Hi guys, some months ago my htc is fall by my jeans and it break down. So i've buyed an lcd by brando hk (the same that sell screen protector) an lcd with digitalizer. Ok the pack arrive, i replace the lcd and is perfect. Work every etc. I had used for 1 day and some hours.. The next day i tidy up, start the htc and ok. I put in standby by pressing the button on the top.. After some minutes i re-press that button for use it because i've received a sms and don't work. So i reboot the phone, and nothing. It is only the lcd that don't work, because the feedback vibration work, if i call my phone ring and etc etc. But i don't see nothing. So very very angry i shutdown the htc. The next day again i try to use it and make the same play. So i contact the brando hk and ask to send me another lcd + digitalizer. They ship to me. Arrive, i replace it again. I use that for 30minutes and after make the same problem -.-" again, and again, and again. Guys please help me, i want re-use my fabolous phone
I don't think that is a software problem, because i've changed different rom and make a lot of full reset.
Thanks anyway
Hi!
I have the same issue: a fall, but not on the LCD side.
As you, my blaskstone works fine (i verified with MyMobiler software), but, on the screen, nothing
After many search i found a strange thing:, my LCD works only when i launch from the phone (with MyMobiler), the SSPL-Manual-TouchHD (see HardSPL thread).
And, i saw the three colors screen, with a corrupted Model ID/DeviceID, it looks like ˆDB instead of BLAC100
So, you can try also the SSPL-Manual for confirm your LCD still works, and deviceID is correct.
Sylvain.
I don't have understand much man.. Can you explain me again, please?
My screen sometimes work.. Now i've also updated the rom with another one, thinking that is a software problem but nothing. 1 of 8-9 reboot i've seen the three colors screen! And now nothing.
Ok stop, i do everything and the manual hspl say:
BLAC100 MFG 32M MI-BC
1.07.OliNex XA
MicroP-BlackStone (LED) v6
Guys i've used the phone for 5 long minutes!!! That see isn't a problem of lcd
It work great!
Nobody can help me?
Other thread
Lilith_v2 said:
Nobody can help me?
Click to expand...
Click to collapse
Please see my reply on the OTHER thread you posted with exactly the same problem.
Can a MOD please close down one of these two identical threads.
Related
Ok, it's tarted 2 days ago, suddenly my new exec screen going to blue (Like PC)??? just blue color (Sometimes white and black stripes) and hung, so I just restart it. But today, is terrible,its happend 6 times. Tonight the worst thing happend, blue screen come again but this time with soft reset, not help at all. Every time I soft reset the splash screen comes, and then that blue screen again. It happend about 5 times, the machine finally start but can't read my sd card and I try to do soft reset but screen goes and never come back. My exec didn't start at all. I tried to release the battery, leave for few minutes and put it back try to start it, nothing happend... now my exec has die.
Anyone please help me and advice please,
What I did just cook ext ROM (So it have autoconfig for my country's operator, and upgrade the radio to 1.14.10 from T-Mobile, like I did to my alpine but it have no problem until I sold it)
Whoa... help me bro...
Thanks in advanced
Finally it's start but never reach windows screen, the blue screen appears again.
And I remember, the strange thing, my IMEI that I read from device properties is: 355195002465655
But, the IMEI at back body,(Under the battery) : 355195000360361
Why?And what happen?
guess u have the same probs as some others
http://forum.xda-developers.com/showthread.php?t=291986
oops:
saw u r already i that post.......
OK, I've got the same problems as you did. I was so upset with the device that I hit it on my lap (with the battery clip side hitting my lap) and then put the battery back on. Then it turned on! So everytime I have this problem I just hit the battery clip side and it turns on like 70 percent of the time. I just realized the SD card is on that side...hmmm..must be something to do with SD. I'm pretty sure someday it would just stop working at all if I keep doing this.
I don't advise anyone doing this but so far it works for me. I still have problems waking it up though. I really think the mainboard is messed up so I'm trying to get a mainboard, even a broken miniusb mainboard just to test it out. I opened mine up to the last screw and no loose connections noted. So if anyone has a mainboard then can sell me PM me.
If you still have warranty on the device, I advise you to send it in for warranty repair. It seems to only get worst and not better. Goodluck, hopefully we can find a solution for this. If I do get a mainboard. I'll let you know if that fixed it.
Hmm, I've guess it, I think the pprob is mainboard. I'll send it for warranty, (But I bought it in other city not in my own city) So i'll have to send it then on friday this week i'll go to that store to check arround and maybe choose the best product. I'll give the update then.
