Hi,
I bought an herald not blocked to any operator, i tried to upgrade it
to WM6 but it crash during te update (don't know why).
I tried to re-flashed it with RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
but i got an invalid vendor id something like message.
I try to find a no vendor id with no success.
Please Help!!
Regards
Herc.
There are VERY much posts of people who are havig the same prob's. And yes there is a good possibility that your device is bricked. BUT wich ROM was installed on yur device? you could try these two ROM's first before messing around!
-http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
-http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
first to to is putting your device in bootloader mode: HOLD Camera and then press soft reset once. then connect to pc via USB, then run the RUU and follow the steps. good luck
Hi,
I already tried both of these roms and even more, even roms from other
models but always with the same error: INVALID VENDER ID
I think the solutions will be:
-Right or NoVendorId Rom. (Like for the prophet)
-Mtty trick but with right Commands and values
-SD Boot trick via HERAIMG.nbh well signed.
Please someone to help us
Bye
Herc.
News here??
bayxsonic said:
News here??
Click to expand...
Click to collapse
You could flash back no problem by flashing back to original shipped ROM......problem is though you need to find out which ROM came with your phone, then you need to get your hands on it.
i have made a mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i have downloaded the correct rom version from T-Mobile but it doesnt seem to work
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
as i said on the other post
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index..._Card_Flashing
hope it will work
i think you can get it from here
http://www.tm-phonedownloads.com/sd_compact3.html
if WM6 did not work.. try WM5
thanks i m downloading it...but tell me one thing if there is a software issue then why isnt ther any display i mean no backlight no display no charging led
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
i think that becuase the bootloader , ISP or one of these stuff are corrupted.. don't know.
and as i told once i got my artemis completely dead
and finally i got it fixed by putting the ARTEIMG.nbh in SD card as they said in the wiki and then by pressing the camera button and the power.
and it started flashing it as the SD card flashing but it took about 30 mins .. and there was three phases in the flashing progress which it was the first time i see.
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
Click to expand...
Click to collapse
did you flashed it by SD card or RUU?
if you used RUU try by SD card flashing
did u get the same prob? i mean the phone seems to be dead? if so...there is a hope then
well...i used RUU simply downloaded it and tried to install by setup,,, dont know about card flashing but will try
where can i find that NBH file?
do u have that .NBH file?
you have to extract the file you using a program like winrar
there will be few files.. one of them is the nbh
that's how i got the nbh file.
and about the SD card flashing is here...
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I've went through a process to basically reset my phone... Using the Titan unlocker... Then discontinued the customiztion... Had to reboot in 3 seconds before it started installing anything..
Now heres the problem... Im a noob at this basically... I'm learning..
My Bootloader right now is SPL 2.09.... Im stuck at this point.. What am I suppose to do? Update the SPL to nueSPL2.47 with the exe provided on this site? I don't know if I installed a radio. BEcause I tried to install one, and I had the TITAIMG.nbl on the root of the mogul main memory and when I boot to the rainbow screen it says Image not found.
I want to put that I-phone theme on my phone, and some other apps... I just purchased my phone yesterday..
Can someone please help me..
Most help I can give you: http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
Also, make sure your card is formatted correctly. Try using HP Format Utility or I think nue has one, but I can't think of it off the top of my head.
Yea you need to have either SPL 2.40.Olipro or HardSPL2.47, just do some searching in the lick posted above or in the titan upgrading forum
Does the Radio 3.35.4 have GPS?
Should I update?
If so.. Im going to have to reflash again and lose all my stuff huh?
Ugh... lol...
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0000
Is there any way to find the original rom or is there any way to unlock the cid and then just put any rom on it? I dont have the working pda or wm device to do goldcard method. I know there is way to do the goldcard method without the WM device but then I need a desktop or laptop with a PCI or internal cardreader installed whereas I have got a usb card reader.
can usb card reader do the goldcard method without the wm device?
any suggestion will be appreciated since it has been almost 3 years for me to get my device back to life.
regards
plz suggest.
regards
Hi mate,
All info you need is in the stickies and /or using search function. You need to unlock cid and flash custom rom. BTW tri-colour screen is called Bootloader.
