Possibility to disable Autoplay when connecting any audio device ? - HD2 General

Hi there,
i have an annoying behaviour on my HD2 when connecting to headset, bt a2dp and so on. I just find some articles with the same problem in the nexus forum, so i start this new thread.
If ever i plugin my headset, the sense musictab opens and with a delay of 5-10 seconds it begins to play. this is really annoying, because i hear my music and books with mortplayer. when inserting headset, after the delay, i hear my mortplayer music and the music which is loaded in my sense tab. so everytime i have to go to sensetab manually and stop playing music.
i can reproduce the same behaviour when connecting to my bt-caraudio (parrot). everytime when a2dp is connected, the music starts to play. also, i have this issue with my motorola s9 bt-headset.
does anyone have the same issue or perhaps solved this problem ?
best regards, chris

Disable the sense music tab as it seems you're not using it...

i tried this too, but then wmplayer is coming in front and wants to play.
is it wanted from htc, that everytime someone connects the earplug the music starts ? sometimes i just want to connect my earplugs while driving with my bike to answer calls. i have no intent to hear music in this situation

Hmm, doesn't do this for me. What ROM are you using?
It does so when I set S2P to do it, but not otherwise...

i use artemis 6.0 with the newset radio (9) i think. i reflashed the rom in the last minutes, so i will check if it is something with the settings i made in the last days

Hi all,
sorry to dig out such an old thread, but felt it was better then starting e new one on the same matter.
I have the same problem with my HD2 with Artemis 14 (WM6.5.5). When I connect to car kit using bluetooth. And randomly also sometime when plugging the headset, music starts palying automaticaly.
Very annoying, especially since I don't use Sense's tab as a player.
Any one found a fix / setting on this ??
thanks

Related

Bluetooth Stereo Headset w/Phone - Stop Music Restart - Help!

I have a x7500 and using Bluetooth Receiver setup with headphones and headset for phone. Good news is that all of this actually works pretty well overall. Bad news is that my MP3 music players restart automatically after I receive a phone call upon the ending of the phone call I can tell Pocket Player not to restart after the phone call and this works. However, iPlay still wants to start no matter what! Is there any way to tell the audio gateway or A2DP or ???.....NOT to restart music after a phone call ends.
I would appreciate any help on this. I have been searching forums and looking at registry entries but no success in stopping the restarting of music players so far.
that is a software compatibility issue
i have no problem listinging or watching movies via AD2P
when phone comes in, it pauses, and goes to Phone mode
when i finish talking, and hang up
it switches back to Music / Movie mode in AD2P
no restart no issues at all
using CorePlayer
i got 3 different headsets
Jabra BT8010
Moto HT820
Sony DS970
they all work perfectly
my guess is the Pocket Player you are using?
try another Audio Player software
Yes. I agree. It is a compatability issue but sometimes there are still options to exert control. So Pocket Player has option to restart after phone call but iPlay does not. Thus Pocket Player offers pretty good control in this area. However, it just so happens that iPlay has some very, very high end features that I really like but just does not have the phone handling at this time with the version that I have (although plays fine thru Bluetooth). I am hoping there might be some registry setting to tell A2DP not to try to restart music after a phone call.
Anyone ever heard of the ability to do this?
doesn't have to be a software issue. I have the same problem but with Touch Flo 3D skin. It starts playing music after the call, even if before the call I wasn't listening to the music I've tried to disable the Touch Flo 3D, but then the standard Media Player starts after the call . I have to remember to turn off the music after every call - it's driving me crazy!!

Bluetooth A2DP Lag?

