I found a movie on youtube from SE. the guy is saying there is an application update for X2 out since 27.2.2010. Its not a ROM update its a cab file but he says its supposed to affect the dialer and the overall performance of the phone.
go look the video --> http://www.youtube.com/watch?v=PuBab5Yj14A
i dont notice any difference but maybe somone else can. let us know it the things get any smoother.
cabs ported to X1
Really only VulcanDialer and CommManager need to be patched. Everything else is untouched.
Use this cabs carefully, I am not responsible for any bugs in them
MAKE A SYSTEM BACKUP!
another post with cabs
Please, don't install everything you see here! Think a little before installing!
System backup should be your best friend!
1)would i need update to X2 rom before installation??
2)how do i can to compile all CABs in 1 for installation?
ultrashot said:
cabs ported to X1
Really only VulcanDialer and CommManager need to be patched. Everything else is untouched.
Use this cabs carefully, I am not responsible for any bugs in them
Click to expand...
Click to collapse
is the dialer cab uploaded here patched already for use on X1?
malikin said:
1)нужно ли прошивать х2 ром до установки патчей?
2)как можно собрать все cab файлы в один?
Click to expand...
Click to collapse
keep public posts in English pls, so that all can benefit from them
thx
1)нужно ли прошивать х2 ром до установки патчей?
2)как можно собрать все cab файлы в один?
Click to expand...
Click to collapse
1) No, it isn't needed.
2) Unpack setup dll from original SE cab, it installs all cabs from itself.
is the dialer cab uploaded here patched already for use on X1?
Click to expand...
Click to collapse
Yes. It works quite good. Same with CommManager.
Hmm, sounds neat! I might install some of these.
DrakenKorin said:
keep public posts in English pls, so that all can benefit from them
thx
Click to expand...
Click to collapse
Hmm, okay "Mr.Mod" no need for patrollin.
dialer tested no problem on barebone rom even if it can't remove previous dialer of x2 it changes the layout of call log and enables redail
thnx for posting
after using my x2 today with the application update installed i think there is some of improvement. I cant realy be 100% shure but i have a better feleing after 1 day use then i had before in a whole week since i got the phone.
but then again, maybe i just got used of the x2.
Hmm can I install this latest dialer cab over the first release vulcan dialer?
hmmmm... I have this "feature":
Siince there exist new versions of the commmanager (under new versions I understand the 2nd, 3rd and 4th releases of Ultrashot), my device is really strange. I install one of the releases, exept the 1st, which are by the way 300kb instead of the 600kb of the 1st one, and then magically it happens that I cannot access my winMo menue...
Probably it has to do with the installation, afterwards, of the 1%-battery_05cab of gtrab (?). Fact is that only a hard reset is possible if I want to access the menue. (And the device is damn slow).
I saw this, exept with the 1st release, with all all the other releases...
Anyone else with this feature? I run X1O Rom 6.5
zagito said:
hmmmm... I have this "feature":
Siince there exist new versions of the commmanager (under new versions I understand the 2nd, 3rd and 4th releases of Ultrashot), my device is really strange. I install one of the releases, exept the 1st, which are by the way 300kb instead of the 600kb of the 1st one, and then magically it happens that I cannot access my winMo menue...
Probably it has to do with the installation, afterwards, of the 1%-battery_05cab of gtrab (?). Fact is that only a hard reset is possible if I want to access the menue. (And the device is damn slow).
I saw this, exept with the 1st release, with all all the other releases...
Anyone else with this feature? I run X1O Rom 6.5
Click to expand...
Click to collapse
Me too, I'm already made a Hard Reset to gain access again to the Start menu. Do not install the Commmanager. I'm using 826X ROM with Windows Mobile 6.5.5 build 23519.
Bur the dialer work perfect and better than the previous version.
I wish I have seen your comment earlier, eaburger... I lost access to the start menu as well. I am on gtrab pure Winmo6.5 ROM.
does this new x2 dialer support video call?
@simpleguy
Not yet but maybe for the next update they will include it..
My god! what is SE doing so long with the official ROM update?! I am an SE fan since T68i (first SE phone). And bad material quality of X1 realy shook my fondness of SE. And now X2 Update is late. Im starting to hate them. Its a shame couse X2 would be a realy nice phone if it was little more stable and would had somewhat better performance. I hope Hard-SPL for X2 commes soon.
Could you describe every cab functions, please...
I know what do CommManager and Dialer do and that is all.
Thanks in advance.
How can we make them as Default in WM 6.5.X ??
Can the Dialer now make Video call?