Anyway someone can give a advice to choose the mainboard?
Thanks in advanced.
bump..we need help..Is it a mainboard or coaxial cable problem? Please advise..
OK, Problem found.. Thanks Corneluis...It is a problem with the voltage control on the mainboard! Anybody has a workaround for this?
SOLUTION FOUND!!! At least for my Jasjar. Thanks, cornelius about the info on faulty voltage control which causes the Bulverde CPU to hang and give funny lines and colors to the screen. The solution is to install Pocket Hack Master and disable the Device CPU scaling in settings and set the speed to 312mhz for standby and before you turn it off. Now you can always clock it to 520 when needed but before you turn it off or close the screen make sure the speed is only 312mhz.
This has worked for me for more than 24 hours without any sngle hang.
Hi,
I bought my TyTN 6 months ago. I upgraded it to WM 6 from HTC update and and few weeks later during wirting a text message my screen went white and I couldn't do nothing. I restarted it after 15 minutes and I discovered that all data is gone. I got plain OS.
From that time the situation was accuring again, but after few seconds it was working ok and white screen was disapearing. I was using different OS versions, as well as Shap's form 3.54 up to 4.31 but it on every the situation become the same.
I contacted with HTC but still i didn't get any reply. Any idea what the problem could be? Is it the screen? Please help...
KaPeer
It's probably flex cable problem. There's been a few issues this type.
hmotwr said:
It's probably flex cable problem. There's been a few issues this type.
Click to expand...
Click to collapse
Do You know is it possible to fix it and if YES how to do this?
im having the same problem with my softbank xo1ht. if i hard reset screen returns but after about 15-30 mins screen fades to white and i cant see anything or use any function??? please advise
My screen was going white like for almost a week (coincidentally after going through airport security xray). I called for a warranty replacement and wouldn't you know it, after I called I have yet to see the white screen on the old one.
Are your hard buttons (d-pad, answer, hang up, mail, IE) failing as well? Try pushing down on your device right under the bottom right of the screen and see if it'll turn white.. or put it in standbay and press down above your d-pad and then take it out of standby and see if that fixes it..
your probably running into a hardware problem which is discussed here:
http://forum.xda-developers.com/showthread.php?t=321163&highlight=white+screen
Hey I have an elf the T mobile version 64/128mb , phone has been working for 8 months now all of a sudden it wont respond but the call and end call buttons work fine the 4 way navigation key only work when lets say you go into the call records by pressing the green call button. You cannot do anything besides change time, answer calls and hang up. Please Help Tried hard reset soft reset, and the phone is unlocked to all networks using the network key method.
this looks a hardware problem may be the LCD or the digitizer
Is it fixable by software or maybe opening it up to fiddle ?
It is not the LCD, it is only the digitizer (the thing that is responsible for the 'touch') I recently had the same problem, until 1 week ago I purchased a new digitizer off eBay for $15.
Do not get LCD and Digitizer, just the digitizer to save money.
If there is no cracks or damage to the screen (bad cracks, pixel damage etc) you only need a digitizer.
I have a video I made of me changing mine which I'm editing atm. I do have photos.
This is the correct response. It is not software if it started to work occassionally and then stop, this is what happened to mine. 99% it is digitizer!
Thats cool please email me link [email protected] for your video I will order one now.
http://www.google.com/search?hl=en&...nge+digitizer+htc+touch+youtube&aq=f&oq=&aqi=
See the 3rd result.
Hey I read its going to ttake 14 days for my digitizer to come , in the mean time is there a way I can bypass the touch the screen alignment page when you first boot up?
you can get www.mymobiler.com
Cheers.
Tried it but requires you to accept the installation on the phone any other ideas?
Thats weird, mine doesnt.
it will auto install.
It says on the little status box installing mymobile to the phone then it dissappears saying not connect. this message comes up everytime you try and run it.
Sorry, I ran out of brain juice.
You have to stick with this for a while than, and bear the bitter pill.
MyMobiler should be able to install onto the phone itself.
But I really wonder why this doesnt work.
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
varyjam said:
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Click to expand...
Click to collapse
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
varyjam said:
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
Click to expand...
Click to collapse
Can you use the d-pad to do that?
Thanks you guys just come back from florida fitted the new digitizer everything works super and the digitizer i bought came with a new screen attached to it. best £7 spent lol
jeremy89632 said:
Can you use the d-pad to do that?
Click to expand...
