Database Users

Dump Prophet/M600/S200 ROM : How-To ???

Hi,
I just bought a French Orange SPV M600 yesterday and before making anything on it (upgrading, installing softwares, unlocking SIM, etc) I'd like to dump the ROM and store it in a safe place in order to be able to restore my phone if ever it comes to "brick" state
I read a lot today about that, using mtty, romupdate, bootloader mode etc...but I can't achieve to do it...
1- I kill activesync
2- I put my phone in bootloader mode (camera button + soft reset) and I get the color stripes fine
3- I connect my USB cable, I got the status-message "USB" on the phone screen = OK
4- I launch mtty, enter \\.\blablabla001 as port to connect to = OK
5- this is where nothing works anymore : typing D2S in the console gives an error msg (bad command, type h or ? for help) Something I noticed and being quite weird : I don't have "USB>" as a command prompt but "CMD>"...
6- even typing h or ? makes nothing, I get the same error msg :? The only recognised command is "usb" and the output message is then "already connected to USB"
Is this due to a bad software version ? (I use mtty 1.42)
Is it a SPV M600 incompatibility ? (too recent ?)
Has anybody achieved to dump such a ROM on SD-Card ? If yes, how please ?
Thx a lot !
EDIT : here's mtty's screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Use r2sd all
this will backup the device to a sd card but ALL DATA on the card WILL BE LOST!!! .
However this command will only work if the phone is cid unlocked.
Hope this helps
Thanks

Hi, thx for your reply.
I tried also r2sd all and I get an error message saying I can't. (something like "authorized level...blabalbla)
Then I unfortunately guess my SPV M600 is CID locked :-(
I hope it will never badly crash before I can achieve to find a full-backup-restore solution...
Already happened once and I had to wait ages for getting it repaired by service-support... If only I had a ROM backuped somewhere I could restore the device in its "factory" state without bothering trying cheating it...
I've read some threads and it would seem that Qtek S200 as well as HTC Prophet or iMate Jamin are CID unlockable...but not the Orange one :-(

Bu what is the program that u've been using to dump the rom ?? Link and name please...

I goofed: Now my 4350 is no more

I know that this has been partly addressed in other threads, but I failed to find an answer so this is a desperate plea for assistance.
My 4350 is an unbranded and not locked device. This may (or may not) be of significance. It has a Swedish keyboard, and I *guess* that the rom also was swedish (no way to find out right now I guess). Current version numbers are
IPL 1.08.0001
SPL 1.08.0001
GSM 02.71.90
this is all that is shown after my failed attempt to flash the device with a WM6 image. Maybe I did not pay attention, maybe the flash failed for another reason.
Anyway, I downloaded the PDAVIET ROM WM6.0 v4.12.07.05, discussed here
http://forum.xda-developers.com/showthread.php?t=318962
During the flashing, I got a single error saying
ERROR: ITWriteDisk - The drive cannot find the sector requested.
Edit: I guess this was caused by me forgetting to disable power save in the device. At least this was hinted by someone else in another thread. Am I correct?
After the failed boot, I tried to write another rom image using the RUU program. The RUU failed to identify the current image version, and when I proceeded to write the new rom 5.4.405.1, the progress bar on the handheld goes to 2%, and then reboots. The RUU then says "ERROR 294: INVALID VENDER ID"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what can I do now? Except call to HTC support and see if they can help me to revive the device ...
More important, what did I do wrong?

If you get the message that says INVALID VENDER ID then it means that you are using the wrong RUU. For example I have a WWE device and if I used a Russion RUU I would get a invalid vender id error or vice versa.
The only solution for you at this moment is to find a swedish RUU. If there isn't a swidish RUU then you will have to wait untill the WM6 RUU is released.

ok, I understand that by now. But what if I can find a person that owns a Herald with a V5 Swedish rom. Is there a way to "suck" the rom out and then re-install it on my device?
I think that I have read that you can dump the rom to the SD card, but I can not find the posting. Anyone?
Anders

I have heard of this before but I don't know how to do it sorry.

