Database Users

T-mobile and dev phone

Hello everyone,
I have just ordered one of the Dev phones and am anxious to start playing with it.
I had a question that I thought some people here might have some experience with. I do currently have T-mobile as my cell provider. I planned on just putting the sim from my old phone into the new to transfer over my service (I would like to use the phone while I play with it). I started thinking about this after browsing around the forums and I had a few questions.
I was wondering what T-mobile actually does/adds to the firmware before they push it out to the G1 phones.
I figure someone here has T-mobile service and a dev phone so I was also curious what T-mobile "features" might be missing or might they try to block? What about that Favorite 5 plan, I am sure they have to add their own code to the firmware to allow it to support that, so I am guessing that option is already out of the question.
Aside from the unlocked part of the phone is the firmware on the dev phone any different than what comes standard on the G1 (I guess minus the T-mobile parts)
Well this is my first post and I wanted to thank everyone for their time

The set of applications that are included on the ADP1 out of the box are similar to the set of apps provided on the UK version of the G1. In particular, it's missing such goodies as the Voice Dialer, the Amazon MP3 store, and the MyFaves software. Additionally only the gtalk provider is supported in the IM app.
From http://www.gotontheinter.net/content/android-developer-phone-1
If you want the Amazon MP3 Store you can extract it from any G1 update file. If you want the Voice Dialer, extract it from JesusFreke's modified ADP1 build, or just install his modified build.

[WIP]Phone Calls On CDMA TAB

So I just picked one of these up and want phone calling ability on it.
I have already flashed the phone to cricket, as this is the service I will be using it one.
I found the APK's for the TAB that includes the calling. Of course that throws errors.
Thats because you can't replace the Phone.apk without resiging the whole /system/app and /system/framework folder so thats my next test

Good luck!
Look forward to hearing how it goes for you.
I think if this becomes commonplace, (ideal solution being a PhoneApp you download for free from the Market), then hopefully the Telcos will just give up on dumbing the tabs down and let them work as they should as standard.

Right now i'm creating a script that will auto pull the files, sign them, and push them back to the phone so that i dont have to do them one at a time.

How do you plan to get the tab registered on Cricket's network with a voice plan?

I don't think that it will be hard to get it activated on the networks. I have spoken with my friends at the local Verizon corporate store, and they are more than happy to activate my CDMA Tab from a "Tablet" to a "Smartphone" on my account.
Of course once the Phone is re-enabled.

I wonder, how many people out there are at work, spamming F5 on this thread waiting to see an outcome

It won't be hard to activate it for data from a tab to a smartphone but what about trying to activate it on Cricket when (and I am only assuming) Cricket doesnt have an IEMI ID for the device in their system? It's like buying a phone that only Sprint selss and trying to activate it on Verizon but Verizon's system doesnt have the ID for it.
Just my thoughts.... =)

dougvan,
Im using the verizon tab, cricket accepts other carriers devices.
I can activate this on cricket " Witch is already activated with full 3G now" all you have to do is give cricket the MEID activate it on the 45 or 55 a month for unlimited everything and provision the tab. Just like any other phone.
I messed up the first tab i had because i failed to backup the files, before siging them and pushing them back to the tab. I got it recovered thanks to someone posting the virign files for me. I took that back and swapped it out for a verizon tab like i wanted in the first place.

The sprint tab is definitely able to make calls out. I figured out how to make it dial out emergency numbers. A dial pad comes up and everything And that's on bone stock. This has to be possible.

infamousjax,
what did you do to pull it up ?

download launcher pro.. long press on homescreen to add shortcut, then goto launcherpro activities, goto network manager, and then pick emergencycall, its like the first option. it will make a shortcut on your homescreen that lets you make emergency calls. ive gone through the whole list trying to see if i can get it to make real phone calls but no dice. maybe if i transferred a new phone .apk in and then tried, it might work!

Well, first we need a recovery like clockwork for one. I was working on it but ubuntu on my pc is being stupid..
With recovery im willing to risk another tab but sense i swaped this out already im not.
The reason i think its not so easy to just swap apk's is because the whole framework + system folder needs to be resigned to work with the phone.apk.
I say this because when working on the EVO rom when i had to patch the phone.apk, i also had to sign it and sign anything that was associated with it on my pc. Or phone.apk would throw a bunch of "fc's"

Ok the tab on CDMA can make calls out. The problem is samsung removed a lot of stuff from the framework for the dailer.
That means we need clockwork recovery. This way we can build a rom based off the fascinate samsung.

AT&T and T-Mo are up - now we need some CDMA voice love!

How to get 3g on boostmobile guide!!!