Hello peeps,
I wonder if any of you folks with an HD2, use it with Bluetooth A2DP and satnav?
My predicament is this...
I am a motorcyclist, and occasionally listen to music from my HD2 via a Bluetooth A2DP helmet. It works great, with good sound quality and no skipping of music tracks using Manilla Music Player.
I also have Garmin Mobile XT, which I often use in the car, and the voice prompts and directions work great through the HD2 internal speaker.
However, if I want to use Garmin Mobile XT with my BT Helmet, it works OK, with the exception that audio coming from Mobile XT seems clipped right at the beginning. For example, the instruction:
"Drive 3.4 miles, then keep left." - which is how it would sound through the internal speaker...
...will more often than not sound like...
".(point) 4 miles, then keep left." - when heard through the helmet.
As you can imagine, it would be quite dangerous to have to keep looking at the screen to confirm instructions, and you can believe how confusing this is when actually on the road and relying on voice direction only.
I have searched thorugh all of the HD2 forums for the tags 'bluetooth' and 'audio', found some similar issues that peeps were having with music player playback stuttering and the like, and tried some of the remedies offered by other forum dweller (like the increase file cache, line rate, etc), but to no avail.
As a computer professional, I am inclined to say that the symptons seem like a buffering or issue. But obviously, I am not a cellualr expert, so I will leave the really diagnosis for the pro's here ;-P
Perhaps one other lucky HD2 owner will have experienced (and hopefully had solved) a similar issue (perhaps not with the BT helmet tho ;-P).
Thanks for taking the time to read my post, and I'd greatly appreciate any feedback anyone has to offer.
Rgds,
drkmtr
Me Too!
I'm using a Samsung SBH-650 Bluetooth Stereo Headset, and I get exactly the same thing! I've no idea about a solution, but at least you know you're not alone.
I have the same with Jabra BT530. No reaction from HTC, no solution here.
i saw once a thread about a similar problem.
there they wrote that the bt-chipset which is used by htc for the hd2 is a Broadcomchip. They told, that there are some differences between the os and the chip and something about the problem, that it switches to standby mode too early or something like this.
this could be the issue. your phone turns the chip too early in standby mode and you cant hear the whole sentence cause it needs time to turn it on again.
sorry mate, im not having a solution, but thats something i read. maybe it helps.
DN41
Bluetooth is a slow (imagine RS-232) comms protocol that was designed primarily for local audio connection. EDR (Ehanced data rate) was brought on for high data rate stereo connections.
If you want stereo audio connection, simutaneous phone connection and GPS connection running while all the associated SW packages are running in your phone, then you are asking a hell of a lot of even a 2.5Ghz laptop!
PLEASE, lets get the device in perspective......
Hello,
Sorry for my english.
I'm biker too, i'm using a Parrot BT Headset and i've got no problem.
I'm listen to music (with S2P) and using copilot live at the same time without problem.
Sometimes instead of S2P, i'm listening to webradio (with Wunderadio) and using copilot live without problem...
Listening radio or music allow that the BT channel is always up.
regards,
Thierry
i'm not a motorbiker, but i use bluetooth headset for listening music.
When wifi is on, and there is not wlan accessible, bluetooth lags every 30 seconds when trying to connect.
I'm reviving this ancient thread, cause I'm having a similar problem with my HTC Amaze and it's driving me nuts.
Sound is played back with about 2 seconds lag, very, very annoying. Never had any issues with my Motorola Droid...
Can anyone explain why this is happening and if there is a possible fix/hack?
Help?!

[Q] Music Player / Audible and Bluetooth connection

I am not really sure where this question goes or where my problem lies, but here is the gist of things. I am an avid audible listener (audio books) and I don't use my phone for music. Oftentimes when I get in my car (ford sync system) it will start audible and resume playback of my audio book. Other times, it will start the default music player, which I don't even have any music loaded on the phone and don't use the player. Is there a way to disable the music player without effecting the rest of the phone's capabilities, or to make it to where it will always default to the Audible player? Also, sometimes when i get in the car, it will start the audible player, but I get no audio until I disable Bluetooth and re-enable it. I have recently installed fission rom but the problem was the same with the stock rom.
Droid 2 Andriod 2.2.1 using Fission_2.5.7_BE_DROID2
Bluetooth is a 2010 Ford w/ sync system
Any Help?
Ok, since no one here seems to have an answer, any suggestions on where else I could post this question?
richiewrt said:
Ok, since no one here seems to have an answer, any suggestions on where else I could post this question?
Click to expand...
Click to collapse
In the Fission thread as it could be a ROM issue. I had some trouble with audio with my stereo bluetooth headset but I thought it was just the headset because it's two years old.

