Related
should i downgrade the radio version when i want take my o2 mini to warranty?IF so,how to downgrade the radio version,i have try upgrade the rom and downgrade back,but it's there a way to downgrade the radion version? i am newbie so hope can learn more thing here sorry for my poor english. Have a nice day!
no one can help?
I can help!
The reason why the radio is not downgraded is because the ROM backup actually doesn't downgrade radio at all.
Now, the way to do it properly is to first grab whatever ROM package you want (I grabbed an Imate JAM v 1.01 ship). Then you extract the files in the .exe file to a folder. Delete all the nbf files except "radio.nbf" then use MaUpgradeUt_noID.
Basically, by deleting the other nbf files, you are only upgrading/downgrading the ROM.
TQ 4 Da Tips !
thanks friend!cheers!!
Extracting files from .exe
Hi HighPingBastard,
Call me blone ... how do you extract the files inside a .exe (rom .exe) file.
thanks
<KK>
right click on the ROM file and select extract ......
hth
jim
i would like to edit nk.nbf files (of course just for personal use).
have searched hours for an editor, but i cant find anything useful.
plz help me !
AFAIR you should only generate nbf file using "kitchen", not edit them.
jakubd said:
AFAIR you should only generate nbf file using "kitchen", not edit them.
Click to expand...
Click to collapse
are you sure ?
i found this app that allows you to edit WM 2003 nbf files (sadly it doesn´t work for 6.1 rom nbf):
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
is there an other way to edit WM 6.1 images ?
(maybe i can drop them from the device in a format that can be open)
editing nbf files
try this it works a treat and will help you understand thing a little more, Then you could read up on how to port it up a bit higher once you'v learnt how it works hope this helps be carefull when you CreatROM read the text in the dos window the "free sectors" !!!! 0??? To 0001 is good, 0001 been the full to the brim ! ( ffff???? ) is bad ! if bad do NOT flash to your device start buildOS again and unckeck something ealse read the readme or guide file carefully also explode has a kitchen out that's good search for kitchen on this site there's a assortment out there have fun REMEMBER be CAREFULL or you could brick your device however you edit a rom Most time if you screew up you can flash a 2003 shipped rom and alls well agian but if you flash a rom that's fare to big you will over wright your boot sector and that's NOT GOOD
http://forum.xda-developers.com/showthread.php?t=331636
how can i dump a ROM ?
have read xplode´s kitchen how to, but i have still some questions:
witch tool i have to use to dump a rom ?
must the device be in boot loader mode ?
must i perform a hard reset before putting the device in boot loader mode ?
thank you for you help
dump rom
wmvfan said:
how can i dump a ROM ?
have read xplode´s kitchen how to, but i have still some questions:
witch tool i have to use to dump a rom ?
must the device be in boot loader mode ?
must i perform a hard reset before putting the device in boot loader mode ?
thank you for you help
Click to expand...
Click to collapse
I think I read some thing about dumping from the device ! But it's very complicated to do and if you get it wroung then it could damage your device Buzz-dev has a program called grabit see his site it copys the rom from the device to The SD CARD as a *.bin file then you dump that instructions are there, I have attached a zip i found on this site moded a bit for myown use it will dump BA or Hima put it in C:\ and right click it select extract here PS (you need winrar it's free just search xda site for it) My decompilers not complete but should give you some idear or how it works, You say u got explodes kitchen follow his instructions and build his rom when It says put your device in boot loader DON'T. Wait untill the build is finnished Press ctrl + C then look in upgrade folder and you should find an nk.nbf copy this to Swamp395Decompiler folder so you see it with PKGTool then double click BA_Disasemble.bat when that's finnished double click PKGTool.exe then "File" "open" from menu navegate to swampy395decompiler\dump click OK read screen then When that's finnished meun "tools""build packages" you should have some missing files if you look at the one called sys it should look simaler to explodes kitchen!! Then spend some time reading xda site good luck Remember the risk is all your bla bla no responcerbility ETC
I'm learning myself ! But if i can help i will, I'v been Building My own kitchen It's getting close but not got a booting rom yet but soon I HOPE
PPS pda viet rom Don't bump so well
swampy395
It works !
i easily put the nk.nbf file in C:\Swampy395Decompiler\ and start BA Disassemble.bat
a dos window opened and dump the rom in C:\Swampy395Decompiler\dump
all files of the rom are now in this folder and i can edit them.
but i have still some questions:
-how can i make a rom out of the files in \dump ?