Related
Not sure if this is worth sharing, but I thought I would pass it along in case someone could do something useful with it.
http://www.xbeta.cn/thread-7612-1-1.html
anyone translate?
http://translate.google.com/transla...ad-7612-1-1.html&langpair=zh|en&hl=en&ie=UTF8
it is a lil old
Sofa.
Bridge quick release you.
Links
Auto translation with Chinese:
CHT9000 (HTC Hermes 200) world premiere 19,195 template (6.1 kernel) (available for download) ~ (plus Bluetooth patch, ring tones patch)
Version: 5.2.19195 (internal version 19195.1.0.0)
See everyone obsessed leave the core, the HEX??also play some version of, Oh, 19195, the version is false, but this is the real core 6.1 (AKU 1.0.0).
Links:
OEM
ftp://guest:[email protected]/ROM/19195_bingo123/OEM_19195_0123.rar
SYS
ftp://guest:[email protected]/ROM/19195_bingo123/SYS_19195_0123.rar
ROM
ftp://guest:[email protected]/ROM/19195_bingo123/ROM_19195_0123.rar
All:
ftp://xbeta:[email protected]/9000rom/ROM_19195_0123.rar
owlrayyt!! that's good news.. better Start Porting and Cooking!! hope Wizard roms soon have this kernel.. actually, i'm still stuck on the first encarnation of the Touch-Ported rom (my ROM is about 5 months old now).. and i'm eagerly waiting for the WM6.1 roms before i flash again..
so please.. someone port..
thanks..
i would love to see a port to the touch vouge
has anyone reposted to rapidshare? These links are terribly slow
Edit: (at least where I'm trying to access them anyway )
So this is a completely compiled rom for HTC Hermes?
Moths ago I heard that it should be possible to exchange some files in WM to switch to another language, just like it can be done on vista with language packs. Is that true? Would be awsome to check out WM6.1 right now
Rongara said:
So this is a completely compiled rom for HTC Hermes?
Moths ago I heard that it should be possible to exchange some files in WM to switch to another language, just like it can be done on vista with language packs. Is that true? Would be awsome to check out WM6.1 right now
Click to expand...
Click to collapse
since i don't have a hermes, can anyone confirm this is real 6.1 before i spend the time to port it? theres been alot of false positives....
ndn715 said:
since i don't have a hermes, can anyone confirm this is real 6.1 before i spend the time to port it? theres been alot of false positives....
Click to expand...
Click to collapse
not just for hermes.. it's now also available for Prophet.. and it's HOMEBREW! now who has any more doubt?
http://forum.xda-developers.com/showthread.php?t=363578
schap hermes rom is out
http://forum.xda-developers.com/showthread.php?t=363782
so hopefully we will get the cooked cab of the new things inside wm6.1 soon like sms, getting started etc
cruzzmz said:
so hopefully we will get the cooked cab of the new things inside wm6.1 soon like sms, getting started etc
Click to expand...
Click to collapse
Waiting for that too
can anyone tell me if this can be flashed on htc gene... i have wm6 rom by mun_rus.. see my signature.. but if this rom can be used on gene then i can learn to cook and dev touch rom for our gene based on this rom
WM6.1 Professional CE_OS_5.2.20275(Build_20275.1.3.3)Pagepool_32MB Blue_Angel
After some requests for a BASIC version Here it is Enjoy
See below
Ultra_Basic_Virsion If you want A bare bones ROM try my Manila V2 or V3 Without M2DExtrom
Other Info
UC & A2D Capable
Media player 10.3
Pictures & Video (Full directory options)
Lots of reg tweeks
Removed
Welcome Centre
Customer feedback Crap
Apps
FTouchFlo
FTouchFlo config
Clear temp
Mode SMS
PHM Traylaunch
SyncroTime
FDC Taskmanager
WM5 NewMenu
WM5 Storage
WM Player 10
SoftKey Appalet
Adcanced Config
PIM Backup
Eten Zoom SMS
Clear Type Tuner
File Dialog Changer
Font Changer
Pocket tweak
SMSDR Fix
Sap Settings (for car kits)
New SMS
USB_HDD
(plus all the standard stuff you'd expect in a 6.1 Rom)
ExtRom package
ArcsoftMMS4.2.8.1.CAB
HTC Home.2.1_1005.722v2b.CAB
HTC Audio Manager Today Plugin.CAB
MMS_enable.CAB
Office_6.1.AdobeLE.CAB
Netwowk Wizard (auto launch turned off by default)
PacMan2.Invaders.CAB
Quick Menu (You will need to set this up for Clear look set background image to Default_stwater_240_320.gif)
UltimateLaunch.CAB
spb_gprs_v2.20(build487)_magician_wwe_1007_cid.CAB
Tcmdpocketarm.CAB
TcpmpFlashVideoBundle.CAB
Windows_Live_10.6.0034.0800.CAB
zBA_ExtSetup.cab.CAB (some ring tones and reg Tweeks
Guy's All you have to do with this rom is setup quick menu and run network wizard and play
Download ROM
http://www.4shared.com/file/70028232/22ec1662/BA_CE_OS_5220275__Build_20275133_.html
Download EXTrom
http://www.4shared.com/file/66020985/39e7a8a0/ExtROMBA.html
New Basic ROM
http://www.4shared.com/file/69045165/e7a1a1ed/BA_CE_OS_5220275__Build_20275133__Basic.html
Your ROM build are very look like same ROM build in PDAVIET
But congratulate
dvha79_ddt said:
Your ROM build are very look like same ROM build in PDAVIET
But congratulate
Click to expand...