Problem with bluetooth/Music

Hi
First i have to say is SORRY about my english. I'm learning and i don't want to use a translator.
I have a Nexus One connected to my handsfree on my car. I have a Ford Focus. Well when i try to listen some music on it, stock music player star to play and stop, start and stop anbd i don't know why.
I have flashed many times OxygenN1 mod and for all other things the rom is perfect but i don't know why do this.
I have to say to, if i try to play music with another app it starts to play normaly while stock player is playing on the buttom so this is imposible to listen anything.
Thanks for all.
Anyone can help me?
Thanks
All I can contribute is that I am having the same problem.
I am using a Bluetooth headset to listen to podcasts - this is one of those headsets that supports the A2DP profile for playing music etc., as well as the normal headset profile for phone calls. I don't have the problem when taking calls, just when listening to music/podasts so I suspect a problem with the A2DP profile implementation.
You are probably using that same profile in your car.
I wasn't sure if it was the phone or the headset that had the issue - sounds like it is probably the phone if you are having the same issue.
For the record, i have the AT&T/Rogers Canada version of the N1, with 2.3.6.
A couple things to begin troubleshooting:
1. Try using your phone with a different vehicle. It would be helpful to try pairing your phone with a different car's Bluetooth stereo, and see if it works properly (maybe a friend with a recent car?). If that works, then the problem is with the car stereo.
2. If you have a friends with other smartphones, try having them pair with and play music through your car stereo. Hopefully a pattern would emerge: maybe your exact ROM doesn't work, maybe it's a hardware quirk in your phone itself.
3. What media players do you have installed? I occasionally have conflicts between players fighting over the Bluetooth connection; Pandora and the stock player used to fight, but now they play nice. Notably Pandora has a section in its settings that tells it whether or not to take over Bluetooth controls. This sounds like it might be the reason for your second problem (if I understand you correctly).
4. You might also want to try a different firmware, maybe one that's either closer to stock or further. Maybe try the stock firmware first, then maybe MIUI.
5. What year and model is your Focus? Sometimes (rarely) there's a firmware update for the car stereo.
If the stock player is starting and stopping by itself: first try uninstalling all other media players and see if it still happens. If it does, it might be that the car stereo is sending pause keypresses, which it shouldn't. There might be a defective button on the stereo, or maybe a quirk in the stereo firmware.
Hopefully some of this helps narrow down the problem. Let us know if you get any results, hopefully we can help find the problem!
---------- Post added at 10:13 AM ---------- Previous post was at 10:05 AM ----------
Tomaxda said:
I am using a Bluetooth headset to listen to podcasts - this is one of those headsets that supports the A2DP profile for playing music etc., as well as the normal headset profile for phone calls. I don't have the problem when taking calls, just when listening to music/podasts so I suspect a problem with the A2DP profile implementation.
Click to expand...
Click to collapse
Are you using the headset for both podcasts/music and taking calls? Or using the headset for part of it, and another Bluetooth device for the other?
I just ask because I once tried leaving my voice-only earpiece for handsfree talking while listening to music over the car stereo. I had them "working" configuration-wise (the earpiece took only calls, music went only to the stereo), but after a little bit the phone would sort of melt down and lock up. It was probably running turn-by-turn Nav at the same time that did it, still it was cool while it worked
There are certainly bugs in the A2DP and AVRCP profiles, but I understand the implementation is kind of complex and there's a lot of corner case problems. Personally, our stereo displays the artist & album names, but always says "Paused", and the title and time info and just random numbers.
About the best you can do is try to isolate your specific problem, then try to find where to file a bug report. CM is probably the most responsive but most resource-strapped for fixing corner case problems, Google is at the other extreme and never really replies to bug reports. The stack itself is written by the BlueZ group (which I can't link, you'll have to Google); I've never tried submitting a bug report there, as I suspect they wouldn't be interested in hearing from a 3rd-party Android ROM user.
This might sounds odd, but try turning wifi off and see if that solves the problem.
Sent from my Nexus One
jvi007 said:
Hi
First i have to say is SORRY about my english. I'm learning and i don't want to use a translator.
I have a Nexus One connected to my handsfree on my car. I have a Ford Focus. Well when i try to listen some music on it, stock music player star to play and stop, start and stop anbd i don't know why.
I have flashed many times OxygenN1 mod and for all other things the rom is perfect but i don't know why do this.
I have to say to, if i try to play music with another app it starts to play normaly while stock player is playing on the buttom so this is imposible to listen anything.
Thanks for all.
Click to expand...
Click to collapse
try downloading ES Explorer (this has a player built in) browse to the audio files and select play in ES media/audio, I could get music to play through this but not the stock player because it would keep stoppping after a second or two.

