there
kelzud said:
I cannot find the area that you are talking about. can you give a more detailed way of getting to that area with the names of the windows that I need to click on? Thanks,
Dave
Click to expand...
Click to collapse
I assume the program is installed on your device. Click on check notifications icon in startmenu\programs. Click on options then settings and tick remove duplicate events box and remove script 0x000 box then ok. Then click clear and it should clear all duplicate notifications for you.
I actually had the exact same problem on my 9100. After a couple of days I simply went ahead and made a hard reset....and havent had the problem since
Jakob
I had this problem a couple of times as well. Clearing duplicate notifications (using CheckNotifications or MemMaid) and the offending notification does NOT solve the problem. It will stop the errant alarm, but the next time one of your regularly scheduled alarms goes off, you will have the exact same problem. It's as if there's some error in the program which is responsible for creating the little box with the alarm message in it and switching the left soft key ot a dismiss button.
So unless you plan on never again using your alarm clock or setting reminders for anything, jacking with the notifications will not solve the problem.
The only way I have been able to fix the problem is with a hard reset. I'm sure there has to be some other way, but I sure haven't found it yet.
Is there a cure for this or no? I just downloaded check notification and ill give it a shot, but so far it shows no duplicate alarms on my system which i find hard to believe...
Did you tick both boxes in the options and delete a notification called null - have to click and hold to delete it. The alarm notifications are under clock.exe - delete all manually if not showing up duplicates. (click and hold)
Don't use WM 5 alarms at all
I use ActiveKitten's Chronos Alarms - no worries at all!
I also had this problem and a hard reset was the only thing I could do. Afterwards I restored my backup and never had the problem before.
Hi ppl,
I have a big problem with alarm in my D2. If i set alarm and send D2 to stanby, alarm dont beep This is a big problem to me. I need safe batery, but i need alarm too...I try Klaxon, but i have with them the same problem. Can help me anyone? Can i set anythink to wakeup D2 when is in stanby?
thanks for answers
I know that it wont beep for text messages notifications are you using any roms if you are install advanced config and under power management set the battery usage to 10 minutes if not using a rom go to the htc website and download the sms fix
I using TD2 tools, i have sms tone fixed. But alarm is dead alltime
How i can change registry(must have any program ? ) Can i change any in registry how about change sms wake up from standby?
My ROM 1.39.479.1
Ropik said:
Hi ppl,
I have a big problem with alarm in my D2. If i set alarm and send D2 to stanby, alarm dont beep This is a big problem to me. I need safe batery, but i need alarm too...I try Klaxon, but i have with them the same problem. Can help me anyone? Can i set anythink to wakeup D2 when is in stanby?
thanks for answers
Click to expand...
Click to collapse
Have exact same problem, think there must be something related to the amount of time the phone has been in standby too, if I test an alarm, by setting it to go off in 10 mins for example, it works fine, left overnight, never works....
I had issues with the alarm after using Klaxxon and uninstalling it.
I am currently testing to try and get it working each time and seems to be ok.
I reinstalled Klaxxon ticked force remove windows alarms and intergrate applyed the changed and soft booted the phone.
I then started klaxxon again and remove both ticks and soft reset again.
I then used AlarmFixWM to remove duplicate entries from the notification queue.
Not 100% if this now works 100% but seems promising.
Im sure there is an easier way but the above its what I did.
Found this thread which seems to be related
http://forum.xda-developers.com/showthread.php?t=333521
Have installed SK tools, cleaned notification queue and set it to run cleanup auto in middle of night....
Alarm actually went off this morning...
Hardly conclusive, but gives me hope!
Odd, seems to be a longstanding WM2003/5/6/6.1 issue, not TD2 specific, but I moved to topaz from an artemis where I never had a single alarm problem... you would think if the artemis hardware could cope with my appointments list/alarms etc. then a topaz would be fine too...
P.
Alarm sounded again this morning
Happy Days...
Will post back here if problem reoccurs,
Otherwise, assume this has worked for me.
