Related
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
search for TYTN + TCPMP on this forum... this has been discussed A LOT.
pergolesi said:
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
Click to expand...
Click to collapse
Hi there & welcome to our videoplayback problem:
http://forum.xda-developers.com/viewtopic.php?p=354421#354421
It's not all bad, but I can't find any workaround for the meantime. Look out for The CorePlayer (The new TCPMP), hopefully when released, it will address these issues we have discovered. Meantime I am using 'ImToo_DVD 2 Ipod Converter' , which converts to high quality Mp4 format and plays back just fine for now and is definately on par with Divx/Xvid AVI encoding at 768kbps! It also converts a whole film in practically 20 mins plus compared to PocketDivx_Encoder or DVDx.
I have tried the Im too to ipod converter, and have had some very pleasing results.
Could you possibly let me know what settings you have checked/unchecked in TCPMP, for optimum playback of the resulting mp4 files?
Thank you very much, your help and advice is greatly appreciated.
Best regards
Pergolesi
yeah I had a good experience converting to mpeg4 except the filesize was much larger (almost twice the size as divx) is this the norm cause of divx compression?
MPEG4 Videos in TCPMP
Personally, I use the following settings for ImTOO DVD to iPod Converter:
Video Bit rate:512 or 768 (difference is negligable but size is better @ 512kbps)
Audio Bit Rate:64
Sample rate:22050
Channels:2
Video Size:320x240
Profile: iPod MPEG-4 Movie (*.mp4)
Zoom:Full (keep aspect ratio)
Split:Infinite (though it's nice to have a DVD encoded in the chapters it came in - TCPMP will play them in the correct order if saved as 'playlist')
**Do Check the Audio settings (under the Menu bar) as your DVD will probably have options for differnt Audio i.e English.
I know more settings are available, but this is a short-term fix for me (with acceptable results for me) until the new 'CorePlayer' is released.
In TCPMP the settings really don't make much of a difference either, but just make sure you have 'Video' set to 'Rawframebuffer' mode. I have found that all AVI and MP4 playback without major gripes, but the MP4 gets better results whilst benchmarking using 'ATI decoder'. Fat load of good that does you when it comes to playback though (back to rawframebuffer mode).
P.S. for smaller filesizes, just reduce the video bit rate like you would in AVI encoding.
MPEG4 Videos in TCPMP
Great info, I'm sure others will find this just as helpful as I have.
Thanks again.
Pergolesi
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
ruirocha said:
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
Click to expand...
Click to collapse
I use Rawframeuffer mode, but GDI will do also. Though benchmarking yields better results in Rawframebuffer mode for me.
I'm using TCPMP. I set ATI IMAGEON Decoder on.
When it start, the screen is not viewable.
But I press the action button, when the movie plays it is normal.
When I paused and resume, video play with low frame rate.
I goto Option, Speed, Select 100%, it's normal.
What encoder should I use to encode videos for the diamond so that it uses the built in mp4 codec?
I tried SUPER software to encode but the videos don't show up in the album and won't play in WMP. I have TCPMP but when a camera perspective changes it becomes choppy. Does Core Player 1.2.5 have the same effect with VGA videos?
anyone? pleas at least tell me your experience with core player?
you are missing the second codec you suggested. typo maybe? thanks anyway your two cents helps a lot.
bugmenot said:
What encoder should I use to encode videos for the diamond so that it uses the built in mp4 codec?
I tried SUPER software to encode but the videos don't show up in the album and won't play in WMP. I have TCPMP but when a camera perspective changes it becomes choppy. Does Core Player 1.2.5 have the same effect with VGA videos?
Click to expand...
Click to collapse
I know this is an old thread but...
I use videora i-phone 3g converter.
Set it to use the H.264 480x320 768kbps stereo/128kpbs Advanced profile.
It spits out excellent quality with no frame drop and its full screen.
Its recognised in wmp and touchflow video tab.
best of all its free
my favourite is slysoft clonedvdmobile + coreplayer. i encode in ipod v5 high res 640x480 (about 640x360 for qidescreen) with quality about 18. 1012kbps, 2 pass. makes about 700mb for 1hr 15mins
Good morning!
I'm using tcmp (the core pocket media player) on my diamond and for the conversion I use PocketDivxEncoder. It's fast easy to use and very flexible with the settings such as dimensions sound and video quality ...
