Related
Hi all
Don't know how many of you guys are ipaq transferees like myself, but there is one piece of software on the ipaq that has not been adopted in the XDA series handhelds, namely REVO - the remote control tool.
Anybody into gadgets in the way that we are will have too many remote controls lying about. This tool allowed me to put them on a shelf, and use them very rarely.
So.....
Does anybody have a clue how to extract it from the ipaq ready to be placed on the XDA II. NAturally, owning both devices, one would assume that providing I use it with either one or the other, you can provide this useful information conscience clear!!!!
Look forward to any thoughts
JJ
jjcodex said:
Does anybody have a clue how to extract it from the ipaq ready to be placed on the XDA II.
Click to expand...
Click to collapse
Unfortunately, the Himalaya infrared hardware is not capable of communicating with customer devices like TV sets. There is nothing any software could do about this - only some hardware change can help.
Cheers
Daniel
Also some Ipaq's Irda are just very powerfull made..have a range of 10-15 meters.
Normally pda Irda's have a range of 2-3 meters.
not sure why the ir would be 100% incompatible with the tv
if special software written for it was used
about the range issue
http://www.smarthome.com/8220A.html
http://www.homeautomationnet.com/Shopping/remote-control-accessories.asp
http://www.pdawin.com/irtranceiver.html
suppose one of these would inc the range
i had
http://www.pdawin.com/
this software running on my xda1
too bad the range was only 30cm
Thanks for the feedback guys.
I am surprised that the range is so different between devices. I understood that the infra red transmit distance was usually further than the receive. Would this be applicable to the XDA II I wonder. I will run some experiments with a phone to see if I can assess distances.
Had a look at the PDA Win software, looks quite functional, perhaps not as slick as the built ipaq version. 30cm range... doh!
They seem to have specifically excluded the XDA II. I wonder if this is a range issue as you guys have suggested.
Hmmm......
Sounds like an excuse to spend money on a very very very posh do-all remote control!!!!!!!!! (LOL)
Thanks for your thoughts anyway.
Cheers guys
Rudegar said:
not sure why the ir would be 100% incompatible with the tv if special software written for it was used
Click to expand...
Click to collapse
Well, TVs use "consumer" infrared, while PDAs use "IrDA". See here for a more detailed explanation. It has nothing to do with the power or the range of the IR LEDs and phototransistors.
Cheers
Daniel
Well, TVs use "consumer" infrared, while PDAs use "IrDA". See here for a more detailed explanation. It has nothing to do with the power or the range of the IR LEDs and phototransistors.
Click to expand...
Click to collapse
and yet i had pdawinøs software working ok on my xda1
and also used it to comm with my laptop so some infrared classify as
both IrDA and consumer
if the range is ok then the only difference i can think of is protocol and that should be possible to work out so that software would work on the xda2
i also had my trusting old hp48 calc working as a remote at a time
prob still have the software somewhere
Well, TVs use "consumer" infrared, while PDAs use "IrDA". See here for a more detailed explanation. It has nothing to do with the power or the range of the IR LEDs and phototransistors.
Click to expand...
Click to collapse
I would have to side with Rudegar on this one, as I have not only used the Ipaq for several consumer devices but the extremely fundamental Palm III (aahhhh those were the days, when a calculator was considered to be a posh option.
I would say, however, that neither successfully worked with a sky remote, which I wonder may be due to two-way data transfer. I wonder if this is the IrDA vs Consumer difference.
I read the link to the Irda page, which as you suggest states that the two are different. I would agree that the two standards are different, but unless built-in hardware compatability is provided to the majority of pda's, there must be a way of emulating the consumer device within the IrDa protocols.
Hmmm... A little out of my depth on this one. Hopefully somebody else can explain!!
Cheers
JJ
The xda 1 I have works fine as a remote control for my tv and dvd etc, I use "learning2 mode to program the xda using the original remote handset. The xda 2 however is total crap as a remote, however if you wish to use it from one position, for instance the couch in your living room, there is a device called an infra red repeater, this allows you to operate an infra red device from a greater distance, I will see if I can find a name for manufacturer but I am sure this device exists, its selling point was enabling you to operate your cable/sattelite box from upstairs even when you had no line of sight to the box. It was a money saver because you could connect your cable/satellite to your upstairs tv instead of having to purchase a second box from the provider and be able to change channels from upstairs.
