Related
Hi,
I keep getting error (Code 43) when trying to upgrade my O2 2002 ROM to WM2003SE.
I've tried everything to get around the error, the only thing i haven't changed yet is the bootloader version. (Currently on v 5.22)
If anyone can provide some advice this would be great.
Thanks
W
Bootloader 5.22 is alright. Have it also and do not have any Problems with it.....
Have you tried another PC to do the upgrade?
Stefan
Hi Stefan,
Yeah - I have tried other machines to do the upgrade - 2 laptops and a desktop.
All report the same error.
The wierd thing for me is that it seems to be Windows XP that reports the error - I get a Code 43 error in device manager - I've attached an image of the error i get.
I've also upgraded all my laptops USB drivers, chipset, BIOS - basically everything to see if it was a problem with a version of the driver or firmware i was running but the error remains unchanged.
Everything runs just fine until Programme A wants to upload the new image - the screen where you should see the progress bar as the new ROM is uploaded - I see that screen for a split second before the Qtek reboots back into the old ROM!
Thanks for the reply
W
Code 43
Windows has stopped this device because it has reported problems. (Code 43)
You could try a different usb port and also make sure it is connected direct and not through a hub.
Yup!
Tried both my USB ports, also tried disabling the "USB Root Hub" in Device manager - I don't have a USB hub plugged into my laptop, but there is one reported in Device Manager - I guess it's internal to the PC?
I figured that if there was a hub built into the laptop that would cause the communication problems experienced by USB hubs.
I couldn't disable all the USB Root Hub instances without switching off the USB port, so i closed all the ones i could and still have the port alive.
Still got the problem - The USB Root Hub in Device Manager - you think this is the "Hub" that the upgrade documentation says will create the error?
I give up...
Thats it! Back to the Good ol T-Mobile v4 ROM.
I've done everything including downgrade my laptop to Win 98 to try USB 1 drivers for this WM 2003 SE upgrade.
I've read every research article, installed every patch, been through TechNet and MSDN libraries.
This thing will just not work!
The universe is trying to tell me something!!
usb and 98 is not the best match
some chipset require special drivers for usb to behave like via
with xp having the latest service pack is prob a good idear
HELP!
I'm a new to PPC. I've got an O2 mini, I charged the device well just now, but now when I connect the device to my computer, always says that the USB device is not operating well and windows can't recognize the device. Is there anyone could let show me what's wrong? what should I do? Thanks!!!!!
Hello,
Are you sure you have installed Active sync in your Desktop?
Regards
Carty..
Is your USB cable plugged into a front USB port on your computer??
If so, try plugging it into the back. Some front USB ports do not have enough power to recognize the MDA Compact, and you get that same "USB not recognized" error. Most back USB ports are powerful enough.
uninstall activesync ... reboot system install again ! should work
the comupter may of just seen the modem side of it it happened to me you need to go into your hardware file on your pc and delete any modems you don't recogonize (carefull you don't delete the wrong one (i exepct no responsibility if you do)) and then re install active sync v 4.1 fom microsoft site. then plug it in again good luck
Thanks all you guys. I have got this problem resolved. There is sth wrong with my cable and I have bought a new one. Noe everything is going well.
My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port. And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized. I didnt flash any rom yet and i try different cables.
I am running on windows 7 ultimate 64-bit. I try two different PC and its look it the same problem.
But the weird part is that on third PC which has also win 7 ult 64-bit it works just fine.
So i try reinstall operation system but the same problem. The computer is max 3 years old so its has for sure usb 2.0
So i am little desperate because i am not sure if its problem with computers or with the phone.
Thank you for any advice!
I always had this problem with the i9100 actually, I blame crappy usb drivers.
Kies installed? Did you also try different usb ports? Chipset and USB Drivers of mainboard installed?
yes kies installed and also try back and front usb... but same result...
and usb drivers are installed manually by windows as far as i know... or?
Bladik said:
My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port.
Standard Windows message for USB connections just means what it says .
And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized.
Download mode how and whats on the phone in download window
Connection must be to a mainboard usb port .
If your PC has Kies make sure its not running make sure USB debugging is off on phone .
