Related
Since nobody gave me a good answer (i asked in samfirmware and other androidforums) and im not the only one having this problem, i decided to post in development section.
It seems that GT-I5800 black edition Teos users have a problem with the ROMS that come without the Sbl.bin, boot.bin and logo.png.... we cant flash ROMS that are missing these files, always get this error message.
--Appling Multi-CSC...
E:Can't mount /dev/block/st17 (Invalid argument)
E:main:Can't mount DATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
Click to expand...
Click to collapse
Ive looked inside every ROM .tar and i found out that JPF, JPM, and custom ROMS based on this stock roms are missing those files, and we cant flash those.
Inside JP8, JP9 and JPB those 3 files are included and i managed to flash all 3 of them, but we want to be able to flash a custom rom or update to JPM of XWJPD.
I need to know if its safe to add the 3 missing files inside JPM.tar and then flash it.
(I know you will tell me its not safe to flash with the boot files.. BUT.. we cant FLASH any ROM stock or custom that dont have those ROMS everytime i hit same error message (E: Cant Mount DATA
Please DO NOT answer if you're not 100% sure what are you talking about.
pflorin said:
Since nobody gave me a good answer (i asked in samfirmware and other androidforums) and im not the only one having this problem, i decided to post in development section.
It seems that GT-I5800 black edition Teos users have a problem with the ROMS that come without the Sbl.bin, boot.bin and logo.png.... we cant flash ROMS that are missing these files, always get this error message.
Ive looked inside every ROM .tar and i found out that JPF, JPM, and custom ROMS based on this stock roms are missing those files, and we cant flash those.
Inside JP8, JP9 and JPB those 3 files are included and i managed to flash all 3 of them, but we want to be able to flash a custom rom or update to JPM of XWJPD.
I need to know if its safe to add the 3 missing files inside JPM.tar and then flash it.
(I know you will tell me its not safe to flash with the boot files.. BUT.. we cant FLASH any ROM stock or custom that dont have those ROMS everytime i hit same error message (E: Cant Mount DATA
Please DO NOT answer if you're not 100% sure what are you talking about.
Click to expand...
Click to collapse
I dont know! But you should have read this before you post in dev!!!!! http://forum.xda-developers.com/showthread.php?t=857760
pflorin said:
Since nobody gave me a good answer (i asked in samfirmware and other androidforums) and im not the only one having this problem, i decided to post in development section.
It seems that GT-I5800 black edition Teos users have a problem with the ROMS that come without the Sbl.bin, boot.bin and logo.png.... we cant flash ROMS that are missing these files, always get this error message.
Ive looked inside every ROM .tar and i found out that JPF, JPM, and custom ROMS based on this stock roms are missing those files, and we cant flash those.
Inside JP8, JP9 and JPB those 3 files are included and i managed to flash all 3 of them, but we want to be able to flash a custom rom or update to JPM of XWJPD.
I need to know if its safe to add the 3 missing files inside JPM.tar and then flash it.
(I know you will tell me its not safe to flash with the boot files.. BUT.. we cant FLASH any ROM stock or custom that dont have those ROMS everytime i hit same error message (E: Cant Mount DATA
Please DO NOT answer if you're not 100% sure what are you talking about.
Click to expand...
Click to collapse
I have the exact same phone. No problems. Flash the entire Lestatious branch (not trying to get you to use it) and see if the problem remains.
And no. Never flash those files. It's just a horrid idea.
And this isn't even development!
sadly your question will be left "un solved" because i dont see any problem in what you say...maybe you need to learn how to flash...because you seems to confuse yourself in mixing up stuff...And posting in dev section was a bad idea...This will soon be closed..
Hope you learn how to flash with success in near future..
Happy Flashing in Advance
PeACE
im on jpb but i dont know how to flash, right !!!!!!!
did you ever tried to flash a teos i5800 black??
Sir,if you flash bootloader ,it may do harm to your phone.And Bl isnn't an necessary thing for flash.Use odin to flash those tar files is easy and fast without any problems.
Sent from my GT-I5800 using XDA Premium App
Maybe u should wipe cache&data partitions
Sent from my GT-I5800 using XDA Premium App
Alo try to remove sd card and sim ard, i had problems flashing if i had those cards inserted, firsto of all try to flash a stock firmware, like jpd or jpm, look in samfirmware for your you phone's location, if you can flash with no problems a stock firmware, try with a custom one
UPDATE: WOLF HAS RELEASED TW 007.2 THAT INCLUDES THE zKernel.
Thanks to that, the process is much more simpler now. Just flash the files as it says in the Wolf thread.
