ill try to sum it up best i can.
i got my new N1, everything is working fine except the wifi. after i unplug my router for 10 sec and rest it, i can connect to my wifi flawless.
but after 30 min or so, it stops working. it says its connected and has an ip and a good signal, i can also see that on my pc when i go to 192.168.0.1 . but i cant do anything with the internet on my phone, it feels like it is not connected at all because nothing works(internet wise)
my router is a dir-615 frimware version is 2.21.
i should also add that the wifi works perfect on the iphone and laptop, i also have tried disabling sleep mode for wifi, but that did not effect anything.
i need help please, this is a 600$ phone and this shouldn't be happening.
one thing i should add is that my router says the wifi mode for my phone is 11ng while the iphone and laptop are both 11g. no idea what this means, but might be important.
Related
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
Summary of problem
--------------------
The phone will connect to the Router once, and once only. Any attempt to re-connect to the wifi will result in the phone disconnecting, scanning again, then discinnecting until the user gives up. Nothing will cause the phone to reconnect (telling it to forget the connection for example). The only surefire way to reconnect is to reboot the router each time - not ideal.
Manually adding a Static IP also doesn't work - which is weird as that is how I've solved it, see below.
Scale of problem
----------------
The problem seems to be with the router and not necessarily the phone as it appears to be on a wide range of phones (Hero, Droid, Touch HD etc.). Seeing at the DG834 is the most popular router in the world, and Android is growing all the time, there are a large number of people affected.
However Iphone and Symbian phones appear to be unaffected.
Reason for the problem
-----------------------
Currently unknown, but appears to be something to do with the handshaking procedure when a device asks the router for an address (DHCP) - though as to what I don't know.
Solution
--------
1) Download an app called WiFiStatic from the App Market. WiFiStatic takes each DHCP assigned IP address and stores it in a small database to be re-applied whenever you are back in range of the same Router again. It is not an ideal solution as you may have to re-scan and re-assign if you visit a busy hotspot, but this is a two press function, so it's not that onerous.
2) Turn off your Router. Make sure the WiFi on your phone is off too.
3) With the router off, clear your Remembered WiFi connections (or at the very least the Netgear connection). Once that's done, turn the Router on again and wait until it is full back up again.
4) When the Router is fully operational again, turn on your wifi on the phone and let is scan for and connect to the Netgear Router. You may need to tell it to connect from the Wireless Settings menu on the phone.
5) The phone should now connect to the Router successfully. If it doesn't, repeat the above procedure.
6) With the phone connected to the router, fire up WiFiStatic. Check Auto Switch and Show Visual Prompt if they are not already selected, then Tap Add configuration at the bottom of the screen.
7) The IP address and other settings assigned by your router should be displayed at the top of the screen, at the bottom should be the name of your router and its MAC address. If not then tap Menu > Generate to populate the form.
8)Tap Menu > Done when everything is ok.
That's it. Now when you move into range of your Netgear, you should get connected, though it does take a bit longer than normal (the Router still wants to assign an address first before accepting the static IP). You can speed this up by changing the Device table on the router to always keep the Phone's static IP open.
This shouldn't work as all my other attempts with Static IP failed, but I've had five days now of instant connection to WiFi at home, so something has been freed up.
i can not tell you how seeing this post was like finding bin ladin in the white house. Prob would have found him twice trying to solve this WIFI problem. And the strange thing is this is the 1st phone i have had that there are so few posts about it...is everyone on that icrack? scary. cheers to you...
Thank you for posting this.
I tried this with my and it seems it doesn't make a difference for me. I still can only connect once to the router and for me to connect again i have to restart the router again. Am i missing something?
Problem is when I connect for the first time at home it works then when i leave to the office i use the wifi there and never have any problems there but when i get back home it doesn't work. Do you guys switch the wifi off manually when you are not using it?
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
bimmerboii said:
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
Click to expand...
Click to collapse
That was one of the first thing i tried....it seems i have the latest firmware.
Is this an issue for a lot of people then? Ive one of these routers and never had an issue connecting any phones to it. Had 3 nokias and 3 different android phones, currently on the x10, and they all connected fine everytime.
i have some troubles in x10i wifi connection and holp someone helps me~
------------------------------
im chinese, my x10i have had the lastest firmware but the phone cant connect the AP which set the channel is "13". but i used it long before and suddy just one day i find it dosnt work~ it cant scan(and find) the AP anymore !
then i have tried and config the router in another wifi channel(just like 1,8,11..) and the phone can scan and refind the AP.
i have tried to reload the phone's default setting,but it dont work(in channel 13)ToT
---------------------------
someone tell me why? and someone give me some suggest?
in china , lots of router's wifi channel are using "13" by default(factory setting);so, if my x10i cant works in that channel means i couldnt find the "opend APs" which in the public place(like KFC~~)
THX to help~
StampedChipmunk said:
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
<snip>.