Links:
TCPMP with built in flv support
PocketDivxEncoder
I tried many conversion programs and codecs and I've come to the conclusion that smooth vga(640x480)-video-playback isn't possible on the diamond. Reducing the resolution to 480x360 however brings suitable results with virtually no dropped frames when playing in TCPMP or Coreplayer. The resulting filesize is also very convenient (about 300mb per hour, 200mb for animes).
The best conversion program I tried so far is SUPER, which additionally is Freeware
here is a download link: http://www.erightsoft.com/SUPER.html#Dnload
I created two profiles for SUPER (one for 4:3 videos and one for 16:9) which can be easily loaded via right click anywhere in the main window "Import ..."
ps: I also liked the videora i-phone 3g converter suggested by GutsyTripod, but the playback performence of the mpg4 video seems to bee slightly slower (about 10-15%) than the xvid video produced with SUPER
I am trying to play downloaded DVD movies on my Rhodium and i presume its using Windows Media, the playback is sluggish and the sound is not in sync with the playback, is this the best i can expect after spending £500 or is it just that i need another media player? Shooting video and playing back seems fine the problem is when i convert a DVD the playback is pretty appalling, ANY HELP FROM ANYONE WOULD BE GREATLY APPRECIATED.
tHANKS
Allan
What format are the movies you're downloading? What are you using to convert them? Are the downloaded movies in sync? How about the converted ones? If you play them on your PC, are they synced up?
Check the resolution of the movie. Make sure it is 640x480. You don;t want to have the CPU doing all the resizing as the movie is being played. Some format may be better than the others too. And try with WMP. I believe it has hardware acceleration built-in.
Still I would love the phone be able to play HD 720p videos natively. Maybe one day.
Lord_BlackAdder said:
Still I would love the phone be able to play HD 720p videos natively. Maybe one day.
Click to expand...
Click to collapse
amen! lol anyways ya you just arent formating the dvd'rips very well then cause i have a few full dvd's playing in perfect quality and timing on WMP and that's not even the best player to use
Use core player, it works fine with most videos (far better than the standard app)
Vio
try VIO Video Converter for your DVD conversions and select full quality. The file sizes are large but the quality and audio/video sync is superb.
Core Player is great and I consider 640x384 to be the optimal resolution for playback. Get a good video encoder and experiment for yourself though.
Use Super C to resize the video and then coreplayer to play it, no problems at all!
I can play 800x480 AVC @1.2Mbit/s through HTC Media Player smoothly. In Coreplayer I can't even get 1 FPS out of that file. I use MEGUI with the Zune settings to convert the video from a Bluray format.
As far as I can see, there isn't a good option right now, unless someone can say/prove otherwise.
For example: I have an AVI encoded with Divx 5 636*346, avg bitrtate 900, mp3 stereo. I can get this to play smoothly on much older hardware (a Palm TX), without conversion, via TCMPC.
So, WHY can't I find a player that works smoothly on the TP2?
I've read that the TP2 can handle avg bitrates up to 1,400 kbps; and it doesn't make sense to re-encode at a screen res lower than the bloody device.
Does anyone have any thoughts?
Kloc said:
I can play 800x480 AVC @1.2Mbit/s through HTC Media Player smoothly. In Coreplayer I can't even get 1 FPS out of that file. I use MEGUI with the Zune settings to convert the video from a Bluray format.
Click to expand...
Click to collapse
What is the HTC Media Player? Anyonehave a cab?
barneypooch said:
As far as I can see, there isn't a good option right now, unless someone can say/prove otherwise.
For example: I have an AVI encoded with Divx 5 636*346, avg bitrtate 900, mp3 stereo. I can get this to play smoothly on much older hardware (a Palm TX), without conversion, via TCMPC.
So, WHY can't I find a player that works smoothly on the TP2?
I've read that the TP2 can handle avg bitrates up to 1,400 kbps; and it doesn't make sense to re-encode at a screen res lower than the bloody device.
Does anyone have any thoughts?
Click to expand...
Click to collapse
What I don't understand is that Coreplayer on my device has a verry low FPS. BUT when selecting the Benchmark function, the movie will play beautiful... (Only the movie and sound synchronisation is not so best...)