Mods, please close this. Thanks to all who used this and hopefully this helped you in 007.1
hey thanks for posting this...
i will link up to this from the kernel thread...
btw u should also mention this:
>>
if u have previously used the wifi patch wifi_bt_fix-fxk_froyo_v01.1.zip please remove it using remove_fix_v01.1.zip and try using this test kernel
<<
will do..can i plz have a link to the remove_fix_01.1.zip? Thanks
kantk20111 said:
will do..can i plz have a link to the remove_fix_01.1.zip? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1077437
Thanks...guide is updated
3.Go to settings-About phone. If, under kernel version, it says anything other than "2.6.29-zKernel-23062011 [email protected]#1", then you will have to do this.
Navigate to system/kernel using root explorer or similar app. DELETE boot.froyo.img, and RENAME boot.img to boot.froyo.img. Restart.
If it shows that kernel version, then skip this step.
Click to expand...
Click to collapse
Thanks a lot for this awesome guide. Im sure it will be very helpful to many users.
I followed ur guide to install custom kernel on WB TW007 with baseband .67.
But Im stuck on step 3. After flashing boot.img in Xrec I couldnt see custom kernel version in About Phone so I navigated to system/kernel using root explorer. There was only just one file named boot.img. So I renamed it to boot.froyo.img, rebooted but still get the stock kernel version in About Phone
Any kind of help will be greatly appreciated
digital_ism said:
Thanks a lot for this awesome guide. Im sure it will be very helpful to many users.
I followed ur guide to install custom kernel on WB TW007 with baseband .67.
But Im stuck on step 3. After flashing boot.img in Xrec I couldnt see custom kernel version in About Phone so I navigated to system/kernel using root explorer. There was only just one file named boot.img. So I renamed it to boot.froyo.img, rebooted but still get the stock kernel version in About Phone
Any kind of help will be greatly appreciated
Click to expand...
Click to collapse
hmm...I'm assuming that you have Stock kernel, right?
First, try re-flashing the boot.img file, but first wipe cache partition and wipe dalvik cache, then do the whole replacement an renaming. If that doesn't work, then try this:
(Thanks Haldi4803)
3. Restart Phone and enter X Recovery: Install first: "chargemon_FXRec_default_CUSTOM.zip" and then "bootloader_bypass_files_v2.zip"
Then, install the kernel on top of that while still in xRecovery. So, you would have installed all 3 files together . Please report back if it works so I can add this step in the OP.
^ Yes! Im on stock kernel. Sorry for not being clear.
Aiight. Im trying what u said right now and will report back.
EDIT: Nope. Nothing worked. Flashing all 3 files didnt work. On the other hand phone started lagging like hell after flashing. Its not responsive at all and Im constantly getting FC on System Process etc
Any thing else??
Hi everyone, dude, I tried follow u tutorial, but this didn't work (ok ok, I'm noob, i tried start this with Stock kernel...). Then I installed TW007.1 with Custom Kernel and didn't appears Custom kernel.. ok, i tried to install Z's custom kernel, following u tutorial and nothing again
What should I do?????
digital_ism said:
^ Yes! Im on stock kernel. Sorry for not being clear.
Aiight. Im trying what u said right now and will report back.
EDIT: Nope. Nothing worked. Flashing all 3 files didnt work. On the other hand phone started lagging like hell after flashing. Its not responsive at all and Im constantly getting FC on System Process etc
Any thing else??
Click to expand...
Click to collapse
u were most probably using xRecovery... flash FreeXperia recovery using FLASHTOOL and then try those files...
BTW if u use "chargemon_FXRec_default_CUSTOM.zip" then u dont need to do any renaming cause that files uses standard boot.img file name
cat /system/kernel/boot.img > /proc/splboot/boot_img
^ For some reason my Xrec is broken and I cant get into Xrec so I tried to install Rec thru Flashtool. It isnt working either
Insall Recovery option is disabled. I click on Ask Permissions, it says allow Superuseraccess on the phone but nothing happens on the phone. I cant do anything on the phone as it keeps FC Process System. It sometimes even doesnt detect USB conncetion
Is the SEUS repair the only option???
digital_ism said:
^ For some reason my Xrec is broken and I cant get into Xrec so I tried to install Rec thru Flashtool. It isnt working either
Insall Recovery option is disabled. I click on Ask Permissions, it says allow Superuseraccess on the phone but nothing happens on the phone. I cant do anything on the phone as it keeps FC Process System. It sometimes even doesnt detect USB conncetion
Is the SEUS repair the only option???
Click to expand...