Click to expand...
Click to collapse
Thank you! I have spent three days trying to get my phone to re-connect to a DG834v5.
Your solution has worked! I had gone as far as reserving an IP address on the router and linked it to the MAC of the phone... no dice. The phone would connect once and then never again until the router was reset. Really irritating because I have two PPPoe connections running through the router with a routing table that has to be re-loaded via telnet every time the router is reset. I was considering a new phone or a new router.
HI,
I have near the same problem.
But I found out that when I remove on the access point the hidden function ( SID ) then it works perfect.
so that is a bug in the ROM of the X10, I have the R2b026.
At the moment everone can see my Access Point but I can live with that solution.
Worked for me! Many many thanks this had been infuriating me...
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Neh, hasn't worked for me....
Stupid freakin' Netgear...
works on the HD2 aswell. Thanks alot!
Not just Netgear, maybe Android
k1sr said:
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Click to expand...
Click to collapse
I am having the same issue on my HD2 Android 2.3.4, connecting to a D-Link DIR-635. If I use Static IP, everything is fine...
WORKS! I can't believe it, finally i can disconnect and connect without having to reset my router everytime. BIG thanks man!
alright, it worked fine for the first 5-6 hours. then it went back to not connecting without rebooting the router. this problem happens only with my home router, at work i can connect fine, as well as in other places.
any thoughts or solutions? i mean it did work in the beginning, then why did it stop? shall i change my router?
P.S.: i noticed that every time i connect to my home router i get the same IP address and all the stats are the same.
After connecting to 3 different wireless connections and none of then working, I'm concluded that my wifi isn't working.
I go to settings and check wifi on, it finds the network, connects, but I lose my entire data connection for the duration wifi is turned on!
Is anyone else having this problem?
Sent from my Samsung Vibrant
I'm having the same issues with the wifi. I downloaded wifi analyzer to make sure I was on a good channel. Set it to the best channel and my signal strength is 100%. I will be able to connect for a little bit but for some reason it goes in and out, connection unsuccessful, yada yada yada. I messed with all the troubleshooting solutions for my router (dgl-4300) but nothing works. If anyone can reply with a fix or point me in the right direction, that would be greatly appreciated.
Same Issues
Any help is greatly appreciated. Data working fine when on 3G but Wifi = no data. Connection is fine, IP is fine.
UPDATE: It's working again on my home WIFI. Will have to see if it's just an "at work" issue. Hopefully IT can assist.
Same problem with Verizon MiFi
I have had ZERO problems connecting to the Linksys access points we have setup at my home and my office, but recently my work provided me with a Verizon MiFi (as well as an iPad - don't hate ) and I've had MANY issues trying to get my Vibrant to consistently connect to the MiFi.
My iPad, Motorola Droid, and Laptop have no issues connecting to the MiFi.
On my Vibrant I'm running the 2.1 stock ROM with root & the latest ClockWork recovery.
It will "connect" to the MiFi (I use quotes because I can't really tell - it AT LEAST receives an IP). But I'm unable to send and receive data. I can't even browse to the MiFi's internal configuration page .
To FINALLY get it to connect consistently I have to do some kind of random combo toggling the wifi off and back on and then turning the MiFi off and back on and it will EVENTUALLY connect and stay connected with data flowing freely.
I've customized my configuration a little bit on the MiFi so I'm going to reset it back to factory and not change the config to see if it makes a difference - because at lunch I was able to connect to my boss' MiFi with no problem. I'm thinking it may either be the phone or the mifi...
I've connected to about 10 different wireless networks with NO issues, at all. The connectivity is actually much better than my G1/Nexus.
HOWEVER, last night at a bar I was connected to their wifi, strong signal, but I was not able to use Data. I was in a very poor reception area for T-Mobile... don't think that could be an issue, bit the other places I use wi-fi that is not the case.
I just chalked it up as a fluke and moved on. Not sure what was wrong.
I had this happen to me today. I just rebooted and it went away. Toggling wifi didn't help, but I only tried it once. The phone reboots so quick I figured I'd give it a try.
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
robnil said:
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
Click to expand...
Click to collapse
I'm gonna try this.
Sent from my SGH-T959 using XDA App
So after rooting and putting a new ROM on, I am unable to connect to my home wifi. My computer, ipod, ect, all connect perfectly.
My phone will connect to any other wifi other than my homes.
Is there a setting I am missing? I have already reset the router and modem....
Try deleting the home wifi profile and adding it again.
Spermatic said:
Try deleting the home wifi profile and adding it again.
Click to expand...
Click to collapse
By deleting you mean "forget". Tried it, did not work...
