Problem... - G1 General

I just flashed a theme on top of a theme and now I am getting a black screen, lol. It says the Android logo and than after goes to a black screen. How would I go about fixing this?

reflash the rom.

Yeah what a simple solution. Thanks, lol.

That's why we always say make a nandroid before flashing.

Yeah nandroid backup never works on my phone for some reason.

Related

Nexus one hangs and freezes at startup.

Hey Guys
My Nexus one hangs at the startup screen and I can't seem to get it to start. So far, I have tried going into the quick boot screen and clearing the factory settings (i.e hard reset) but it did not change anything. I am bit out of ideas.
Did you do a nandroid, if so revert back to it and proceed forward from there.
sorry, I didn't do an nandroid. Can I do that now?
alright, I installed a recovery image and can enter the menu listed here.
Cyanogen's recovery source based on Amon_RA's post.
I restore the setting just fine but then when I reboot the phone still hangs. Is there another step I am missing? Is just having the recovery tool not enough? How do I restore the original settings?
same problem here did you manage to fix it ?
Same problem here. I have tried everything but I cant make it past the " X " - looking splash screen. If its of any help, the splash screen is STATIC.
Thanks in advance.
it almost sounds like either a bad flash or a bad wipe, if you made a nandroid, try resotring it. If you have not rooted or loaded any roms then the problem may be hardware side.
think the mobo is acting funny, i sent mines in for repair due to t his issue, but unlocked bootloader makes me pay $194..... im trying to figure it out before i pay as a last resort!

Help Mytouch 3g

I have a mytouch 3g original. I just rooted it with CM, the latest update. I tried flashing with Sirmez-p_s_blue-V4.0 (hxxp://forum.xda-developers.com/showthread.php?t=569160 )(replace xx with tt) i moved zip file to sd card. unmounted phone. Turned off phone. Held Home and Power bringing me to the Android System Recovery menu..... Moved to apply any zip from sd...Clicked the zip file pressed home to confirm. Went through the installation.. pressed reboot system now...... Then it sticks on the Mytouch 3g green screen.
This was my whole process without missing a step. I found i can still get into my recovery menu. i wiped/factory reset. then went to reboot not success still green screen of death.
Tried to reboot last backup again no success.
Now i have a phone stuck on The mytouch 3g green screen of death
Can Anyone Help me Please???
If you really try to think about it... ooh boy my common senses are tingling!
jr8801 said:
i wiped/factory reset. then went to reboot not success still green screen of death.
Tried to reboot last backup again no success.
Click to expand...
Click to collapse
you just wiped your phone. Install the rom again........
It looks like an outdated thread, I don't see your file anywhere but I'm assuming that you applied a 4.2.12.2 theme on your 4.2.15.1 rom. *Please tell me you didn't do that and wonder why your phone didn't work* I hope that theme file was for 4.2.15.1!
Alright thank you for the quick reply. further looking i did apply an older theme. does that mean my phone is bricked?
Alright i just reinstalled the Sappimg.nbh from the wiki CM page and this worked. sorry for being dumb i just freaked out when my phone wasnt booting. all is good now thank you Kawata

Weird Issue. I seem to have 2 roms flashed at the same time!!

I have been using Rubix Focused 1.8.9 on my DX for a weeks or so and I was super happy with it. I have been getting a little ROM crazy though and had been reading up on Tranquility 3.5.1 and it seemed pretty cool so I decided to try it.
I think I messed something up in the install process because things were FCing left and right and it was just super laggy. So I decided to restore my nandroid backup that I had made right before installing Tranquility.
I was doing all this on a bus so I didn't realize that my batter was pretty low. Well halfway through my nandroid restore my batter died. Suffice it say that I was freaking out.
I got home and booted the phone and got the Tranqulity splash screen, followed by the Rubix splash screen. Then the phone booted up into Rubix exactly like it was in the backup.
I have no idea what is going on. I dont really mind the splash screens but I am afraid there may be some issues if there are files from both installs running at the same time.
Should I try restoring the backup again and let it go all the way through or do I have nothing to worry about?
Actually - and you can correct me if I am wrong - you got the tranquility boot logo and the rubix flash screen? If that is correct - you don't really need to worry about it. For whatever reason - the nandroid does not over write the boot logo.
I actually performed and sbf and when I rebooted my phone I still had my custom boot logo! It actually kind of bothered me. I thought the whole purpose of an sbf was to COMPLETELY restore your phone to its factory state.
So anyways - I wouldn't worry about it too much. I know it would drive me crazy to have the "wrong" boot logo. Here is a link to a thread with tons of boot logo's to choose from...
http://www.droidforums.net/forum/droid-x-hacks/91707-droid-x-custom-boot-logo-ill-create.html
good luck.