Click to collapse
sadly, yes. I'm sorry about your phone, I wasn't sure if it would work with the stock kernel. another option could be to install the 3. 52 kernel first before following my instructions, or wait for wolf to officially release a kernel.
again, sorry about causing you to do a full repair
Na u dont need to be sorry. U were trying to help. I might've done something wrong or it was a bad day for me after all. Im repairing thru SEUS right now. Might give it another try in a day or two if WB doesnt officially release a Zkernel supported version of his rom.
But thanks once again for everything and keep up the good work
To those on the stock kernel,
Try to install the 3.51 kernel first, found here, then follow my instructions.
You won't get signal after installing the 3.51 kernel but that's ok, since it's meant for BB52 anyway. Your BB might become unknown as well.
That's what I do on a fresh install
Get baseband .67 first then
1) Fresh install TW007 stock kernel
2) Reboot and check for signal
2) Flash 007.1 update
3) Reboot
4) Flash transparent add-on (Optional)
5) Reboot
6) Flash zKernel_22062011.zip
9) Reboot and you will have the custom kernel but system keep on crashing and no signal
10) So I just reboot and flash this two files by DoomLord
Download link: (boot.img only)
http://www.mediafire.com/?vj9p2xy4p4w24ay
[VIMP NOTE FOR FROYO USERS who do not see any change in custom kernel after flashing the boot.img]
Download link: (wifi.ko module only)
http://www.mediafire.com/?lmh46quh490mzme
VERIFIED WIFI WORKS!
11) Signal is back and system doesn't crash
12) Reboot
13) Flash Contacts_ProSE _FIXED.zip & fb.zip
Thanks to them.
Everything is working. Use cpu master to overclock, it sometime give WLOD though
@gohwh1
u have linked to slightly older files...
i have posted updated kernel 23062011 based on FreeX10 ramdisk... which should work without any issue...
DooMLoRD said:
@gohwh1
u have linked to slightly older files...
i have posted updated kernel 23062011 based on FreeX10 ramdisk... which should work without any issue...
Click to expand...
Click to collapse
If that's working for me, I don't have to change right? Only problem is when overclocking to 1113mhz and playing games, it will WLOD when it's get too hot. Playing games for 3hrs non-stop and only one WLOD is normal right?
The updated kernel will not fix that right?
gohwh1 said:
If that's working for me, I don't have to change right? Only problem is when overclocking to 1113mhz and playing games, it will WLOD when it's get too hot. Playing games for 3hrs non-stop and only one WLOD is normal right?
The updated kernel will not fix that right?
Click to expand...
Click to collapse
thats wht it might!
please do try!
DooMLoRD said:
thats wht it might!
please do try!
Click to expand...
Click to collapse
Is it zKernel_freeX10_aZuZu_23062011.zip?
So I just have to flash it over current? Will flash it tommorrow, it's almost 3am here.
gohwh1 said:
Is it zKernel_freeX10_aZuZu_23062011.zip?
So I just have to flash it over current? Will flash it tommorrow, it's almost 3am here.
Click to expand...
Click to collapse
no this one:
zKernel_23062011 with FreeX10-beta4 ramdisk
http://forum.xda-developers.com/showthread.php?p=15170924#post15170924
This is for a clean install. You can also install straight from Froyo. Just start at the CM7 part below and skip the Odin portion.
FLASH AT YOUR OWN RISK
**If after you get on and are rocking the ICS of your dreams, you wake up one day and get the Encryption Unsuccessful - Reset Android - ICS Issue, see bottom of post for possible solution**
DO NOT HIT RESET repeat DO NOT HIT RESET
It is a bug that is hitting all ICS ROMS (AOSP-Passion, AOKP-Zen/Euphoria, Docmasters, CM9,...) on many different types of phones (Captivate, Vibrant, I-9000) and someone got hit with it in my OG Transformer Tablet (TF101) forums too.
You have been warned.
FLASH AT YOUR OWN RISK
I have made some observations as to how and why the Encryption Error strikes. See this thread starting at page 38 on (my post is #379 and after).
If running CM9 then this may be a work around before the issue strikes. I have not tried this and take no responsibilty if it works or not. Good Luck
USB mode switch for SGS1 on CM
Click to expand...
Click to collapse
What you need. All files can be found in the [Repository] Essential Hard To Find Files
Odin or (AIO ToolBox AND .net files) ***DO NOT PM me for this, I will just delete your PM and not respond. If you want ODIN, use Google and Download it. Sorry for this but my Dropbox account is suspensed b/c of too many downloads***
Gingerbread Bootloaders Go here for instructions.
