Since installing the Tmobile ROM, I have been unable to load new programs or get my device to synch at all. I get a connection error each time:
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
I don't have an SD card (yet), but I was trying to load a kitchen ROM, then tried installing phonext to see if I could get anything on there.
The T-Mobile ROMs have problems talking through ActiveSync. I have personally observed only that you can no longer use 'Programme A' to go to a new ROM, and that you need to use the bootloader/SD-card method instead, but maybe I've missed other things...
(Hmmmm, maybe they turned this silly admin policy thing on...)
Well, what would cause it to not want to synch or even install new programs?
As of today I can get it to synch with Outlook, however still no go on the rest. I will try the bootloader method tommorow at work.
Have you tried a complete reinstall of the latest release of activesync.
Hello,
After I upgraded my ROM. I am having problems using Active Sync. It won't detect the device when I connected the USB cable. I tried soft reset, hard reset, remove, reinstall active sync and reboot the PC, also used two different computers and it still doesn't work.
I also notice that my dialing keypad won't show up when i press the "call button". Comm Manager shows that my phone is off. Tried turning it on by tapping as well as holding the Comm button then tap..doesn't work either..
Please help! I am thinking of downgrading the ROM to 1.8 to see if the phone will work but i cannot get the Active Sync to work..
Need help from anyone. Thanks.
You need an Sd image of a rom. Im currently looking for one but nobody seems to want to share it.
Clem
sd image
Here is the link for the SD image by dutch
ftp://xda:[email protected]/Wizard/Roms/Qtek/sdcard_backup_wizard_tmob_dutch.zip
Thanks, so all I need to do is transfer that file to my SD and then open it while the SD is in my 8125?
Instruction to update rom via SD
Here is the link on instructions on flash miniSD
ftp://xda:[email protected]/Wizard/DumpROM/How_to_Create_MDA_Vario_Dumpfile.txt
Just an advice I'm not sure if this backup is made by dutch or has a dutch language for I have not tried it coz I want a ROM with 2.26. If you happen to be able to reflash to 2.26, can u please make an SD image of it?
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8
Just purchsed the Orange M3100 phone but I cant sync it on my pc. Ive downloaded Windows Mobile Device Center driver for Vista 64bit. It doesnt pick up my phone. Please help, ive googled etc.
Running WM 5.
In settings>connections>usb to pc, uncheck "advanced network functionality". That might work...
Cheers...
also make sure its pluged directly into your pc (one of the ports on the back) not though a usb hub, thats the prob i had syncing my 3100
thanks ultramag69. it seemed to work
now can i use FREE HTC HERMES UNLOCKER v3a by pof using vista?
the instructions talk about active sync and windows xp but no vista
sorry but ive only used this phone for few hours
you can use the sd card method as described in its readme.txt that comes with it
thats the problem I dont have a sdcard yet. Just thought the XP instructions may work using Vista and WMDC.
I believe you need to update to the latest version of WMDC through my reading but you may want to confirm that. If you do a search through the wiki using terms like "vista activesync hermes" you should get a hit as it has been extensively talked about. Also please make sure you check what radio rom you have as unlocking the hermes will downgrade the radio rom to 1.16.00.10. MAKE SURE YOU KNOW WHAT RADIO YOU HAVE SO YOU AN PUT IT BACK...
If you want to use the sd card method (I find it safer than from the pc) then you need an sd card 2 Gb or smaller as though the OS can read a higher card the bootloader (the software in the hermes used to flash) can't. Don't forget to Hard SPL your hermes after you unlock it, I didn't need to do this but you can check by putting a sim from another carrier into your hermes. However, Hard SPL is a MUST. You can get instructions from here - http://forum.xda-developers.com/showthread.php?t=296722
Sd card method on page 116, post 1160. It has all the apps needed to flash both through pc and sd card.
Then you're good to go for flashing a new os.Look into each os on your own, read the post and make up your own mind, DON'T ASK WHICH IS THE BEST..... There is no "best" for everyone, you need to choose on your own. As for the Radio Rom, I would suggest ONLY using the sd card method as if you flash this it the thing that is MOST likely to brick your device if something goes wrong. DON'T INTERRUPT THE FLASH FOR ANYTHING!!!!!
As stated the unlocking will change your radio rom.
Read carefully each step of the guides and don't skip anything and you'll be fine...
Welcome and happy flashing,
Cheers...
hi ultramag69. flashed the phone today and it worked fine. the only problem i have now is when trying to update to wm6 i just get the 4 colours screen and lose sync. same when trying to hard spl 2.1. any ideas?
Hey folks,
I can't get my unit so show up in my PC....i have installed activesync. The unit charges but thats about it.
Can anyone help me out here?..I would really appreciate any ideas...
thanks
it would be help for others to help you if you state what rom you have loaded original or cooked. If you have installed hardspl and then downloaded a cooked rom from here or somewhere else then you might have advanced networking selected in the rom to switch it off and allow active sync to recognise it simply click start > settings > connections > usb to pc and untick it.
If its an original rom then you will have to state what it is that you have installed also state what software you have loaded on to it ,as some software to play silly buggers with active sync
Hello!
i've got the same Problem as the Threadstarter...
Ive loaded the following ROM:
http://forum.xda-developers.com/showthread.php?t=458456
http://www.4shared.com/file/90040149/a7472809/GoldenGlobe_Black_GER_V10.html
(german version ;D)
now, i flashed successfully, (i believe without hardspl, as i wanted to flash hardspl it caused an error while flashing, so i tried without it.. (chosen Secure SPL in the flash-tool) )
After flash, the phone rebooted, and it didn't connect anymore -.-
the advanced networking also is switched off...
maybe i have to flash another one with the sd-card method...
xover§, talk about russian roulette...
Go to page 116, post 1160 of the Hard SPL thread in upgrading section. Instructions on how to install Hard SPL using the sd card method.
If you try to flash the Hermes without Hard SPL using the sd card method, be prepared for failure.....
Cheers...
As for active sync, have you upgraded your PC's .net framework to 3.5?
got vista.. no need for .net framework anymore xD, it's included... (and yes, the newest version..)
holy F**k...
this post (page 116, post 1160) is exact what i need xD thanks ...
[edit]
okay more people got the problem with the flash:
you can see it here:
http://forum.xda-developers.com/showthread.php?t=458456&page=121
hope there is a fix soon
[/edit]