Click to collapse
Thanks I use a lot of rom parts from different rom the base rom was a viet rom and i think the dialer may be yours! Base rom habubi Some sonblack in there too
dvha79_ddt said:
Your ROM build are very look like same ROM build in PDAVIET
But congratulate
Click to expand...
Click to collapse
New Build 20753 in a few days after release
[email protected]
[email protected]
sun_dream said:
New Build 20753 in a few days after release
[email protected]
[email protected]
Click to expand...
Click to collapse
Oh really I'll see it. I think new next build is 20900 ?
Thank you
dvha79_ddt said:
Oh really I'll see it. I think new next build is 20900 ?
Thank you
Click to expand...
Click to collapse
20900 is Aku 1.5 BETA
All 2070x->2074X is Aku 1.4 BETA
20753 is Aku 1.4 Final
MS Time 5/9/2008
thnx Swampy i love this rom!!
mr. dvha79_ddt,
why you never posted your rom here?
Stevo.Mksr said:
mr. dvha79_ddt,
why you never posted your rom here?
Click to expand...
Click to collapse
Yes, I'm only post ROM on PV box because PDAVIET Forum is my house
Now downloading the rom ,,
I'll try it later ; I guess it's well
Thanks swampy395 .
Odd, when it comes to the "Tap the screen to begin" when it first boots up it's not sensing me tapping the screen. I was looking forward to trying this ROM out.
sschrupp said:
Odd, when it comes to the "Tap the screen to begin" when it first boots up it's not sensing me tapping the screen. I was looking forward to trying this ROM out.
Click to expand...
Click to collapse
Hi there friend i found out that it may be FTouchFlo that is the cause!! at screen setup, press soft reset 2-3 times and it will pass ok I am working on next rom at the momment but will remove FTouchFlo from startup MENU and rebuild rom and upload in a day or 2 lets wait and see If there are any other bugs so I can fix them at same time Thanks
swampy395
I have spent a lot of time soft-resetting. Nothing works. The creater should test it himself before.Thanks for nothing.
Incubus1975 said:
I have spent a lot of time soft-resetting. Nothing works. The creater should test it himself before.Thanks for nothing.
Click to expand...
Click to collapse
It Works just fine on my BA thats how i got the images you see in the post so hold your tongue my friend
swampy395 said:
It Works just fine on my BA thats how i got the images you see in the post so hold your tongue my friend
Click to expand...
Click to collapse
Well, than you are lucky. The only reason why I decided to try your rom (i used exploude's 273) was that in your rom Office is absent.I use other soft and I do not need huge Office in ROM. So, I downloaded it yesterday, flashed and at least half an hour I tried to start it this or that way.Nothing. May be it was my bad luck or may be somthing else I dont know. But this is the true fact. So I downloaded BA_CE_OS_5.2.20275(Build_20275.1.3.3) on PDAVIET and now everything's fine. It's up to you to believe or not-I dont care friend.
Incubus1975 said:
Well, than you are lucky. The only reason why I decided to try your rom (i used exploude's 273) was that in your rom Office is absent.I use other soft and I do not need huge Office in ROM. So, I downloaded it yesterday, flashed and at least half an hour I tried to start it this or that way.Nothing. May be it was my bad luck or may be somthing else I dont know. But this is the true fact. So I downloaded BA_CE_OS_5.2.20275(Build_20275.1.3.3) on PDAVIET and now everything's fine. It's up to you to believe or not-I dont care friend.
Click to expand...
