Database Users

Urgent Problem, Blue Angel Freezes

I upgraded my Blueangel to windows mobile 6 a couple of days ago, yesterday i was reset it. when it powered on i have the windows mobile 6 screen and nothings happens thereafter, it is not connection to activesync and i m not able to ROM Upgrade.
Please help me ASAP

read the wiki carefully
try a hard reset after and do the no+yes+yes ritual in the hard reset.. it should worked...
regards
adri

baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin

I had it after installing VBAR... you have to reset it and press the record and camera button, then clear the registry HIVE and press the mail button... it will be hard resetted but in wm6 you don't lose any data, just some settings and cabs...

Yeah, I got this problem too a few days ago.. annoying...
When I tried to back up my data using Sunnysoft backup manager, BA had to restart, and then it stuck in the WM6 page... ended up clearing the whole thing again using the no yes yes option...BA was able to start up on safe mode though... weird
I only had this problem once though....
Hmmm, interesting few people have this problems with different circumstances, however leading to the same problem...
is it really WM6 issue or is it 3rd party apps issue?

joseph.sapri said:
is it really WM6 issue or is it 3rd party apps issue?
Click to expand...
Click to collapse
good question!
it just happened to me as well.... i had an almost fresh install of WM2006 (just downgraded, merged Extrom and upgraded again).
I installed some few cabs and eventhough it worked fine for a day, it then started to freeze while booting again and again....
i never had the problem before merging the rom though...

it happened to me also, after doing a soft reset using pbar. it ends up in the green screen with the microsoft logo without going any further. i've tried several soft resets after but it always ends up in that mode.
had to perform a hard reset and install my favorite apps again.

well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all

xplode said:
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
Click to expand...
Click to collapse
have you installed all cabs you posted (cabs & cabs2)?
in what order?
whats Sprite Backup?
and which one is the HTC Home 1.5? (i only see HTC Home6?!?)
sorry, but i am really getting more and more confused...
regards,krz

Sprite backup is the best backup softweare IMO, yes all cabs (cabs and cabs2) Home6 is HTC Home 1.5

thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz

KRZTF said:
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
Click to expand...
Click to collapse
Use Home6 if you want to be able to modify the HTC Home tabs from 6 (default) to less than 6..... this is the only one working....
With Helmi_HTCHome6.. it also works, but cannot modify the tabs......
never tried the other one....

OK OK I had this problem and it solved it without losing data. First i tried to reset the device , like 30 times with no success. Even with a hard reset it didnt work. So you just Put ur device in the booloader mode and then soft reset it and voila. i dont know if it's really the correct solution but it worked for me for 3 times when i had that dumb WM6 screen. It's because of Battery status software ( 100% sure )

BA Freezing
xplode said:
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
Click to expand...
Click to collapse
Can anyone tell us which third parties programs that cause the freezing or which are compatible whit WM6. To used or avoid them.

Hi,
same problem here. I just installed the cabs from helmi (Thanks again!), the HTC Home (Helmi_HtcHome6_WM5_comp_sdkcert.cab), Acrobat reader and powerpoint (out of this cabs in the first message in the central BA6 Thread) and no additional software. I've re-installed it two times, but that doesn't help .
@ Xeon: Maybe a good work-around, I will give him a try,
UPDATE: @ XEON: Doesn't work for me
regards
Andreas

OK im again facing the same problem it seems my solution didnt work. As far as it seems to, i had to soft/hard reset more than 20 times to solve it. i dont get it. when i reset it the problem is still bla bla bla.. but when u leave it stuck for 10 mins and then reset it , it will work. the point is that after all , u dont need to format/clear registry. All u need is to keep trying. WEIRD [email protected]#[email protected]$#$

I keep having the problem after installing a new cab with a soft reset. The only way to get out of the WM6 screen is to go into bootloader and a soft reset. Just like Xeon said. However, I don't think it is the battery issue because if I just do a normal soft reset, it starts up fine. The problem arrives only when a soft reset is required to finish an installation from cab.

remove program problem from mogul

damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution

I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org

I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck

I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help

There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....