Disclaimer
The following guide is for educational purposes only, it is not intended to start, continue and or conducting illegal activities such as esn/meid changes that do not belong to you and or invasion of private network data, anything that can be proven as a means to obtain services that you have not paid but not limited to extending the human knowledge and testing our capacity to evolve into a better human race than what we are today…. LOL …..is true…
DURING THIS PROCESS I WAS USING WIN VISTA HP 32 BITS issues with drivers signatures on 64 builds.
Required software and Tools
QPST build 2.15 no exceptions
CDMAWORKSHOP 3.5 or above-please use paid version to support developers. If you don’t have the funds and or are cheap there is a cracked version floating around the web.
BOOSTMOBILE INCOGNITO- not really true any phone capable of receiving 3g signals and that you are able to read items 465,466,1192,1194 will work fine as long as the device is already in service with the network of your choice. However this one is intended on the boost/the now network prepaid bootlegged network.
Incognito win vista 32 drivers
Samsung Fascinate Drivers
STEPS FOR THE INCOGNITO DATA EXTRACTION ETC.
--1—after you have successfully installed the Incognito drivers please connect the phone. Launch CWS and connect to the dial port. Read the phone and head to the Security tab.
Click on SPC/lock and pull the curtain and select Universal Ram once done search for incognito. Send the spc once is retrieve and read and save NAM to a folder of your choice. Name it whatever you want, next head to other tab and read PRL and also save it to same folder. *found out the phone will work better with the PRL the incognito was working with. Don’t write anything from sprint may dropped your signal. I know is weird does not makes sense but feel free to explore.
Because of sprint prl it would override my data info and had to restart the process again. My experience. Now access the Memory tab under NV items and read the following numbers 465,466,1192,1194 each one individually. Your beginning address is the same as your end address for example: starting 465-465 do not do 0465-0465. Won’t work and may brick your fascinate once you write, repeat the process for each one and save with whatever name, preferably as the number item you are using. *very important* now we want to manually copy down your user id. On the phone dial ##3282# it will bring you to a menu insert your spc and access user name. please copy exactly.
Turn off your incognito and put it away. Take the battery out you don’t want someone else turning it on by accident. It will scramble your data settings on the fascinate.
PLEASE MAKE SURE THAT YOU DO A FACTORY RESET ON THE FASCINATE. We don’t want any bits of information from a previous setting creating conflict with the new data.
At this point your Samsung Fascinate have acquired a new Dec number that was done that you don’t know, want to know or talk about. Main point is that you did not do it.
After reset phone will want to be activated. To bypass please dial *#83786633 and the Home Key
Now you want to enable the hidden menu. *#22745927 it will take you to a screen and select enable hidden menu.
DIAL ##3282# or **3282 or ##3282 which ever works for you send spc and change the user id on the phone to the one that you wrote down earlier. REBOOT
Depending on the rom you are using the DIAG option is under WIRELESS & NETWORK please select it and now your pc will be installing the required drivers if you have not installed them before.
Launch CWS and select port, read info and head to Security Tab. You must send the 16 digit password in order for all data to write correctly. If you don’t know this number here it is 2010031619780721. By default the password is 000000 but it will not work until you have enable hidden menu. Lets continue.
Once you have sent the spc please access the NAM and load the one you previously saved from the incognito, and click write.
Now do the same thing for the PRL on the Other tab. Exit cws and reboot, after reboots reconnect send 16 digits, you could do the 000000 but for some reason I feel that it does not writes everything correctly.
Head to the NV items section and Hit Write, it may say that you may needs spc first just click yes and load the 1st nv item starting with 465 from the file you saved them earlier in an ascending pattern. One all 4 items have been written exit cws and wait for it to reboot. Disable DIAG MODE. After the phone has finish loading the sd card etc if the 3g signal does not start after 10-15 seconds the following applies. Most likely you will need the next step.
Launch QPST 2.15 if you do not have cws you need to install QPST 2.7.323 due to the fact that under 2.15 the fascinate will appear under W5-FFA6250-T with limited tabs and NAM and MIP is not available.
Once online with QPST 2.15 we need to figure out the PPP config tab. Read the info on the phone and replace with the following data. This is what works with me whether on boost or Sprint alone
The following are horizontally just follow the name on each section,
-RM- ppp parameters
Config tries—Request timeout—Config NAK tries—Terminate tries—Request Time out—Comp settings—PPP Auth
20 1000 3 2 3000 5 3000
20 1000 3 3 1000 Disable
20 1000 3 3 1000 Ignored
User id do not high light it uncheck required pw Under PPP only click it but not check
-UM- same as above follow pattern
User ID this is funny and it should not work but it does. [email protected]
All lower case please.
Make sure that all is lower case. Also the password just click the box don’t check it leave it blank
Optimized Dormant Handoff box Checked do not click the 1xEVDO
-AN-
Userid
[email protected]@hcm.sprintpcs.com
Hit first save the Qpst file and write.
The phone will reboot but do not disconnect it until it has completely loaded all options. Disable Diag mode and with in 10 to 15 seconds you should have 3g. I was able to obtain 800-1350 kbs with speedtest.net
Note if you have another phone and want the data from the other phone the AN user id has to be same one that you program the very first time. Yes I know it does not make sense. But it does works. I hope this works for me as it has for me. It works for me and have reprogram various.