P.
Hey popkid,
Any chance you could post exactly how to do this using SK tools? I cant seem to figure it out and I have this annoying alarm problem!!!
Cheers
philaldred said:
Hey popkid,
Any chance you could post exactly how to do this using SK tools? I cant seem to figure it out and I have this annoying alarm problem!!!
Cheers
Click to expand...
Click to collapse
1) Fire up SK Tools
2) Hit Tools (Bottom Right) --> Settings
3) 2nd Tab "Automation"
4) Toggle "Notifications Queue" to "Use in Auto Mode" if it isn't already
(Take a look through other run options to run and deselect them if you don't want them running automatically)
5) Toggle "Scheduled Run" to "Yes"
6) Set time/day/date etc. to run (Mine is set to run at 3.30am every day, probably overkill!)
7) Set "Silent Mode" to "Yes"
and you are good to go
Alternatively, to fix your Notifications Queue just once:
1) Fire up SK Tools
2) Category (Bottom Left) --> Maintenance
3) Select "Notifications Queue"
4) Action (Bottom Left) --> Mark Duplicates (should be a fair few if you are having alarm problems)
5) Action (Bottom Left) --> Delete Marked
Hope this helps, post back if not!
Good Luck
Pauly
Thanks Pauly, ill see if G-alarm wakes me up in the morning!!
Dunno if you guys can help, i got Klaxon and alarm is fine, but if i snooze using shake then it never goes off again!
Can you show me your settings or give me any ideas?
My solution: Whatever alarm you have, install HTCPedia Topaz Setting Tool, go to Power Settings and set AC Resuming and Battery Resuming to 20 seconds, works EVERY DAY for me with Klaxxon.
That change made no difference when I was having my difficulties, think that gives the device longer to process your notifications queue if it is large, but if the notifications queue has other issues then it won't help.
P.
Edit: SFAIK Think G-Alarm changes both of these registry values to 120 seconds on installation, That is what they are set to on my TD2
they are located in HKLM\System\CurrentControlSet\Control\Power\Timeouts\ if you wish to edit directly,
"BattResumingSuspendTimeout" and "ACResumingSuspendTimeout"
But does that fix the snooze function?
adigraham said:
But does that fix the snooze function?
Click to expand...
Click to collapse
doesn't sound like the same problem you have to be honest, the notifications queue stuff is related to the alarm never going off in the first place...
I'm not a klaxon user, but have had it installed in the past, are you sure that you don't have the light sensor alarm deactivation switched on or it set to switch the alarm off (rather than snooze) on shake?
P.
Thanks for replying mate, how would i know about the light sensor bit?
popkid said:
doesn't sound like the same problem you have to be honest, the notifications queue stuff is related to the alarm never going off in the first place...
I'm not a klaxon user, but have had it installed in the past, are you sure that you don't have the light sensor alarm deactivation switched on or it set to switch the alarm off (rather than snooze) on shake?
P.
Click to expand...
Click to collapse
I thought there was an option in Klaxon itself to use the light sensor to deactivate the alarm when a light is switched on?
Ah... Ok... just checked Klaxon release docs and it seems that isn't implemented yet... so thats a red herring!
It does say though... flip phone over to snooze
and shake to deactivate
I'm guessing that whatever you are doing is triggering the deactivation rather than the snoozing....!
One way to check, if you enable the integration to TF3D in klaxon then the time noted for the next alarm on your front page should increment to the next alarm set once the alarm has been deactivated, but not if it is snoozed, I think anyway.
P.
hey, yeah sorry i turn it over! it used to work with stock rom i think .. do you know what each option does in klaxxon? might just try g-aram or something?
popkid said:
I thought there was an option in Klaxon itself to use the light sensor to deactivate the alarm when a light is switched on?
Ah... Ok... just checked Klaxon release docs and it seems that isn't implemented yet... so thats a red herring!
It does say though... flip phone over to snooze
and shake to deactivate
I'm guessing that whatever you are doing is triggering the deactivation rather than the snoozing....!