-how can i edit registry files ?
-is there a way to change the rom language ?
greetings from germany
editing rom
wmvfan said:
It works !
i easily put the nk.nbf file in C:\Swampy395Decompiler\ and start BA Disassemble.bat
a dos window opened and dump the rom in C:\Swampy395Decompiler\dump
all files of the rom are now in this folder and i can edit them.
but i have still some questions:
-how can i make a rom out of the files in \dump ?
-how can i edit registry files ?
-is there a way to change the rom language ?
greetings from germany
Click to expand...
Click to collapse
read these links and you'll find thing you'll have to do a lot of searches *.reg files open in notepad then save as unicode turn wordwrap off these a lot to read too much fro me to explane here these links should get you in the right area
Ps if you find any good tutorials please send me a link and as i find them i'll send to you good luck I'v been reading some 4 weeks now it's not so easy building a rom so i'v found
PPS the tools i send you copys and converts the default/user.HV files and initflashfiles.dat to swampy395decompiler folder i also posted a tool to edit initflashfiles see
http://forum.xda-developers.com/showthread.php?t=394680
search for kitchen building roms ETC you'll find thing like these
http://www.anichillus.net/index.php?topic=29.0
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
good luck let me know how get on
swampy395
swampy395 said:
read these links and you'll find thing you'll have to do a lot of searches *.reg files open in notepad then save as unicode turn wordwrap off these a lot to read too much fro me to explane here these links should get you in the right area
Ps if you find any good tutorials please send me a link and as i find them i'll send to you good luck I'v been reading some 4 weeks now it's not so easy building a rom so i'v found
PPS the tools i send you copys and converts the default/user.HV files and initflashfiles.dat to swampy395decompiler folder i also posted a tool to edit initflashfiles see
http://forum.xda-developers.com/showthread.php?t=394680
search for kitchen building roms ETC you'll find thing like these
http://www.anichillus.net/index.php?topic=29.0
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
good luck let me know how get on
swampy395
Click to expand...
Click to collapse
Just a quick thought you'v got a kitchen and a rom built in that kitchen put the rom back together as it is in the kitchen IE copy the layout you'll find some *.rug files missing download athers himalaya kitchens and read the help and guid files on how to build a kitchen and use explodes kitchen as a referance see if you can put it back together without copying files out of explodes kitchen If you manage that then you should be able to make a higher build kitchen of your own good luck
FIRST OF ALL I'M NOT RESPONSABLE OF ANY KIND OF DAMAGE OCCURRED DURING THIS PROCEDURE.
DO IT AT YOUR OWN RISK!
Ok, go on now
This guide assumes that you have already dumped your original ROM.
For how to dump your ROM, follow [email protected]'s wiki until obtain imgfs_raw_data.bin
What we need:
Official Pharos WWE ROM
tadzio tool (by tadzio)
XIPPORT tool (by bepe)
bPatch (by suracha)
HTC rom tool (by Dark Simpson) with pharos settings added by me
ROM update utility
I suggest you to create a folder for each tool (eg. C:\tadzio C:\XIPPORT C:\HTCRomTool C:\RomUpdate)
and unzip the tools in the respective folders. bPatch.exe is inside tadzio tool.
Download the official rom, right clic on "RUU_Pharos_HTC_WWE-ME_1.11.456.1_4.1.13.59_03.15.90_BLUE_Ship.exe", select "Open with WinRar" and extract RUU_Signed.nbh in "C:\tadzio"
Open a command prompt, go in "C:\tadzio" and type this command:
Code:
C:\tadzio>nbhextract ruu_signed.nbh
this tool extract the content of the .nbh file, if its all ok you should have these files now:
Code:
00_GSM.nb
01_IPL.nb
02_SPL.nb
03_MainSplash.bmp
03_MainSplash.nb
04_OS.nb
Copy 02_SPL.nb and 03_MainSplash.nb to C:\HTCRomTool and 04_OS.nb to C:\XIPPORT
ok, now we have official SPL and MainSplash ready to use but we need the OS too
To obtain exactly the original OS we need to modify some registry keys inside "boot.hv" according to our language.