Me too.
I just hard reset. After reading everywhere, this was the only option.

i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.

saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.

JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks

No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!

TouchFlo 3D crash

Hi, please help me when I am scrolling in the TouchFlo 3D than the TF3D everytime restart. It is in all tabs. Just when I scroll the application crash and started again and it is so next time and next time. I made 3 hard resets and every time when I connect Touch HD to the PC over the ActiveSync and install the applications, the TouchFlo 3D make it again. I install only the Total Commander, copy the fonts and that´s all.
I have read the topics that when they go to the pictures or music the app will crash and they solved the problem but by me it is in all tabs !!! I have try it and haven´t helped me...
Sorry for me English but please be anxious to understand me.

After a hard reset you don't have the problem until you install Total Commander? If that is the only thing installed then that must be the problem, re-download it and start from a hard reset again.

Kangburra said:
After a hard reset you don't have the problem until you install Total Commander? If that is the only thing installed then that must be the problem, re-download it and start from a hard reset again.
Click to expand...
Click to collapse
I have installed most of application and yet is no problem. But I´m afraid the Touch HD connect over the ActiveSync. Also I will install my applications only from memory card. And yes I haven´t installed the Total Commander. This can be the problem. I will try it and write again if it will be all right. I will install also the newest TC. Thanks
EDIT: Ok I have installed the newest Total Commander (but not over the ActiveSync) and is all ok. I will not install the apps over the ActiveSync. I think that this was a problem.
EDIT2: Please can you tell me how can I extract from the ActiveSync application the *.cab file?
EDIT3: Uff I had synchrosed my contacts I was so afraid. I think that is problem only by installation of applications... but what I must do when it will crash again? I must make hard reset? it is waste of most time to install all again.

Help Installing CAB Files on Treo Pro

Everytime I download a CAB file and try to install on my Treo Pro I get an error message stating that runtime isn't installed. I tried finding runtime on my device but had no luck...any help would be appreciated.

Hate to offer the obvious, but have you done a hard reset? which cabs specifically aren't working? Are you installing them onto your device, or a memory card?

I have one a hard reset...no luck
Onto the device, not the mem card as I don't have one installed.
I can't get any cabs to install. I am trying to install Skyfire and/or Opera Mobile

How did you perform a hard reset?
Soft reset the Red button + DPad up?

Yep.
Removed bat door, used soft reset while holding red button...waited for the "erase all items" or whatever it says and then went through the process.
I know there is a ROM update out so I wonder if that will fix this. It's obviously something JAVA related that i can't seem to figure out.

Rom update? For the Treo Pro? Do you have a link for that?

I got it from a buddy who is a tech for Sprint.

T850eww-1.05-spt

All CABs I Try Cannot Be Installed

Anyone know the reason for this problem?
I'm trying to install .cab files on my HD2 and none of them are working....
Have tried Microsoft .NET Framework 3.5, Co0kie's home tab 1.7 and CHTEditor 1.7
This started happening after I uninstalled Co0kie's home tab 1.5 so that I could install the latest verison.
Thanks in advance

I take it you're running the cabs from your mobile phone
is there an error message?
it could be that uninstalling CHT it left behind/deleted/corrupted some manila files and is having this effect
a hard reset would most likely fix this issue.

Just saying "xxxxx was not installed succesfully" for every .cab I try.
Have no idea how to fix it...

omershahab said:
Just saying "xxxxx was not installed succesfully" for every .cab I try.
Have no idea how to fix it...
Click to expand...
Click to collapse
Mine does that sometimes, but when I soft reset, it works fine. I'm sure you tried this already, but just wanted to let you know your not alone..

Yeah thanks for the response man, I have tried to keep soft resetting and restarting.
Might just end up upgrading my ROM since I've been planning on for a while.

i had this happen from time to time as well when i was installing stuff. i always just hard reset to clear it since its just a weird problem and difficult to troubleshoot
not a great solution

Everytime I had this error it was a corrupted cab file, often happening when downloading them with opera mobile on the phone.