Guys,
I wouldlike to get inside the discusion because I have almost the same problem and I would like some help.
I also found the hard way that the XDA II does not work as a remote control, then I found this Total Remote software and module that really got myself impressed, I bought it and also the adaptor for the audio output.
Now I am able to output the signals without problem, the software works very fine and control the eletronic equipments without any problem.
But then I got to test the learning mode and then my problems started. The XDA II canot learn nothing! It wont recognize any kind of command that comes from any remote controler. To make sure it was not a problem of the software I tested to more diferent remote controler softwares and they also does not learn. What really make me disapointed is that even touching the controler IR led with the XDAII IRda port, the XDA II can´t learn anything.
I already tried to disable the "receive all incoming beans" and do a soft reset, but this also does not worked.
I am writing this in the hope I am forgetting something and one of you give me any more idea.
OR
To also ask for the more experts, if it is possible to substitute the IRda port with a common IR led found on any remote controler (of course doing some soldering). If there is compactibility between them, I think I will give it a go, since I really whant a remote control on my XDA II.
Thanks a lot
Felipe
thats what i've been saying all along
the xda2's ir modules is not the default ir module which all the remote software is written for
the remote applications would have to be written directly for the modules ir in the xda2 for it to work
i've come across no such applications as of yet
Has anyone used it as a Univeral Remote for other infrared devices like (TV, DVD Player)? What software did you use? Does the IR suck like the strength of the O2 XDA 2?
Peace
The IR on the Universal seems to be significantly more powerful than the XDA2. Ive used it with Novii Remote and it works at the same distance as a normal remote.
...the position of the IR port isnt ideal though
bigal488 said:
...the position of the IR port isnt ideal though
Click to expand...
Click to collapse
Agreed, not the most ideal of locations but, then again, I'm too preoccupied with the fact I can actually USE it at a distance to really care if it's a bit cumbersome!! :lol:
Ant
Is there any software which will do this on the Wizard?
Hey everyone! After searching on the forums and other sites for a long time i have came to a holt!
I'm looking for a IR remote control program for my T-Mobile MDA USA WM5 (WIZA200), and I have tried alot of programs... Lets see, so far no luck at all, most of the programs I downloaded install fine and I can run them but no IR ANYTHING! They can't seem to send or 'Learn' any of the IR signals.... So it makes me really frustrated, and I am wanting a program to control my home intertainment center..
If anyone could help with maybe supplying me with a download link or maybe one of the programs that have been 'modded' to run with theWizard then that would be awesome!
Thanks in advance, hope to hear a reply!
i dont think the hardware on the fone is capable to support the function you want....but im not 100% sure
hmm, can anybody confirm this, the wizard does have a IR port, and most of the programs installed and runned fine(other then it couldn't send or receive IR....)
Hi, I just remeber when I was reading some reviews about the wizard that a review had confirmed that:
The reviewer said that he could use the kjam as a remote controller for his TV and DVD player from almost any distance within his room.
I was happy, but I have some doubt with regard to (any distance), since I think that IR range is not enough to send for a 4 meters distance!
I really dont remember where I have read this but I am sure that I have read it, so I think that the wizard is capable of using IR as a remote control, but there is somehow a lack of software support for this issue.
good luck all
Hi, just a corrrection, may be I have mixed things up.
I searched for the topic on the internet and I found that it was talking about JASJAR, here what was exactly written:
"Originally Posted by Tekflow at http://forum.xda-developers.com/viewtopic.php?t=30449
This is one good surprise. I have been using Pocket PC Phones since the first O2 XDA, then XDA II, then i-mate PDA2, and none was really compatible with any TV remote control software (unless you sit at a distance of 1 meter from your TV!). But now everything changed with the Jasjar. The IRDA is so powerful: I am using it as a TV/DVD/VCR... remote control nearly from any distance (even with small obstacles between the TV and the Jasjar). I tried NoviiRemote and Total Remote: they both worked perfectly.
Good news!"
Click to expand...