Click to collapse
Hi there I do believe you had a problem hence! comment about soft reset? and as i say I will fix the bug in a day or 2 and all will be OK
Thanks
swampy395
P.S. there's no dialer in landscape mode in the pdaviet rom
If you want to fix it, try resetting a couple of times, but you have to tap the screen immediately, especially on the "align screen". I did a couple of soft resets and it finally worked when i pressed the screen as soon as it loaded.
swampy395 said:
Hi there I do believe you had a problem hence! comment about soft reset? and as i say I will fix the bug in a day or 2 and all will be OK
Thanks
swampy395
P.S. there's no dialer in landscape mode in the pdaviet rom
Click to expand...
Click to collapse
Thank you for your patience.I hope your next variant of rom will be just fine. I'm sorry if I seemed impolite. I was just a bit upset.
Incubus1975 said:
Thank you for your patience.I hope your next variant of rom will be just fine. I'm sorry if I seemed impolite. I was just a bit upset.
Click to expand...
Click to collapse
Its OK mate we all have our days, The new build is uploading now just spotted the zoom level internet explorer needs a tweak but i'll get that on the next build not had much time this week Enjoy
swampy395
swampy395 said:
WM6.1 Professional CE_OS_5.2.20275(Build_20275.1.3.3)Pagepool_32MB Blue_Angel
Had a problem with FTouchFlo causeing screen alingment to freeze removed shortcut from startup rebuilt ROM and It's working just fine use FTouchFlo_Config to enable it enjoy
Other Info
UC & A2D Capable
Media player 10.3
Pictures & Video (Full directory options)
Lots of reg tweeks
Removed
Welcome Centre
Customer feedback Crap
Apps
FTouchFlo
FTouchFlo config
Clear temp
Mode SMS
PHM Traylaunch
SyncroTime
FDC Taskmanager
WM5 NewMenu
WM5 Storage
WM Player 10
SoftKey Appalet
Adcanced Config
PIM Backup
Eten Zoom SMS
Clear Type Tuner
File Dialog Changer
Font Changer
Pocket tweak
SMSDR Fix
Sap Settings (for car kits)
New SMS
USB_HDD
(plus all the standard stuff you'd expect in a 6.1 Rom)
ExtRom package
ArcsoftMMS4.2.8.1.CAB
HTC Home.2.1_1005.722v2b.CAB
HTC Audio Manager Today Plugin.CAB
MMS_enable.CAB
Office_6.1.AdobeLE.CAB
Netwowk Wizard (auto launch turned off by default)
PacMan2.Invaders.CAB
Quick Menu (You will need to set this up for Clear look set background image to Default_stwater_240_320.gif)
UltimateLaunch.CAB
spb_gprs_v2.20(build487)_magician_wwe_1007_cid.CAB
Tcmdpocketarm.CAB
TcpmpFlashVideoBundle.CAB
Windows_Live_10.6.0034.0800.CAB
zBA_ExtSetup.cab.CAB (some ring tones and reg Tweeks
Guy's All you have to do with this rom is setup quick menu and run network wizard and play
Download ROM
http://www.4shared.com/file/63407830/8505e9bb/BA_CE_OS_5220275__Build_20275133_.html
Download EXTrom
http://www.4shared.com/file/62988353/34f9b39b/ExtROM_BA_5220275.html
Click to expand...
Click to collapse
swampy395,你是一个ROM修改定制者，但你没有能力做移植方面的东西，我觉得！
a lot of guys want it...
so here it is:
install:
1.) uninstall the "Fix_on-screen slide"
2.) install my "Anti-Fix_on-screen slide"
3.) -> "only optional" install my black dialer once again - if you have the black dialer installed - you can find it under HTC - Blackstone - Applications...
If you are not happy, uninstall my version - then it use your original ROM files insteed and no hard reset is necc.
(language -> my version is i german, but this should also work for all other - let me know if there is a problem).
cu camel
camro said:
a lot of guys want it...
so here it is:
Click to expand...
Click to collapse
... but what is it? You don't describe what you're offering here.
SiliconS said:
... but what is it? You don't describe what you're offering here.
Click to expand...
Click to collapse
sorry - for guys which installed the official fix for "fix on-screen slide" which some guys installed and then they had some problems and don't want to do a hard reset
ex: http://forum.xda-developers.com/showthread.php?t=468478
cu camel
can anyone else confirm this fixes the problem with the video calling?
Psygnosis84 said:
can anyone else confirm this fixes the problem with the video calling?
Click to expand...
Click to collapse
yes - me on my image it has this bug
Thanks so much, Camro !
Your uninstall cab worked. Videocalls are now accessible again
Shame and blame on HTC for this useless "Bugfix" !
Sticky this thread
Thank you Camro.
This also got rid of the problem for me too, which was caused by the slider "hot fix". For reference I'm using WWE 1.19.25581 from the official HTC Hong Kong site.
I suspect this thread/tool will become a lifesaver for many users!
THANKS!!
