Related
Hello!
Yesterday I found myself in a very terrible situation. I spend about 6-7 hours...
It just happened that I deleted the recovery (through fastboot), and before that deleted firmware of the phone. That is, there remained only mode HBOOT (fastboot). Around the internet and google there are no guides on how to return
recovery by the alternative methods or how to flash a new ROM through
fastboot.
Thats why i want to present to you my little guide... Coz i think it will be very useful for some ppls like me with the same trouble.
So, if you're in a situation where you do not have Recovery, and the phone is not started in boot ROM then first try a standard way to flash a new Recovery through fastboot mode
Standart way of flashing new recovery via fastboot
1.Connect your phone with PC via USB and power off your phone (if it up).
2.Than start up in fastboot mode - (in my situation, fastboot mode is CAMERA+POWER, then button "send") in all other (as i know) this is starting the phone while pressing button BACK.
3.Open -> Start->Run->cmd (open command prompt in windows*) and write:
Code:
fastboot devices
Than you must see your device serial number like this:
Code:
H94XTGAMSHDY
and should say "fastboot".
If all right - go next. If not - check fastboot mode (is on?) and USB cable.
4.Than change directory via cmd to where you have saved your recovery image (NEW recovery.img !!! ALWAYS CHECK MD5 SUM)
5. Than type this :
Code:
fastboot flash recovery recovery.img [enter]
(while you are stay in the same dir where you saved recovery.img)
(if you got some error about previously version or smth like this you can try to use this: fastboot erase recovery and only than try to flash new recovery from step №5)
6.Check your phone's display, as recovery is being sent and flashed to your device. And check your command prompt/shell to make sure the process is over.
7.Reboot into recovery by holding Home and Power (before it power off device).
Thats all! You can use any recovery, all what you like. I use Amon_RA's recovery.
IF WHILE FLASHING YOU GOT :
Code:
sending 'recovery' <4594kb>... OKAY [ 1.734s]
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verigy fail>
finished. total time: 3.125
Use next steps (my Alternative method)
And IF you can't flash recovery by this method it is not big trouble as you think now
Alternative way of BOOTING new recovery via fastboot checked and founded by me
Everything here is much easier and faster!
Do not be scared as I did it yesterday
Only what you need it :
Change directory via cmd to where you have saved your recovery image (NEW recovery.img !!! ALWAYS CHECK MD5 SUM)
And than TYPE:
Code:
fastboot boot recovery recovery.img
And your phone will be rebooted about 2 seconds in RECOVERY MODE. Yes!
After this you can use your old Nand Back up (restore it) and start up your old ROM. Or you can wipe all and try to flash new ROM and many operations what you can use via recovery. When you will get working ROM and flash it - you can flash recovery via adb. Or Use Rom Manager (Not recommended!)
Why we use this method? Because if you got error while flashing - FAILED <remote: signature verigy fail> you CAN'T FLASH ANY .img. Why? I Don't know, i hope some android guru's help us with it theory
(ALL AFTER THIS LINE ALL TEXT COPYED FROM WIKI.CYANOGEN.COM CREDITS GOES TO Cyanogen. Thx you, god)
If you want to flash recovery via adb (using power on phone with working firmware) (This method working 100% but strongly need working phone with working ROM)
Working only with HTC DREAM (G1) - Attention.
adb method by cyanogen version
Restoring the custom recovery image
Download the flash_image tool (HERE LINK
Next, place the file on your desktop
Change the directory to where "flash_image" is located, e.g. in Windows: cd C:\<path-to-flash_image-location>, in Linux: cd /home/USERNAME/path/to/flash_image on a Mac: cd /Users/USERNAME/path/to/flash_image)
IMPORTANT: Turn on USB debugging. Settings -> Applications -> Development -> check the box "USB Debugging"
Open up and adb shell
With your phone booted, type the following command
s:
Code:
adb root
This will start ADB as root, or notify if it is already running as root.
Code:
adb remount
This will mount the system partition (/system) as writable, allowing the following
Code:
adb push flash_image /system/bin
This will send the flash_image script into the /system/bin, so we can use it from within the shell
Code:
adb shell chmod 0755 /system/bin/flash_image
Finally, change the permissions of the script to allow it to perform the desired action.