Any new news on this. Have a friend interested in this.
Sent from my SCH-I500 using Tapatalk

i would love to do this too. a write up would be highly appreciated man. I'm glad you got it to work!

Sent from my SCH-I500 using XDA Premium App

Okay, how did you sneak a Verizon phone onto a Sprint MNVO network?

obonilla30 said:
Disclaimer
The following guide is for educational purposes only, it is not intended to start, continue and or conducting illegal activities such as esn/meid changes that do not belong to you and or invasion of private network data, anything that can be proven as a means to obtain services that you have not paid but not limited to extending the human knowledge and testing our capacity to evolve unto a better human race than what we are today…. LOL …..is true…
DURING THIS PROCESS I WAS USING WIN VISTA HP 32 BITS issues with drivers signatures on 64 builds.
Required software and Tools
QPST build 2.15 no exceptions
CDMAWORKSHOP 3.5 or above-please use paid version to support developers. If you don’t have the funds and or are cheap there is a cracked version floating around the web.
BOOSTMOBILE INCOGNITO- not really true any phone capable of receiving 3g signals and that you are able to read items 465,466,1192,1194 will work fine as long as the device is already in service with the network of your choice. However this one is intended on the boost/the now network prepaid bootlegged network.
Incognito win vista 32 drivers
Samsung Fascinate Drivers
STEPS FOR THE INCOGNITO DATA EXTRACTION ETC.
--1—after you have successfully installed the Incognito drivers please connect the phone. Launch CWS and connect to the dial port. Read the phone and head to the Security tab.
Click on SPC/lock and pull the curtain and select Universal Ram once done search for incognito. Send the spc once is retrieve and read and save NAM to a folder of your choice. Name it whatever you want, next head to other tab and read PRL and also save it to same folder. *found out the phone will work better with the PRL the incognito was working with. Don’t write anything from sprint may dropped your signal. I know is weird does not makes sense but feel free to explore.
Because of sprint prl it would override my data info and had to restart the process again. My experience. Now access the Memory tab under NV items and read the following numbers 465,466,1192,1194 each one individually. Your beginning address is the same as your end address for example: starting 465-465 do not do 0465-0465. Won’t work and may brick your fascinate once you write, repeat the process for each one and save with whatever name, preferably as the number item you are using. *very important* now we want to manually copy down your user id. On the phone dial ##3282# it will bring you to a menu insert your spc and access user name. please copy exactly.
Turn off your incognito and put it away. Take the battery out you don’t want someone else turning it on by accident. It will scramble your data settings on the fascinate.
PLEASE MAKE SURE THAT YOU DO A FACTORY RESET ON THE FASCINATE. We don’t want any bits of information from a previous setting creating conflict with the new data.
At this point your Samsung Fascinate have acquired a new Dec number that was done that you don’t know, want to know or talk about. Main point is that you did not do it.
After reset phone will want to be activated. To bypass please dial *#83786633 and the Home Key
Now you want to enable the hidden menu. *#22745927 it will take you to a screen and select enable hidden menu.
DIAL ##3282# or **3282 or ##3282 which ever works for you send spc and change the user id on the phone to the one that you wrote down earlier. REBOOT
Depending on the rom you are using the DIAG option is under WIRELESS & NETWORK please select it and now your pc will be installing the required drivers if you have not installed them before.
Launch CWS and select port, read info and head to Security Tab. You must send the 16 digit password in order for all data to write correctly. If you don’t know this number here it is 2010031619780721. By default the password is 000000 but it will not work until you have enable hidden menu. Lets continue.
Once you have sent the spc please access the NAM and load the one you previously saved from the incognito, and click write.
Now do the same thing for the PRL on the Other tab. Exit cws and reboot, after reboots reconnect send 16 digits, you could do the 000000 but for some reason I feel that it does not writes everything correctly.
Head to the NV items section and Hit Write, it may say that you may needs spc first just click yes and load the 1st nv item starting with 465 from the file you saved them earlier in an ascending pattern. One all 4 items have been written exit cws and wait for it to reboot. Disable DIAG MODE. After the phone has finish loading the sd card etc if the 3g signal does not start after 10-15 seconds the following applies. Most likely you will need the next step.
Launch QPST 2.15 if you do not have cws you need to install QPST 3.11.323 due to the fact that under 2.15 the fascinate will appear under W5-FFA6250-T with limited tabs and NAM and MIP is not available.
Once online with QPST 2.15 we need to figure out the PPP config tab. Read the info on the phone and replace with the following data. This is what works with me whether on boost or Sprint alone
The following are horizontally just follow the name on each section,
-RM- ppp parameters
Config tries—Request timeout—Config NAK tries—Terminate tries—Request Time out—Comp settings—PPP Auth
20 1000 3 2 3000 5 3000
20 1000 3 3 1000 Disable
20 1000 3 3 1000 Ignored
User id do not high light it uncheck required pw Under PPP only click it but not check
-UM- same as above follow pattern
User ID this is funny and it should not work but it does. [email protected]
All lower case please.
Make sure that all is lower case. Also the password just click the box don’t check it leave it blank
Optimized Dormant Handoff box Checked do not click the 1xEVDO
-AN-
Userid
[email protected]@hcm.sprintpcs.com
Hit first save the Qpst file and write.
The phone will reboot but do not disconnect it until it has completely loaded all options. Disable Diag mode and with in 10 to 15 seconds you should have 3g. I was able to obtain 800-1350 kbs with speedtest.net
Note if you have another phone and want the data from the other phone the AN user id has to be same one that you program the very first time. Yes I know it does not make sense. But it does works. I hope this works for me as it has for me. It works for me and have reprogram various.
Click to expand...
Click to collapse
Im sorry guys for not posting earlier. I was out of it but ..... im ok now. I hope this guide will help you or at least give you and idea.

