Does anyone know if it is possible to use your headset output to play MP3 and still have my bluetooth connected to answer calls on a Touch Pro2 (T-Mobile)
I think you might be able to do that. I haven't tried this but here is what you need to do:
When you connect your bluetooth headset (i'm assuming you you have a stereo headset) to the phone select properties and disconnect "Stereo Audio" and only leave Handsfree active. This should allow all your media to either play through the speaker or wired headphone.
rippetoe said:
Does anyone know if it is possible to use your headset output to play MP3 and still have my bluetooth connected to answer calls on a Touch Pro2 (T-Mobile)
Click to expand...
Click to collapse
i used a Plantronics Discovery 975, worked perfectly for me.... i got sprint
I have tryed it.. but I will Try again
I went to the Bluetooth settings and did turn off the Stereo setting, but it started to play in Mono in my Bluetooth, Then I Disconnected and reconnected the headset output jack for my MP3's and it played trough the headset output....made a call to my Phone and picked up and when I hung up it went back to playing MONO in my Bluetooth headset and had to Disconnected and reconnected the headset output jack to get MP3’s to play trough headset output
I have a Planitronics Voyager 855 Bluetooth headset
I just cannot find a setting that keep allowing it to play Mono
I am running DeepShinning v.4 on my Touch Pro 2 t-mobile
It is a setting's issue, under advanced settings the audio hands free related settings needs to be unchecked
rippetoe said:
It is a setting's issue, under advanced settings the audio hands free related settings needs to be unchecked
Click to expand...
Click to collapse
you are right, and also that type of bluetooth you have... HTC and Plantronics advices that the Discovery 975 is not compatible with the Touch Pro 2 but it worked perfectly for me and the sound was great, both talking and playing music.
Related
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
I have a lexus with BT (factory bluetooth), I was wondering if its possible to play music from my 8125 through the car's speakers via bt (i installed the a2dp CAB but wen i go to select the handsfree as stereo headset, its grey-ed out and cant select it??)
any ideas?
nadp said:
I have a lexus with BT (factory bluetooth), I was wondering if its possible to play music from my 8125 through the car's speakers via bt (i installed the a2dp CAB but wen i go to select the handsfree as stereo headset, its grey-ed out and cant select it??)
any ideas?
Click to expand...
Click to collapse
You paired them right?
--M
yup, all paired, i useit normally for calls and everything, but i wanted to c if i could play music and use the cars speaker system as "bluetooth headset" and play my music =D
I don't have a BT stereo headset, so I dunno if I'm talking out of my ass here, but I wonder if this would work. Its what I use to listen to podcasts on my BT handsfree.
hmm, strange, wen i turn on the app, no sound comes from the car, turn it off and the sound is normal from speakers of the phone =S
need playing around with?
it may be possible that the built in BT in the lexus might not support it!
nadp said:
I have a lexus with BT (factory bluetooth), I was wondering if its possible to play music from my 8125 through the car's speakers via bt (i installed the a2dp CAB but wen i go to select the handsfree as stereo headset, its grey-ed out and cant select it??)
any ideas?
Click to expand...
Click to collapse
The Lexus doesn't use A2DP (because it's NOT a stereo headset) but the standard headset mode.
Please DO read / follow my articles, ALL of them are cross-posted to the General forum here. In there, I've also posted a full article on all these questions. Read http://forum.xda-developers.com/showthread.php?t=281977 and look for the Wizard-specific comments there.
I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?
Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.
hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.
Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013
"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.
thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.
Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.
Does Wing work with Stereo Bluetooth Headset _ONLY_? One bluetooth headset I have works with Dell X51v, but has no luck with the Wing. Seems Wing requires A2DP(??).
Any ideas?
gbzbz said:
Does Wing work with Stereo Bluetooth Headset _ONLY_? One bluetooth headset I have works with Dell X51v, but has no luck with the Wing. Seems Wing requires A2DP(??).
Any ideas?
Click to expand...
Click to collapse
No, stereo is not required. I have two very cheap bluetooth headsets that both work with my Wing. The wing doesn't require A2DP, but does support it (supposedly).
On that note, is your headset visible in the Wing when you go and search for bluetooth devices (add new) in the bluetooth applet?
The headset works fine with X51v PDA so I know it is functional.
Yes, the headset is visible in the Wing's BT management interface. It can pair the partnership without any problem, when I tried to connect, sometimes I saw the microphone icon appear in the top bar of the screen, but it disappeared in seconds.
When I adjusted the volume, sometimes I heard clicks from the headset, but when I played music/sound, they always came out from the speaker.
What am I missing here? Thanks!!
psyop1 said:
No, stereo is not required. I have two very cheap bluetooth headsets that both work with my Wing. The wing doesn't require A2DP, but does support it (supposedly).
On that note, is your headset visible in the Wing when you go and search for bluetooth devices (add new) in the bluetooth applet?
Click to expand...
Click to collapse
update:
I got the bluetooth headset to work in the phone mode. but not with mp3/movie.
everything from the mp3 players (pocket music and media player) still come out of Wing's speaker...
gbzbz said:
The headset works fine with X51v PDA so I know it is functional.
Yes, the headset is visible in the Wing's BT management interface. It can pair the partnership without any problem, when I tried to connect, sometimes I saw the microphone icon appear in the top bar of the screen, but it disappeared in seconds.
When I adjusted the volume, sometimes I heard clicks from the headset, but when I played music/sound, they always came out from the speaker.
What am I missing here? Thanks!!
Click to expand...
Click to collapse
any solution for listenning to music!?!?!?!?
bt audio is a cab where the music will play on bluetooth
my headset is not stereo, and after i tried bt audio nothing happened.
Am I doing something wrong?
Please help!
Thanks!
Also havng trouble rerouting calls to headset...
Any advise???
I have a Sprint 6900 Touch running the stock version of WM6.1. If I enable the Bluetooth audio gateway using acbToggleBT, to listen to music, the volume is low. Its also low when I enable Voice Command through the Bluetooth headset. If my wired stereo headset is plugged into the bottom of the phone and I enable the Bluetooth audio gateway using acbToggleBT then it sounds great. I have tried several things to figure out what is going on and have come to one possible solution.
I need an application that would force my phone into the headset profile. If I enable the Bluetooth gateway without a headset plugged in I believe the phone is in the hands-free profile and not the headset profile. I know I can do this manually by plug-in in the headset connector but can this be done via a program? I would like to have a program launch the headset profile then launch the Bluetooth audio gateway.
I also posted more information here:
http://forum.xda-developers.com/showthread.php?t=431244
Thanks!