You can make A ROM Dump (check the WIKI for more info) but you will not be able to flash this dump on your Herald.

The Dutchman said:
You can make A ROM Dump (check the WIKI for more info) but you will not be able to flash this dump on your Herald.
Click to expand...
Click to collapse
ok, so what is the point of doing this ROM dump if the result is useless

The Dutchman said:
You can make A ROM Dump (check the WIKI for more info) but you will not be able to flash this dump on your Herald.
Click to expand...
Click to collapse
Ah that is true because the only method that we herald/wing/terra users have at this moment AFAIK is using asergs methods which would require you to be in a working OS. Correct?

kennyidaho said:
Ah that is true because the only method that we herald/wing/terra users have at this moment AFAIK is using asergs methods which would require you to be in a working OS. Correct?
Click to expand...
Click to collapse
Totally correct! we need OR the official HTC WM6 update, RUU in your own language (for a working OS), OR a modified bootloader that allows unsigned code..

Universal "No GSM" problem

Hi,
Please tell me is there any recent solution for members with "No GSM" problem?? i have this I-mate jasjar with ROM D 1.13.53 WWE and radio rom is missing.
i have tried many radio roms including official i-mate with NoID upgrade but it does not flash. basicaly it gets stuck at 0% (every radio roms including Buzzlights universal unlocker v1).
Please help me to fix this
Phone is working 100% only no signal and splash screen saying No GSM

xdaking said:
Hi,
Please tell me is there any recent solution for members with "No GSM" problem?? i have this I-mate jasjar with ROM D 1.13.53 WWE and radio rom is missing.
i have tried many radio roms including official i-mate with NoID upgrade but it does not flash. basicaly it gets stuck at 0% (every radio roms including Buzzlights universal unlocker v1).
Please help me to fix this
Phone is working 100% only no signal and splash screen saying No GSM
Click to expand...
Click to collapse
http://pdaclub.pl/forum/index.php?topic=83769.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Misiex said:
http://pdaclub.pl/forum/index.php?topic=83769.0
Click to expand...
Click to collapse
Hi, thank you for your quick and useful reply. i have download the Universal-radio.img file and copied it to the main root of my MMC card (done FAT32 format). but when i enter into boot loader by pressing backlight+power+reset it does not goto sd card flashing screen. just show the v0.60 and Serial on the screen
any idea how to do that ??
thanks again

Please can somebody kindly translate this to english. need to flash universal radio from SD
please help
Tu jest do pobrania obraz karty ze zgranym RADIO-ROM-em 1.14.10 ; ftp://ftp.xda-developers.com/Universal/Technical/XDA Exec ERROR 114/
Potrzebujemy kart o pojemności do 128MB nawiekszych nie zadziała ( karta powinna być sformatowana na FAT32)
Jak to robimy (przykład) :
( dysk) :\>ntrw.exe write xxx.img (karta):
where i can find ntrw.exe file
Wkładamy kartę do slotu. Wprowadzamy Uni w tryb BL a dalej tak jak na rysunku z manuala.
Jesli uzyskamy : "sections=1 not allow update".
To oznacza to że musimy zdjąć CID-a .
Uwaga procedura opracowana wyłącznie teoretycznie - nie mam możliwości jej sprawdzenia

can some1 explain this step by step, the pic doesnt really show anything, imean after the boot loader i dont see those stuff? some1 help plz, i have the same problem no gsm = no phone= no life.

I've created this only theoreticaly.
It probably will work if your Uni is Cid unlocked .
You can download image for SD card with radio 114 image here : ftp://ftp.xda-developers.com/Universal/Technical/XDA Exec ERROR 114/
Your card cannot be bigger than 128 MB and has to formatted FAT32
How to create file on SD card - You have to use ntrw.exe ( see sample ->:
( drive) :\>ntrw.exe write xxx.img (card):
You can find ntrw.exe : ftp://xda:[email protected]/Magician/Tools/NTRW_2.0/ntrw.exe
Insert card to Universal .Put Universal into BL mode .
If you will see : "sections=1 not allow update" it means that you have CIDlocked Universal so procedure cannot be done this way.
Other solutions can be done by JTAG pinouts - but I don't know how.