obonilla30 said:
Disclaimer
The following guide is for educational purposes only, it is not intended to start, continue and or conducting illegal activities such as esn/meid changes that do not belong to you and or invasion of private network data, anything that can be proven as a means to obtain services that you have not paid but not limited to extending the human knowledge and testing our capacity to evolve into a better human race than what we are today…. LOL …..is true…
DURING THIS PROCESS I WAS USING WIN VISTA HP 32 BITS issues with drivers signatures on 64 builds.
Required software and Tools
QPST build 2.15 no exceptions
CDMAWORKSHOP 3.5 or above-please use paid version to support developers. If you don’t have the funds and or are cheap there is a cracked version floating around the web.
BOOSTMOBILE INCOGNITO- not really true any phone capable of receiving 3g signals and that you are able to read items 465,466,1192,1194 will work fine as long as the device is already in service with the network of your choice. However this one is intended on the boost/the now network prepaid bootlegged network.
Incognito win vista 32 drivers
Samsung Fascinate Drivers
STEPS FOR THE INCOGNITO DATA EXTRACTION ETC.
--1—after you have successfully installed the Incognito drivers please connect the phone. Launch CWS and connect to the dial port. Read the phone and head to the Security tab.
Click on SPC/lock and pull the curtain and select Universal Ram once done search for incognito. Send the spc once is retrieve and read and save NAM to a folder of your choice. Name it whatever you want, next head to other tab and read PRL and also save it to same folder. *found out the phone will work better with the PRL the incognito was working with. Don’t write anything from sprint may dropped your signal. I know is weird does not makes sense but feel free to explore.
Because of sprint prl it would override my data info and had to restart the process again. My experience. Now access the Memory tab under NV items and read the following numbers 465,466,1192,1194 each one individually. Your beginning address is the same as your end address for example: starting 465-465 do not do 0465-0465. Won’t work and may brick your fascinate once you write, repeat the process for each one and save with whatever name, preferably as the number item you are using. *very important* now we want to manually copy down your user id. On the phone dial ##3282# it will bring you to a menu insert your spc and access user name. please copy exactly.
Turn off your incognito and put it away. Take the battery out you don’t want someone else turning it on by accident. It will scramble your data settings on the fascinate.
PLEASE MAKE SURE THAT YOU DO A FACTORY RESET ON THE FASCINATE. We don’t want any bits of information from a previous setting creating conflict with the new data.
At this point your Samsung Fascinate have acquired a new Dec number that was done that you don’t know, want to know or talk about. Main point is that you did not do it.
After reset phone will want to be activated. To bypass please dial *#83786633 and the Home Key
Now you want to enable the hidden menu. *#22745927 it will take you to a screen and select enable hidden menu.
DIAL ##3282# or **3282 or ##3282 which ever works for you send spc and change the user id on the phone to the one that you wrote down earlier. REBOOT
Depending on the rom you are using the DIAG option is under WIRELESS & NETWORK please select it and now your pc will be installing the required drivers if you have not installed them before.
Launch CWS and select port, read info and head to Security Tab. You must send the 16 digit password in order for all data to write correctly. If you don’t know this number here it is 2010031619780721. By default the password is 000000 but it will not work until you have enable hidden menu. Lets continue.
Once you have sent the spc please access the NAM and load the one you previously saved from the incognito, and click write.
Now do the same thing for the PRL on the Other tab. Exit cws and reboot, after reboots reconnect send 16 digits, you could do the 000000 but for some reason I feel that it does not writes everything correctly.
Head to the NV items section and Hit Write, it may say that you may needs spc first just click yes and load the 1st nv item starting with 465 from the file you saved them earlier in an ascending pattern. One all 4 items have been written exit cws and wait for it to reboot. Disable DIAG MODE. After the phone has finish loading the sd card etc if the 3g signal does not start after 10-15 seconds the following applies. Most likely you will need the next step.
Launch QPST 2.15 if you do not have cws you need to install QPST 3.11.323 due to the fact that under 2.15 the fascinate will appear under W5-FFA6250-T with limited tabs and NAM and MIP is not available.
Once online with QPST 2.15 we need to figure out the PPP config tab. Read the info on the phone and replace with the following data. This is what works with me whether on boost or Sprint alone
The following are horizontally just follow the name on each section,
-RM- ppp parameters
Config tries—Request timeout—Config NAK tries—Terminate tries—Request Time out—Comp settings—PPP Auth
20 1000 3 2 3000 5 3000
20 1000 3 3 1000 Disable
20 1000 3 3 1000 Ignored
User id do not high light it uncheck required pw Under PPP only click it but not check
-UM- same as above follow pattern
User ID this is funny and it should not work but it does. [email protected]
All lower case please.
Make sure that all is lower case. Also the password just click the box don’t check it leave it blank
Optimized Dormant Handoff box Checked do not click the 1xEVDO
-AN-
Userid
[email protected]@hcm.sprintpcs.com
Hit first save the Qpst file and write.
The phone will reboot but do not disconnect it until it has completely loaded all options. Disable Diag mode and with in 10 to 15 seconds you should have 3g. I was able to obtain 800-1350 kbs with speedtest.net
Note if you have another phone and want the data from the other phone the AN user id has to be same one that you program the very first time. Yes I know it does not make sense. But it does works. I hope this works for me as it has for me. It works for me and have reprogram various.
Click to expand...
Click to collapse
followed word for word still no data what rom are you using and what radio