Click to collapse
tried but d pad just initiates what ever is highlighted on the today screen
^^ A digitizer is a screen Its the touch screen part with htc logo at the bottom... right? (with a little ribbon comin out).. this IS the digitizer! (screen included).
Hi guys,
This evening something wring happened with my HD2. Suddenly without any visible reasons touch screen stopped working. Actualy screen itself is working but it doesn't react on any touches. I did hard reset - no luck, screen is working but touch surface isn't, so basically my phone is almost dead :-(
Have you seen this behaviour ? Is there any possible way to fix it ? The only thing that comes in my mind which could cause something like this is static electricity shock, but if it kills HD2 screen I want my money back.
I guess now I should use warranty and this is just after 1 month of usage....
Just a stupd question
Don't be offended by my question, I just want to rule out the obvious.
You're not wearing gloves due to the cold outside?
Greetings
chuelibrueder
No, I'm not using gloves with HD2 :-(
I have the same problem. I believe that the connectors under the screen became loose.
I have send an email to htc and they told me to contact the retailer to check if they can replace the device and if not to contact the service center in Cyprus.
There is another thread about this issue here
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Hmmm,
Yet another one having to go back due to hardware problems....
WB
I loose the touch screen today and the hardware button exept Home i think, i had to remove the battery and i waited 30s put it back and everything went in place, the phone had called one contact when i had the bug.
The only thing that happened before screen doesn't work and buttons : i received an MMS strange, i'm not sure i can rely on my phone
I only installed the 1.48 rom and the 3 patches (audio, sms and sd card)
20mihalko said:
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Click to expand...
Click to collapse
I contacted the service center in Cyprus and they offered to repair it but they don't have spare parts right now. I've also send an email to the retailer and wait for their answer.
Seems i have to wait after Christmas for a repair or exchange.
The good thing is that by pressing the screen with my palm or giving it a few solid taps it works for some time.
bBeware keyboard layout!
I had suffer bye used hadwritting layout sometime it cause screen doesn't responds
try change keyboard layout not hadwritting
Just had the same thing happen with mine, powers up but the screen wont respond anywhere i press. I have tried hard reset AND soft reset, nothing!
Have just restored factory ROM, and deleted hspdl and dropped off at vodaphone in town. Im gutted!!
really seems to be a production problem: i had to send my hd2 back to htc for screen replacement just 4 weeks ago... same fault as yours: the touchscreen wasn't responding to input anymore!
the last weeks i noticed that many people had this problem too...
wow.. keeping a close eye on this.. guess the same problem from the HD is creeping up to the HD2..
Well im hoping vodaphone dont turn around and say its not covered under warranty etc, I had to [like most ppl] sign up for two years to get this phone, i aint gonna be to happy if i have to spend the next 21 months of my contract without the handset i wanted!
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
tnx!
dio62000 said:
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
Click to expand...
Click to collapse
YESSS!!! thanx mate this worked like a charm!!
VlaJko79 said:
YESSS!!! thanx mate this worked like a charm!!
Click to expand...
Click to collapse
Well, it's been a few weeks now and I've had this problem several times again and worse, even after a hard reset; and almost each time I could fix it by pressing the screen/hardware buttons, but that shouldn't be the way, because I don't think it's good for the hardware, so I searched the forum and I think I found the two culprits (maybe a combination of the two):
1. The problem occured exactly the same day I began using my 16 GB card, class 2. It once happened that when I had the locked screen problem I took out the card and it immediately unlocked. But every now and then the phone still froze, even when I took out the SD card if the problem occured.
2. Then I have put off the automatic light adjustment settings and guess what; no more freezes!
It looks like a combination of power settings and use of SD card. I'm not very technical, but even when it looked like it was a hardware fault at first, it now seems it's a software fault after all.
Touchscreen doesnt work
Well F4CK my screen will not respond to touch at all anymore seems that this is a problem that is not well addressed tmobile is sending out a new one but the question is when will the touchscreen stop working on that "new" one.NOT happy at all.
Well this has now happened to me....no touch response but hardware buttons working, screen still displays-- off to JB HIFI as soon as I can to replace.
OOOKK I had this problem when i just flashed my phone with a costum rom. As far i remember my phone fall down once or twice but not something bad. I have the silicone cover and screen protector. If it was a hardware problem i believe that it shouldn't work at all even if you had to use the hardbuttons. Which that was how i would have to use to unlock the screen. I will go back to the factory rom and settings to see if there is any difference. My current rom is AthineOS 3.14 and Radio 2.15.50.14.