CM7
Whatever ICS ROM you want to flash
These directions should work with any ICS ROM because the OPs and requirements (i.e. GB bootloaders, CM7 first,...) for all are essentially the same.
Click on Gingerbread Bootloader and ICS to take you to their respective threads.
**Note that this step (Installing Gingerbread Bootloaders) is reported to be optional as the Rainbows seemed to be fixed** Note: ICZenwich does REQUIRE Gingerbread bootloaders for CWM purposes.
If you want to use different Kernels (this is done after you flash the ICS ROM) on Neobuddy89's ICS Passion or Euphoria, Closedcircuit has them all in one place. Check out his thread here and make sure to thank him otherwise you might have to search for them on your own and we all know what a P.I.T.A. that is don't we?
.::IMPORTANT::.
Remember that you have to do this steps before and after update your kernel:
Wipe cache
Wipe dalvik cache
Flash kernel
Fix permissions
Click to expand...
Click to collapse
If for some reason your External_SD card (soon to be called EMMC after you get on ICS) does not mount. See here. Click the link within and flash it in CWR and you should be good to go
Click to expand...
Click to collapse
Standard Disclaimer Applies: This is your choice to do this, not mine. If something goes wrong, ask. If something goes horribly wrong, it is on you.
The video: This was done by DJeddieone and is very informative and helpful. Please watch it and hit his thanks. What follows is generally the same thing but with a few differences and in written form for all those people that need text instructions.
Watch this video, then read the below, watch the video again. Video has Froyo bootloaders and getting into recovery is different key combo, see GB thread below about that.
Just to make sure, I am going to start at the very beginning.
Flash back to stock 2.1 with Odin and the pit/pda files already included in the Toolbox. You should already know how to do this if you are flashing ICS. If not, then use the search to find out how.
Download and put Clockwork Recovery.zip on your internal SD card. Make sure it is labeled Update.zip and is the only .zip on the root of your SD card (should look like this /sdcard/update.zip). Can be directly downloaded from my signature or the Noob Guide stickied in the Q&A sections. Thanks s15274n
On your INTERNAL SDcard create a folder called ICS or something.
Download the CM7 file and put in the ICS folder (doesn't matter about the 911 issue b/c you aren't going to be using CM7 anyways)
Put the ICS ROM version that you already downloaded in the Folder also.
So let's start.
**Note that this step is reported to be optional as the Rainbows seemed to be fixed**
You need to open Odin and boot phone into download mode. Download the Gingerbread Bootloader and put it on your Desktop and in Odin, click on PDA and browse to the GB bootloader and click it. Your option but I do not tick the Auto-Reboot just in case of a bad flash. Once it passed, you are good. Unplug and reboot.
To start the flashing process, you should have 2.1 (stock-Eclair) on your phone as per above directions
Once it is fully booted, turn it off.
Push the Volume-Down + Power until you see the Vibrant come up and let go of the Power but keep ahold of the Volume-Down button. This will boot you into recovery. (If you are on Froyo Bootloaders, then it is Volume Up AND Down + Power) Can be tricky, so try it a couple of times if it doesn't work the first try.
Tab down to Reinstall Packages and click it. Let it run. If it gets back to the Blue Recovery, you might have to do it again. This will install the CWR that you put on your internal SD that you downloaded from my signature earlier. The recovery will go from Blue (stock) to Green (CWR).
Wipe Data/ Factory Reset, Wipe Cache and go to advanced and Wipe Dalvik-Cache, go to "Mounts and Storage" and format /system (if flashing Euphoria you'll need to format /data too), hit Back twice to front page of CWR.
***See Bottom why you need to flash CM7 before.***Also, if coming from a Voodoo Kernel based 2.2 or higher ROM-Disable it before flashing CM7.***
Scroll down to "Install from SD Card" and scroll down to your ICS folder. Find your CM7 file and hit it. Once it finishes, reboot. It will probably bootloop. This is normal. Pull your battery and boot into (turquoise [or red or green]) recovery again, "Install from SD" and reflash CM7.
Once it finishes, reboot. First boot takes longer than normal because it has to build the Dalvik-Cache. It should boot up this time. Let it fully boot up and settle for a minute or two. Hit power on the side and reboot into recovery directly from the Extended Power Menu.
**There is a point in the flashing of CM7 where you will think that the install either aborted or is finished. IT IS NOT DONE. Let is sit and completley boot up. Don't get trigger happy. You will see a toast to install your Google password. Then is when it is fully booted.**
Once you are in recovery, scroll down to your folder and find the ICSv? (or whatever version you are wanting to flash) and flash it. First boot takes a long time just like before on CM7. Might also get into a bootloop like in CM7 too. If so, then do the same as before and reflash ICSv?, but this time you'll have to use the Volume-Down + Power (or if on Froyo Bootloaders the above key combo) to get into recovery. Boot up and you are good to go in you new ICS rom.