Now that the script is installed, we are ready to proceed with flashing the custom recovery, saved on the root of the SD card earlier:
Code:
adb shell flash_image recovery /sdcard/recovery.img
P.S. If you want i can post here method by flashing original 1.6 ADP Rom via fastboot (but as i think it is on htc dev web... But i can post here cut version of this - coz original version have many not needed things.)
Credits:
Cyanogen
all xda cool ppls
ANtiHazarD
hey ANtiHazarD i have a desire so im not sure if this is suppose to work but all 3 methods fail for me, any advice, thanks in advance
Nice steps! man hope this gets a good stick or added to the rom bible, you do know though fastboot method is a common way to flash recovery
ilostchild said:
Nice steps! man hope this gets a good stick or added to the rom bible, you do know though fastboot method is a common way to flash recovery
Click to expand...
Click to collapse
That's what I was thinking... Seems almost pointless for a guide since there's instructions how to fastboot on every recovery thread.
Either way, nicely written guide. Someone will probably find this useful.
pablo34 said:
hey ANtiHazarD i have a desire so im not sure if this is suppose to work but all 3 methods fail for me, any advice, thanks in advance
Click to expand...
Click to collapse
With a desire this is quite different, as it has an activated nand flash protection (s-on), so no fastboot flash recovery here. Although this should prevent you from not having a recovery at all...
* note: I don't have a desire (yet) so this is speculation *
Best is probably something similar to this http://forum.xda-developers.com/showthread.php?t=750852
I guess if you get the correct PB99IMG.zip for exactly your device/brand you will not need a goldcard, so don't follow the howto blindly (it is for the newer SLCD versions, but the basics will still be applicable to AMOLED devices). Best would be a PB99IMG.zip that still has a hboot version < 0.92, otherwise you will need to downgrade to root. If you already have 0.92, then just take the newest image, as older ones are normally not flashable.
After step 7 of the howto, you are either done, or you will need to find instructions to downgrade if you want to root.
As soon as you have a working system, with a 0.8* hboot you can just use unrevoked to root and flash a custom recovery.
Enough OT... @ANtiHazarD: Very useful overview. Thanks.
WAY WAY WAY more complicated than it should be...
It is a simple matter of:
fastboot flash recovery recovery.img
Done.
lbcoder said:
It is a simple matter of:
fastboot flash recovery recovery.img
Done.
Click to expand...
Click to collapse
Its not quite that simple,
1) if eng spl use fastboot instructions from RA recovery post (fastboot flash recovery recovery.img)
2) if older stock spl with fastboot ruu modes (1.33.000*) where the * is
lbcoder said:
WAY WAY WAY more complicated than it should be...
It is a simple matter of:
fastboot flash recovery recovery.img
Done.
Click to expand...
Click to collapse
maybe so
but i want to post here ALL known methods thats why so much text is here
why? coz it was a trouble and the method with
fastboot flash recovery recovery.img
not working! thats why - all ways is here.
(all pre-info into 1st post in the top)
pablo34 said:
hey ANtiHazarD i have a desire so im not sure if this is suppose to work but all 3 methods fail for me, any advice, thanks in advance
Click to expand...
Click to collapse
oh... i want to give to you some advice, but don't know what exact. because i don't have desire at my hands... and can't test.
so... thats why only - sorry
maybe there is some guide in the same way in desire section?
p.s. and thanks one more time to ezterry for old support
Can you please help me,
I have stuck here with the G1 phone,
it starts up and stucks on the G! logo.
I can get into fastboot bet have the same problem :
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verigy fail>
I get into fastboot with thre android logos on skates,
even tried to restore nandroid using fastboot but I get the same error? could you help me out?
I have HTC DREAM with 1.33.0013d and radio 2.22.27.08
I am really frustrated,
I tried all you gave up here but none worked for me.
Also when I try to get into recovery I see a G1 logo with a fastboot usb written on top left in red.
behzadbayat said:
Can you please help me,
I have stuck here with the G1 phone,
it starts up and stucks on the G! logo.
I can get into fastboot bet have the same problem :
writing 'recovery'... INFOsignature checking...
FAILED
I get into fastboot with thre android logos on skates,
even tried to restore nandroid using fastboot but I get the same error? could you help me out?
I have HTC DREAM with 1.33.0013d and radio 2.22.27.08
I am really frustrated,
I tried all you gave up here but none worked for me.
Click to expand...
Click to collapse
Did you read everything before you flashed the 1.33.0013d SPL?
