Related
Hi, I just bought my MDA, and i been searching n i found registry wizard, how do i install that its cab file? in my MDA? what kinds software i need on my pc, to transfer stuff? and how do i back up my whole phone or something so if something goes wrong i could always restore? can someone ask my few quesiton. thank you soo much in advance.
http://www.modaco.com/index.php?showtopic=248516
^^^ just right click on the cab file. and select cabviaacticesync. then when you sync your mda it will install. you can delete any programs off your phone in the settings.
try that. that helps for people that cant figure it out. but all you would normaly do is move the cab file to you mda.
are you using windows vista or xp? if xp, download the latest version of active sync from Microsoft.com. If using vista get the windows mobile device center from the same place. Connect by following instructions, then explore the advice and drop the .cab file somewhere on it. Pick up your phone; open file explorer; and click on the file you put there. .cab files do everything themselves.
As far as backing everything up, i dont know the best way to do it. Just put stuff on your comp, thats what i do.
oh and next time, please try and search. Other people are going to yell at you
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8
hi people
I am looking out for a software for my Vista Operating system in which i can install cab files directly from my desktop without copying it to my device n then installing it.
There r many softwares actually but none of them r vista compatible..for eg cabviaactivesync.
Any developpers intrested in helping us out
WinCE CAB installer
Here you go:
http://forum.xda-developers.com/showthread.php?p=2212896#post2212896
You can drag and drop CABs there, or ever better, associate .CAB files with it in Vista, so, all you need to do to install a CAB is a double click (while having ActiveSync on of course)
wow so fast reply.thank u so much..i hope it works on vista.
i have tried this already but not working on vista..its says file cant be accessed!!even in admin mode
AthenaLod said:
Here you go:
http://forum.xda-developers.com/showthread.php?p=2212896#post2212896
You can drag and drop CABs there, or ever better, associate .CAB files with it in Vista, so, all you need to do to install a CAB is a double click (while having ActiveSync on of course)
Click to expand...
Click to collapse
How to associate .cab files in vista so that when i double click on it..it should start installing?i have winrar in my system.i removed the .extension but if i double click on it...the openwith dialog box will open
sathya said:
How to associate .cab files in vista so that when i double click on it..it should start installing?i have winrar in my system.i removed the .extension but if i double click on it...the openwith dialog box will open
Click to expand...
Click to collapse
I am using XP, but it should be the same on Vista... when the "open with" dialog opens, select wince cab installer, and select "always use selected program to open this kind of file"
wow program works fine here on vista. much easier than copying over then opening on phone, saves space too
I just tired reinstalling vista but for no use..it gives me the same error..plzzzz some one can write a script for vista..plzz
http://www.anichillus.net/index.php?topic=21.0
I hope its ok to post a link here? I found this a while ago and it works slick on my Vista 64 but there is downloads for 32 bit vista as well.
Hi thanks for ur reply..i have windows device central edition on my pc..My problem is that i want to install .cab file directly from my pc to my pda which is not possible with device central..it can install only exe files..i hope u got my point.
any one can help me install my cab files?plzz
why cant u just put the cab files on ur device and install there? it mite be inconvenient i guess..
bapssystupr3m3 said:
why cant u just put the cab files on ur device and install there? it mite be inconvenient i guess..
Click to expand...
Click to collapse
yes u r right..its really a pain copying the files to device n installing from there..any program u know for vista..i tried many but of no use
^^this works fine for me on vista, i just right click on the cab then send to, WinCE cab installer
Doesn't work for me. Get access denied. And what's worse: you can't uninstall the damn thing.
Edit:
Found it, just remove the Send to entry and delete cabinst.exe from Windows folder.
DizzyWeb said:
Doesn't work for me. Get access denied. And what's worse: you can't uninstall the damn thing.
Edit:
Found it, just remove the Send to entry and delete cabinst.exe from Windows folder.
Click to expand...
Click to collapse
same error here..**** i donno what to do..i googled for hours but found nothing..anyone can write a script?
plzzz help
even i am getting that file access denied.what to do???
Having recently upgraded to Windows 7, I bumped into this issue as well and googled my way to this thread, but found no solutions like you guys.
It seems that all would be well if I turned off User Account Control, which, however, I don't really want to.
Thus I did more searches and found the following article:
Selectively disable UAC for your trusted Vista applications
Although the steps described in the above article did not prevent a UAC prompt from popping up, my installation of WinCE CAB Installer works now.
Hey I thought I might share this I don't think many people know this little tool but it lets you install CAB's via PC by just dragging them on this little .exe
Your phone has to be connected and then the active sync pops up and transfers + installs the cab on your device. It's very useful for me and I thought I wanna share it since I got so much from this community so far.