Bluetooth A2DP problem -- not playing through headset

Hi folks, I've been having this very frustrating problem with A2DP that I can't seem to find anywhere else on the forums.
My bluetooth headset (Nokia BH-905i) connects to my nexus 4 just fine, and I've been using it to listen to music since I get my nexus in january. But recently, every time I connect my headset, and I go to play any music or other sounds that play through the media channel, it comes out the speaker on the phone. In addition, when I use the volume slider I get the "speaker" icon instead of the "bluetooth" icon that I used to get.
My bluetooth headset has worked fine since the OTA update, it's just very recently (last week or two) that this issue has been happening.
The first time it happened, a simple reboot would fix it, now I can reboot and re-pair the headset all I want, it just won't work.
Has anyone else had this issue?
PS. I will also add that the next/previous track buttons still work, but the play/pause button DOES NOT! Very strange!!!
Am I seriously the only one with this problem?
PickleHead said:
Am I seriously the only one with this problem?
Click to expand...
Click to collapse
What music player app are you using? That could be the problem right there. I sometimes have this problem with my JVC Arsenal head unit, but usually disabling and re-enabling bluetooth does the trick. Don't have to unpair or reboot, just toggle BT on and off.
Anyone know how to get the track info to transmit? It used to work with Apollo and Pandora, but it won't work with Spotify or anything else. In fact, it doesn't work at all on the N4
I use DSub, but I've tried google music, and also any other "media" sounds don't go through the headset as well ie: Youtube, games, etc.
PickleHead said:
I use DSub, but I've tried google music, and also any other "media" sounds don't go through the headset as well ie: Youtube, games, etc.
Click to expand...
Click to collapse
have you checked the device profiles in the bluetooth menu? there is an option for phone audio, and an option for media audio, check them both
Yes I'm sure, I've also toggled them multiple times to try and get it working...
I also have this same problem. I'm using CM 10.1 nightlies
For some reason I able to pair my phone but not the audio.
In the Bluetooth settings though I only have the option for phone audio and not media audio. After checking on a couple of forums, it shows that my radio does support Bluetooth streaming through a2dp, but for some reason I cannot get it to work on my phone...
Edit:
It seems as though A2DP is broken in CM 10.1 as in stock android roms. I'm not 100% about this, but thats what it looks like.
Hi,
I do use AD2P audio a lot, and never had this issue (Sony MW1).
I m using exclusively AOSP or AOKP based roms (never use stock CM 10.1 because of how silly big is the navbar), but I can give it a shot during my next flashing session for testing
I don't have any problem pairing the audio. The checkbox goes and the headset actually beeps. It's connected, android just isn't sending the audio to the headset.
Me too
PickleHead said:
I don't have any problem pairing the audio. The checkbox goes and the headset actually beeps. It's connected, android just isn't sending the audio to the headset.
Click to expand...
Click to collapse
I've got the same issue.
I have tried with both jawbone and jabra headsets, no joy.
If I toggle bt on/off/on, connect the headset and then try playing music immediately I get ~1 second of audio over bluetooth before it goes silent.
I'm currently on PA 3.15 with moles kernel, but am going to try some other kernel/rom combos.
if anyone knows which logs i should be looking at i'm happy to upload them
Not quite the same problem, my music plays out of the phone speaker. Also I'm running stock rom.
PickleHead said:
Not quite the same problem, my music plays out of the phone speaker. Also I'm running stock rom.
Click to expand...
Click to collapse
If i wait more than 1 or 2 seconds after connecting my headset it comes out of the speaker also, as the bt media connection dies. I only get the little bit of audio if i hit play right after I connect the headset
I managed to find a very strange work around...
I installed this app: https://play.google.com/store/apps/...sImNvbS5tYXhpc3Rhci5tb25vYmx1ZXRvb3RoZnJlZSJd
I turned on the app, and I could listen to music over mono mode (which sounds AWFUL). I then turned the app off, and when I changed the volume with the volume buttons I noticed the volume bar was displaying the bluetooth icon instead of the speaker icon.