If yes, you would have noticed, that this SPL is not able to flash a recovery or radio using fastboot. You have to flash the orange-...nbh file to get back a full engineering SPL, but you will loose everything you have installed on the phone ...
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.6 D/S ADS using XDA App
i don't know about this spl, but all what you can do (what i know) you can use this method which named in prev. post. with RC29 or RC7 stock firmware *.nbh
after flashing all data, radio, recovery will be reflashed by a stock data. All must be fine after this... i hope
ezterry can give for your advanced advice, may be
ANtiHazarD said:
i don't know about this spl, but all what you can do (what i know) you can use this method which named in prev. post. with RC29 or RC7 stock firmware *.nbh
after flashing all data, radio, recovery will be reflashed by a stock data. All must be fine after this... i hope
ezterry can give for your advanced advice, may be
Click to expand...
Click to collapse
Don't use RC29.. its once of the most annoying NBH files to need to re-root for the dream.
If you have 1.33.0013d note the orange.nbh posted on the new radio OP post: here
ezterry said:
If you find yourself stuck without recovery!!
Dream
1) Download: orange-1.58.73.2.nbh (MD5: aca4dee0c1ece7e9773f2ecbdfbba7c0) (mirror)
2) enter fastboot and run 'fastboot flash nbh orange-1.58.73.2.nbh'
3) wait for the entire nbh to flash
4) boot into the bootloader again (it will be an engineering SPL 1.42.2000)
5) You can now re-flash the radio/hboot/recovery via fastboot that you wish to have installed.
Click to expand...
Click to collapse
basically if you intend to still use the new radio; after installing 1.58.73.2 you can reboot-bootloader; and use my fastboot installation steps at the top of that post
You can do this without a goldcard because I bypass various checks in 1.33.0013d
(It will let you install any other signed NBH but that will still wipe the phone completely; and if it fails to flash cleanly it will leave you without an engineering SPL thus make it harder to make android go again)
hey i tried to flash the MTD too and now i keep getting "E:cant open CACHE:recovery/log" when i go into recovery . I can flash roms but when i reboot my phone my phone stays in the G1 Logo . and when it does make it to the rom i can not get my market or gapps no matter what i do . please help me guys .
EDIT: theres times when i get past the g1 logo but itll just stay on the roms boot screen forever until the phone dies . does anyone have any ideas ?
try to 'fastboot wipe system -w'
after
wipe all (data/cache, cache, dalvik, ext, stats)
and move log to sd
ANtiHazarD said:
try to 'fastboot wipe system -w'
after
wipe all (data/cache, cache, dalvik, ext, stats)
and move log to sd
Click to expand...
Click to collapse
ive never really done fastboot tho . is there any other way ?
breezy169 said:
ive never really done fastboot tho . is there any other way ?
Click to expand...
Click to collapse
It's worth learning to use it ...
Really, especially when using the 14MB-hack or CustomMTD and it's not so difficult. There should be a tutorial on adb and fastboot here in the forum.
AndDiSa said:
It's worth learning to use it ...
Really, especially when using the 14MB-hack or CustomMTD and it's not so difficult. There should be a tutorial on adb and fastboot here in the forum.
Click to expand...
Click to collapse
i agree but i just finished reading the forum that shows how to do it but it sounds so complicated .
EDIT: i ended up flashing another recovery and that solved the problem . that was the weirdest thinq ive ever seen . and honestly i thought i bricked my phone but it was a simpleee fix lol . thanks for the advice tho
I am hanging at booting while trying to do this any ideas?
Something is not right with my phone. After each reboot it boots into standard recovery, not the installed Amon RA.
In order to get into Amon RA recovery, I have to re-flash it each time. Same thing happened with Clockwork recovery as well.
The phone is rooted with OneClick successfully. I use Rom Manager in order to flash the recovery.
I were not able to find any related topic with the same issue, or maybe I am blind. All this Android moding stuff isn't that simple for a noob)
do you still have root? What's your Radio/SPL? If so, reboot in fastboot (back+power) and use fastboot to flash the recovery. Download the correct recovery for your phone and put it in your tools folder. Make sure you have ADB working (go to the development sections and look at the saphhire hacking wiki if you don't know how), check for devices by typing into a command prompt "adb devices" and it should show your phones connected via usb. Then just flash through fastboot.
You can also use the method above in one of the first posts in the general section. i just did this with my wife's phone and it worked.