Click to collapse
the link is: http://forum2.mobile-review.com//archive/index.php/t-35506.html
but do you think that the IrDA port of the kjam is very different from JASJAR's?? I really need to know! tell us guys!!
As far as I know Novii is currently looking at the specifications of TI chip so that they could customise their famous Novii TV Remote to work with Wizard.
PPB
So I desided to write a little dilly about what remote programs don't work for the MDA! ( AKA: WIZA200 )!!
So it starts here!
#1 Vito Remote - Will not reconize the IR port! ( What a supprise! lol )
#2 Novii Remote - Don't even start with this one, nice interface though!
#3 Windows remote II ( I think...)
Feel free to add to this list! And if you find a IR remote program for the MDA then please fill us in!
Right now i'm testing Total Remote, but don't get your hopes up, it seems to lock-up when trying to train, but I'm not giving up yet because I might have some settings wrong!
BTW Bust I can't wait for Novii to get that done!
I only have a wallaby, but the hardware is just about the same, as far as the IR is concerned.
I'm not familiar enough with the newer devices, but I do know that the ir components in the wallaby/BA, and many other pda devices from that time period, are capable of being used as remotes, with the only real drawback being transmit distance (the hardware is not the same as a real remote controller).
I use pdawin's tv remote 5.5, and it works about 8 feet or so (about 3 meters). it learns and what not.....
another post I have read says that netremote from proximus also works..... good luck
i'm not sure about the jasjar, but keep in mind that consumer ir is what has a much longer distance
my clie worked really far away
i tried the jam's ir and it was 2 meters ish
haven't tried the wizard's ir for remote though
Hmm, see the thing with the Wizard is that I can't find a program that will reconize the IR port, it's not a distance problem.... So if anyone knows of a remote program for the Wizard, then that would be awesome!
don't bother
It's not worth your time. Both the jasjar and the wizard have FIR or Fast infared which means it will only transmit about 2.5 feet (if your lucky)away from the reciever. You need to find devices that use CIR or commercial infared. I'm pretty sure they don't make one in a minisd format so you will have to play the waiting game. Another way aroung this is to get a remote repeater and have your infred port right next ot it but that sucks also
It's not worth your time. Both the jasjar and the wizard have FIR or Fast infared which means it will only transmit about 2.5 feet (if your lucky)away from the reciever.
Click to expand...
Click to collapse
It seems that JASJAR users are more lucky than u think, they got their remote control functioning from 'nearly any distance'
See my upper post and good luck
novii remote works fine
see this threwad for a similar discussion:
http://forum.xda-developers.com/viewtopic.php?t=43678&highlight=
just installed the novi 4.0 beta trial version and it works with my wiza200.
distance varies:
TV aprox. 3m
DVD (is on floor): 1.5 m
but TV is fine for me since the original remote broke into pieces and is just hold together with tesa.
Hello guys,
I found software that works pefect with the wizard to IR remote your tv
no problem with distance
look @ www.wincesoft.de/html/remotecontrol_ii.html
first software i found that works
using novii remote for weeks.
i use the Novii Remote Deluxe v4.11 on my qtek 9100 and works fantastic! with mi philips tv, and LG Dvdplayer
Third to novii. It's really fantastic to control all my stuff (I have 6 components in my home theater!)
I prefer WinCESoft's RemoteControl II.
Some screenshots of RemoteControl II:
Try this with your "fantastic" Novii
The new version v2.12 was released yesterday at: www.WinCESoft.de
This would be so awesome at work!!! Next time they TRY to give us a safety meeting with a video, there's liable to be some little punk sitting in the corner with his 8125. And a really mad safety coordinator wondering why the dvd player won't stay on
JamesR311 said:
This would be so awesome at work!!! Next time they TRY to give us a safety meeting with a video, there's liable to be some little punk sitting in the corner with his 8125. And a really mad safety coordinator wondering why the dvd player won't stay on
Click to expand...
Click to collapse
Haha so true.
jodepro said:
Hello guys,
I found software that works pefect with the wizard to IR remote your tv
no problem with distance
look @ www.wincesoft.de/html/remotecontrol_ii.html
first software i found that works
Click to expand...
Click to collapse
So what kind of distance do you get with Remote Control II with an 8125??
just installed RemoteControl II, v2.12 on my hp ipaq4700...