Anybody a working solution? On a different forum, i've read that HTC Album has the best hardware acceleration. They adviced to play movies with thc album (In the mp4 format)
Greets, Ranney
tech_e said:
What is the HTC Media Player? Anyonehave a cab?
Click to expand...
Click to collapse
It come on the device. HTC Album
i just can't imagine that there is no possibility to play normal divx/avi movies on my tp2 .. just like on pc.
i don't want to waste my time converting all videos just to watch it on tp2 ..
same prob with subtitle support .. can't be that difficult ?! only tcpmp can play them with an extension .. (and that video playback isn't smooth!)
http://kinoma.com/
give that a try and let us know if you are happy or not please
kinoma doesn't support divx/xvid
i use a free program called handbrake and my settings are 480x320,mpeg4,480 biterate-Audio,AAC 160 biterate. i actually used these settings on my G1 originally but when i got my TP2 i tried a few of the movies out since they wur already on my memory card and they all play and sound great on the default player.
im using coreplayer and ive not had a problem playing any movie downloaded from the net. anything from 700mb to 1.6mb dvd rips, ive watched probably 60 odd and they've all played perfectly. never had to convert anything.
coreplayer is definetely the best thing to get supports pretty much everything
i only use the album player for converted hd content (using the converter someone made on this site) = that plays excellent as well, and looks better (i might be ight in thinking album uses hardward acceleration as well)
ranney said:
What I don't understand is that Coreplayer on my device has a verry low FPS. BUT when selecting the Benchmark function, the movie will play beautiful... (Only the movie and sound synchronisation is not so best...)
Anybody a working solution? On a different forum, i've read that HTC Album has the best hardware acceleration. They adviced to play movies with thc album (In the mp4 format)
Greets, Ranney
Click to expand...
Click to collapse
Menu > Tools > Preferences > Select Page > Video
Change "Video Output" to GDI if the player is choppy/crappy. On my Telus (CDMA) Touch Pro 2 the QTv Display works fine but I know other HTC devices have required GDI instead.
The playback on this phone sucks big time! Not sure what it is .... coreplayer GDI does not work and Tcpmp with all kinds of tweaks settings does not play videos smooth at all. You can tell there are frame skipping in my phone. My wing plays videos better than this. GEEZ!!!!!
I'd like to know if Coreplayer will produce noticeably better video playback than the Windows Media Player or HTC Album Player that are already built in to the phone.
I don't care about other features or the number of different formats supported. If I take a simple .mp4 and play that same file with all three players, will CorePlayer have a faster frame rate or any other noticeable improvement?
Thanks for any info.
Coreplayer in my opinion is a great piece of software that you will really enjoy. It is a must for PPC!!
IMissPalmOS said:
will CorePlayer have a faster frame rate or any other noticeable improvement?
Click to expand...
Click to collapse
Coreplayer will be a lot slower than the built in apps, as it is unable to make use of GPU acceleration. People like it because it allows playback of a wider range of codecs and file types. The best video peformance is got by transcoding to .mp4 format and playing with HTCAlbum.
I used core player a lot over the past 2 months. It does have acceleration for mpeg4. I used Handbrake to encode up to 1500kbps and 672x378 Resolution. You can go higher in resolution, but you than cannot multitask without stutter. If I try to do the same with h.264, I am lucky to get up to 480x272 at 100% video playback.
Coreplayer cannot handle 800X480 mp4 videos without stuttering really badly. I am re-encoding some of the videos to 624 X 352 to see if it's more compatible with Coreplayer.
One issue I have with WMP and HTC Album is that they play 2.35 AR movies with the sides cropped and no black bars. I don't know if there's something I need to do when I encode or if that's an issue with the player. I cannot find any options to change this.
Coreplayer will display these movies correctly, but again, the stuttering makes it unwatchable. I am hoping the lower resolution will rectify the problem.
I really can't see any big difference between 624 X 352 xvid files and 800 X 480 mp4 files WRT sharpness and clarity. I don't think screen is big enough to make the distinction between the two resolutions noticeable.
Anything below 700w pixels it will run fine on Coreplayer.
Try out handbrake. It is free. Use FFmepg Mpeg4 files. You can use whatever bitrate you want but I wouldn't go past 1500kbps.
is coreplayer available for free or do i have to pay?