This file is located in the XIP section, so we should extract the xip files from 04_OS.nb, modify boot.hv and re-inject the xip in the os.
Don't worry, we have another solution because we already have the original xip obtained from dump process ([email protected]'s wiki)
The XIP section is Part01.raw
Copy Part01.raw to C:\XIPPORT and rename it to "xip_out.bin"
Run xipport.exe, change the offset to "00313800", the filename to "04_OS.nb" (see pic01 at the end of post for detail) and press "write xip_out.bin to:"
This tool write the xip section (xip_out.bin) in the OS (04_OS.nb) at the specified address (00313800).
Now we have 04_OS.nb with our original XIP
Rename 04_OS.nb to OS.nb and copy it to C:\tadzio
Copy imgfs_raw_data.bin obtained from dump process to C:\tadzio
Open a command prompt, go in C:\tadzio and type this command:
Code:
C:\tadzio>imgfstonb imgfs_raw_data.bin os.nb os-new.nb -bigstoragemove
This tool recostructs the OS (os-new.nb) from our dumped image (imgfs_raw_data.bin)
Now we need to patch the size of OS-new.nb, to do this type this command:
Code:
C:\tadzio>bPatch.exe -1 0xFF 0x632D000 OS-new.nb
The size of patched file must be 99.1 MB (103,993,344 bytes)
Ok, our OS is ready to use!
Copy OS-new.nb to C:\HTCRomTool and run "htcrt.exe"
This tool creates and signes a .nbh file from a .nb file. I suggest you to create 2 .nbh, one for OS and Spalsh (eg. OS.nbh)
and one for SPL (eg. SPL.nbh).
Select "ROM builder" tab and fill the fields like screenshots at the end of post:
OS.nbh (see pic02 for detail)
SPL.nbh (see pic03 for detail)
Press "Build!", type the filename without extension and press "Save"
Flash OS.nbh first so if something wrong in the image and the device don't boot you'll be able to flash any other ROM; while, if it boots ok, then flash the SPL.nbh.
Copy OS.nbh to C:\RomUpdate, rename it to ruu_signed.nbh, run "ROMUpdateUtility.exe" and follow the instructions
At this point we have flashed OS and Splash, if its all ok and the device boot right, then you can flash SPL
Delete ruu_signed.nbh, copy SPL.nbh to C:\RomUpdate, rename it to ruu_signed.nbh and run "ROMUpdateUtility.exe"
That's all!! Now you have completely restored your device to its original condition.
I've tested this procedure, worked fine for me and i hope for you too
.
.
.
bye all
.
.
.
isnt there some way to find out if we can enable wifi in the startup of the os? .. then we know if its in the Pharos or not. whadoyathinkhuh? seems in the Artemis wifi is enabled by the os....
avathar behemoth said:
isnt there some way to find out if we can enable wifi in the startup of the os? .. then we know if its in the Pharos or not. whadoyathinkhuh? seems in the Artemis wifi is enabled by the os....
Click to expand...
Click to collapse
i've tried to play around this few time ago with no succes
I've configured wifi interface card throw registry hack, it appears in the network adapter list, but when i turn on wifi nothing happens...
did you use the files i posted in the wifi thread? (posted the tnetw 1251 driver and a file from the extended rom of the artemis... wifinit.exe) but kudos to you for getting a device listed in the pharos (though i looked with task manager i think in a previous rom i flashed and i saw wifi.dll or something loaded at the list of pharos devices)
poldo964 said:
FIRST OF ALL I'M NOT RESPONSABLE OF ANY KIND OF DAMAGE OCCURRED DURING THIS PROCEDURE.
DO IT AT YOUR OWN RISK!
Ok, go on now
This guide assumes that you have already dumped your original ROM.
