I have posted this before a couple of days back on another thread so sorry.
Just wanted to know if there is a reg key that i can modify to get HD2 slider lock back.
A little background to the problem, i installed Cookies Home tab and now my slider lock is gone(the one that comes default with HD2). It may not be related to CHT as the folks on the other thread suggest. when i try the soft key lock button on right hand side bottom it used to lock my phone and i had to unlock it using the slide lock. Now it still gets locked but the home screen still remains and an unlock shows up at the bottom left hand side, which on tapping presents me with an ugly out of the place unlock screen and on tapping it again i am able to unlock it.
I am tempted to do a hard reset coz i like the default slider lock, however i want to give in to tweaks and try things before jumping for the extreme. Any suggestions/ bright ideas appreciated.
Thanks
P.S. I tried S2U2 but i kinda miss the default one and uninstalled it.
Sorry guys i figured out what was wrong and i have the default slider lock back!
the reason it was disabled was, my setting> lock > display was set to windows classic.
I changed it to windows default and the lock is back.
Thanks.
Related
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
what programs are you using? If you hold down the end key for a second, the phone will lock. Maybe you are accidentally bumping it when you put it in your pocket or case.
Sorry I wasn't more specific... I'm running ttran's OpenTouch 3.0. when I turn on the screen (using the power button) I need to press unlock twice to get to the main menu. It's annoying and I'd like to get rid of it. idk... I didn't change anything and it just randomly started happening yesterday. help?
I agree with you PharmacySchool...I'm running Ttran's 3.0 ROM myself and the "locked" feature pop-up on me this afternoon, out of the blue. It is very annoying and I'm not sure what caused it to start happening. Was getting an address out of the contacts list, X'ed out of contacts once finished, clicked the power button to turn the screen off...next time I went to use the phone, it magically was locked and has been since. A real pain to have to hit the unlock button twice just to use the phone. Have played around a little with it, but no success on correcting the problem yet.
Make sure you're not overclocking the phone. This can cause lock ups if the CPU overheats or if it doesn't get the required voltage or for other reasons.
The lock I'm referring to and I believe PharmacySchool...is like a "key lock". How some phones have an option to lock the keys so it can't accidentally call someone if numbers get pressed by mistake or while in your pants pockets. Nothing to do with the CPU or it being overheated. All you have to do is press the button to turn the screen light off and instantly turn it back on...it's locked. You have to hit the "unlock" button on the bottom left hand corner and the tap the unlock button on the screen. After doing such...you can once again use your phone.
I have the answer!!!
pharmacyschool said:
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
Click to expand...
Click to collapse
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
A_C 's S2U2 has a slide to answer feature..... You should check it out.
nextpimp said:
A_C 's S2U2 has a slide to answer feature..... You should check it out.
Click to expand...
Click to collapse
I've installed S2U2-0.2-WM5 with Touch It v2.3 and had problems. I think I remember it having a slide to answer but I also remember it answering with the green button as well. Maybe there was a way to disable it but I don't know how.
Does it work better Open Touch v3.0. because thats what I'm running now.
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
midas1200 said:
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
Click to expand...
Click to collapse
Midas, that fixed it. thanks a lot. I owe ya one.
nextpimp said:
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
Click to expand...
Click to collapse
NICE!!!!! Works good so far. Now I won't be divorced! LOL
I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
the only thing i can thing of is use s2u2 or any other locking app
egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay
Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?
i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.
god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.
pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!
update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)
xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought
xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither
My original screen lock has gone all of a sudden. Theres no lock icon that i can slide. Instead my phone just says ' to unlock the device tap unlock' .
Bit weird. Id like the original slider back if possible. Any thoughts?
Thanks in advance.
press the windows button on the left side of the taskbar
then go down and press lock
it starts working again...its a common bug of the newer roms.
Suddenly my lock slider disappered too. Pressing the windows button and choose lock makes it work once but when I've unlocked it with the slider and set the phone to standby it won't appear again. Help... Very annoying.
Installing the HeartofWolf lock screen might fix it.. I never had this problem but it basically moves the lock slider to the bottom of the screen. Might also keep it up always and rule out this bug in sense..
Nit3m4re said:
Installing the HeartofWolf lock screen might fix it.. I never had this problem but it basically moves the lock slider to the bottom of the screen. Might also keep it up always and rule out this bug in sense..
Click to expand...
Click to collapse
It did move the slider to the bottom (Which was nice) but it did not solve my problem that the slider won't show up when I wake up the device :-(
Which is the exact cab that i need the slide bar down? I saw a list of HeartOfWolf cabs and didn't want to experiment one after the other to make sure it worked with Sense & HD2... Cheers...
tsttse said:
Which is the exact cab that i need the slide bar down? I saw a list of HeartOfWolf cabs and didn't want to experiment one after the other to make sure it worked with Sense & HD2... Cheers...
Click to expand...
Click to collapse
The one I tried was HeartofWolf Lockscreen fix v4 transparent.cab
I was wondering how to change the background screen when my TP2 is lock. I tried downloading different themes and background and it still doesn't change. I have a tmobile with stock rom and official 6.5 upgrade. Can anyone help.
thanks.
The background of your lock screen is the background of your Today screen. That is to say, the background set for Windows Mobile 6 and not the Touch Flo 3D background.
If you want to change your lock screen background, go to the Settings tab in TF3D, press the left soft key ("All Settings"), select the "Today" icon, and at the bottom of the first tab there will be a checkbox and a browse button to select your background picture.
S2U2
You also may want to consider S2U2. It offers much more control over locking phone and pictures Give it a search and check it out.
See item 3 in the following link
http://forum.xda-developers.com/showthread.php?t=613956
Thanks alot guys. I actually went to that window/tabs but wasn't sure what it would(I'm a newbie). Thanks again
I m having a really annoying problem. When I first got my phone (tilt2) I was trying out different lock screen backgrounds and somewhere along the way the incall lock screen buttons changed to these really horrible like round custom things. I didnt install anything so I dont have a CLUE how to get them back to the default buttons that I liked. Anyone have an idea?
Hi guys,
I got CM10.1 VJ 6.1 (Android 4.2.2) on my Desire.
Recently I started to look for a screen lock, that would be the same style as the default one in this ROM (pretty much an ICS/JB default style), and would unlock the device after sliding in two ways - for example, I press the power button, the lockscreen appears, I slide on it upwards, and then back downwards, and the device unlocks. Same for sliding right, and then back left (and so on). An animation is optional, but not essential. Is there anything that could suit my needs?
The reason I want this is that with the default slide unlock I'm getting some weird pocket unlocks, and the pattern unlock sometimes gets frustrating. I don't want my device to unlock in my pocket, but I still want to have a quick way to fire it up when needed.
Cheers.
PS Sorry if I missed a thread about the same thing, I searched a few times and found no good results.