**IMPORTANT**
Why do I need to flash CM7 before ICS? Can't i just go from Eclair to ICS? i have seen some people do it this way and it worked for them.
ICS kernels and working recoveries use a MTD based /system (hence the flash to CM7, as CM7 will convert your /system properly) and Eclair/Froyo are either RFS or Ext4 (voodoo). It also converts your Externa_SD into the EMMC partition.
If you get the RANDOM OFFSET error.
Don't freak out. This is an ICS security feature (as posted in Passion's FAQ post). All you have to do is pull your battery and boot back into recovery and reflash ICS over itself (just like you did with the initial CM7 bootloop) and it should push through. You may need to do this multiple times. I have read of people having to do it up to 5x. YMMV though.
If you get the Encryption Unsuccessful - Reset Android - ICS Issue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go here in the Captivate Forums.
******************
Couple of things.
Once you are in ICS
*your external sd is now called EMMC
*the GPS is sketchy (although there are new kernels that are reporting this issue fixed-see your respective ICS thread)
* there are some Deep Sleep issues
* when you RECEIVE a call, you will have to hit mute/unmute for them to hear you. (this seems to have been cleared up now)
These are all known bugs and if you ask about them in the thread, you'll get flamed for sure.
Good luck. The whole process should only take a hour or so and most of that is just finding the files and watching the video. Actual flashing should only take 10-20 minutes.
Hit the thanks. Pretty much gave everything needed to flash from 2.1 to 4.0.3
A computer lets you make more mistakes faster than any invention in human history – with the possible exceptions of handguns and tequila. ~Mitch Ratcliffe
Change log:
4/17/12 - I have made some observations as to how and why the Encryption Error strikes. See this thread starting at page 38 on (my post is #379 and after). Put in link to Play.Store for USB mode switch for SGS1 on CM and tag at top of guide re: its use.
4/2/12 - Emphasized the Encryption Bug to make it more visible and warning of hazards.
3/30/12 - Put in section at Top and Bottom about the Encryption Unsuccessful - Reset Android - ICS Issue and a link to the solution/workaround to the Captivate thread.
3/12/12 - Bolded AND in the kernel instructions re: wiping before AND after kernel flash. Put in something about waiting for CM7 to fully boot up and that it may seem like it is aborting or done, however it isn't and you need to wait for a complete boot. Don't jump the gun on this and pre-maturely pull out. This is called CyanogenMod-us Interruptus.
3/8/12 - Explained why you need to flash CM7 before ICS. Put in link to fix External Mounting issue.
2/22/12 - Put in blurb about PMing me for AIO Toolbox and made the Toolbox Secondary to Odin
Included Closedciruit's thread with the ICS Passion and Euphoria Kernels.
Put in blurb about RANDOM OFFSET error and how to fix/bypass it.
2/18/12 - Took out Dropbox links because my account got suspended for TOO MUCH TRAFFIC. You are on your own for those right now until I find another solution. I am not going to register for another file sharing site.
2/15/12 - Put Dropbox links in OP with Froyo and Gingerbread Bootloader. Revised to make this all ICS ROM compatible since the OPs and per-requisites are essentially the same.
2/12/12 - Now AIO Toolbox, .Net and CM7 have direct download links since MultiUpload is down
1/15/12 - Revised to show that you can come from 2.1 OR 2.2
Yea, rainbows are fixed. If you don't flash a gb bootloader you wont see the kernal boot image. That's the only known issue. So its not really needed
Thanks for the nod, good job man.
I'm glad you put the AIO toolbox there. It seems no one knows how valuable that little program is.
thanks woodrube for the simple guide. the video from djeddieone seems to be fairly simple also.
i heard that if odin was used to go back to stock eclair to never use kies mini for a future update or else it would hard brick the phone. I've never odined back to stock however tempting to install cm7 i fell victim to a bootloop so i freaked out and odined back to froyo kb5. the question is now, if i used odin to go back to froyo would it be the same outcome as using odin to stock eclair when tempting to update with kies mini?
the reason why i ask is, i had given up flashing a custom rom, hoping for a stock update. but if thats not possible anymore i will go ahead and flash ics.
i tried my best searching. if i'm asking in the wrong place please redirect me. thanks and be patient with the noob.
lazynoob said:
thanks woodrube for the simple guide. the video from djeddieone seems to be fairly simple also.
i heard that if odin was used to go back to stock eclair to never use kies mini for a future update or else it would hard brick the phone. I've never odined back to stock however tempting to install cm7 i fell victim to a bootloop so i freaked out and odined back to froyo kb5. the question is now, if i used odin to go back to froyo and not eclair would it be the same outcome as using odin to stock eclair when tempting to update with kies mini?
the reason why i ask is, i had given up flashing a custom rom, hoping for a stock update. but if thats not possible anymore i will go ahead and flash ics. thanks and be patient with the nood. i tried my best searching.