Power phone off restart start Kies connect phone does Kies see phone .
If yes turn Kies off remove cable connect phone in USB mass storage mode wait for windows to install drivers . Does PC see phone in Windows Explorer .
jje
Click to expand...
Click to collapse
yes windows explorer works
and kies also but still in usb 1.0 mode...
as I said I tried back usb and also front usb... same problem...
debugging is also off...
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
I try copy some video and speed was usb 2.0 but after few seconds its get error cannot copy bla bla and windows popup : this device can run faster and it change back to USB 1... weird...
and also i try again downloading mode but the same error... usb device not recognized...
Have you always used the same USB-port?
On some pc's, they only have one or two high speed ports and the other ones are "slow".
So yeah, try an other USB port on your pc
Sent from my GT-I9100 using XDA App
OP, I am confident it is a problem with your PC, and this XDA forum won't be able to help.
Try using another USB 2 device (like an MP3 player), see if you get the same message.
Use a different computers with the SGS2, see if you get the same message.
Bladik said:
yes windows explorer works
and kies also but still in usb 1.0 mode...
Thats your PC port USB 1
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
USB port not getting enough power .
Its PC not the phone explore sees phone and Kies sees phone = USB drivers ok
USB ports are not all usb 2 check your manual .
You can try factory reset on phone this will wipe all data .
jje
Click to expand...
Click to collapse
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Bladik said:
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Click to expand...
Click to collapse
Use a mainboard USB port they are USB 2 but it matters not a jot about 1 or 2 .
jje
Hi ,the problem is that when i connect the tab to the PC usb port(1.1 and 2.0),it does nothing.i have installed the mtp usb drivers and kies,sometimes the tablet is recognized under windows explorer as "portable device",but it's random and it's not predictable,it can be detected by windows 7 even after 30min or 1 hour.The tab is clockwork modded,actually i have flashed the latest stock rom honeycomb 3.2 build P7500XWKK4.I made a screenshot of the device manager when the tab was detected last time.I tried Debug USB enable/disable,doesn't work.Why this strange behaviour?
I also run x64 and do not experience any problems. You should try testing on a different computer to rule out any problems with the device.
I see,so i tried to connect the GT to my win7 notebook and also to my pc with a clean installation of win7 64 in a separate partition and still no luck.Meanwhile i'm using SwiFTP to transfer files to the device,hope to find a solution,maybe it's a broken/defective cable or 30pin usb port damaged
Yeah, seems like faulty usb port. Should send it back
Mine is Ok too, try to uninstall the Samsung Drivers, and Kies - if you have it installed - then reboot your computer all with the TAB disconnected from your PC.
try to perform a junk clean process for your PC.
Reinstall the Samsung Drivers, and TRY!
Win7 Pro x64 is my setup, working fine.
Don't quickly jump to the conclusion of "Defective USB Port" that's very Unlikely to occur on such pro equipment, me think!
solved
Guys I've changed the suspected faulty cable with a new one,now the TAB is recognised immediatly when plugged in,Odin works perfect now,it was hit'n'miss before.FINALLY!! now i can enjoy my teb(shame on you sammy)
Nice Bet that's a relieve
Yeah 2 weeks gettin' mad,i'm stressed now!i need some fun lol ,see you m8
Ok so here's the thing. This morning when I woke up I dropped my phone on the floor and the battery flew out.Initially I thought it was nothing but later it started rebooting without any good reason. I tried restarting, it would stay on for a bit then it would go down again. I am(was) running CyanogenMod 7 on a Samsung Galaxy SI. I want to reflash it with Odin as it won't start anymore.At first it would just boot loop but now it won't even get past the first logo. The tricky part is that my PC won't recognize it , all I get is Unknown Device code 43 yada yada BS! I tried alot of drivers, I tried the have disk method with the usb driver from SDK Tools , nothing worked ! Please, give me some suggestions about what I should try more because honestly this is beyond my expertise in this domain.
androis said:
The tricky part is that my PC won't recognize it , all I get is Unknown Device code 43 yada yada BS!
Click to expand...