For how to dump your ROM, follow [email protected]'s wiki until obtain imgfs_raw_data.bin
What we need:
Official Pharos WWE ROM
tadzio tool (by tadzio)
XIPPORT tool (by bepe)
bPatch (by suracha)
HTC rom tool (by Dark Simpson) with pharos settings added by me
ROM update utility
I suggest you to create a folder for each tool (eg. C:\tadzio C:\XIPPORT C:\HTCRomTool C:\RomUpdate)
and unzip the tools in the respective folders. bPatch.exe is inside tadzio tool.
Download the official rom, right clic on "RUU_Pharos_HTC_WWE-ME_1.11.456.1_4.1.13.59_03.15.90_BLUE_Ship.exe", select "Open with WinRar" and extract RUU_Signed.nbh in "C:\tadzio"
Open a command prompt, go in "C:\tadzio" and type this command:
Code:
C:\tadzio>nbhextract ruu_signed.nbh
this tool extract the content of the .nbh file, if its all ok you should have these files now:
Click to expand...
Click to collapse
Failed to pass this step with this message " 'nbhextract' is not recognized as an internal or external command, operable program or batch file"
This command was not included in your attached tadzio tool.
wittanny said:
Failed to pass this step with this message " 'nbhextract' is not recognized as an internal or external command, operable program or batch file"
This command was not included in your attached tadzio tool.
Click to expand...
Click to collapse
oops! sorry
hi
i have not imgfs_raw_data.bin ????
when i run the romupdateutility i get error "invalid vendor id"
please help
lindows said:
when i run the romupdateutility i get error "invalid vendor id"
please help
Click to expand...
Click to collapse
you need HardSPL to flash a NON official ROM
well, actually I went from a Pharos running Poldo v13 (HardSPL Mobiz) to a completely original english Pharos by simply installing Pharos Official English ROM Version 1.11.707.1 (http://forum.xda-developers.com/showthread.php?t=394721).
Now when I boot, everything is original, even the SPL is the original and not the Mobiz anymore.....
Lucky?
fmulinacci said:
well, actually I went from a Pharos running Poldo v13 (HardSPL Mobiz) to a completely original english Pharos by simply installing Pharos Official English ROM Version 1.11.707.1 (http://forum.xda-developers.com/showthread.php?t=394721).
Now when I boot, everything is original, even the SPL is the original and not the Mobiz anymore.....
Lucky?
Click to expand...
Click to collapse
are you italian?
poldo964 said:
are you italian?
Click to expand...
Click to collapse
yes, why? do I write english so bad ?
by the way, I got a question for you: from your signature now you are using your latest rom and the new radio. I now a lot of people likes your new rom very much, but somebody complains about poor battery lasting. Does this new radio improves battery issue?
Cheers
fmulinacci said:
yes, why? do I write english so bad ?
Click to expand...
Click to collapse
no no... i mean that you have a WWE ROM now, not italian... When i've bought my pharos there was an ITA ROM inside and this thread explains "how to completely restore your device to its original condition (warranty coverage)" like the title says
by the way, I got a question for you: from your signature now you are using your latest rom and the new radio. I now a lot of people likes your new rom very much, but somebody complains about poor battery lasting. Does this new radio improves battery issue?
Cheers
Click to expand...
Click to collapse
cannot confirm this, i'm working with kaiser device now... but you can test by yourself, just flash the old radio and see what happens
cu
poldo964 said:
no no... i mean that you have a WWE ROM now, not italian... When i've bought my pharos there was an ITA ROM inside and this thread explains "how to completely restore your device to its original condition (warranty coverage)" like the title says
cannot confirm this, i'm working with kaiser device now... but you can test by yourself, just flash the old radio and see what happens
cu
Click to expand...
Click to collapse
ok, I got it....however my Pharos was French (a great deal, about 150€ at FNAC in Geneva...I could not let it on the shelf), and I did not back it up before upgrading....let us hope in 1 year nothing bad will happen ;-)
Hi all,
I'm looking for the official french version. Could anyone share it or tell me where i could DL it?
Thanks all.
Hello developers,
maybe some people know, that there is a new TG01 section in this forum.
I personally own this phone and like it very much. Only the Rom that Toshiba provided us isn't very good and stable. It has many problems, that need to be solved
The friendly guys of WMPowseruser told us, that they want to try to cook a Rom for the Toshiba TG01.
But until now nothing happens, because nobody knows 100% sure what is needed to be done, to get a working Rom for the TG01 cooked...