Is there any way we can do a cid unlock and then try loading the radio rom for these handsets......

This doesn't seem to do anything ... tried numerous time yet to no avail..

IPL or SPL 3.08 failed formatting the partition RECOVERY

I am a great FAN of this section as I have flashed almost every WM6 or WM6.1 ROM into my charmer....
But the problem came the last month when I had a fialed Flashing of the ROM resulting in the hanging problem at the T-mobile Boot screen with IPL 3.08 and SPL 3.08!!!
As I have read almost every thread and discovered that a lot of others are facing the same problem wthout any satisfactory solution.....(Reason: on hard reset it says formatting failed!!!)
Infact the only story of recovery was from dorfdisko
dorfdisko said:
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
hey, now my battery is full charged an the ruu starts patching but at 95% ist says:
This NBF File cannot be used for your PDA Phone. Please check NBF File.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used this one:
RUU_Prophet_220734_2207114_024721_NVID
i tried also:
Prophet_G3_G4_RadioRom_v2.69.21
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
but no succeed
what should i try now?
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
Click to expand...
Click to collapse
But for me I could not get through this grim situation with the same result shown above error at 95%......
So I would like to request all the developers (especially dorfdisko the only lucky person coming out of this situation using the PROPHET ROM in someway!) to look into the matter systematically and develope some solution in the form of specially cooked ROM or something like this!!!
Thanks in anticipation on my behalh and others who are caught up in similar situation!!!

Have you tried http://forum.xda-developers.com/showthread.php?t=471490 ?
You can also try to flash the latest German ROM. (I do that with the English one when something fails.)
That may only work with the NoID RUU from the link above. It can work because the IPL and SPL of a German ROM have got other extended code numbers also they are the same version. They will overwrite the old ones and maybe that works.
I can upload the nk.nbf later for you.

Yes please!
It would be an aweful kind of you!!!

Here is the needed German nk.nbf. Use only with NoID RUU!
http://rapidshare.com/files/217609597/nk.nbf
Hope this works for you.

Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.

ChrBeck said:
Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.
Click to expand...
Click to collapse
Sorry I was busy somewhere else so could not found time for testing this procedure!!!
Would tell you soon about the said matter!!!

Thanks for that
EDIT
I've seen that you opened a thread before and I replied there too. Not very nice to open a new one. And next time tell us that you opened a thread before. That will help us much.
Thanks
END OF EDIT

Sorry for that issue!!!
And as regards your ROM file it didnt work either.
As the phone hangs again on the splash screen and on hard resetting it says format failed as ususal!!!
Now what can be done?

You may can't flash the File with the NoID ruu because your device isn't CDI unlocked. I'll search and maybe tell you things later.

The file was flased to the end but then that was the result as I described above!
Anyway thanks for your painstaking!!!

Yes. It looks like flashed to the end. But the bootloader rejects everything and nothing will change. You can only flash with the original Utility with fitting code. Nothing else. Believe me it got never flashed.
And I've got an other idea:
You can format the Charmer over TTY. But I don't know about funktion in bootloader mode. And I would not recomend you to try it on your own. Maybe Vlodeck reads the thread. He should know more about it. Otherwise I can ask in Wizard forum for you.

OK I have a idea now. You can try with MTTY and I can tell you how.
First you need MTTY: http://wiki.xda-developers.com/uploads/mtty.exe
You need to have a full battery. (Otherwise you can power your phone with a AC adaptor with 3 4.5 or 5 volt. I can tell you the pin layout)
Put your device in bootloader mode (Press Camera while reseting).
Connect it to USB.
Start MTTY and choose USB.
Wait untill it is connected to the phone.
First type in task 32 and hit enter....Wait for feedback.
Then type task 28 and hit enter....Wait for feedback.
Now start a original ROM upgrade and let it run till the end.
Warning: Never restart your phone untill the Flashing is finished. Restarting the phone will kill your device completly.
If there are errors with the comands, for example Invalid comand please write me. I'll tell you what to do then.

i have the same problem with ipl & spl 3.08
this last solution doesn`t work.
do you have another idea?