Click to collapse
unknown USB solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Tried those options, still Unknown Device. More suggestions ?
androis said:
Tried those options, still Unknown Device. More suggestions ?
Click to expand...
Click to collapse
code 43, has more to do with Hardware, its about your cable and PC ...so check cable, try switch to another USB port
Microsoft engineers answer
I suggest that you connect the Controller to a different USB port and check if you have the same issue.
If this does not work, you can try to uninstall and reinstall the USB controller.
To remove and reinstall all USB controllers, follow these steps:
1. Click Start, type Device manager and open device manager.
2. Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
3. Restart the computer, and then reinstall the USB controllers.
Disable and enable the USB device:
1. Click on start and type devmgmt.msc.
2. Right click on the caution sign on the USB.
3. Select disable and reboot the computer.
4. Enable the device after reboot.
Also make sure that you download and install the latest version of Software for this. Here is a link you can follow to download the Software:
http://www.microsoft.com/hardware/download/download.aspx?category=Gaming
Thanks,
Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.
Click to expand...
Click to collapse
Nothing worked. I even tried going to another PC but still I get unknown device... Is it still worth the struggle or should I just save up for a new phone ?
androis said:
Nothing worked. I even tried going to another PC but still I get unknown device... Is it still worth the struggle or should I just save up for a new phone ?
Click to expand...
Click to collapse
try and borrow another original samsung USB cable to test first, this is a major culprit, as numerous people including myself have experienced
what happens is one of the pins on the micro usb plug of rolls in and gets broken , also check your USB slot a good cleaning with a brush and alcohol would be good fro the connection ( do it when you have removed battery)
Got another USB cable still nothing... It's very weird, it's like nothing I heard off or read on the forums... Is there any method of connecting to the mobile using SDK manager ? I'm not really familiar to working with the SDK manager.
androis said:
Got another USB cable still nothing... It's very weird, it's like nothing I heard off or read on the forums... Is there any method of connecting to the mobile using SDK manager ? I'm not really familiar to working with the SDK manager.
Click to expand...
Click to collapse
was your cable an original samsung cable, IF not, many common cable do not work, due to pin configurations
For ADB, you still need connection with USB cable
Here's another thing I could try. If I go to Device Manager - Right Click on Unknown Device - Update Driver Software - Browse I can choose from a list of Samsung Drivers... The question is , which one do I have to choose for my Galaxy S ? Maybe it will work like this
androis said:
Here's another thing I could try. If I go to Device Manager - Right Click on Unknown Device - Update Driver Software - Browse I can choose from a list of Samsung Drivers... The question is , which one do I have to choose for my Galaxy S ? Maybe it will work like this
Click to expand...
Click to collapse
that was the solution given in my first post, have you not tried them all yet? samsung drivers were also attached on it and what PC software do you use XP or ?
In that link it requires your phone to be working and able to go in USB mass storage mode or debugging mode ... My phone can only stay in download mode . I use windows 7 x64 version .
androis said:
In that link it requires your phone to be working and able to go in USB mass storage mode or debugging mode ... My phone can only stay in download mode . I use windows 7 x64 version .
Click to expand...
Click to collapse
I think you have misunderstood it, there are many solutions mentioned there in, cause I am the one who wrote it ..your option was to try them all to see which one solved it
for win 7 . download this driver http://www.4shared.com/zip/0LQRmsMm/usb_driver.html and give it a go, if the other failed
Tried everything from your guide...even from the microsoft sites...Still can't get my device to be recognized...If I use the Usb driver you sent it won't let me use them even if I manually choose it for my device. Don't really know what to do more honestly other than throw it away and get another phone
http://cagnazzo.name/drupal/vista_corrupted_driverstore
Try the above, then install the Samsung drivers and then connect your device.
androis said:
Tried everything from your guide...even from the microsoft sites...Still can't get my device to be recognized...If I use the Usb driver you sent it won't let me use them even if I manually choose it for my device. Don't really know what to do more honestly other than throw it away and get another phone
Click to expand...
Click to collapse
problem is, its not the phone but its either, the micro USB slot or cable or your PC, if you have another USB cable and a lap top or a friends PC might be able to resolve your problem