I ran it and it fixed the problem
Thanks! Worked
Thank you very much.
You will be quite popular I think
Shame on HTC.
This slide fix + the Painting problems on the HD are not acceptable.
So as Camro's ROM is German (and mine btw too), I was not absolutely sure whether I was inadvertantly shooting down the videocall feature, because this Hotfix might have been meant for WWE only.
Although it nowhere says so on HTC's homepage or in the instructions given.
But now as one friend here said he has a WWE firmware and experienced the same problem (and Camro's Anti-Hotfix could save him) we can be sure that this "official HTC Hotfix" has a serious bug !
I only wonder how things like this can happen to a big company like HTC !
Fix a minor bug (I did not really complain about the "slider", which was not working), while at the same time create a major other one.
(btw: Did anyone check, whether their hotfix at least really fixed the "slider problem" ? As I applied the Hotfix around midnight, when I did not receive incoming calls, I couldn't even check that.)
Ain't there no QC at all ?
While a few minutes ago HTC still had the Hotfix available at http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
(but no longer linked to the Support menu) it seems they have just now deleted it !
Apparently they now noticed their mistake.
So let's see what kind of "genuine final" Hotfix they will provide us now.
thank you very much!
that bug realy annoyed me.
but where are we now? the slider is still laggy (i installed your cab without removing the slider fix) or it is ok and you just made the cosmetic rearrangements?
Thanks for the fix. Was annoying to see it on screen. Now looking lovely again
Thanks camro,good work!
After your anti-fix is installed and everything is working again can it be unistalled?
HugoTouchHD said:
After your anti-fix is installed and everything is working again can it be unistalled?
Click to expand...
Click to collapse
YES,
on uninstall - will delete the "new" ROM files and after that your system will copy the hidden (your original) ROM files from your basic image.
the related files are:
Windows\18c460d8_manila
Windows\HTCLTB.png
Windows\Incall_02_B.bmp
Windows\phcanhtc.dll
Windows\rilphone.dll
(BUT - only the cab-install/uninstall can delete the "new" ROM files
cu camel
ghl10000 said:
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
Click to expand...
Click to collapse
Strange...
Seems it's online again and available for d/l via this link - with the same timestamp and no additional comment.
So apparently the same faulty package.
I was almost about to think that HTC might read xda-developers.com and maybe adopt some advice from here. Seems I'm mistaken.
camro said:
YES,
on uninstall - will delete the "new" ROM files and after that your system will copy the hidden (your original) ROM files from your basic image.
the related files are:
Windows\18c460d8_manila
Windows\HTCLTB.png
Windows\Incall_02_B.bmp
Windows\phcanhtc.dll
Windows\rilphone.dll
(BUT - only the cab-install/uninstall can delete the "new" ROM files
cu camel
Click to expand...
Click to collapse
This is about the hotfix itself I suppose (which per instruction I uninstalled first), I meant can I uninstall the "Camel Anti-Fix on screen slider"?
so camro, can you please tell me if your cab do justr cosmetic correction or uninstal completeley the slider fix?
in other words, after installing your cab the slider will be laggy or not?
thank you!
noris08 said:
so camro, can you please tell me if your cab do justr cosmetic correction or uninstal completeley the slider fix?
in other words, after installing your cab the slider will be laggy or not?
thank you!
Click to expand...
Click to collapse
1.) what do my fix for fix ?
my cab overwrite (on install) all "HTC fixed files"
my cab delete (on uninstall) all "files"
the related files are:
Windows\18c460d8_manila
Windows\HTCLTB.png
Windows\Incall_02_B.bmp
Windows\phcanhtc.dll
Windows\rilphone.dll
2.) what do my fix for fix ?
cab the slider will be laggy - as it was before install the HTC (buggy) fix.
if someone wants to play with only installing one of the fixed files ... - let me know.
for me - i haven't feel a laggy problem - i only tested the install to help some users whcih had problems with the HTC fix and unstalling the HTC fix without a hardreset.
br camel
EDIT: if somebody wants to play with single files from official (buggy) fix - here attached all flies from the install.
(not necc. to make reg entries.)
I have Navitel Navigator software in my current, official ROM, but I wish to flash new WWE. Can you extract Navitel from Rus version of ROM and add to WWE? Or get me .cab version of this soft.
Thanks.
http://4pda.ru/forum/dl/post/379543/NaviTel_setup_HTC_LEO_3.2.6.7318.cab
this is an extract of Leo Navitel cab
Actually you don't need Navitel in ROM. Copying & pasting it to storage card is enough.
kiman1 said:
http://4pda.ru/forum/dl/post/379543/NaviTel_setup_HTC_LEO_3.2.6.7318.cab
this is an extract of Leo Navitel cab
Click to expand...