Click to expand...
Click to collapse
Couple of things. First DO NOT USE KIES. Kies will hardbrick you device. Not sure why anyone still uses this but don't. Second, you bootlooped in CM7 b/c of an CWR mismatch. This is normal for CM7. What you would want to do it pull the battery and reboot into recovery and reflash CM7, essentially over-top of itself. It should boot up the second time.
Don't give up on flashing custom ROMs. Once you do it, you will love all the cool things that you never knew you could do. Follow my instructions above and you can essentially flash whatever ROM you want from 2.1.
yea figured it out watching some youtube clips. should have reflashed. so what you are trying to say is kies mini in general is dangerous? i have used it sveral times to update when on stock. mine and my wife's vibrant.
last question, if the impossible happens and vibrant gets a stable stock update, will i be able to just odin to stock eclair and update? if not with kies maybe using odin?
thanks for your help. hoping to help those like me in the future. can't wait to start flashing.
lazynoob said:
so what you are trying to say is kies mini in general is dangerous? i have used it sveral times to update when on stock. mine and my wife's vibrant.
last question, if the impossible happens and vibrant gets a stable stock update, will i be able to just odin to stock eclair and update? if not with kies maybe using odin?
Click to expand...
Click to collapse
Kies is bad. Really surprised you haven't bricked it yet. Stick with Odin to do your fresh flash. The Vibrant is not going to get an update, so don't count on that (see the petition in my signature if you want that to change). Fortunately we have an outstanding development community.
If you want a stable 2.2 try Toxic8 (I run this with Gingerbread theme as my "home" ROM when I am not testing), Deranged9, Bionix (no longer supported) and Bionix Fishman's version (this is supported), Bi-winning. All you have to do to flash these is follow the instructions above and when it comes time to flashCM7, skip it and flash the ROM of your choice. All of these have working GPS and 911, so no issues there. Any GB ROM (CM7 included) will not have functioning 911, just an fyi.
Bump (sort of b/c I updated some things on the OP)
Reserved. Good guide here. Thanks for the effort for those who are not so familiar with flashing like me. Gonna flash ICS when i get my Vibrant back. Thanks buddy.
multiupload seems to be done, does anyone have another link or can they send me AIO Toolbox?
Quikster said:
multiupload seems to be done, does anyone have another link or can they send me AIO Toolbox?
Click to expand...
Click to collapse
help? does anyone have this file or another link? PM me
outstanding development community.
I will upload a version of Toolbox and the generic CM7 build sometime tomorrow since multiupload is apparently down.
Woodrube said:
I will upload a version of Toolbox and the generic CM7 build sometime tomorrow since multiupload is apparently down.
Click to expand...
Click to collapse
awesome, i greatly appreciate that
OP updated with Dropbox links to AIO Toolbox, .Net add-on and CM7 7.1 ROM.
Thanks for the Guide, works perfectly. Now im enjoying ICS Passion v13 RC1.
I was in TeamToxic-D9RC3 rom. This is what i did:
- I started from CM7 part.
- Reboot into Recovery
- Wipe Data/ Factory Reset, Wipe Cache and go to advanced and Wipe Dalvik-Cache.
- Locate ICS folder-Install CM7.
- After boot into CM7-reboot into Recovery again.
- Install ICS Passion RC1.
- After finish installation, wait bout 5mins.
- Reboot into Recovery again, flash cleanup patch then reboot.
- That's it.
Thanks to:-
-Neobuddy
-Nelson for the Kernel
-Romanbb for source hack to enable FB sync
-Daniel for the Bootsplash and other graphical enhancements
-CM9/Teamhacksung for the drivers
-Annex for cosmetic upgrades which are really better than Stock ICS AOSP.
psycho for Mods
-Woodrube
Woodrube said:
I will upload a version of Toolbox and the generic CM7 build sometime tomorrow since multiupload is apparently down.
Click to expand...
Click to collapse
Thank you very much
Woodrube ... thanks for the nice tutorial. Couple questions re. the GB Bootloaders.