My app was playing music, I didn't hear anything, but my headset was still outputting the characteristic 'hiss' of being in mono mode. So I went into the bluetooth settings and turned off mono mode, and now it is playing music through A2DP finally... We'll see if this problem occurs again and I'll see if the same process fixes it again. I'm just glad it's finally working again without resetting my phone.
I just wanted to update my post for anyone else who might have this problem in the future. I've performed this fix once before my last post and I haven't had to do it again, I've also uninstalled that app and everything is still working great.
It worked for me too!
Thanks to PickleHead and his workaround I'm listening again.
Thanks!!!
Media audio VS. Call Audio
Hi,
I have Samsung galaxy S3 with android 4.1.2 connected to my fordAudio BT device.
I am playing music using the original media player that came with the Android.
The BT connects quickly, but I can't hear the media I'm playing.
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Does this helps to understand the issue?
Hi,
I have Samsung galaxy S3 with android 4.1.2 connected to my fordAudio BT device.
I am playing music using the original media player that came with the Android.
The BT connects quickly, but I can't hear the media I'm playing.
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Does this helps to understand the issue?
Click to expand...
Click to collapse
I think that is a different issue.
Thanks to PickleHead and his workaround I'm listening again.
Thanks!!!
Click to expand...
Click to collapse
I'm glad I could help mrjole. This was a very frustrating issue, I could not listen to my music for about a month!
Bluetoot Media Audio failing
PickleHead said:
I just wanted to update my post for anyone else who might have this problem in the future. I've performed this fix once before my last post and I haven't had to do it again, I've also uninstalled that app and everything is still working great.
Click to expand...
Click to collapse
I'm having exactly the problem described here, but this solution doesn't work for me. I have a Galaxy S4 and the bluetooth media audio sometimes works when I boot the phone up, but later it doesn't work. I tried this MonoBluetooth app and it doesn't seem to help. When I tell it to turn on the the mono signal, it says the media is disconnected even though the bluetooth module says it is connected to the AD2P device with media audio. On cases where it does connect, it seems to work, but in that case the bluetooth works with out this app fine.
I'm running 4.2.2 and see this on both the MDK and ME7 code base. I'm looking for a good soluton. I tried the Bluetooth Fix Repair on Google Play, but it can't seem to find my bluetooth configuration folders.
selicoh said:
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Click to expand...
Click to collapse
I have had exactly this problem for a couple of days with my S4 connected to my Jabra Freeway car speaker. Also in my case, disabling call audio makes the music pass through, but then I can't use the phone via the speaker which is sort of the whole purpose of the thing!
But I just found a simple workaround: I simply called my phone from another phone to check that phone audio passed through with both options enabled. It did. But it also cured the problem: After the call, media audio worked again - with both options checked.
marlar said:
I have had exactly this problem for a couple of days with my S4 connected to my Jabra Freeway car speaker. Also in my case, disabling call audio makes the music pass through, but then I can't use the phone via the speaker which is sort of the whole purpose of the thing!
But I just found a simple workaround: I simply called my phone from another phone to check that phone audio passed through with both options enabled. It did. But it also cured the problem: After the call, media audio worked again - with both options checked.
Click to expand...
Click to collapse
I'd be interested to know if this fixes the problem for any length of time. Occasionally, and usually after a reboot, I can use the media audio, but then it fails when I try it again. Fiddling with the connections and apps sometimes makes it come back on, but usually only for a short while. While it is connected, it seems to stay connected.

Categories

Resources