Click to collapse
Big Thanks.
May be you know, where I can get russian default keyboard for Leo?
.
Henry_Lee said:
Big Thanks.
May be you know, where I can get russian default keyboard for Leo?
.
Click to expand...
Click to collapse
http://4pda.ru/forum/dl/post/352690/Football_Touch_HD2_KeyboardNew.cab
I guess that you read Russian. If yes, go to http://4pda.ru/forum/index.php?showtopic=144008 (FAQ section) anf you'll find more regarding LEO russification
Thanks again.
I already found this .cab, but thanks anyway.
I'll try to read this russian thread, but for now I just want to flash cooked ROM for fixing some SMS and notification problem. For this I need to have Navitel and Russian keyboard soft .cab. Now I'll try to flash this ROM http://forum.xda-developers.com/showthread.php?t=606932
Looks like nice.
You could also try my firmware if you need stable WWE with Russian localization: HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
djet said:
You could also try my firmware if you need stable WWE with Russian localization: HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
Click to expand...
Click to collapse
Its intersting, but I need to ROM with Manila and Sense. I tried SPB Mobile Shell and return to standart interface of HD2.
And your ROM has fix for normal working of SMS? I have two serios problem with standart ROM v.1.48:
1. When I tried to answer on SMS I have very slow loading of SMS chat.
2. Problem with notification. After several times of SMS notifications I got silent mode and notification arrived without sound and stuck.
And because this I think will to try ROM with new WM 6.5.3 and without Sense Messaging.
.
Henry_Lee said:
Its intersting, but I need to ROM with Manila and Sense. I tried SPB Mobile Shell and return to standart interface of HD2.
And your ROM has fix for normal working of SMS? I have two serios problem with standart ROM v.1.48:
1. When I tried to answer on SMS I have very slow loading of SMS chat.
2. Problem with notification. After several times of SMS notifications I got silent mode and notification arrived without sound and stuck.
And because this I think will to try ROM with new WM 6.5.3 and without Sense Messaging.
.
Click to expand...
Click to collapse
There will Sense-enabled builds as long as standalone installable Sense version.
My ROM is built from official 1.61 WWE. SMS fix seems to be already present in 1.61fw. At least it won't install as a patch.
6.5.3 for me is rather a toy build. No support, no stability.
djet said:
There will Sense-enabled builds as long as standalone installable Sense version.
My ROM is built from official 1.61 WWE. SMS fix seems to be already present in 1.61fw. At least it won't install as a patch.
6.5.3 for me is rather a toy build. No support, no stability.
Click to expand...
Click to collapse
Ok. When will be make build with Sense?
Navitel doesn`t work properly on HD2, even after the last patch on 30/12/09. It quits with a message kind of: "Not enough memory. About 1,5 Mbytes needed, but only 2,5 Mbytes fragmented memory is available". It occures even when there are more than 180 Mbytes of free memory. Navitel tried to fix this error but unsuccessfully.
Хочу передать привет модератору-мудаку, забанившему меня за 4pda за то, что я сказал, что обновление билда 7318, назначенное исправить ошибку с "нехваткой памяти" на HD2, не работает, и навител на HD2 по-прежнему продолжает вылетать.
Мудер с погонялом GrRusel, или как там тебя подзывают.. Штоб те грОши, которые ты получаешь от навитела, были твоей самой большой радостью в жизни, дешёвка.
Henry_Lee said:
Ok. When will be make build with Sense?
Click to expand...
Click to collapse
An updated build is available in two flavours:
HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
djet said:
An updated build is available in two flavours:
HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
Click to expand...
Click to collapse
Thanks, I'll try to test it at nearest time.
But I don't understand how I can disable your tweaks? I don't using +Àâòîìàòè÷åñêîå âêëþ÷åíèå ãðîìêîãîâîðÿùåé ñâÿçè â ïîëîæåíèè ýêðàíîì âíèç ("SupportOpenSPKInFaceDown"=dword:00000001)
for example. And many, many other things....
Can you post small guide or FAQ for tunning your ROM?
.
kiman1 said:
http://4pda.ru/forum/dl/post/379543/NaviTel_setup_HTC_LEO_3.2.6.7318.cab
this is an extract of Leo Navitel cab
Click to expand...
Click to collapse
is it trial ir registered?
plz send a link to dl in an englisg site.
Anonymous6372 said:
is it trial ir registered?
plz send a link to dl in an englisg site.
Click to expand...
Click to collapse
Of course is unregistered version. If you bought HD2 in Russia you got license card for this with serial number.