This issue has been answered like 5 times by me... and PRETTY SURE more by others...
PLEASE, do a search!
Fixed. I had boot loop and recovery issue. I downgraded to cupcake, used flashrec with cyanogen mod recovery 1.4, flashed HTC 1.6 rooted update, and then cyanogen mod 4 and 6 on top of 4. Worked like charm.
Tutorial: http://forum.xda-developers.com/showthread.php?t=586363
Hi,
I have a mt3g, TMobile. CyanogenMod 6.1.0, ClockWork recovery. Used ROM Managed to flash Amon Ra recovery, since I needed to re-calibrate the battery. It asked me to pick phone model, picked Ion/MyTouch 3G. After reboot:
- Stuck on splash screen if I try to go to recovery
- When booted up - a bunch of force closures, keeps playing a ringtone over and over and...
Everything I tried to do through ROM Manager didn't help.
Any help is appreciated.
Thanks.
truss said:
Hi,
I have a mt3g, TMobile. CyanogenMod 6.1.0, ClockWork recovery. Used ROM Managed to flash Amon Ra recovery, since I needed to re-calibrate the battery. It asked me to pick phone model, picked Ion/MyTouch 3G. After reboot:
- Stuck on splash screen if I try to go to recovery
- When booted up - a bunch of force closures, keeps playing a ringtone over and over and...
Everything I tried to do through ROM Manager didn't help.
Any help is appreciated.
Thanks.
Click to expand...
Click to collapse
Do you still have root? If you can get into ROM manager, reflash clockwork recovery, then wipe cache, dalvik, and run a fix permissions. That should get you back up and running long enough to try again to flash amon ra.
Not sure if the oem spl will let you fastboot flash a new recovery but that's your most reliable bet.
It sounds like it might be time to do a full wipe and reflash anyway. Have you heard of Ohsaka's SuperWipe?
I tried reflashing Clockwork through ROM Manager. It says "root granted", "clockwork flashed" immediately. When I try to boot into recovery - I get stuck on green MyTouch screen forever. Battery pull is the only way out.
I guess the problem is that I cannot get to any recovery anymore. Any ideas?
Do you have fastboot. If so you can flash recovery from there.
kodjo said:
Do you have fastboot. If so you can flash recovery from there.
Click to expand...
Click to collapse
Can I do that through adb shell? I don't think I built fastboot.
truss said:
Can I do that through adb shell? I don't think I built fastboot.
Click to expand...
Click to collapse
Fastboot is a different mode. Boot into hboot (vol down + power I think) and then select fasboot from the menu. Then plug into computer. From a command prompt type:
fastboot flash recovery recovery.img
The recovery needs to be in your tools or platform-tools folder and named recovery.img for this to work. Otherwise it would be fastboot flash recovery c:\path\to\recoveryfilename.img. Make sense?
Link to Amon_Ra Recovery 1.7 for MT3G 32B. http://www.filefactory.com/file/caa48b0/n/recovery-RA-sapphire-v1.7.0G-cyan.img
Otherwise keep trying with ROM Manager. Might take a few attempts to get recovery to stick, even temporarily. It did for me. Flash once then flash again. There's also an option in ROM Manager settings to erase recovery prior to flashing. Check that and see if it helps.
Phateless said:
Fastboot is a different mode. Boot into hboot (vol down + power I think) and then select fasboot from the menu. Then plug into computer. From a command prompt type:
fastboot flash recovery recovery.img
The recovery needs to be in your tools or platform-tools folder and named recovery.img for this to work. Otherwise it would be fastboot flash recovery c:\path\to\recoveryfilename.img. Make sense?
Link to Amon_Ra Recovery 1.7 for MT3G 32B.
Otherwise keep trying with ROM Manager. Might take a few attempts to get recovery to stick, even temporarily. It did for me. Flash once then flash again. There's also an option in ROM Manager settings to erase recovery prior to flashing. Check that and see if it helps.
Click to expand...
Click to collapse
I appreciate your help.
When I try to flash recovery.img, I get this: error: cannot load `recovery.img`
When I try running fastboot with absolute path, I get: FAILED (remote: not allow). Is there a way to fix this?
Tried flashing through ROM Manager many times - no result.
truss said:
I appreciate your help.
When I try to flash recovery.img, I get this: error: cannot load `recovery.img`
When I try running fastboot with absolute path, I get: FAILED (remote: not allow). Is there a way to fix this?