If for any reason you want to access your cellphone and you don't have time go through troubleshooting. I Suggest you download mymobiler which connects the phone and you can use it through your pc. Make sure you take the sd card before you connect. Here is the website www.mymobiler.com
In my case, my phone was RIP. The touch screen stopped working after installing a custom ROM. I installed the latest official ROM from T-Mobile and my phone and came back to life
hi all
my htc touch elf (P3450) display turned to white with black patch at one place & some lines all of a sudden. it was working all fine. i was charging when a call came. i disconnected recieved the call. after that the screen turned white
Tried restarting but no result.
I can hear the notification of a message coming. but no ringing tone when i tried calling from other number
Please bail me out.
regards
Hardreset could be the solution
not resolved
i cannot see anything on the screen except white screen with black patch.
i tried hard reset with imaginary screen but not resolved
i see no visible screen cracks
how to check if screen is crack?
It may be that the LCD is cracked, thats what it sounds like to me, anyways. Check the connector as well though to make sure it is all connected correctly.
The white with black patch does sound broken to me though (Sorry!)
Stu
Hi Stu, I just received my friend's ELF. His display turn white, but the device still be able to receive phone call. trying to enter bootloader, all I get is white screen with some black-horizontal-thin lines. Tried to hard reset, now it seems the device is on phone setup position so I can not get anything.
Is this LCD issue? Could it be broken? FYI, before this happen, there's already one dead pixel on the screen.
BTW...is it possible that upgrading to cooked ROM can bring LCD broken? may be, unsuitable ROM?
regards,
Bom81
Not sure if flashing a cooked rom would kill the screen - although I would say thats very unlikey.
It does sound like the sceen is broken, theres one way to find out - If you don't mind giving it a go - you could always try your screen quickly in his phone - I'd imagine you're fairly familiar with the internals by now
(I do have a spare screen laying around now - JTAG is no longer able to pick up my bricked elf at all - full battery etc how I was doing it no longer works - guess it is dead for sure now!)
captainstu72 said:
It does sound like the sceen is broken, theres one way to find out - If you don't mind giving it a go - you could always try your screen quickly in his phone - I'd imagine you're fairly familiar with the internals by now
(I do have a spare screen laying around now - JTAG is no longer able to pick up my bricked elf at all - full battery etc how I was doing it no longer works - guess it is dead for sure now!)
Click to expand...
Click to collapse
Hahaha..LOL, Today I did want to put my LCD on my friend's elf. but I forgot to bring the opening tools to my office. guess I'll do it tomorrow and see how it goes. I'll let you know after my experiment with this thing.
A little bit Of Topic on this thread, I think so, your device has problem
so even the JTAG method will not be able to connect to the processor. Too bad you're in england, otherwise, the spare screen could be very useful here. LOL
UPDATE
ok..confirm the LCD is broken. I've changed the LCD with mine, and the device is working fine. i guess the dead pixel is the cause of the problem.
Should be able to find one cheap enough on ebay - I do seem to find it cheaper to buy another faulty one (maybe even bricked) as long as the screen is working
Need help on my HTC Touch
Hi Guys,
I really need your help badly. I have an HTC Touch (Elfin), I presume (128/256MB). The problem is i have downloaded the official windows mobile 6.1 rom and extracted the .exe file using Winrar. After which, i copied all the files to the sd card and renamed the .nbh file to ELF0IMG as instructed in the forum.
I put back the sd card and pressed the camera button and the power button at the same time. When it booted up it says reading from SD card and I can see that it is extracting the roms and ext roms. Afterwhich, there was a progress bar and then soon after a while screen turned to blue and then white. Currently now, as I am tying this the screen is still white. Please advise me asap in what to do? Thank you very much.
kss1 said:
hi all
my htc touch elf (P3450) display turned to white with black patch at one place & some lines all of a sudden. it was working all fine. i was charging when a call came. i disconnected recieved the call. after that the screen turned white
Tried restarting but no result.
I can hear the notification of a message coming. but no ringing tone when i tried calling from other number
Please bail me out.
regards
Click to expand...
Click to collapse
Ur display screen has been broke as simple as that..
Ok. Here is the thing.
I've droped my phone down, straight on the screen, no problems. 5 minutes later, when my brother was trying to play on it the screen turned white, with no stripes.
After 1 month i even forgot i had an htc, found it in my office drawer, and i thought of reinstalling the rom. But before that i pushed very hard on the screen, i took the battery out, pushed it in the battery space and after i started it worked like a charm.