Ps: there was no reason to open a new thread for that ...
hi
thanx for the reply
I have been reading the stickies but could not find
the specific soultion for my problem. can u send me a link or step by step instruction?
regards
Moved to general as this does not belong in development.
There's no need for a step by step guide, all the information is in the wiki or stickies.
hi
I have runout of options and tried almost all. still no success. I was asked to
read stickies which I did but still no use.
no one seems to be answering the question. haha
anyway I have not given up hope.
regards
Yea!! That's the spirit
I can answer to the card reader: as far as I know it has to be an on board reader, otherwise it masks/hides something with the cardid.
hi
hmmm. so that means cardreader option has gone too. haha.
anyway thanx for letting me know that.
so the only option left for me is too wait for someone to send the original
rom so that I can download it and put on my HTC P3450.
regard
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
captainstu72 said:
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
Click to expand...
Click to collapse
What's the damage if he tries all the roms, one after the other ? If there's none, gogagogi might get lucky
His phone is still CID locked. I guess it could potentially be a brick. I think, that or it won't let you flash the rom at all. I forget which - been a while!
gogagogi: Have you tried seeing if you can flash ipl/spl from SD card - never been in the position you're in so just curious.
Hi
yes it is cid locked. I did try to flash few stock roms which I thought similar to the rom I have got
on my device through usb data cable but no luck. after 2% or 3% is says invalid vendor ID. then I tried through micro sd card but same result.
then I tried unbricker rom through usb and micro sd card but same result.
even I tried to change the vendor id through a softerare called xvi32. that is
a hex reader. open the .nbh file and change the vendor id but the result was no good. it said " the file or image has been corrupted"
and I never tried to flash ipl and spl.
regards
can you give the IPL/USPL a go to see what happens? (its a link to it for you)
Also, whats was your opertor, not sure if i missed it.
hi
when I bought it, it was on T-mobile. but it was sim free. thanx for the link.
I will have a look.
regards
t-mobile uk sorry or something else?
hi
it was on T-mobile NL.(netherlands).
I did have a look at the link u sent it to me.
after reading it, I found out that Microsoft ActiveSYnc has to be green first.(connected).
whereas it can not be connected, if the device is stuck on bootloader so this option has gone too.
the only option so far is, either I find out the original rom or if I can find out some matty.exe commands which can help me unlock the CID so that I can put any rom.
matty.exe is working fine so far.
so what do u think?
regards
gogagogi:
I don't appreciate the message you have sent to my personal in box to be honest, You're lucky I am replying to you at all!
When in bootloader does it say RUU at the top right? And does it pick up USB connection? Have you tried to flash via SDCARD the IPL/SPL roms?
I have a job, a daughter, and a live out side of XDA. If I do not reply to a thread, it means I am thinking, have missed it by accident, or am simply just too busy. I do not get paid to be here, I am not a moderator, I am just a member like yourself, I do not expect to get private messages hassling me to reply to a thread.
The Elf isnt even my main device. I use a HTC Hero (Android), and have done for quite a long time now. I look in here simply to help out other people who are still using this device.
Thanks, Stu
well it does say ruu text at the right top corner and it does say usb at the bottom.
as I said it does connect through Matty.exe.
well I did not mean to disturb you. I was just wondering cuz u were replying me before and then just stopped.
so mate you just chill.
ignore any previous questions from me.
regards
OKay, as the ruu is there, you should still be able to flash a from that point - I have done this a fair few times.
Have you tried the IPL/SPL yet?
today i tried my own cooked ROM to flash from my kingston 4GB SD card.After 10 minutes i got message SD Update Failed! now my GENE is bricked.
My real problem is that my camera key isn't working hence it is not possible to go to bootloader.And also it is impossible to repair it.I have many experience flash ROMs but this time i need your help urgently.Please notify me if you have any other method to go to bootloader.I had put wince.nls in my ROM.
Thanks in advance
This forum is my last hope
can't go to bootloader?
what a tragedy!