Tried flashing through ROM Manager many times - no result.
Click to expand...
Click to collapse
Interesting... Where are you trying to flash recovery.img and getting that error? What method are you using? Are you sure you have the path to recovery.img correct?
As for fastboot, you need an S-OFF/engineering spl so I guess that's out.
What happens if you use Terminal Emulator?
su
flash_image recovery sdcard/recovery.img
Does that work? Keep at it, you have root so not all is lost. Eventually you will get there.
EDIT - make sure you rename the recovery to "recovery.img" and leave it on the root of your sdcard for my italicized instructions above to work. What ROM are you running? If flash_image doesn't work I need to know which version of the binary to give you.
Phateless said:
Interesting... Where are you trying to flash recovery.img and getting that error? What method are you using? Are you sure you have the path to recovery.img correct?
As for fastboot, you need an S-OFF/engineering spl so I guess that's out.
What happens if you use Terminal Emulator?
su
flash_image recovery sdcard/recovery.img
Does that work? Keep at it, you have root so not all is lost. Eventually you will get there.
EDIT - make sure you rename the recovery to "recovery.img" and leave it on the root of your sdcard for my italicized instructions above to work. What ROM are you running? If flash_image doesn't work I need to know which version of the binary to give you.
Click to expand...
Click to collapse
Thank you very much.
Running flash_image recovery command using adb shell a few times did the trick. I was able to boot to Amon RA recovery, wipe and flash CyanogenMod 6.1.0.
truss said:
Thank you very much.
Running flash_image recovery command using adb shell a few times did the trick. I was able to boot to Amon RA recovery, wipe and flash CyanogenMod 6.1.0.
Click to expand...
Click to collapse
Nice! Glad you got it sorted out.
Hi all, I am going to be as thorough as I can. I am rather new, and I'm stuck trying to downgrade my MT4G to froyo (PD15IMG). I have read the tutorials, and learned enough about adb to attempt this task, but I think by doing the HTC Bootloader unlocking update last week, it may be the reason I'm stuck. I follow the instructions on the tutorial, to gain temp root, until I get to the part where I should get a "#" in the command Window when I type "adb shell" but I keep getting "$" instead, although everything seems to be going ok until I get to that point.
*Also, I put the PD15IMG.zip on the root of my sd card, and start my phone in bootloader mode, and it finds the PD15IMG.zip, and a blue progress bar appears in the top right corner of my phone for about 90 seconds, it then displays "parsing PD15IMG.zip" then stops at the hboot screen and does nothing. I just select power down, then power on my phone and nothing will have been done to my phone. I guess what I need to know is, by doing the HTC bootloader unlock update (which I did before I read that it was a bad idea), can I still downgrade and root with normal methods, or will I have to do something different?
Sent from my HTC Glacier using Tapatalk
You can start differently. Since you've unlocked the bootloader, try to flash recovery directly, by downloading recovery image directly from Clockworkmod site, rebooting to FASTBOOT (adb reboot bootloader) and using the command "fastboot flash recovery your_just_downloaded_recovery.img".
If recovery flash doesn't work for you - download the 2.2.1 PD15IMG, unzip it, and flash the following 2 files from it:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase userdata
Then reboot. You should end up on 2.2.1, which is perm-rootable using the guide (Visionary for temp-root, gfree for S-OFF, and then perm-root if you want).
Then flash the recovery and the engineering bootloader.
Here is what I did, I am giving a link to pastebin as instructed, it seems to go perfectly until I try to flash the StockRom. In the meantime I will attempt what was just posted above^^^^^^^ http://pastebin.com/fYrC6tAZ
One last thing before i have to throw away my phone. I couldnt leave well enough alone. I did this "fastboot flash boot boot.img" as you stated in the post above. It was successful. I then entered this one "fastboot flash system system.img", and it failed (said the img was too big or something) so I did the "fastboot-windows reboot" command and it is now stuck on the white HTC MyTouch 4g splashscreen. Is my phone toast? My PC no longer recognizes that my phone is connected to the USB port, however I can hold the volume dwn & power button and it comes on in the hboot mode.Is there any hope?
Also, when I boot it up by vol/dwn & pwr, the Hboot screen comes up and finds the PD15IMG that is on my sd card, goes through a 1 minute or so process (a blue status bar loads in top right corner), then it just stays on the hboot. It did that before it stuck on the splash screen, but never actually wrote anything i dont beleive.
