After turning on all tweaks for LED Notification indicators, i received a phone call and in the middle of my conversation my hearing speaker went off with LED light. Performed hard reset twice, nothing happened. Now, LED doesn't blink and hearing speaker dosen't work AT ALL. PLEASE HELP!!! I just got HTC HD2, USA T-Mobile version
When I charge my phone, LED is lightning up, but hearing speaker still doesn't work!!
How to turn back original setting for LED indicator?
Related
Hello people.
Just got this used phone from my cousin. Apparently he have helped me upgrade to the latest ROM 1.12. But there are a few problems ive encountered.
1. The phone's speaker does not work when im making a phone call. Ringing, loud speaker all works fine. Just the internal speaker. When i plug in my wired headset, it's working but only the right side is working. ive read that if you quickly plug in and out the headset, it might work. But it hasnt for me.
2. The LED is not working properly. Unlike the Blue Angel i have, the LED does not blink at all. Only once in a while, the blue LED will blink. Nothing else.
Can someone please help me?
thanks alot.
Hello everyone, my Hermes worked a looong time very fine but now i cant hear the normal "beep" when i adjust the volume. Also i hear no conversation when i phone somebody. Alarm sound is off too. I hardresetted it once but it didn't help. The weird thing is: I can hear the ringing sound when i get a phone call?!
It looks like the other person can't hear me either, thats a bit weird because i thought this isnt a speaker but a microphone problem... Two components crashed on one day? WTF? Need help
I have seen this problem with a different htc phone.
their may be a bit of dirt across the miniusb contacts making the phone think it is connected to a headset.
plugin a mini usb cable and waggle it round a bit then test calling someone hopefully that should cure it for you.
I have a very very similar problem with my Vario II. The sound is VERY intermittent. Sometimes it rings but when I pickup there is no sound either way, from the earpiece or mic, the other person cannot hear me. Most of the time the phone just vibrates (set to Ring and Vibrate) so I know there is a message or a call coming...not that I can answer the call. Tried soft resetting it and even changing the ROM, only works for about 5 minutes then the sound is gone again.
The device only works as a phone with a blue tooth headset, the rest of the time it is just a PDA....that vibrates.
has anyone else noticed that when you recieve a sms/mms/email or w/e the sound plays through the phone even if you have headphones plugged in? So annoying to be in a library with your headphones on and txting thinking the sound will come through headphones when its not, :|
second issue is with LED Notification. I thought for the longest time it didn't work but it turns out the LED notification is the same LED used for charging; the tiny ass microscopic one that you can barely see, making LED notification retarded. There are two LEDs on the left side of the Incredible they appear to be a large blue and red LED, anyone know what these are for? I thought the LED notification would work on those LEDs, I need something bright that I can actually see for LED notification.
Mik0r said:
has anyone else noticed that when you recieve a sms/mms/email or w/e the sound plays through the phone even if you have headphones plugged in? So annoying to be in a library with your headphones on and txting thinking the sound will come through headphones when its not, :|
second issue is with LED Notification. I thought for the longest time it didn't work but it turns out the LED notification is the same LED used for charging; the tiny ass microscopic one that you can barely see, making LED notification retarded. There are two LEDs on the left side of the Incredible they appear to be a large blue and red LED, anyone know what these are for? I thought the LED notification would work on those LEDs, I need something bright that I can actually see for LED notification.
Click to expand...
Click to collapse
I don't know how this would work wiht a plugged in headset but I purchased Tell2Me for around $2.00, which works very well for blue-tooth headsets. When my headset is on, the phone/text/email is announced and read through my headset. They even have an option of voice reply.
As for the notification lights... I believe they are small because many people complained they were too big/bright and ugly. I know with many of my past HTC phones, I disabled them because they were so bright, they would light up my entire room at night.
The two "lights" you mentioned are actually light and proximity sensors.
Nine time out of 10, the phone rings and plays the ring tone but, every now and then, it rings but with no sound as if the phone's volume had been muted. (have not tried it with a different ringtone yet...).
Not done anything different with the phone apart from connecting my plantronic voyager pro +. Even with headset connected, you can still here the phone ring independently.
Have looked around on the site and it would seem that the only other experience of this is with the headphone socket which, in this instance is irrelevant.
Anyone got any ideas??
whoops, can a mod please move this thread to the general section.
Allen, a while back I was running in to an issue where my phone would lose all sound, I would only notice when a phone call would come in and I happened to notice the flashing light. It turns out that for some reason if I reboot my phone with the headset still plugged in the phone would lose its sound until I unplugged the headphones and rebooted again. I think the problem has since been resolved but I'm still in the habit of unlpugging my headphones before I reboot. By any chance are you rebooting before you notice this happening?
So since the 5.0 update whenever I have my phone on silent the blinking blue led no longer activates to indicate I have a message, email, missed call etc. I've tested this and it still works correctly while on vibrate or sound.
Does anyone else have this problem or know how to make it work again?
I'm running stock, unrooted OTA from verizon
Firehawk13 said:
So since the 5.0 update whenever I have my phone on silent the blinking blue led no longer activates to indicate I have a message, email, missed call etc. I've tested this and it still works correctly while on vibrate or sound.
Does anyone else have this problem or know how to make it work again?
I'm running stock, unrooted OTA from verizon
Click to expand...
Click to collapse
I have no idea what Google could have been thinking to want to completely change how notifications and silent vib ring are supposed to interact. Light Flow kind of patches things together, kind of. Timerific is screwed up, any sound, ringer, vib widgets no longer work. The "priority interruption" nonsense is so limited in it's function that you can't use it and it seems that's what all of the changes were supposed to be for. Every time i go into a meeting i wonder what kind of unexpected noises are going to come out of my phone!
So, try Light Flow, LED works when phone is silent.