Woodrube said:
**Note that this step is reported to be optional as the Rainbows seemed to be fixed**
Click to expand...
Click to collapse
When you say "Rainbows seemed to be fixed" ... does this mean:
a) GB Bootloaders are still REQUIRED - ie. it's the GB Bootloaders that "fix" the rainbows?
b) Or ... GB Bootloaders NOT required - ie. some type of fix has now been incorporated into the ICS ROM packages?
Sorry for asking for noobish clarification, but I wanted to avoid any possibility of turning my phone into a paper weight.
Woodrube said:
Your option but I do not tick the Auot-Reboot just in case of a bad flash.
Click to expand...
Click to collapse
This is a great suggestion. Thanks for the tip.
Woodrube said:
Gingerbread Bootloaders
Click to expand...
Click to collapse
adyscorpius' link for his modified JFD ODIN file is down (ie. Multiupload is down). Wondering if anyone has this particular file or a fresh link to download it? It'd be nice to not have to worry about whether a JFD package has the proper boot.bin / sbl.bin combo or not.
Hi Everyone
Got myself in a bit of a situation, Went to install the latest Helly Bean Rom Downloaded the file with the big button and put it on my external sd card, followed the step by step untill...
Install instructions:
coming from any other rom:
- make sure to have gingerbread bootloaders
- wipe data/factory reset
- flash allinone.zip
- reboot recovery
- flash allinone.zip again
- flash Helly_Bean_AddOn or Helly_Bean inverted AddOn ......here when i realized i hadn't got the file furthermore the file i have is named
helly_bean_initial.zip I couldn't find the other file and now my phone just bootloops.
Please give help me get the phone working again I don't know what to do and im panicking.
I9000NB said:
I couldn't find the other file and now my phone just bootloops.
Please give help me get the phone working again I don't know what to do and im panicking.
Click to expand...
Click to collapse
Download the files needed to your PC, than use CWM to copy them to your Phone in USB mounts and Storage , after that flash
xsenman said:
Download the files needed to your PC, than use CWM to copy them to your Phone in USB mounts and Storage , after that flash
Click to expand...
Click to collapse
Thankyou xsenman that sounds simple enough,:fingers-crossed:
Well that worked great its now installed and the new rom looks sweet.
Problem i have now is im getting "An invalid IMEI number could cause network issues including the inability to call" anyone seen this before ?
Just found this :
Everyone is having IMEI problems, here is how you fix it.
1) Get ES file explorer or root explorer
2)Look in sdcard/backup/efs
3)Copy nv_data.bin, nv_data.bin.md5 and nv.log to /efs.
4) Reboot and enjoy!
Ill post back after gym if it works =D
That should work. Actually a friend of mine had similar issue with his phone but from what I know this solution helped him to get rid of the problem
Typed with my I9001
tryed the above fix with astro manager from recovery and after file copy and reboot i still get imei error.
thanks for the post ruthlessrat, its good to know someone else has tried the above fix and its worked for them maybe others who stuble across this thread may be able to use it although i can confirm it did not work for me.
I'm assuming my nv_data.bin, nv_data.bin.md5 and nv.log were bad, I'm looking into a imei fix here
http://forum.xda-developers.com/showthread.php?t=881162 Hopefully this will resolve the last issue.
Edit: Good news I've got another phone to cover me for a while so I can work on getting this phone set up
how i want it, I think i may need to return to a stock rom, will this restore the imei ?
Edit2 : Reinstalled Gapps from thread : http://forum.xda-developers.com/showthread.php?t=1796675 this time its worked and Google play is now working fully so ive installed titanium backup and a few other applications that may come in use.
In the meantime alternate imei fixes and any advice would be useful on other cool features / functionality unique to JB. Thankyou to everyone again without the assistance it would have taken me allot further to get to this point.
I9000NB said:
In the meantime alternate imei fixes and any advice would be useful
Click to expand...
Click to collapse
Need a Solution, My Android Solutions
xsenman said:
Need a Solution, My Android Solutions
Click to expand...
Click to collapse
Funny you should suggest that ive come across your thread, thanked, rated 5 and believe it should be newsworthy that thread could turn into a real noob's guide, I like it very much. I tried the first suggestion of copying the files , afraid it didn't work.
Second to that i tried this :http://www.youtube.com/watch?feature=player_embedded&v=JqLK_2I-SBM
but unfortunately my nv_data.bin is pure "FF" in the hex editor so I assume this is some kind of default setting? anyone know ?
I am now going to try..