I have a question... I have core player for my device, and I've downloaded hand brake. Im wanting to make mp4's from my dvd collection. what do I need to do, and does handbrake contain everything I need to do this?
nvgear said:
is coreplayer available for free or do i have to pay?
Click to expand...
Click to collapse
Core player is a pay application that is about 30 USD. It doesn't do mp4 videos as well as the built in apps as they use hardware acceleration. What core player does better is play other formats such as divx. I get 23 frames per second in high quality out of my 640x480 divx videos.
Although there is a Rhodium ROM on this site that does include it by default.
stupid question
sancmat said:
Core player is a pay application that is about 30 USD. It doesn't do mp4 videos as well as the built in apps as they use hardware acceleration. What core player does better is play other formats such as divx. I get 23 frames per second in high quality out of my 640x480 divx videos.
Click to expand...
Click to collapse
I've got Coreplayer and it does well with divx, as you say. I just tried some MP4 videos and indeed they didn't play well. How can I get the built in player (not WM Player) to play something? I've removed all file associations from Coreplayer, which allows me to play an MP4 by clicking on it in File Explorer or Pictures and Videos, but is there a way to get the built in player to play an AVI file?
pistou said:
I've got Coreplayer and it does well with divx, as you say. I just tried some MP4 videos and indeed they didn't play well. How can I get the built in player (not WM Player) to play something? I've removed all file associations from Coreplayer, which allows me to play an MP4 by clicking on it in File Explorer or Pictures and Videos, but is there a way to get the built in player to play an AVI file?
Click to expand...
Click to collapse
The stock player will only handle mp4, you just select your videos through the album and you're golden. I have a HD movie that plays with no stutter and DVD quality
chrisrj28 said:
The stock player will only handle mp4, you just select your videos through the album and you're golden. I have a HD movie that plays with no stutter and DVD quality
Click to expand...
Click to collapse
FAB, thanks: now I know.
side note (purely conversational) -- I created a test MP4 with HandBrake, but there was no picture on the device, only sound (it plays fine in QuickTime on the desktop) -- back to fiddling with settings!
I use coreplayer since most of my movies are AVI(xvid). I haven't had a glaring problems with coreplayer other then the flickering blue screen when using TV-OUT. I really hate to trans-code videos.
If I really had to use TV-OUT for a video presentation, I found these setting removed 99.9% of the flickering. See link below:
http://forum.xda-developers.com/showthread.php?p=4761775#post4761775
***edit: I have been using other ROMs and they run fine with the settings listed on the link.***
mda71 said:
I use coreplayer since most of my movies are AVI(xvid). I haven't had a glaring problems with coreplayer other then the flickering blue screen when using TV-OUT. I really hate to trans-code videos.
If I really had to use TV-OUT for a video presentation, I found these setting removed 99.9% of the flickering. See link below:
http://forum.xda-developers.com/showthread.php?p=4761775#post4761775
***edit: I have been using other ROMs and they run fine with the settings listed on the link.***
Click to expand...
Click to collapse
i have had the phone since day one and still havent got core player working right it just stutters along
all i want to is to be able to convert dvd into avi at setting that will display it as close to full screen as possible with audio and video in time
any suggestions would be great
Hanson68 said:
One issue I have with WMP and HTC Album is that they play 2.35 AR movies with the sides cropped and no black bars. I don't know if there's something I need to do when I encode or if that's an issue with the player. I cannot find any options to change this.
Click to expand...
Click to collapse
I've not tried this with a video that is wider than 16:9, but certainly one that is narrower than the screen aspect ratio is played zoomed to full-screen by default, but this can be overridden quite easily. In HTCAlbum if you tap the screen you get a row of buttons appearing at the bottom, including pause and stop. The right-hand button controls zooming and stretching. By default a video is zoomed and cropped to fill the screen. Tap the right hand button once and it switches to stretching the video to full screen; tap it a second time and it switches to the correct aspect ratio (with black bars).
@combat goofwing
Are you using the old free CP or the new, $$ one? The free one stutters. The paid one works fine, set to Qtv. No transcoding, no stuttering. I just shoot my vids over and I'm gtg.
barneypooch said:
@combat goofwing
Are you using the old free CP or the new, $$ one? The free one stutters. The paid one works fine, set to Qtv. No transcoding, no stuttering. I just shoot my vids over and I'm gtg.