nick cannon said:
followed word for word still no data what rom are you using and what radio
Click to expand...
Click to collapse
You need to be using a 2.1 rom with dial up networking mode or use 2.2 with the settings mod for it to be able to be read by QPST. and you need TWO versions of QPST for the settings to stick on the fascinate. after you've cloned the incognito make sure u turn that **** OFF!!! forever... just break that **** forreal because if not it will mess up the data settings (or get u in trouble for cloning since its "illegal"). This works the same as flashing to Cricket, as i know because i've flashed both of mine to cricket the month after we switched from t-mobile because of those two bs 200 dollar phone bills (now 113 for two lines). we dont use that much mobile data right now because we have WiFi at home.
My friend did this on his epic and it works flawlessly. I was actually gonna sell my fassy for 200 (i can get a new one from this store right around the corner to flash for 200). So if anyone wants a fascinate, i'll sell them it for 200, so i can get a epic on boost, and 35 a month with shrinkage plan =O
Really, you should look on the flashing the fascinate to cricket thread its much less jumbled. just take the incognito settings plug them in to qpst in the fascinate (exactly) and then the data "should" work. thats what he did lol... i was there the last 30 minutes before he got it actually working. PM me and i can put u on with him if you need help.

Wait a second, so I can take a boost phone and run it on the vzw network? Data and all? For pennies on the dollar?
Sent from my SCH-I500 using tapatalk

Nick were you able to make it work? it should work mostly in any rom. better on 2.2 faster 3g. I clocked that phone at 1450 kbps. My little brother has it now. no problems at all. let me know if you need help

NO not on the VZW but on boost or cricket or any other company.

how to get 3g on boost
akaine2001 said:
You need to be using a 2.1 rom with dial up networking mode or use 2.2 with the settings mod for it to be able to be read by QPST. and you need TWO versions of QPST for the settings to stick on the fascinate. after you've cloned the incognito make sure u turn that **** OFF!!! forever... just break that **** forreal because if not it will mess up the data settings (or get u in trouble for cloning since its "illegal"). This works the same as flashing to Cricket, as i know because i've flashed both of mine to cricket the month after we switched from t-mobile because of those two bs 200 dollar phone bills (now 113 for two lines). we dont use that much mobile data right now because we have WiFi at home.
My friend did this on his epic and it works flawlessly. I was actually gonna sell my fassy for 200 (i can get a new one from this store right around the corner to flash for 200). So if anyone wants a fascinate, i'll sell them it for 200, so i can get a epic on boost, and 35 a month with shrinkage plan =O
Really, you should look on the flashing the fascinate to cricket thread its much less jumbled. just take the incognito settings plug them in to qpst in the fascinate (exactly) and then the data "should" work. thats what he did lol... i was there the last 30 minutes before he got it actually working. PM me and i can put u on with him if you need help.
Click to expand...
Click to collapse
you will get that but the 1x signal which is bull****, I am running this thing faster than the evo on Sprint 3g mode, we are actually talking about true 3g not your typical 400-800 kbps bs. cricket is different and much easier, cricket oass cricket etc bs, so simple even a cave man can do it. lol....

Is this usable on GB? I think cm7 breaks data ...
Have you tested on a GB rom?
Sent from my SCH-I500 using XDA App

This guide followed to the t works perfectly for the mesmerize as well... just thought id share.

I hate to revive a dead thread, but can this guide be used to flash a fascinate onto sprint as well? For educational and recreational purposes of course.