OK its letting me use FASTBOOT and here is exactly what I got when i tried to flash the 2nd file in your post above. It came from the PD15IMG.zip as you instructed:
C:\adb>fastboot flash system system.img
sending 'system' (571388 KB)... FAILED (remote: data length is too large)
finished. total time: 0.016s
Can someone please let me know if there is hope for my phone? I can communicate with it through Fastboot (on my PC) and it will boot up in hboot mode. But it WON'T go past the Tmobile/MyTouch splash screen. If I get it fixed, I promise to never touch it again until I study! I truly feel there is hope, but I think don't know enough to figure it out. I loaded the PD15IMG on my SD, and it attempts to flash it, (a blue status bar appears in top right corner and fills up in about 90 seconds), but afterwards, it still sticks on splashscreen. Is there anything I can do to fix it? Anything I can flash it with in Fastboot? Please anyone?
You mixed 2 ways, and did it completely wrong way. And you didn't attempt to flash the recovery at all.
The first part, that went well (till ./flashgc), already prepared your phone for downgrading, and you should have recognized and understood it. You don't need anything else, no flashes from bootloader or anything. All you needed was to continue - put PD15IMG.ZIP on the SD card, reboot into bootloader, and let it downgrade.
You can still do it, so please do.
---------- Post added at 06:16 PM ---------- Previous post was at 06:13 PM ----------
Once you end up on 2.2.1, please follow the "Ultimate rooting guide" from Development section, and flash Engineering bootloader.
Jack_R1 said:
You mixed 2 ways, and did it completely wrong way. And you didn't attempt to flash the recovery at all.
The first part, that went well (till ./flashgc), already prepared your phone for downgrading, and you should have recognized and understood it. You don't need anything else, no flashes from bootloader or anything. All you needed was to continue - put PD15IMG.ZIP on the SD card, reboot into bootloader, and let it downgrade.
You can still do it, so please do.
---------- Post added at 06:16 PM ---------- Previous post was at 06:13 PM ----------
Once you end up on 2.2.1, please follow the "Ultimate rooting guide" from Development section, and flash Engineering bootloader.
Click to expand...
Click to collapse
Thank for your response. I have tried doing the PD15IMG.zip by booting my phone in bootloader mode. It finds the PD15IMG.zip and then a blue progress bar appears in the top right corner of the phone, finishes in about 90 seconds, the a message appears that says "wrong zip file". I would be happy just to get my phone back on with the gingerbread 2.3.4 on it, and simply leave it alone until I know what Im doing. Is there a way to just flash the original s/w back on it? If so if you could tell me how I will not mess with it again until I study alot more. But flashing the PD15IMG doesnt appear to be working for me.
Download the file again, and check MD5SUM on it before you use it.
If it responds "wrong ZIP" - it's because the ZIP is corrupted. When you'll download a good ZIP, it'll work.
Jack_R1 said:
Download the file again, and check MD5SUM on it before you use it.
If it responds "wrong ZIP" - it's because the ZIP is corrupted. When you'll download a good ZIP, it'll work.
Click to expand...
Click to collapse
Ok you were right, the one I had the wrong MD5SUM, but i d/l the correct one, it had the correct MD5SUM, but it still gave me the "wrong zip file error". I feel like there is hope, but I cant figure this out!! Thank you for trying, is there anything else I can do? I also tried going into recovery and doing factory reset/ data wipe etc...but it continues to get stuck on the splash screen....
How did you copy the correct one to the phone's SD card, and where did you put it? You either didn't copy it to your SD card, or named it wrong, or put it in wrong location, not overwriting the older file.
In any case, if flashing PD15IMG fails for you:
Download CWM recovery from here:
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-glacier.img
Boot to bootloader.
Enter FASTBOOT.
Execute:
fastboot flash recovery recovery-clockwork-5.0.2.0-glacier.img
Boot to recovery. You should have Clockworkmod.
Download a stock rooted 2.2.1 ROM from Development section.
Flash it in Clockworkmod recovery.
Extract boot.img from this ROM.
Flash it in fastboot, using "fastboot flash boot boot.img".
Boot into the ROM.
Proceed with gfree.