Henry_Lee said:
Thanks, I'll try to test it at nearest time.
But I don't understand how I can disable your tweaks? I don't using +Àâòîìàòè÷åñêîå âêëþ÷åíèå ãðîìêîãîâîðÿùåé ñâÿçè â ïîëîæåíèè ýêðàíîì âíèç ("SupportOpenSPKInFaceDown"=dword:00000001)
for example. And many, many other things....
Can you post small guide or FAQ for tunning your ROM?
.
Click to expand...
Click to collapse
Most of the registry changes are documented in changelog. To undo any you should either open the corresponding registry key or search for a specified value. Working with registry is a common knowledge, just search for any guide.
djet said:
Most of the registry changes are documented in changelog. To undo any you should either open the corresponding registry key or search for a specified value. Working with registry is a common knowledge, just search for any guide.
Click to expand...
Click to collapse
Ok, thanks again.
But are you sure that all this tweaks can be changed by the registry?
Henry_Lee said:
Ok, thanks again.
But are you sure that all this tweaks can be changed by the registry?
Click to expand...
Click to collapse
Well, my policy is making firmware as much close to original as possible, so all the changes are revertible. Most of the tweaks do not affect the system as a whole, only a small part of it. The only included patches are HTC's. No 3rd party code or beta quality packages included.
Henry_Lee said:
Of course is unregistered version. If you bought HD2 in Russia you got license card for this with serial number.
Click to expand...
Click to collapse
This is not true. I bought in russia from a official delaer an received only a 15 days copilot trial, but an installed Navitel.
At least end of october till end of november HTC sold in Russia EU-boxes branded to russian. There could be also installed only Russian or WWE east-europe ROMs
This is a full and only german WM6.5 COM2 21901 ROM.
I made this ROM for my personal needs and my old Polaris. To give him a new live.
Thanks to all Cookers/Developers! Without their knowledge I would not succeed finding the present solution.
This ROM was build with Barin's wonderful OSBuilder kitchen and unlike other ROM's, you can dump and recook it. All RGU/DSM files are inside (it's a real signed ROM). Feel free to modify it, to fit your needs! Please share the knowledge with the community. Sharing the knowledge rather than keeping it secret is the biggest improvement.
ROM-Base:
WindowsMobile Build 6.5.x COM2-21901
Polaris Native Kernel 6.5 (101MB)
Polaris OEM 3.19 with (massiv) modifications
Packages from Mega (most), Iolite and Topaz
Some custom packages and tweaks
Q: Why to hell a COM2-Build?
A: I dont like the big buttom bar in COM5. That's all.
Q: What packages are inside?
A: Most of Mega, No Manila2D, EzInput 1.5...download and take a look
Downloads:
Please read Post #11! New ROM: 21901_007 (06.05.2011).
I will give it a try because I was searching a german 6.5 Rom for a long time.
Whats about the 3D-Drivers for the polaris, are they included ?
Happy Holidays
MrGame said:
Whats about the 3D-Drivers for the polaris, are they included ?
Click to expand...
Click to collapse
Sorry,
3D-Drivers are NOT included. Because the used Kernel is incompatible. If I can find a NK 6.5 for the Polaris with 85MB-RAM (current 101MB) enabled, then I can try to build with the drivers included.
c.u.
MrGame said:
I will give it a try because I was searching a german 6.5 Rom for a long time.
Whats about the 3D-Drivers for the polaris, are they included ?
Happy Holidays
Click to expand...
Click to collapse
if you really need a 3D-drivers for Polaris !!! This use
s_marth said:
Sorry,
3D-Drivers are NOT included. Because the used Kernel is incompatible. If I can find a NK 6.5 for the Polaris with 85MB-RAM (current 101MB) enabled, then I can try to build with the drivers included.
c.u.
Click to expand...
Click to collapse
you should first edit the ROM using HTCRIE, after in edit you can add files 3D-ROM Driver files
Hakim Rahman said:
you should first edit the ROM using HTCIRT, after in edit you can add files 3D-ROM Driver files
Click to expand...
Click to collapse
Wich part of ROM should I edit with HTCIRT?
You cannot use 3D-Drivers with the current Native 6.5 Kernel in my ROM. The kernel is hacked to use the area between 85MB -> 101MB as RAM. The 3D-Drivers like to use this area for DDI.
That's the problem. If I'm wrong, feel free to show me the right way.
s_marth said:
Wich part of ROM should I edit with HTCIRT?
You cannot use 3D-Drivers with the current Native 6.5 Kernel in my ROM. The kernel is hacked to use the area between 85MB -> 101MB as RAM. The 3D-Drivers like to use this area for DDI.