One way to check, if you enable the integration to TF3D in klaxon then the time noted for the next alarm on your front page should increment to the next alarm set once the alarm has been deactivated, but not if it is snoozed, I think anyway.
P.
Click to expand...
Click to collapse
No, sorry not sure, guess there is some sort of sensitivity set somewhere where it determines whether you are shaking or just turning over, I used to use the turn over function in klaxon when I had it and it worked fine... in G-alarm I get what you describe btw the sensitivity is set such that when I turn it over it thinks I'm shaking it and deactivates, so that may not provide the fix you are after either... and G_alarm isn't free... if you hunt around, I'm sure there was another klaxon thread on here (possibly by the developer himself) that had some details of the sensitivity being changed between releases, may be a reg edit you can do to fine tune it?
Good Luck!
P.
Ok thanks for your help fella!
What rom you running btw?
popkid said:
No, sorry not sure, guess there is some sort of sensitivity set somewhere where it determines whether you are shaking or just turning over, I used to use the turn over function in klaxon when I had it and it worked fine... in G-alarm I get what you describe btw the sensitivity is set such that when I turn it over it thinks I'm shaking it and deactivates, so that may not provide the fix you are after either... and G_alarm isn't free... if you hunt around, I'm sure there was another klaxon thread on here (possibly by the developer himself) that had some details of the sensitivity being changed between releases, may be a reg edit you can do to fine tune it?
Good Luck!
P.
Click to expand...
Click to collapse
My daily alarm plays ring only once. How I can make it to repeat itself for 20 minutes?
Thanks
Bump.
i don't believe that everyone here is sound sleeper. lol
there are several ongoing issues with the alarms.
tips to try to help get it working for you are...
use bsbtweaks to turn on "notification dismiss x time" (I forget the exact wording) to turn on proper windows snooze times.
set your alarms and alarm sounds using settings menu all settings clocks and alarms instead of the htcalarms screen.
in settings menu all settings sounds and notifications, in the dropdown find "reminders" and tick show message on screen.
hope these help some.
samsamuel said:
there are several ongoing issues with the alarms.
tips to try to help get it working for you are...
use bsbtweaks to turn on "notification dismiss x time" (I forget the exact wording) to turn on proper windows snooze times.
set your alarms and alarm sounds using settings menu all settings clocks and alarms instead of the htcalarms screen.
in settings menu all settings sounds and notifications, in the dropdown find "reminders" and tick show message on screen.
hope these help some.
Click to expand...
Click to collapse
Thanks, i'll try it
Klaxon
Klaxon works for me and it is free, I had the same problem with the stock alarm because I'm using S2U2.
Hi there, I can't seem to access the alarm setting screen, am I correct in saying you access is via touching the clock or alarm tab from the home screen?
This isn't bringing anything up, is there another way of accessing it, I can't find one.
Many thanks
Alarm
Hi, go into settings,menu,all settings,clocks & alarms, then touch on alarms at bottom,,,, Quig
Thank you! Am i right in saying i should be able to access it via the clock on the home tab and alarm tab on the home tab? If so I have something broken?
Yes,
I just get close to clock or the words alarm off, it pops up!! Somethings messed up. I'm not sure about any settings, none that I know of. I've got cookies home tab, & editor. Shouldn't matter..
sorry, a follow in question - how do i change the alarm sound, I can't find the option for the life of me...
settings menu all settings clocks and alarms tap the alarm you want to set and choose the sound there.
hi...
i got a different alarm question...
if my bluetooth headset is switched on...my alarm on my phone will not ring..
it will only ring in the headset..
i don't wear my heatset when i am sleeping...
anyway to set alarm to ring on phone instead?
thanks
jack
samsamuel said:
settings menu all settings clocks joe alarms tap the alarm you want to set and choose the sound there.
Click to expand...
Click to collapse
I never knew that! Many thanks, didn't realise the bell icon was tappable!