OK!! I got it fixed and it all makes sense to me now! I flashed the 2.2.1 boot.img to my phone, when it still had the 2.3.4 on it. It was as simple as that. I hadnt flashed the downgrade on it when I flashed the boot.img and I guess it was a mismatch. I read your last post to extract the "boot.img" from the rom and then it clicked! Yesterday I wrote the 2.2.1 boot img. to a phone that had 2.3.4...so I found a stock 2.3.4 rom, extracted the boot.img from it a BAM! its rolling again....thank you so much....
Yes, indeed, you flashed a mismatched, older kernel to your ROM. I was suggesting that you install custom recovery and change the ROM to match your boot.img, but the other way around also works - as long as you don't need to root your phone, that is.
Jack_R1 said:
Yes, indeed, you flashed a mismatched, older kernel to your ROM. I was suggesting that you install custom recovery and change the ROM to match your boot.img, but the other way around also works - as long as you don't need to root your phone, that is.
Click to expand...
Click to collapse
Well I will soon attempt it again, however I think I need to read a little more so I can understand the concept of what I am doing. I learned a ton by making that mistake. But as soo as I got it fixed, I couldnt resist, I used revovery and flashed [ROM]:: ProjectMIUI 2.2.17 [R6]- UPDATED 2/21/12 - [Stable + Smooth from the DEV section and I have never been happier with my phones performance! I will soon try the cyanmod, but I want to chill with this rom for a week or so. Again, I appreciate your help, I learned alot.
As long as you don't mind flashing kernels separately using fastboot for each ROM you flash, you can go indefinitely and flash ROMs as much as you like with your current setup, not needing anything else. The only good reason for you to go for S-OFF would be to flash Engineering HBOOT, to be able to flash kernels from recovery directly, avoiding extra fastboot step.
Also, thanks for finally confirming that you can flash recovery using fastboot on HTC-Dev-unlocked device. There was one device that didn't allow it (I think Incredible S, but not sure), so it's good to know that on MT4G it works as it should.
I rooted through cyanogenmod method, then unrooted (went back to stock 2.2.1) with the stock P15100.zip. I had another hardware issue with my phone (microphone failing) and thought it could be software. The mic was still broken and I wanted to root again so went through cyanogen method again flashing CWM. I was able to reboot once into recovery to flash synth's ICS. When I try to fully reboot, then reboot into recovery again, I got bootloop for a minute, then eventually booted into the rom. I tried flashing 4ext and same issue. I tried flashing CWM again from app and still have the issue. I'm just guessing recovery is corrupted and it needs to be formatted and re-flashed? Anyone know how to format recovery via adb and then push cwm or 4ext?
Any help much is appreciated.
You can flash a recovery through terminal emulator. As I recall, the commands are:
su
flash_image recovery recoveryname.img
Sounds like you might be having bigger issues, though. I hope your recovery partition isn't going kaput.
Jack_R1 might have an idea.
Man, Jack_R1 is still around these parts? But as for OP, definitely sounds like your recovery is corrupt. What you want to do is if you have any fastboot/ADB knowledge is you're going to want to download the recovery.img of your choice, name it "recovery.img" then place it in your ADB folder, plug your phone in in Fastboot mode and then type in the following commands:
Code:
Fastboot devices
it should show you a number followed by "fastboot" after this type
Code:
fastboot delete recovery
it should spew out how long it took followed by "recovery deleted" or something like that.
lastly you're going to flash the recovery that you downloaded. Type
Code:
fastboot flash recovery recovery.img
That should do it! PM me if you need any other help
Yes, I still visit here
OP, what phone do you have? You're writing a wrong name for PD15IMG.
In any case, if you indeed have PD15IMG - find "root for S-OFF users" thread in Development, get the PD15IMG with CWM from there, flash it just like you flashed return-to-stock package, and boot into recovery. If it doesn't work - it means that it's not the recovery that's corrupted.
And I suspect that you're just not understanding correctly what your phone does, and/or not actually booting into recovery.
Nicgraner said:
Man, Jack_R1 is still around these parts? But as for OP, definitely sounds like your recovery is corrupt. What you want to do is if you have any fastboot/ADB knowledge is you're going to want to download the recovery.img of your choice, name it "recovery.img" then place it in your ADB folder, plug your phone in in Fastboot mode and then type in the following commands:
Code:
Fastboot devices
it should show you a number followed by "fastboot" after this type
Code:
fastboot delete recovery
it should spew out how long it took followed by "recovery deleted" or something like that.
lastly you're going to flash the recovery that you downloaded. Type
Code:
fastboot flash recovery recovery.img
That should do it! PM me if you need any other help
Click to expand...