That's the problem. If I'm wrong, feel free to show me the right way.
Click to expand...
Click to collapse
sorry I have to straighten, not htcirt but HTC ROM Image Editor , yes it is definitely ruu signed.nbh in ROM which you make with HTCRIE you can add it or subtract the necessary application files survivors trying & good luck
Hello s_marth,
great ROM, I like it!!
But I use Radio-ROM 1.59.44.02, and I had also wakeup problems. Do you have another solution?
The keylock doesn't work. I don't want to use s2u2. Could you fix it?
Matthias
siggilein said:
Hello s_marth,
great ROM, I like it!!
But I use Radio-ROM 1.59.44.02, and I had also wakeup problems. Do you have another solution?
The keylock doesn't work. I don't want to use s2u2. Could you fix it?
Matthias
Click to expand...
Click to collapse
Hi Matthias,
I also had wakeup hangs with 1.59.44.02 (not so often as with 1.59.46.12). I'm using 1.59.42.15 at the moment. Over the last 4 days I had no problems.
What you mean? Keylock or lockscreen? For keylock please have a look at: Einstellungen -> Persönlich -> Tastensperre. It works for me.
For automatic lockscreen I use LockDevice 1.6.
cu
Sven
Hi All,
I found a big bug in my ROM!
Please edit the registry to the values in the code window and take a soft-reset:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\TFLOSettings]
"EnableScroll"=dword:0
"EnableSound"=dword:0
"EnableCube"=dword:0
Setting "EnableScroll" to "0" is the most important!
If it is set to "1", the HTC touch.dll/biotouch.dll conflicts with the WM 6.5 builtin touch driver. Typical symptoms are random short hangs while scrolling and lame phone canvas. After edit and soft-reset you get a real fast device.
cu
Sven
Hi All,
here you find a new version of my german ROM for the Polaris.
Changes:
Titanium only! No more Manila2D inside. For me, it is useless bulk.
Fixed scrolling (post #10).
EzInput 1.5 fixed, Landscape added, US and DE keyboards only
LockScreen fixed, HTC-LockScreen-Enh. removed.
Transcriber, Windows Live, Footprints, Manila2D are only present in the kitchen (you can get by request)
EDIT-07.05.2011:
Switching from package "MEGA_Power" (powerexe.exe 2.28) to "POLARIS_Power" (powerexe.exe 2.14). I hope this was the end of search for the reason of random freezes or "sleep of death".
If you like to cook your own ROM, PM me for the kitchen.
Downloads:
EDIT-07.05.2011: New ROM with essential fix, you should upgrade
ROM: https://rapidshare.com/files/461069339/ROM_21901_007.7z
THX,
for this german rom in the Year 2011.
Rom Flash is done. Now i Test you Rom in the next weeks. I hope ist work for me.
Gruss Lothar
many Thanx to u for this great work. I installed it two weeks ago, and it works great. The only thing what is boring is the time to what until xda has manage contact or sms service. I dont know whats going on, and i installed htcs qwertz tab because all other tabs hasn´t work well. Hope i can help with your great work.
cheers
sorry 1 exception xda freezing if the display is fading away, until i push powerbutton. then booting finalized its work... any Idea how to handle it.
Just downloaded and its wirks fine.But it is possible, to make the icons and text in the menue bigger. 3 icon per line ?
zm
dl1bjy said:
Just downloaded and its wirks fine.But it is possible, to make the icons and text in the menue bigger. 3 icon per line ?
zm
Click to expand...
Click to collapse
You can allways build your own ROM with my kitchen by request. 3 icons per line is the WM default.
cu
skysegel said:
sorry 1 exception xda freezing if the display is fading away, until i push powerbutton. then booting finalized its work... any Idea how to handle it.
Click to expand...
Click to collapse
Hi skysegel,
sorry I forgot to put some modules to slot0. This is fixed in my last ROM (21901_006 from 10.03.2011). I had tested the new ROM over 1 month and got no freeze or SOD anymore.
cu
Little better, or streamline some better!
sleep of death within 5 minutes 3 times.
23.05.11:
Today, only one time
lazomi said:
23.05.11:
Today, only one time
Click to expand...
Click to collapse
Hi lazomi,
please perform a Hard-Reset after flashing the ROM. This action formats the flash and loads factory defaults.
cu
Sven
hi,
i flash mein xda orbit 2 with your ROM_21901_007 few days ago, yesterday i have several times sleep of death only unplug the battery helps...
and yes i made a hardreset after flashing
at the moment i change the settings "Tastensperre" to "Tasten nicht sperren" and no sleep of death so far
what can i do?
p.s. sorry for my bad english