IR working from over 4 metres - if only the program was a little more user friendly i'd buy it - very limited skins for new devices... no AMP skin and it has a VCR skin- haven't turned one of those on in over 8 years..
looks like the IR unit on the pda is good so will have to try other apps...
Now tried Nevo and Vito - neither support my 4700hp with the IR port at the button - (Vito has a rotate 180- but thats only for the buttons/labels - not the whole screen; and it doesn't do that very well) - back to remotecontrol II i guess...
what distance are people getting on this Software? Novii got barely 2 feet on my wizard.
Some say its software, some say its hardware.. just want to know what to expect.
hi to all,
I'm very happy about having Remotecontrol, but now i am looking for a Software that can read ccf files. I have heard about TV Remote control. Does anybody tested this app on a HTC Wizard? Pls help.
Lzaman
hi, im using novii remote controler on my hermes but it sems he ir is not owerful enaugh to operate the applicationi need to be very close to the tv to change the channel,about 10 inches.is there a way to increase the strenghton the ir on my hermes? or it isjust the application? i used it with my universal before and there were no problms at all i could have changed the channels standing at the very end of the room. so it seems it is hermes and its ir.am i right?
the second question is the an application whcih will allow me to turn on and off the camera flash to be used as a torch without accessing camera app and the on and off flash? the best would be a today plug in.any help is appriciated. cheers
cudo
This is what you need for your second question;
http://www.vijay555.com/?Releases:VJCandela
When I used novii remote it needed to be pointed directly at the sensor and would only work from about 1.5-2m but I do remember that there was a version of the hermes that had a transmitter of lesser strength?
cudo said:
hi, im using novii remote controler on my hermes but it sems he ir is not owerful enaugh to operate the applicationi need to be very close to the tv to change the channel,about 10 inches.is there a way to increase the strenghton the ir on my hermes? or it isjust the application? i used it with my universal before and there were no problms at all i could have changed the channels standing at the very end of the room. so it seems it is hermes and its ir.am i right?
cudo
Click to expand...
Click to collapse
I had the same problem when I had installed NoviiRemote Deluxe... I need to go about 10cm distance to my television that it changes the chanal... thats crapy...
Can anyone may help?
Cheers
I use Novii Remote, change channels when I'm 7 or so feet away from the TV.
This is because of the weak IR range of the 8525, with my old HP the range was bigger, 15 feet I think.
this is like the 5th thread ive seen on this topic in the last month!
IRDA on a mobile purpose : to connect while next to a computer.
remote control for the TV purpose : to change the channel from the other side of the room, not to be confused with someone who is walking past or walking upto a tv inorder to also change the channel.
been wanting to ask this question for a while now...
is there a universal remore with touch screen that runs windows mobile? or some other stripped down version of windows? like tablet edition?
cudo said:
hi, im using novii remote controler on my hermes but it sems he ir is not owerful enaugh to operate the applicationi need to be very close to the tv to change the channel,about 10 inches.is there a way to increase the strenghton the ir on my hermes? or it isjust the application? i used it with my universal before and there were no problms at all i could have changed the channels standing at the very end of the room. so it seems it is hermes and its ir.am i right?
the second question is the an application whcih will allow me to turn on and off the camera flash to be used as a torch without accessing camera app and the on and off flash? the best would be a today plug in.any help is appriciated. cheers
cudo
Click to expand...
Click to collapse
Anything of this ? http://www.novii.tv/up/forum/viewforum.php?f=33
st3v3 said:
this is like the 5th thread ive seen on this topic in the last month!
IRDA on a mobile purpose : to connect while next to a computer.
remote control for the TV purpose : to change the channel from the other side of the room, not to be confused with someone who is walking past or walking upto a tv inorder to also change the channel.
Click to expand...
Click to collapse
Well, my good old medion pda was able to change the channel from very long distances so it should be possible for the TYTN to do the same.
the Medion wasnt that running 2003 and almost when Bluetooth was a novelty?
Being a German brand who knows what magic they put in it, most likely it has a rod of Uranium 234 in it to help charge the batteries.
I tried several of those remote control softwares. Common problem is weak IR on the TyTN that was designed for other purposes as st3v3 pointed out.