Samsung splash screen but no home???

I just installed TitaniumBackup (paid) and Clockworkmod and was playing around. I used odin as directed and was able to backup my current ROM. I then installed Froyo and it worked. I played with it a little bit then decided to go back to 2.1. I installed Clockworkmod and then tried to recover back to 2.1. Now when it boots up I hear the verizon sound and it seems normal, but all I can see is the black screen with 'SAMSUNG' in white.
Any ideas how to resolve this???
thanks,
JD
Nevermind. I think I fixed it
JD

Just flashed 3 mods and now my phone wont load?

I just flashed the 2.1 update for trigger, the matte theme, and the accurate battery mod in clockwork. now my phone will load to the homepage for about 10 seconds and then go back into the loading animation (the one you get wen you turn on your phone) and it keeps doing this. what should i do? i already tried restarting.
If you'd saved a nandroid backup you could restore from clockwork recovery. Might have to have a close personal conversation with Odin3 if not.
masterotaku said:
If you'd saved a nandroid backup you could restore from clockwork recovery. Might have to have a close personal conversation with Odin3 if not.
Click to expand...
Click to collapse
i cant get into clr. any idea on what i did wrong?
ok so i was able to get into clr and then i did a factory reset. i reinstalled the original trigger 2.0.1 rom with nothing else. i do want to be able to install the 2.1 trigger and the accurate battery mod. this time what should i do differently?
alecjake said:
ok so i was able to get into clr and then i did a factory reset. i reinstalled the original trigger 2.0.1 rom with nothing else. i do want to be able to install the 2.1 trigger and the accurate battery mod. this time what should i do differently?
Click to expand...
Click to collapse
Well it sounds you flashed all of them together. What I would do is just flash the 2.1 ROM, rebbot and let it sit for about 10min. Then I would flash each mod individually, rebooting after each flash
alecjake said:
I just flashed the 2.1 update for trigger, the matte theme, and the accurate battery mod in clockwork. now my phone will load to the homepage for about 10 seconds and then go back into the loading animation (the one you get wen you turn on your phone) and it keeps doing this. what should i do? i already tried restarting.
Click to expand...
Click to collapse
you cant flash a battery mod and a theme together.
You can but its not recomended, as you can see the results can leave you stuck in a boot loop.
When you flash a battery mod, it changes the entire framework-res.apk.
When you flash a theme, it does the samething, so unless they are totaly compatible you shouldnt flash both.
When you flashed the theme, you changed the framework-res.apk and then when you flashed the battery mod, it probly removed some changes made to the original framework that was changed when you flashed your theme, causing you to be stuck in a bootloop.
It was the matte theme, it's not ready for 2.1 yet.
Sent from my SGH-2
Yeah what the above posts said... sorry guys I should be more clear on what is and isn't okay to flash for those who don't know.
Sent from my SGH-T959 using Tapatalk
this is typically indicative of an .xml-.png mismatch......if you dont have a nandroid backup, youll have to wipe and start fresh
for the future....when you are applying themeing mods (just changes to framework-res.apk) what i like to do is just use RootExplorer to backup framework-res.apk only, just in case before i mod. that way if something goes wrong, instead of having to do an entire nandroid restore (which can be time consuming if you have a lot of data, and also might be outdated depending on when you last backed up), you can just push your old, pre-modded framwork-res.apk to /system/framework through ADB, reboot...and you are good as new again, no need for nandroid

Categories

Resources