So I decided to gain more information about the Rom Development process for WM-Phones.
I want to ask you what is needed to get a working cooked Rom for our Phone.
Do we need a Hard-SPL? Or do we need to extract the Rom out of our TG01, decrypt it so that we then can cook a new Rom?
You may notice, that I'm not an expert on this topic, so I rely on your help.
There is already a tool made by the member Cotulla to encode/decode TSW-files. http://cotulla.pp.ru/Misc.html
And it is also possible to flash every Rom that Toshiba provided us with this method:
http://forum.xda-developers.com/showpost.php?p=5405267&postcount=325
So it's possible to flash for example a german O2 Rom on an english TG01 that has the Orange UK Rom originally on it.
But I don't know if that helps us for our development.
We already gained 250$ for the development and I think that we're also able to gain even more money if it's needed!
We need serious help
I thank you in advance for your answers to this thread!
Every answer is welcome.
I also wish you a nice remaining Sunday!
Best regards,
Manuel
agree
TG01 have come to market for almost 1 year, hopping the cooked rom can be made early!
TG01
TGO1 MAIN bin file needs decrypted then it's full speed ahead
we need an experienced hacker
TG01
can the mods sticky this post we need it's full attention!!
Ok here is the acutal development status:
Progress of the Project WM6.5.3:
- With SDDL+ made by stepw we can flash any Rom on the TG01
- With Cotullas Tool we can decode/encode .tsw files
(The .tsw file is the file, that Toshiba offers to download from their homepage to update to WM6.5.3...so these .tsw files need to contain the whole OS and all system files that are needed to run the TG01)
Cotullas Tool can make a .bin file out of the .tsw file that we got from Toshiba.
But there are two problems with that:
1. We cannot be sure, that the Decoder works 100% right.
2. The .bin file we get when we use Cotullas tool seems to be not normal. We cannot extract it.
If I open it with Isobuster than I first see only the one track is included in the .bin file.
But then I let Isobuster search for more files after their signatures in the .bin file, Isobuster finds the following files:
00003808 , \Recovered File 01.mov
00112925 , \Recovered File 02.gz
00115498 , \Recovered File 03.png
00115530 , \Recovered File 04.png
00115533 , \Recovered File 05.png
00115563 , \Recovered File 06.png
00115791 , \Recovered File 07.cab
00115962 , \Recovered File 08.gz
00116325 , \Recovered File 09.png
00116351 , \Recovered File 10.cab
00116354 , \Recovered File 11.cab
00116385 , \Recovered File 12.cab
00116391 , \Recovered File 13.cab
00116417 , \Recovered File 14.png
00116420 , \Recovered File 15.png
00116421 , \Recovered File 16.gif
But for example the .cab files can't be extracted...it tells my, that the archive is damaged.
Well and we cannot be sure, that the above written files are the only content of the .bin file. Maybe Isobuster didn't find the others that are included in it...
So what we need:
- A person that understands the format of the .bin file (unencrypted .tsw file) so that we can extract the .bin file properly and get all of the system files and the OS out of it.
After that we can modify the files and create a new .bin file with the modified files included. Than we only need to encode it again, so that we have an flashable .tsw file again.
We could flash the new .tsw file with the SDDL+ made by the user stepw.
It would be very nice if someone would answer me and get in contact with me, that can help us to get a working WM6.5.3 Rom onto the TG01.
Thanks in advance!
I wish all of you a nice remaining Sunday evening!
Best regards,
DunkDream
hello,
to extract the rom, i used the raw-files.
i used "itsutilsbin"-tools. after dumping i get an extractet oem/sys-folder with known (typical) foldercontent and -structure.
here is a list of extractet raw-files
View attachment luste.zip
any lately news?
waiting...h
bird_9527 said:
waiting...h
Click to expand...
Click to collapse
The problem is in the nb0 file generated after using the cotulla tool.There are some extra bytes with checksum..i think only cotulla can make it possible.I tried manually with hexeditor..it fails..in short, we need another tool/program which can remove extea bytes, give us the normal nb0 file, which can be dumed recompiled and repacked with those removed extra bytes with the sme or modified checksum.Then we can have the custom ROM.