It should same steps.

I might have to try this. Verizon is robbing me
Sent from my SCH-I500 using XDA App

nice quide , it was really helpful , i have the fascinate working with 1x speed on boos which is suprisingly fast , i cant get mms to work though , any ideas .

I have 2 fascinates over on boost, I have not tested out the mms at all but I have full 1x and 3G speeds. if you dig around for boost mms on other phones for you will find things like
`` Dial ##3282#, edit and enter your epic’s spc, scroll down and on change the MMSC URL to “mm.myboostmobile.com” ``
and
``
MMSC: http://mm.myboostmobile.sprintpcs.com
MMS proxy: I left mine blank
MMS Port: 80
``
I used the later settings, but as I said, I have not tested my mms yet..

I have talk and text working fine,and I have the 3 g Icon but no internet .........can some one. please me
Sent from my PG86100 using Tapatalk

The EM App - Joint Developing Effort

Hey guys, I wanted to start a thread where all of the few developers that the DVP has can come together and develop for the DVP in a joint-effort, starting with understanding the EM app.
There have been recent changes to the EM app with the new firmware and Mango, so I was hoping to create neutral ground where we can lay out all of the uses of the EM app and how to exploit them for the greater good.
So first of all the basics:
To get the EM app, dial ##634#
There are 3 basic options when you get to the EM App:
Phone Information
System Information
MMS Settings
There isn't much to be done with the Phone and System information, as they are there for pure informational purposes, but something can be done with the MMS Settings
MMS Settings: Here you can edit your MMS settings, including the APN, username, password, Authentication Type, (For Data) and then your actual MMS Settings such as Name, APN, MMSC, MMS Proxy, MMS Port, Username, Password, and Auth Type
Not much developing can be done with these 3 options, but if you tap the blank space below the options and then use the physical keyboard to type "qwertyuiop" without quotes, you get additional options:
RD Test (Password: *#6336#)
MMI Test
MMI Test (Chinese)
FCQ Test
Protocol
Service Center
OOB (Password)
The RD Test brings up a slew of options:
Audio Loop -tests the audio (earphones required)
Backlight- tests the backlight (turn on and off by touching)
BT (Bluetooth) - Displays BT address, the test mode, TX Power Test, and BQB Certification.
Camera- tests camera by taking a picture
Compass-not sure how this works...
FM Radio- tests the radio (needs earphones plugged in)
Gap- measure 4 blocks and enter the measurements
GPS- Turn off location services and test the GPS
Isolated Storage Speed- test the speed of storage
Keypad- push all of the buttons to get back to main menu
LCD (AMOLED)- Test the LCD
LED- Turn on the screen, keypad, and the camera flashlight
Power Cycle- Test one power cycle (I don't know what it means?"
Power Management- Displays statistics of the battery
Recorder- Records audio to test the microphone
RF Power Forward- Displays the bands of your phone, and WCDMA information
Touch Pad- Brings up a menu to test the touch screen
Sensors-calibrate the Light Sensor, Proximity Sensor, and the Accelerometer
SD Card- the status of your SD card, the size, and the OS disk size
Sim Card-Says if your sim card is inserted
Sim Lock - Displays the Lock Code for your sim card...
Slider- tells you that your slider is open or closed
Vibrator-vibrates your phone
Video Music- tests music and video
Wifi-Brings up the Wifi menu, displays MAC address (other options unknown)
About EM- doesn't work(?) Says the page isn't ready yet.
Man Machine Interface Test (MMI) runs a series of tests on your phone, it runs through all the tests in the RD test.
The Function Quality Check Test (FQC Test): Its in Chinese
Protocol requires a password
Service Center, which allows tethering
OOB, requires password.
So, my goal is to have a mutual discussion ground in which we can exploit this EM app to its fullest, and maybe unlock some hidden features of the phone!

This won't help much, but is it normal to have the MMS Settings app show up in the app list? It's been there since I got it a few days ago, and I haven't even dialed ##634#. Also, in the app list, it's titled "Connection Settings", but it identifies itself as MMS Settings in the app itself and has all of the options you mentioned.

ElijahHouck said:
This won't help much, but is it normal to have the MMS Settings app show up in the app list? It's been there since I got it a few days ago, and I haven't even dialed ##634#. Also, in the app list, it's titled "Connection Settings", but it identifies itself as MMS Settings in the app itself and has all of the options you mentioned.
Click to expand...
Click to collapse
Yes, with the new FW 212, its bundled as a seperate App with new purchases.