Shot in the dark here but, is your home router setup only as wireless n? I know our phone are n capable but maybe for some reason yours wont connect to wireless n maybe a bad flash with new new rom. Since it connects to other networks usually they are setup for all 3 signals and thats why it connects. If yours is only setup for n maybe thats why..like I said shot in the dark but thats the only thing I can think of at the moment..check your router and see if it b,g,and n or only n. Good luck
My WiFi on the Atrix crashed all my 3 routers (ActionTec/Dlink/Linksys), sometimes after a few minutes, sometimes after several hours.
The routers needed restart after that. Also wired connections were affected.
I tried messing with static IPs and sleep mode, nothing worked!
Now I upgraded my Dlink DIR 655 from 1.11 to 1.33 (supposedly the best).
Things changed
Now my Atrix takes only itself down, the Dlink keeps working for other wireless and wired devices.
The Atrix says its connected and I get the icon with full bars, however no data is transferred. The market and other apps say network error.
I can switch connection over to my other WIfi network and all is good again.
Has anyone seen this behaviour?
Also is there an app that shows me the link mode G or N and the current link speed? I cant seem to find a good app. I would also like to see if I can lock the Atrix to G or N only. Is there such a toggle switch?
Thanks.
Update: Switched connection from Dlink to Linksys and it worked for about 30 minutes then the linkksys crashed (could not reconnect got no IP). Switched back to the Dlink, got connected, good signal but no data. Even after a phone reboot. So I think it might be still on the DLink side although I have Netflix (PS3 wireless) and another PC connecting fine. This and the VOIP mic problems (Skype etc...) bug me the most about the phone.
ive been having this same problem since i got my phone and im still having problems. its pissing me off. cant even use my netflix through the Wii to watch on the big screen
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
gnahc79 said:
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
Click to expand...
Click to collapse
centurylink is my isp. i dont know if its my router that is just crappy or my cell phone is interrupting it while the wifi is on and im trying to browse causing the routers wifi to cut everything off thats on wifi
Hey guys, I have a problem and I feel like I've tried all I can think of to try and fix it. I got both my wife and I 2 kyocera rises. We activated them and all that and got them setup on our home wifi.
Well, I noticed that my rise will work fine and surf the net fine but at random times I won't be able to access the internet (Or any internet apps) even though it says i'm connected to the network. It will work if I use that connection widget to turn off the wifi and turn it back on but then it does the same thing, says i'm connected but i'm unable to use browsers/apps. The things I have tried was: Restart the phone, Reset the modem and router, factory reset the phone (Thinking it might be an app conflict), change the router channels, and I've even setup the phone for static IP.
Nothing is working and i'm at a stand still. The weird thing though is I believe my wives phone doesnt have this problem. She doesn't surf the web as much as I do but she occasionally goes onto the phone and never complains. If it helps, the router I am using is the Netgear WNR3500L. Does anybody have any ideas I can try out?
oakleyguy89 said:
Hey guys, I have a problem and I feel like I've tried all I can think of to try and fix it. I got both my wife and I 2 kyocera rises. We activated them and all that and got them setup on our home wifi.
Well, I noticed that my rise will work fine and surf the net fine but at random times I won't be able to access the internet (Or any internet apps) even though it says i'm connected to the network. It will work if I use that connection widget to turn off the wifi and turn it back on but then it does the same thing, says i'm connected but i'm unable to use browsers/apps. The things I have tried was: Restart the phone, Reset the modem and router, factory reset the phone (Thinking it might be an app conflict), change the router channels, and I've even setup the phone for static IP.
Nothing is working and i'm at a stand still. The weird thing though is I believe my wives phone doesnt have this problem. She doesn't surf the web as much as I do but she occasionally goes onto the phone and never complains. If it helps, the router I am using is the Netgear WNR3500L. Does anybody have any ideas I can try out?
Click to expand...
Click to collapse
DNS?
MrObvious said:
DNS?
Click to expand...
Click to collapse
Nope, it won't even connect to a domains ip addresses.
Greeba rthatft
Manually set IP information on your phone and set the DNS to 8.8.8.8 (Google). Otherwise I'd recommend checking for the latest update on the Wireless router.
barski said:
Manually set IP information on your phone and set the DNS to 8.8.8.8 (Google). Otherwise I'd recommend checking for the latest update on the Wireless router.
Click to expand...
Click to collapse
I will try that and see how it is. My friend that used to work for sprint told me to disable connections optimizer as well as it has problems.
UPDATE: I thought it was working but it isn't I decided to grab my wifes phone to see if the same was happening to hers at the same time as mine and it does. Well, so it must be something wrong with my network but I'm not sure what. There's no new firmware updates either. The weird thing is, I tried my nexus 7 and my t.v.'s wifi and they both work so something is making the androids not want to stay connected or something.
Androids have this weirdness with Wi-Fi. Try disabling security.
Factory reset the router and set it back up.
I found the problem. It was intact the firmware but there was no firmware updates from net gear but then I remembered my router is open source. So I decided to try flashing tomato onto my router and now my phones aren't dropping the connection. Thanks for the help guys!