My Device is: I-teq X-bond equal to (Gigabyte gsmart-i64)
Its original OS is WM5 2.3 with original NB0 extention and Here is the official ROM link:
http://www.gigabytecm.com/eng/Downlo...=17&tabIndex=3
I can extract OS.NB from original file but the problem is that I do not know how to Repack and convert new OS.NB to a proper .NB0 file.
So I need your help
My Thread seems to be dead but still I did not find the answer
I google searched about the problem and I found a tool in Modaco, o2util.exe but I do not know that is a proper tool for my goal or not
Nobody here can help me?!!!
At least try to post a working link, as I can't find gsmart-i64 on gigabytecm.com or it's just gsmart-i?
Spiaatie said:
At least try to post a working link, as I can't find gsmart-i64 on gigabytecm.com or it's just gsmart-i?
Click to expand...
Click to collapse
OK Thank you very much for your reply, you are right gsmart-i is equal to gsmart-i64, so you can go ahead with it.
I already did that, but to download a ROM file I must to sign-up and IMEI is required, so I can't download ROM.
Can you upload it somewhere, like 4shared.com or Megaupload.com?
Spiaatie said:
I already did that, but to download a ROM file I must to sign-up and IMEI is required, so I can't download ROM.
Can you upload it somewhere, like 4shared.com or Megaupload.com?
Click to expand...
Click to collapse
I've sent my IMEI no. to you by private message. if u need it to upload let me know.
mechhadi said:
I've sent my IMEI no. to you by private message. if u need it to upload let me know.
Click to expand...
Click to collapse
Received your PM, downloding file now.
So step by step:
Take shippend ROM and prepare it for kitchen:
Code:
osnbtool -sp ROM.nb0
you will get two files ROM.nb0.PRE and ROM.nb0.OS.NB
ROM.nb0.OS.NB is OS.nb file you need to use on your kitchen.
After you have done ROM building with kitchen you should get OS.nb file.
Now use osnbtool to insert extra data:
Code:
osnbtool -extra OS.nb
You will get file OS.nb.EXA and now you need to make ROM.nb0 file:
Code:
copy /B ROM.nb0.PRE+OS.nb.EXA NEW_ROM.nb0
I hope this works
Thank you very much for your complete info, These days I'm on vacation.
As soon as possible I'll check the process, but I should say that the very first step for me is to convert back generated OS.nb by osnbtool to newrom.nb0 and check the file with original ROM. however I will let u know my progress and thank u again for your time and help.
Spiaatie said:
So step by step:
Take shippend ROM and prepare it for kitchen:
Code:
osnbtool -sp ROM.nb0
you will get two files ROM.nb0.PRE and ROM.nb0.OS.NB
ROM.nb0.OS.NB is OS.nb file you need to use on your kitchen.
After you have done ROM building with kitchen you should get OS.nb file.
Now use osnbtool to insert extra data:
Code:
osnbtool -extra OS.nb
You will get file OS.nb.EXA and now you need to make ROM.nb0 file:
Code:
copy /B ROM.nb0.PRE+OS.nb.EXA NEW_ROM.nb0
I hope this works
Click to expand...
Click to collapse
Thank u for your detail described process. I followed instruction and generated NEW_ROM.nb0 with generated OS.NB from the first step, but the volume of NEW_ROM.nb0 is different from original ROM.nb0, would u please tell me this is normal or I did something wrong or the generated NEW_ROM.nb0 is usable.
My problem is still persist and I can not reconvert extracted OS.nb to original ROM with nb0 extention
The most famous forum for WM is here, but still my problem has not solved.
Please somebody help!!!!!!!!!!!!
I used osnbtool to extract os.nb from original rom with nb0 extention. but the problem is I can not use osnbtool to use os.nb and generate rom with nb0 extention.
My request here is that is there any other tools that I can figure out my problem or because creator of osnbtool.exe is a chinese guy-WEISUN-, need someone chinese to ask my problem from Weisun.
thank u for your consideration and help
Still no progress?????!!!!!!!!!!!!!!!!!!!!!!!!!
Here are many chefs but no one can help.
As I know XDA forum is the best forum for WM but it seems that they do not consider any other devices except HTCs.