I dont know if this has been found by anyone yet, but when you press 'protocol' and type in *#6336# it takes you to another menu with three options,
active feature- seems to contain all the options to control the radio frequencies such as wcdma, gsm, bands, save efs log, and reset all..
when i clicked on 'fixed in bands' it seems to give you an option to check which frequencies you would like to use, theres four boxes with four of the regular gsm frequencies, 850,900,1800,1900, but five different wcdma options, I IMT 2000, II PCS 1900, then IV 1700, V 850, and VIII 900..
TMO-stands for tmobile, brings up a longer list of other controls and status screens for the radio and other things that deal with tmobile network..
RILDRV Log Capture- not sure what this one is about but gives you three capture options- capture at function level, capture at info level, and capture at error level, then two buttons that say Capture and unCapture...
curious stuff.. I havent played around with it much yet other than that..
16gb NoDo with 212 firmware

Service Center, which allows tethering
Click to expand...
Click to collapse
Which isn't working in Mango Beta, hopefully works in RTM?

Monkyyy said:
Which isn't working in Mango Beta, hopefully works in RTM?
Click to expand...
Click to collapse
Some people have been reporting that it works with Beta 2, and the RTM(?)
Also, with regards to this thread, I know that the DVP has no developer base behind it like the other devices, so I thought that looking into Dell's own app for its phones would help, and as a joint effort we might find a way into the DVP itself.

Also, I think some notable DVP-goers (such as notebookgrail and domineus) have already tried this, but what if ths thread could help us, or even work in our favor?

the major difficulty in the em.xap is tantamount
primarily the registry editor does work; but it only creates new keys - no modification of keys. Secondly, the interop capabilities has been rendered useless post nodo. So we have a unique situation as far as hacking the dvp

gauravr88 said:
I dont know if this has been found by anyone yet, but when you press 'protocol' and type in *#6336# it takes you to another menu with three options,
active feature- seems to contain all the options to control the radio frequencies such as wcdma, gsm, bands, save efs log, and reset all..
when i clicked on 'fixed in bands' it seems to give you an option to check which frequencies you would like to use, theres four boxes with four of the regular gsm frequencies, 850,900,1800,1900, but five different wcdma options, I IMT 2000, II PCS 1900, then IV 1700, V 850, and VIII 900..
TMO-stands for tmobile, brings up a longer list of other controls and status screens for the radio and other things that deal with tmobile network..
RILDRV Log Capture- not sure what this one is about but gives you three capture options- capture at function level, capture at info level, and capture at error level, then two buttons that say Capture and unCapture...
curious stuff.. I havent played around with it much yet other than that..
16gb NoDo with 212 firmware
Click to expand...
Click to collapse
Its been there since the DVP started.
The bands stuff is basically writing a flag to a file in the Isolated Storage of the EM App. Once you close the app, its state is gone. It doesn't really change bands in the Hardware as we thought to be.
The TMO options is useful if you are into AT Command. I had played with it a lot..But scary stuff. Its basically taking to the Radio Modem.
RILDRV Log Capture - haven't played with it. But looking at the code doesn't give much info.

Curious, why is there a dedicated section to T-Mobile when all of the phones aren't being used with T-Mobile?

Thunder_47 said:
Curious, why is there a dedicated section to T-Mobile when all of the phones aren't being used with T-Mobile?
Click to expand...
Click to collapse
Originally DVP was a TMO exclusive. May be they just left it there in the FW. I don't have a ATT DVP. Do they have the same TMO menu?

Is there anyway that we can use the EM app to change certain things such as IMEI (illegal) or find a way to bypass the upsell page when using Web2Go or T-Zones?
Basically, I want to use DVP with my grandfathered plan.
I don't believe that dell gave tmobile and att every single DVP IMEI out. There must be a low level security on each device that halts you from using web2go/tzones for working. I am trying to find that solution.
I am on tmobile USA with a grandfatherd web2go plan.
I originally ordered a t-mo DVP and found out it wont work on web2go/tzones.
I then bought the unlocked ATT DVP and unfortunately, it STILL doesnt work on web2go/tzones- knowing that I will only have edge speeds. I returned that device, BTW.
Any tips guys?
One thing I noticed: If the DVP chokes on loading up a webpage (via Low tower signal, etc), it will actually bring up the real webpage- somehow bypassing the upsell page.
But if you have full bars, the signal catches on, and you are redirected/forced to pay for an internet plan before you can use the grandfathered plan on the DVP.

I don't think this is possible, the IMEI is hardlined into your phone, changing it (if even possible) would probably cause your phone to be unrecognized by the T Mobile network.

The sad truth with this phone is that there will never be developer support for it like there is for HTC or other devices. Without a way to write to the registry or fix the broken interop service there is simply no way. This is something that the engineers (or their outsourced, contracted employees) at Dell would need to fix. And that won't happen because they won't waste time on an old phone, they'll just launch a new one.