Click to expand...
Click to collapse
its paid for and set to qtv but some files still stutter along
Shasarak said:
In HTCAlbum if you tap the screen you get a row of buttons appearing at the bottom, including pause and stop. The right-hand button controls zooming and stretching. By default a video is zoomed and cropped to fill the screen. Tap the right hand button once and it switches to stretching the video to full screen; tap it a second time and it switches to the correct aspect ratio (with black bars).
Click to expand...
Click to collapse
Wow. That was so simple. And here I was looking in the menus.
Thanks for the tip!
Accessing the built in HTC Album Player
Can anyone tell me how to access the HTC Album player? It just comes into action when I open a Video file, but can we access the program itself and adjust any settings etc.? One post says it only plays mp4. It plays my 3gp files too. Does it play any other formats?
Hi,
I am quite new to the Windows Mobile scene buying the new HTC HD2 (Leo).
I am looking to convert movie files from .AVI to .MP4 for my HD2 but I was wondering.
1) What is the best converter to use for a Mac.
2)What is the best settings. I.e. Bitrate, Audio, fps, kbps and so on.
I have tried a couple of settings but really have no clue to the best settings.
Any information and help is much appreciated!
I use the files that also work on my iPhone.
So,
.mp4 h.264
1408kbps or 768kbps
audio 160kbps
fps - I leave as the same as source
As for a MAC program - I would use Handrake.
All just my personal settings - others will of course, have other views.
What's the point of converting AVI? HD2 can play it pretty well without any conversion.
xaban said:
What's the point of converting AVI? HD2 can play it pretty well without any conversion.
Click to expand...
Click to collapse
File size? h.264 should be smaller for the same quality.
xaban said:
What's the point of converting AVI? HD2 can play it pretty well without any conversion.
Click to expand...
Click to collapse
File size? h.264 should be smaller for the same quality.
greatcapp said:
File size? h.264 should be smaller for the same quality.
Click to expand...
Click to collapse
If your time is cheaper than a big memory card, you can waste it on converting etc.
xaban said:
If your time is cheaper than a big memory card, you can waste it on converting etc.
Click to expand...
Click to collapse
wow, who nicked the jam out of your donut?
If you read my original reply, I'm using files that I already have for my iPhone. some of which I've converted, others that I've downloaded.
So I've not really wasted any time. I was simply offering an option to the OP.
The main reason I added that it was my opinion, was so that others didn't need to add how things COULD be done differently, just for the sake of it.
now the OP has at least 2 options - Just use the avi's or re-encode ( or grab h.264 files from other sites).
xaban said:
What's the point of converting AVI? HD2 can play it pretty well without any conversion.
Click to expand...
Click to collapse
Can I ask you which player do you use.
I have movies on my sd card and with Coreplayer I get error message "File not found!\Storage (FFFFFFF8)". And with Windows media player I get error "Cannot play the file". Movie plays just fine from internal memory but that one lacks space.
Any advise would be much appreciated.
I forgotten to mention that the codec is Xvid.
I have tried playing some of my .avi formatted movies and I get errors with windows media player and I have tried a movie I d/l in .mp4 and both album and media player will play it but the screen is grey with sound and every now and then the picture will come on.
I'm guessing due to wrong settings.
I am just looking for the best settings to get smooth play and clearest viewing. I'm not too fussed with size as I have a large enough card.
grozni2010 said:
Can I ask you which player do you use.
I have movies on my sd card and with Coreplayer I get error message "File not found!\Storage (FFFFFFF8)". And with Windows media player I get error "Cannot play the file". Movie plays just fine from internal memory but that one lacks space.
Any advise would be much appreciated.
I forgotten to mention that the codec is Xvid.
Click to expand...
Click to collapse
what version of coreplayer are you using?
anyway try 1.3.6. it should work
greatcapp said:
wow, who nicked the jam out of your donut?
If you read my original reply, I'm using files that I already have for my iPhone. some of which I've converted, others that I've downloaded.
So I've not really wasted any time. I was simply offering an option to the OP.
The main reason I added that it was my opinion, was so that others didn't need to add how things COULD be done differently, just for the sake of it.
now the OP has at least 2 options - Just use the avi's or re-encode ( or grab h.264 files from other sites).
Click to expand...