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
I'm going to use GB 2.3.6 from sammobile.com
Can anyone recommend an ICS rom ?
following this I will flash Helly Bean latest nightly again.
Edit: Well Ive flashed back to 2.3.6 JVU & used the JVU CF - Root which works great, Ive backed up my rom and ets folder ready for jellybean the problem is when running through the installation ui it gets stuck on the final " Helly Bean installed" screen after making your software selections,
When I click next to finish it just hangs and the phone becomes completely unresponsive. at this point Ive removed battery and restarted but alas I'm still on cf rooted gingerbread. I don't understand why as it worked fine before.
Ive tried clearing both cache's and reset, this made no difference.
Ive also reinstalled stock rom, re flashed CF-Root & Tried again with no success.
I'm going to look into ICS roms and post back.
I9000NB said:
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
Click to expand...
Click to collapse
try CM 9 first than on to JB or HB or any other Bean
xsenman said:
try CM 9 first than on to JB or HB or any other Bean
Click to expand...
Click to collapse
Okay been having a few issues installing CM 9 so i have installed CM 7 for the moment,
Trying to fix CM9 atm keep getting "installation aborted (Bad)"
Fixed/Update : Move files to internal storage, Installed latest CM9, Downloading CM10 Nightly
Update 2 : CM10 Nightly installed works great & GAPPS latest version from goo.im.
Thanks again xsenman without you this would have been allot longer process, I really appreciate it !
Thread End.
Hi folks, I'm having some problems with my wife's phone, the more I try, I can not install any custom rom on it, whenever I try to install by the SDcard the same message appears ...
impossible to record and aborts the installation.
I learned to install the stock rom by Odin without major problems, but the bootloader remains locked, someone could help me in this case?
:laugh::laugh::laugh:
RAHahn said:
Hi folks, I'm having some problems with my wife's phone, the more I try, I can not install any custom rom on it, whenever I try to install by the SDcard the same message appears ...
impossible to record and aborts the installation.
I learned to install the stock rom by Odin without major problems, but the bootloader remains locked, someone could help me in this case?
:laugh::laugh::laugh:
Click to expand...
Click to collapse
Is that in recovery it shows up: E:Error mount sdcard and E:No such file or directory?
If yes, you can copy all your sdcard data and format your sdcard via your sgy...
And last, wrong section!!!
This Should be on the Q&A Section..
Sent from my GT-S5360 using xda app-developers app
RAHahn said:
Hi folks, I'm having some problems with my wife's phone, the more I try, I can not install any custom rom on it, whenever I try to install by the SDcard the same message appears ...
impossible to record and aborts the installation.
I learned to install the stock rom by Odin without major problems, but the bootloader remains locked, someone could help me in this case?
:laugh::laugh::laugh:
Click to expand...
Click to collapse
you dont unlock the bootloader - this is not a HTC phone!
follow my instruction on how to flash via odin and download the firmware from my thread at the top of the 5360 dev section or clicking the link in my sig then clicking the link for the stock firmware
The sd card error in cwm has already been answered in this thread - you need to correctly format the sd card
also questions go in the Q & A section NOT General section
JCVillegas78 said:
This Should be on the Q&A Section..
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
to have a lot of response,it should really be in Q&A Section
Thank's
marcussmith2626 said:
you dont unlock the bootloader - this is not a HTC phone!
follow my instruction on how to flash via odin and download the firmware from my thread at the top of the 5360 dev section or clicking the link in my sig then clicking the link for the stock firmware
The sd card error in cwm has already been answered in this thread - you need to correctly format the sd card
also questions go in the Q & A section NOT General section
Click to expand...
Click to collapse
Thank you! I managed to solve the problem by changing the Kernel gadget by Odin. And the other problem was indeed on the SD card, changed and worked perfectly!
The problem now is that I install the ROM but nothing changes ...
the gadget makes the installation process, but after restart remains the same. Would help me?
RAHahn said:
Thank you! I managed to solve the problem by changing the Kernel gadget by Odin. And the other problem was indeed on the SD card, changed and worked perfectly!
The problem now is that I install the ROM but nothing changes ...
the gadget makes the installation process, but after restart remains the same. Would help me?
Click to expand...
Click to collapse
if you are installing a rom in cwm make sure you mount system else you can flash roms all day long nothing will change
RAHahn said:
Thank you! I managed to solve the problem by changing the Kernel gadget by Odin. And the other problem was indeed on the SD card, changed and worked perfectly!
The problem now is that I install the ROM but nothing changes ...
the gadget makes the installation process, but after restart remains the same. Would help me?
Click to expand...
Click to collapse
Make sure that you already mount everything before install the rom