What feedback do you get after you typed the comands?

this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h

OK. That was clear. The comands won't work in Cmd> Mode. You need to get in USB> Mode. But I don't know how to do that so I can't do anything at the moment.

adrianoND said:
this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h
Click to expand...
Click to collapse
Command wrong, need >set 32< and format all or format EXTROM, but you need Gold Card created QMAT programm and worked WM Phone to create GoldCard.

My HTC Touch P3450 not turning on

My HTC Touch P3450 not turning on
Splash screen appears and then turns off
Please help me

provide more info m8, in order to get a help. Also reduce your font size.

I got the same problem.
Since i upgraded my Radio to a newer one my Touch will not turn on anymore.
When I turn on the device the splash screen with T-mobile comes and then the screen turns off. (before the wm screen should appear)
I actually am able to upgrade the Rom by tapping the camera button a few times.
A Red Green Blue screen appears with in the left corner IPL 2.81.0002 SPL 1.11.0000.
At the bottom sf the screen is a white bar with USB standing in it.
Hope you can help me...
ps sorry for my bad explanation but i tried to do my best lol

Did you cid unlock your device?

I probably did?
At first i loaded elf-uspl.exe and when that DOS thing finished the rom upgrader started.
That was done correctly so that means i CID unlocked it right?

thamrx said:
I probably did?
Click to expand...
Click to collapse
Very funny
From your SPL it doesn't look like it's unlocked ... DDo it properly http://forum.xda-developers.com/forumdisplay.php?f=374 and also download the device info http://forum.xda-developers.com/showthread.php?t=418892

Oke I downloaded the device info tool, but the problem is my elfin wont boot WM so my computer cant connect trought activesync.
Can you tell me which one is the proper way to do it? from these http://forum.xda-developers.com/forumdisplay.php?f=374

thamrx said:
I got the same problem.
A Red Green Blue screen appears with in the left corner IPL 2.81.0002 SPL 1.11.0000.
At the bottom sf the screen is a white bar with USB standing in it.
Click to expand...
Click to collapse
If usb is visible then u r connected, it's called bootloader mode

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get on my phone, when I start Device info on my PC nothing happens...

That doesn't look like a standard elf ! look here http://wiki.xda-developers.com/index.php?pagename=HTC_Elf

When I looked in the settings > modelno. it was model elf0300.
So what do you want me to do?
ps thanks for your quick help I realy appreciate it!

Try to hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If this method doesn't work, it means you have a chinese clone

I've done something else.
I upgraded to IPL & USPL 3.14 which can be found here: http://forum.xda-developers.com/showthread.php?t=408637
And now my device is loading windows mobile 6.5 (to which I upgraded last night)
I'll let you know if everything works fine now.

Great, it's obviously not a clone and now you are on the golden path Take my suggestion and upgrade your USPL to HSPL http://forum.xda-developers.com/showthread.php?t=445666 then you are free to change any rom
Good luck

Ok I will do that.
This is what Device info gives me now:
Touch version : Elfin
Device ID : ELF030050
CID : T-MOB003
IPL : 3.14.0002
SPL : 3.14.0000
ROM version : AGS 2 Beta
ExtROM version : None
Operator version : None
AKU version : 5.3.0
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEL009-00
Click to expand...
Click to collapse
Thank you very much!
Ps. lol my model no. is different from what WM 6 told me it was

thanks I did this HardSPL.
Touch version : Elfin
Device ID : ELF030050
CID : T-MOB003
IPL : 3.14.0002
SPL : 3.14.cmonex (Hard SPL)
ROM version : AGS 2 Beta
ExtROM version : None
Operator version : None
AKU version : 5.3.0
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEL009-00
Click to expand...
Click to collapse

At last, some nice looking specs welcome to the flashing community
Ps: add [Solved] to your post title

I can't this I didn't start this thread.