All,
Made a new 23554 build for my Omnia 910. However, I am finding that when I try to run Internet Explorer (mobile), it always gives me the message:
Internet Explorer cannot download blank.
If I click Cancel it will load my start page and things work normally. But I am not sure why I am getting this message - I don't remember getting it on previous builds.
Anyone seen this before? And know of a fix (either now after the build or before cooking the final ROM)?
Thanks!
UPDATE: Never mind, figured it out. Build didn't have the METADATA folder in it when it was cooked
/Chimp (Tom)
So I can just add this Metadata folder somewhere to fix this problem? Please let me know where to create this new folder. Thanks.
Kyle
krinehart said:
So I can just add this Metadata folder somewhere to fix this problem? Please let me know where to create this new folder. Thanks.
Kyle
Click to expand...
Click to collapse
did not look like there were many people who could answer this including the OP. There is solution, but not enough. Can someone please confirm if there is a way to solve this error 'WITHOUT' having to cook rom? I can't cook. I am using someone's rom but can i get rid of this error?!!? someone please post back!!
Related
Hi!
I bought an XDA Exec about a month ago, and I've already had a problem with it. I installed some 3rd party software which it didn't seem to approve of.
Anyway, to cut a long story short - the file camera.exe now appears to be missing. It's not on the O2 disks, and I can't find it anywhere. Can anyone help by sending it to me, please? You'll have my undying gratitude if you do. I might even stretch to buying you a beer.
One thing, though - I'm a complete beginner with this device, so please make any explanations of what to do as non-techie as possible.
Thanks in advance for any assistance you can offer.
Okay, I fixed camera.exe. 8)
Thing is, now camera.lnk seems to be corrupt too. Would anyone be kind enough to let me have a copy of that?
SQirl said:
Okay, I fixed camera.exe. 8)
Thing is, now camera.lnk seems to be corrupt too. Would anyone be kind enough to let me have a copy of that?
Click to expand...
Click to collapse
Try freeware Total Commander for PocketPC, this cool file manager can create a new fresh shorcuts.
Help me!!!
I got the same problem. Where did you find the camera.exe and camera.ink file.Could you please send me to [email protected]
camera.exe
Could you tell me how you fixed it?
and if i need to replace the file where can i get them from?
Pratik
You need to replace camera.exe - you can download it from here. Or at least, you could a couple of weeks ago.
http://www.yousendit.com/transfer.php?action=download&ufid=329C495F0E41A994
The thing is, if you try to add camera.exe to your XDA, it won't allow you to do that. You need to zip the file, then copy camera.zip to your XDA, unzip it on the XDA and then it works!
The problem is that the camera button won't work then, because camera.lnk is also corrupt. You need to create a new shortcut for the new camera.exe. I can't remember offhand how I did it, but I'll check it and get back to you.
Hi I am looking for an app to unlock my windows files on my phone. When I try to delete most files it says "unable to delete, may be in use" so is there a program to let me do this and is it the one posted called "Unlocker"? Thanks...TJ
TrekkerJmm said:
Hi I am looking for an app to unlock my windows files on my phone. When I try to delete most files it says "unable to delete, may be in use" so is there a program to let me do this and is it the one posted called "Unlocker"? Thanks...TJ
Click to expand...
Click to collapse
I encountered this problem once about 8 months ago. I had made a couple of posting on this forum somewhere. I can't remember what I did to revolve it but nobody else had similar problem then. I'd also try to find and see if I can locate my post.
Thanks I would appreciate it. I want to remove some files that are not necessary...TJ
Here it is. I hope this matches the problem that you were describing.
http://forum.xda-developers.com/showthread.php?t=309932
Thanks for the reply. I don't want to to a hard reset unless its necessary so I'll just wait for a program to come along. Thanks again...TJ
Hey guys, I really need some help here. I've posted this question in the original Kitchen forum , and on the individual ROM forums over at PPCgeeks, but there so crowded now that no ones helped. But I know one of you geniuses can answer this with no problem. So here goes.