Click to collapse
I am using the same mate, I had all my AVI files converted to my old iPhone and I have found that they play great on my HTC HD2, infact I think they look even better with bigger screen, But that's just my opion.
The converter I used was download from the Pirate Bay and it's free from their home page VioVideoConverter
I'm not actually using coreplayer.
I did have coreplayer on my HTC Touch HD but i'm seeing about just utilising the album player and windows media player.
Any of the guys using HD2 can test these videos and let me know if they work fine or have problems playing?
http://www.multiupload.com/DYPQ7Q3LDW
I'm using the last Coreplayer.
But I figured if it works for you it should for me to.
So I figured out that if I run movie from Resco explorer or built in explorer the problem is still there but if I run it from Coreplayer via open command the movie works.
So there must be a problem how explorer sends a location path to the coreplayer on HD2.
Is this only me or do you experience the same behavior to?
kenkiller said:
Any of the guys using HD2 can test these videos and let me know if they work fine or have problems playing?
http://www.multiupload.com/DYPQ7Q3LDW
Click to expand...
Click to collapse
All three files play, but they seem a bit jerky in places. They're not the best samples to test video with.
They suffer from artifacts in quite a few place using WMP, and in Core Player, they are jerky. Personally, I wouldn't suffer watching them, but they do play.
It looks like you used isom advanced video codec. I find that h.264 gives superb results.
greatcapp said:
All three files play, but they seem a bit jerky in places. They're not the best samples to test video with.
They suffer from artifacts in quite a few place using WMP, and in Core Player, they are jerky. Personally, I wouldn't suffer watching them, but they do play.
It looks like you used isom advanced video codec. I find that h.264 gives superb results.
Click to expand...
Click to collapse
Well, they are done using x264, AVC is just a subset of it. Plays fine on the PC, but I have no HD2 to test yet, so need some help.
Hmm...I'm using mencoder/winmenc to encode, so can't just update without the coders of mencoder updating. Mencoder is in turn a derivative of x264 if i read correctly. Meanwhile I will do some research on a GUI for x264.exe. I've used mencoder for most of my encodes so far on other phones, and it's been pretty good to me.
Here's another two encodes, this time with lesser (only 1) ref-frames, and using the latest version of the mencoder.exe....do let me know if it's better/worse. One is with the [email protected] profile (which i guess will have trouble), the other is with the good old [email protected] profile.
High
http://www.multiupload.com/TH2FNWZHO6
Main
http://www.multiupload.com/4JYVROSVSM
I have tested a couple of settings and I have found a format that works so far and is great quality.
I'm using Xilisoft Converter on Mac OS X.
MP4
Bit Rate: 2000-2500(Max)
Frame: 29.97
Audio Codec: mpeg4aac
Bit Rate: 192
Channel: 2
I am using the PS3 pre-settings then changes the video size to 800x480. It's great quality and plays smooth but the file size jumps from 700mb to 1.8g so any idea's on how to bring that down???
I'm still checking out different settings..
Chocco said:
I have tested a couple of settings and I have found a format that works so far and is great quality.
I'm using Xilisoft Converter on Mac OS X.
MP4
Bit Rate: 2000-2500(Max)
Frame: 29.97
Audio Codec: mpeg4aac
Bit Rate: 192
Channel: 2
I am using the PS3 pre-settings then changes the video size to 800x480. It's great quality and plays smooth but the file size jumps from 700mb to 1.8g so any idea's on how to bring that down???
I'm still checking out different settings..
Click to expand...
Click to collapse
Your bitrate is too high.
If you're converting standard def media, 1200-1800 should be more than enough.
Also, if the resolution of the source is less than 800x480 in the first place, don't waste space trying to up the resolution. Re-encode at the original resolution.
kenkiller said:
Well, they are done using x264, AVC is just a subset of it. Plays fine on the PC, but I have no HD2 to test yet, so need some help.
Click to expand...
Click to collapse
They played much smoother for me on my desktop compared to on the phone.
kenkiller said:
High
http://www.multiupload.com/TH2FNWZHO6
Main
http://www.multiupload.com/4JYVROSVSM
Click to expand...
Click to collapse
Both seemed to play better than than the preivous encodes in WMP - no artifacts. Looked nice & smooth.
Core Player still struggled - very jerky.
Would be much easier to guage a non-animation/less dark sample.