Hi.
I´ve upgrated my Nike with the "clear Black" OS.
Everytime everthing works perfect.
This morning the Nike makes no sound at all. I can make phonecalls without problems, but there is no Ringtone, SMS-tone and Alarm.
Has someone an answer ???? How can i repair my Nike ?
Should i install the original o2 Rom ??
So i can bring the nike back to o2.
Where can i get the original one ???
THX
I hear about some function, but I dont know, how it enable on my Topaz.
When I turn my phone upside down during calling, it turn speaker on..
this is not a Topaz feature. it's from Rhodium... if you want it, you have to install a Topaz ROM with Rhodium dialer. I sugest TESS 3.7
here this works for me. its called touch incall screen. hope this works for u
Nice, it work! thx ;-)
sorry if this has been asked, i really couldnt find an answer to this, but im using darkstone froyo 2.2 and it works with no problems but the volume is extremely low!! is there a remedy to this? maybe the radio?
Did you run the CLRAD before booting up Android??
I have no problems with volume.. try my radio.. (See Signature)
no, i have sound, just low volume. if im on the phone i can only hear someone if im in a room with no one around. driving in the car, forget it, cant hear anything.
I was just about to ask this. I have darkstone froyo running energy rom diniks glass. Me and three coworkers are having the same issue: audio is extremely low ear piece and speaker, on the other end the person can hear extra loud like the mic is super sensitive. Using recommended radio, 2.10....56 I think it is,still using the 7/23 zimage because it is the only one that does not. go into the sod.
Any help out suggestions? Thanks in advance.
^ im having the EXACT same problem, except im not running a rom. but yeah, other person can hear me super load but i can barely hear them, and speaker phone sucks!!
The devs are working on that. Sit tight.
^ thank you =)
just a shot
I had the volume muted in windows and when i loaded android it wouldnt play from the ext speaker. I turned it up in windows and the problem is better. Since I have a stock TMOUS non HSPL ROM I do not know if it will make any difference for you though. My only problem is that I always have to answer my phone "DOMO ARIGATO" because it's Mr. ROBOTO!
i am not using an HSPL hd2. thats my other predicament though, i cannot get it to HSPL.
my phone is a 1024 US Tmo hd2 with no HSPL. it has a stock rom as well.
Here is a fix .. Q-Tip Brand cotton swab,that'll fix it
no need to be a jerk....
makomek said:
Here is a fix .. Q-Tip Brand cotton swab,that'll fix it
Click to expand...
Click to collapse
Tried that. Didn't work. Ill push a bit further in root canal...
Sent from my HTC Desire using XDA App
The volume is definitely an issue. There's no way to boost it?
Also the volume control doesn't work when in-call with earphones.
I have the same issue , very diffculit to hear
niiza said:
i am not using an HSPL hd2. thats my other predicament though, i cannot get it to HSPL.
my phone is a 1024 US Tmo hd2 with no HSPL. it has a stock rom as well.
Click to expand...
Click to collapse
Why cant you use HSPL? HSPL3 works great on the T-Mobile branded Leo.
Doesnt solve any issues with the volume, but the ability to flash other roms is nice to have especially when it comes to that robot voice issue.
Donate to the devs they work faster when they have beer
sent from my hd2 , thanks dcordes, cotulla and darkstone
try ChuckyDroidROM with darkstone's HD2Froyo v1 and radio 2.12.50.02_2
everything just work flawlessly including the calling volume , which is the loudest i've tried among all the builds.
no robotic voice , just a little echo sound for the listener's side, which doesnt matter the voice is still loud and clear .
I'm using mattc Leo, which is based on darkstone, and it also have the low volume issue.
However, mattc Leo rom is the only rom that I know of can now use bluetooth headset. With that, the volume is very good and no problem during my calls.
Sound Disappears...
Tmob stock rom 2.13
Radio 2.10
HSPL3
Problem:
-Every time I boot Android, sound is there, but low. After about 15 seconds if I run an app or make a call. The sound just disappears. I searched for related topics, nothing came out to be related.
tommy9422 said:
try ChuckyDroidROM with darkstone's HD2Froyo v1 and radio 2.12.50.02_2
everything just work flawlessly including the calling volume , which is the loudest i've tried among all the builds.
no robotic voice , just a little echo sound for the listener's side, which doesnt matter the voice is still loud and clear .
Click to expand...
Click to collapse
thanks your advice and I have tried it , still low voice during call out .
Hi all,
I just flashed my HD2 to android, all process goes smooth and let me thank you all for your contributions.
My HD2 seems working perfectly on everything except making calls and receiving calls, everytime when I make a call or receive a call, the sound I hear from the receiver was like someone speaking under the water, and the buttons on the screen also seemed not working properly. Also, the system said sometimes that the phone module is not working properly and ask me to shut it down......
The rom I am using is NexusHD2-Froyo V1.9a NAND
Hope you guys have clues on what is happening........
Wish you all happy flashing.
The sound problem in a call is I believe called "Robotic Voice", but of course, the description for it is different for everyone.
mskip said:
Robot Voice in a Call
Make a call, turn on the speaker, turn off the speaker and end the call. All should be fine after that (until you reboot that is)
Click to expand...
Click to collapse
what radio U have ?
The radio version I am using is 2.15.50.14
I'm using the same radio rom. Try the speaker phone trick above. If that doesn't work you may have to reflash the rom. Otherwise this build is awesome for me.
Sent from my Nexus One using XDA App
go for some other nand android... suggest u mdj
The speaker option mentioned above will work.
Tested the same ROM as you have and fixed it with the speaker 'trick'
When I press speaker, the phone freezes and asks me to force close the phone process. So I cannot get out of robovoice mode.
I too have 2.15.50.14 radio version...
I have a T-mobile HD2.
HSPL 2.08
Radio: 2.15.50.14
MAGLDR 1.13
EXT4 recovery
Its just few months old and i'm experiencing this weird bug..
Everytime i install a new rom be it android windows or even the stock 6.5....i'm able to hear the caller for first few calls and then i cannot get any sound from phone..but when i put my phone in SPEAKER mode its normal ..i can hear everything.
If i plug headset..i get normal sound.
But the phone inbuilt speaker doesn't function after a few calls on any rom!
There has been no physical damage to the phone...
Please Help me ..if anyone knows the possible problem
Try replacing the earpiece.. it might help.. its cheap !
Thanks for your reply ...but the thing is when I first install any ROM everything works properly (microphone, inbuilt earpiece) ..after some time both stop working the caller on other side cannot hear me and even my voice is not audible to him that means both my microphone and inbuilt earpiece don't work!..I guess replacing will not help because everything works fine in the beginning!.
Any other possibilities?!
I'm clueless
Sent from my Incredible S using xda app-developers app