I've tried to use PPCgeeks Vogue Kitchen for the past week. I've tried three different, I guess there the ROM selections, from three different people, plus the one that's with the kitchen. I've run the updater every time I start it up, so I know it's not that.
As soon as it loads up, I pick which ROM selection txt file I want to use for my selections. Then I go thru and pick the stuff I want on my ROM. When done, I click on the icon in the toolbar that says "BUILD ROM". It brings up another window that says it's scanning the files and creating a bunch of things. This all works just fine.
When It gets to the end, it pops up a error message and says that it cant find a file. Then it goes back to the Kitchen part. Thats as far as I can get. I have no clue what the file is, or where to get it or make it. The file it says is missing is located in ,
C drive/ Document and Settings/ "my user name"/ Application Data/ hIq INC
It wont let me upload the ROM straight from the Kitchen to the phone either. I guess that the ROM has to be built first huh? But anyway, Someone please help me here. Tell me what I'm missing or doing wrong. I may be leaving out a step, but if so I dont know. PLEASE guys , someone, anyone, help me out here.
I'm getting crazy over here...
from one moment my G'reloc does give me errors when applying.
It says:
Can not open file C:\Kitchen\SYS\***\***
*** = a different map/file each time
I tried different G'Reloc.exe files and used different SYS-folders (even ones that worked before without any problems)
Can not cook roms anymore because they will not boot somehow...
Please help me with this weird error..
What are the files it's trying to access?
Also check out the IRC room they have, if it's still up at least.
TheChampJT said:
What are the files it's trying to access?
Also check out the IRC room they have, if it's still up at least.
Click to expand...
Click to collapse
It's a different file each time....beats me...
But often it is one of the bluetooth related files....
Maybe the files you downloaded were corrupted. Try manually replacing the files, or just uninstall and reinstall the kitchen.
TheChampJT said:
Maybe the files you downloaded were corrupted. Try manually replacing the files, or just uninstall and reinstall the kitchen.
Click to expand...
Click to collapse
Ok I know a little bit more...:
I formatted my laptop and did a clean install of windows...
After that g'reloc worked again.
I installed all programs I always use on my pc again.
And today when I used G'reloc again I get the same error each time. Even if I use different locations or diffirent SYS folders (also ones I know they work!)
Which program or setting interacts with G'reloc???
Merten i don't use that program because i don't know what it does.
But i tryed to open it but i think i got the same error as you got.
Is it something like this: cannot open file (root\dir\imageinfo.bin).
And then you only have one option to click the ok button (this will exit the program)?
Know i tryed some other g'reloc programs what i got and the all gived me the same error pointing to the imageinfo.bin and then give me one option to click the ok button.
But there was one g'reloc program what did work and gived me no error.
I send a email to you with g'reloc.exe so it could be that it will give your virusscan some trouble because it is a .exe file I hope it will work for you.
I will back in some hours so i can't respons to your questions so fast.
menomenic said:
Merten i don't use that program because i don't know what it does.
But i tryed to open it but i think i got the same error as you got.
Is it something like this: cannot open file (root\dir\imageinfo.bin).
And then you only have one option to click the ok button (this will exit the program)?
Know i tryed some other g'reloc programs what i got and the all gived me the same error pointing to the imageinfo.bin and then give me one option to click the ok button.
But there was one g'reloc program what did work and gived me no error.
I send a email to you with g'reloc.exe so it could be that it will give your virusscan some trouble because it is a .exe file I hope it will work for you.
I will back in some hours so i can't respons to your questions so fast.
Click to expand...
Click to collapse
Thanx man for the effort. But I did not receive a thing... did you mail to:
[email protected]?
If your back maybe you can upload to rapidshare?
Thanx anyway!!
Well, I came across two things in PPCGeeks forum. People reported errors when they were running G'reloc on FAT32 en fixed it by changing to NTFS.
The other thing was that people reported a fix by just disabling their antivirus program. This might explain why it worked before you started installing all your programs on a clean windows install. I hope it works for you as well because I really like your roms
Maart84 said:
Well, I came across two things in PPCGeeks forum. People reported errors when they were running G'reloc on FAT32 en fixed it by changing to NTFS.