Click to collapse
I have used adb a bit (for root with cyanogen method). I'm guessing that the delete command will reformat the recovery partition? I'll give this a go when I get home and get back to ya. Thanks for the reply! Is there a way to download the 4ext recovery img file?
Edit:
I downloaded the CWM touch img and connected to the phone in fastboot. Was able to follow your instructions, but the command is erase not delete. When I put in the delete command it came up with the instructions and was able to figure it out. Flashed recovery and I can now boot into recovery every time from fastboot, terminal, adb, and from power prompt in rom! BOOYAH! Thanks a ton!
Jack_R1 said:
Yes, I still visit here
OP, what phone do you have? You're writing a wrong name for PD15IMG.
In any case, if you indeed have PD15IMG - find "root for S-OFF users" thread in Development, get the PD15IMG with CWM from there, flash it just like you flashed return-to-stock package, and boot into recovery. If it doesn't work - it means that it's not the recovery that's corrupted.
And I suspect that you're just not understanding correctly what your phone does, and/or not actually booting into recovery.
Click to expand...
Click to collapse
Hey Jack,
I have HTC Glacier. Was a typo for the PD15IMG name. I think I have a decent understanding of the phone, and most likely have a corrupted recovery partition. Seems that instead of just flashing a recovery over a recovery, I may need to reformat the partition and then flash? I'll try flashing the file you suggest and report back. If it is not the recovery that is corrupted, what else could be the issue? Possibly an issue with the bootloader not allowing the phone to boot into recovery? Thanks for the reply.
Flashing recovery isn't copying a file. When you flash IMG through bootloader, it is flashed just like what it is - a complete image. Formatting the partition doesn't do anything, since it has no "format" - the image flashed by the bootloader contains both the structure and the data, just like a CD/DVD image does, for example.
The possible options I can think of are:
1) Your recovery partition is physically bad - unlikely.
2) Your bootloader is corrupted - could possibly lead to you being unable to enter recovery.
3) Something that prevents your phone from entering recovery - i.e. a stuck button or something - or you're doing it wrong. I'm afraid that what you're describing as "phone bootloops for a minute and then boots a ROM" isn't really a bootloop - because these phones can't get out of bootloop on their own, if booting failed once - it'll fail always. Logcat can confirm this. I believe it's just the ROM that's booting normally when you try to enter recovery, so, in this case, since you didn't specify how exactly you're trying to enter recovery - it seems like you're either doing it wrong, or when you try to enter recovery you're not getting there.
To help people help you, please write down the exact way you're using when trying to enter recovery, and if you know more than one way - try them all (from bootloader, by adb reboot recovery, directly booting without flashing by "fastboot boot", etc). And post your HBOOT version.
Jack_R1 said:
Flashing recovery isn't copying a file. When you flash IMG through bootloader, it is flashed just like what it is - a complete image. Formatting the partition doesn't do anything, since it has no "format" - the image flashed by the bootloader contains both the structure and the data, just like a CD/DVD image does, for example.
The possible options I can think of are:
1) Your recovery partition is physically bad - unlikely.
2) Your bootloader is corrupted - could possibly lead to you being unable to enter recovery.
3) Something that prevents your phone from entering recovery - i.e. a stuck button or something - or you're doing it wrong. I'm afraid that what you're describing as "phone bootloops for a minute and then boots a ROM" isn't really a bootloop - because these phones can't get out of bootloop on their own, if booting failed once - it'll fail always. Logcat can confirm this. I believe it's just the ROM that's booting normally when you try to enter recovery, so, in this case, since you didn't specify how exactly you're trying to enter recovery - it seems like you're either doing it wrong, or when you try to enter recovery you're not getting there.
To help people help you, please write down the exact way you're using when trying to enter recovery, and if you know more than one way - try them all (from bootloader, by adb reboot recovery, directly booting without flashing by "fastboot boot", etc). And post your HBOOT version.
Click to expand...
Click to collapse
Sorry if I wasn't more descriptive. I really appreciate your help and everything you have done for this community. Seems the recovery was corrupted by the 4ext app. I was able to extract the recovery.img from the 4ext download and was able to flash it via fastboot. Everything boots properly now. HBoot is 0.85.2007 FYI. Thanks again!