Arcarsenal said:
The sad truth with this phone is that there will never be developer support for it like there is for HTC or other devices. Without a way to write to the registry or fix the broken interop service there is simply no way. This is something that the engineers (or their outsourced, contracted employees) at Dell would need to fix. And that won't happen because they won't waste time on an old phone, they'll just launch a new one.
Click to expand...
Click to collapse
No need to be pessimistic now, I'm sure if we all came together and explored all of the options (starting this this native app) we could eventually get to the promised land

Thunder_47 said:
No need to be pessimistic now, I'm sure if we all came together and explored all of the options (starting this this native app) we could eventually get to the promised land
Click to expand...
Click to collapse
I agree. Lets at lest keep open dialogue. You never know who may get there hands on a DVP...

haha, there's a difference between pessimism and reality. Take a look at the code of the unpacked EM.xap. Everything you'd need for your "native app" would be contained in there, including a way to modify the registry since EM and OurCOM.dll is the software layer that interfaces with the hardware at a limited level. There are people much more versed in the technical details of Windows Phone and the actual code of the EM app that can explain the uphill battle you face much better than I can.
But, any real progress needs to come from Dell themselves first, not the community. Their EM app is literally not completed. And, we know how Dell has responded thus far.
Not trying to be rude or anything, that's just how I see things and the situation with Dell.
edit: in an effort to keep people motivated here is a nice write up (part 1 of 3) about what is possible on a Venue Pro with Nodo: http://dennisdel.com/?p=840
keep in mind that things are now different if you're running Mango.

The line between realism and pessimism is a fine one. However, much in the way that Dell works, little progress fan be made on our side of the equation. But, that doesn't stop us from improving our phones using the tools that we have. Time spent whining about the things we can't do while the HTC guys are having super fun is time wasted.
Sent from my Venue Pro using XDA Windows Phone 7 App

Arcarsenal said:
edit: in an effort to keep people motivated here is a nice write up (part 1 of 3) about what is possible on a Venue Pro with Nodo: http://dennisdel.com/?p=840
keep in mind that things are now different if you're running Mango.
Click to expand...
Click to collapse
That's the same code as in the EM app. OurCOM.dll is nothing more than a gateway to the actual Driver DLL's. I did do some decompiling (PE Explorer and IDA tools) of the OurCOM.dll a while back and found that no code actually exists in it. It just invokes the actual Driver dll's which inturn communicates with dll's MS provides with the core OS. Dell themselves, didn't fully bake the EM app. Halfway along they left the development due to MS advising them not to expose the core features (like regedit,etc). I am not that familiar with C, but if someone has strong knowledge, we can try to work out some movement.
Here is some food for thought info to get someone going deep.
There is a file called QEMDriver.dll which is the actual driver file that does the majority of the gateway work in the EM app. Upon inspecting that file in IDA, i found that the core function resides in Coredll.dll (a MS OS file) and ril.dll (MS OS file for modem, calls, etc).
What i also found was(most people knew) if we crack open a way to provision the phone with the proper rights, anything is possible. MS even has article detailing how to provision certain rights,etc OTA. I tried all and failed.
If anyone wants, i can post the files that i referred and links to the provisioning.

I have seen all over the windows phone development forum that some HTC drivers work with the DVP, as far as tethering goes, can we extend this to other functions?

Had Verizon Samsung Galaxy S5. Switched to T-Mobile. Want to get rid of Verizon Apps.

Noob here. A relative gave me his Galaxy S5 when he upgraded. I swapped out the sim card at the T-Mobile shop.
My phone has a number of disabled but not uninstalled Verizon apps. It gives an accurate but annoying main screen message, "Verizon card not installed."
I guess my choices are:
1. Deal with it.
2. Root the phone, uninstall the Verizon apps, install the T-Mobile text messager (or another recommended text message app???), uninstall various other apps, work with a relatively clean phone.
3. Something else.
I'm an intermediate PC user, but my last smartphone was a cheapo Alcatel Fierce. I must admit I am not very cell-savvy.
My current half-baked plan is to visit Tom's Guide and root the phone using towelroot dot com and follow other advice therein. After it's rooted I'll... well I guess I'll see what I can do with the phone.
What happens then? [clueless]OBTW, what's a ROM repository?[/clueless]

Measure for Measure said:
Noob here. A relative gave me his Galaxy S5 when he upgraded. I swapped out the sim card at the T-Mobile shop.
My phone has a number of disabled but not uninstalled Verizon apps. It gives an accurate but annoying main screen message, "Verizon card not installed."
I guess my choices are:
1. Deal with it.
2. Root the phone, uninstall the Verizon apps, install the T-Mobile text messager (or another recommended text message app???), uninstall various other apps, work with a relatively clean phone.
3. Something else.
I'm an intermediate PC user, but my last smartphone was a cheapo Alcatel Fierce. I must admit I am not very cell-savvy.
My current half-baked plan is to visit Tom's Guide and root the phone using towelroot dot com and follow other advice therein. After it's rooted I'll... well I guess I'll see what I can do with the phone.
What happens then? [clueless]OBTW, what's a ROM repository?[/clueless]
Click to expand...
Click to collapse
You can root it and stick a after market ROM on it or use Odin and stick a stock T-Mobile ROM on it. You can find both by doing a google search for "Roms for t-moble galaxy s5". Select the XDA Forum for your phone and select what you want from there.