The other thing was that people reported a fix by just disabling their antivirus program. This might explain why it worked before you started installing all your programs on a clean windows install. I hope it works for you as well because I really like your roms
Click to expand...
Click to collapse
WOOHOOOO!!!! the Virusscanner was the problem!!!! I use kaspersky for a year but probably since a recent update it messes up g'reloc....
I will be cooking again.....!!!!
Thanks for the great tip!!!!!
Next time, please post questions in the Q&A section.
thank you
I use WLM 10.6.0053.1000 and somehow my emoticon screen going weird like in the screenshot... I reinstalled, redownloaded from live site but seems like the emoticon won't show up for unknown reason.
I tried to check if there is any missing files but all files are OK.
Registry check also OK.
I'm using WM6.1 official v1.77 i-Mate 9502.
Please help me how to restore those emoticons....
Anyone? No one know the solution?
Arghhhh.... No answer and no one can answer.... >,<
Seems like the files are missing. Where did you install it, on the device, flashdisk or storagecard? I'd browse for the files first and see if I could find them.
Btw, I think this post might get moved since it aint really a post that belongs in this forum
Umm, maybe but I don't know what files are required to display that emoticon.
Yesterday I reinstalled the WLM (downloaded from live site http://mobile.microsoft.com/live/en-us/mobile/default.mspx).
For installation, it didn't give any option, it's all automated and installed in the device (precisely in the Windows folder).
But FYI, I checked the installation using SKTools and Pocket Mechanic, the installation is OK..
No files missing and registry are intact. Maybe other files (the system files) are missing? or some registry keys are missing?
Thanks for your help... ^^
I'll be waiting for your info for restoring the emoticon... ^^
Yup, sorry for posting in the wrong subforum. Moderators,please help me to move this thread to correct subforum. Thanks.. ^^
Crescendo Xenomorph said:
Umm, maybe but I don't know what files are required to display that emoticon.
Yesterday I reinstalled the WLM (downloaded from live site http://mobile.microsoft.com/live/en-us/mobile/default.mspx).
For installation, it didn't give any option, it's all automated and installed in the device (precisely in the Windows folder).
But FYI, I checked the installation using SKTools and Pocket Mechanic, the installation is OK..
No files missing and registry are intact. Maybe other files (the system files) are missing? or some registry keys are missing?
Thanks for your help... ^^
I'll be waiting for your info for restoring the emoticon... ^^
Yup, sorry for posting in the wrong subforum. Moderators,please help me to move this thread to correct subforum. Thanks.. ^^
Click to expand...
Click to collapse
try this one
dannyedilber said:
try this one
Click to expand...
Click to collapse
Tried just now but still same... only version in about page is different... T,T
Thanks for helping...
Seems strange... I checked all the system files in Windows folder, none missing/replaced by files with same name...
Maybe the registry?
Waiting...
And here we go... No one knows about this problem...
No answer as well...
Seems that none of developers here able to solve this... Or they don't know anything about this issue...
Up! Anyone here can resolve this? Or ppl here can't even solve small bug like this?
Useless to ask here... =,="'
bump =,="'
Please upload here your 10.6.0053.1000 cab. I have a look of it.
I just install the 10.7.xxx available from microsoft's site and still like in the first post. T,T
Do I need to upload the latest WLM from Microsoft's site?
And thanks for your help...
And I think, it might be something from registry's missing (maybe something in HKEY_Classes_Root)....
If I do HardReset, all is solved, but it's pain for me to reinstall all apps and do re-setting all things inside... >,<
Sorry I need the 10.6.0053.1000 cab before I can help you. It`s not on the windows side. Please upload it here. This was the first cab that you install or was in the rom and I must test it. No cab - Sorry no help.
Wait, I must search the cab file first. Because I already overwrite it with new one.
And the old one that came with my ROM is v10.6.0034.0800.
The v10.6.0053.1000 I downloaded it from Microsoft's site also. And I will try to recover that installation file from my harddisk.