DrogenDiego said:
Hey I thought I might share this I don't think many people know this little tool but it lets you install CAB's via PC by just dragging them on this little .exe
Your phone has to be connected and then the active sync pops up and transfers + installs the cab on your device. It's very useful for me and I thought I wanna share it since I got so much from this community so far.
Click to expand...
Click to collapse
That's pretty cool, I've never really heard much about that program, but I do like to keep all my cab files on my storage card, and with disable cab delete enabled, it keeps all the cab files so when you flash to a new rom, you have all your cab files ready to install.
i think you can just drag a .cab using mymobiler and it will install too.
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Can anyone help? Please?!?
Same here... and i'm going mad. Seems this issue affects random cabs. I succesfully installed your same TomTom version, but I can't install G-sensor Calibrate, or even TotalCommander...
I tried to update to Project V3.3 but issue is still there with the same cabs.
Any ideas?
I also tried disabling security warning by using Schap's Advanced Config. Nothing changed.
random
as you said it is a random effect... same prb here.... but i saw something odd...
i downloaded a cab with opera installed on htc and selected "open" when it asks what to do with the file... download complete but instalation unsuccessfull.
i've downloaded the same file but saved it on the storage and after that i installed... and surprise it worked! maybe it is a memory prblm.... i don't know!
this method does'nt work with every cab
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
parlato_edoardo said:
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
Click to expand...
Click to collapse
no... just using opera from the diamond
Same problem here... I have some CABs which dont fail and some which fail... Very anoying problem
I confirm i solved my problems by downloading WITHOUT any download manager or download accelerator all cabs on my pc, then check them with 7zip, then copy to my Diamond and install.
It's a bit strange way to get cabs installed but it's a safe method.
You can also choose to use download managers or download with your pda to download cabs, but you have to check them later if they don't install and... re-download them.
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
thedino said:
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
Click to expand...
Click to collapse
I have the same problem when the device - an o2 XDA Diamond - is connected in "Disk Drive" mode.
Whenever I transfer files from a Windows Server 2003 system (w/o Service Pack) to the "Internal Storage" of my Diamond the files become corrupted on the device.
This happens with any file type, but only with larger files - they become corrupted when they are several megabytes in size.
This doesn't happen randomly, it happens every time.
Reading large files from the "Internal Storage" works without problems.
When I transfer the very same files from a Windows XP system then they are OK on the device.
Also when I transfer the files in "Active Sync" mode the files are OK, but the "Active Sync" transfers are randomly aborted and the sync is lost.
I knew I'm not the only one with that problem, but I never found any information.
The ROM is the newest official one, 1.93.207.2.
Of course the Windows Server 2003 system transfers large files to other flash storages - camera, card reader and other Pocket PCs - without any problems.
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Sorry, doesn't work for me, but I thought that it was clear. (Because I wrote all info, like Service Pack, etc.)
buffystar said:
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Click to expand...
Click to collapse
You dont understand this... The file is corrupted while transfering via USB Drive but OK if we use ActiveSync... We know how to install CAB files. there is not problem.
BTW, I have Win2000 so it might be same as mentioned 2003...
I will try on another system and see how it works.
I just installed Windows XP SP3 on my machine: SAME PROBLEM!!
thedino, what mainboard do you have and how old is it and what is its USB version (1.0, 1.1, 2.0)? I have a K7S5A with USB 1.1.
For now I have to assume that HTC produced crap and that I'm gonna send my Diamond back.
I bought an USB card for PCI and there is no problem when connecting the HTC Diamond to this card.
No data corruption at all.
So obviously it must be something with onboard USB chipsets, but it's definitely a problem on HTC's side,
else these onboard USB chipsets wouldn't work correctly with any other USB device.
jameshpg said:
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Click to expand...
Click to collapse
I had the same problem (either "installation unsuccessful" or just gets stuck during installation). I was using changescreen v2.5 for handling the display rotation. Apparently this software has a conflict with the .cab installer. It was enough to disable changescreen, then run the .cab, then re-activate changescreen again.
Hope that this helps.
maTTeo
Temporary Fix
Try this
Rename the cab file with a different extension, eg TotalCommander.cab to TotalCommander.txt. Do this on your computer.
Select the file within Windows Explorer and do the usual "Edit -->Copy" to copy the file.
Establish ActiveSync connection with your Diamond and using "File Management" select the Internal Storage of your Diamond. Then select "Paste" to paste the file into the internal storage of your DIamond. Rename the file back to having the .cab file extension by using the explorer shell you opened through ActiveSync.
Unplug Diamond from the USB and ensure ActiveSync on your Diamond is not active. Using file explorer program on your Diamond tap on the cab to install it.
The only alternative is uninstall all extra apps you have put on one by one and try to install other cabs as some of these may conflict with the cab install OR you can update your ROM from the 1.93 series to the 2 series.
Let me know if this temporary fix works. Best of luck.
Aussie