I flashed my htc opal to win 6.5 last summer and everything worked perfectly fine. Since yester, however, my camera has stopped working. I am thinking about hard reset my phone. Would it reset my phone to the system win 6.5 I flashed or to the original win 6.1?
sth336 said:
I flashed my htc opal to win 6.5 last summer and everything worked perfectly fine. Since yester, however, my camera has stopped working. I am thinking about hard reset my phone. Would it reset my phone to the system win 6.5 I flashed or to the original win 6.1?
Click to expand...
Click to collapse
hard reset will give you wm 6.5
it willll do this
it will erase program data and wat u saved on fone memory...the rom will remain intact
Same answer as above doing hardreset will return ur phone to its default state that is when u flashed that wm 6.5 rom.
Related
everything was fine, no problems with the phone at all, than I installed Duttys 4.1 rom and ever since the camera doesnt work. I got the camera to work once since then by un-ticking the camera tab from the Touch flow, soft resetting, then ticking the tab again but now thats not even working. I have installed 2 diferent roms since then and it still doesnt work. also the photo album doesnt work from that tab anymore but does in the program list where as the camera doesnt work at all.
Any help would be great
Have the same problem myself and have yet to find an answer
I found a guy that used advanced config to change one of the camera settings but I tried it and it didnt work
When you flashed the ROM, did you put the phone into boot loader manually, or did the installation software do it?
the installation software did it
dB Zac said:
I found a guy that used advanced config to change one of the camera settings but I tried it and it didnt work
Click to expand...
Click to collapse
I tried that myself and it worked for a while (a couple days) then the camera stopped working again. That trick has not worked since that first time. I have changed roms a couple of times and still nothing.
dB Zac said:
the installation software did it
Click to expand...
Click to collapse
Same here. Also I did accidentally install a rom with the wrong spl and had to hard spl after installing the rom. I think I went from 1.14 to 1.56 or something like that. I had a green tint to the screen until I did the hard spl. I have installed many roms since then and have not had a problem. I did not have a camera issue before this but the camera did work for quite a while after the spl issue. Hopefully this makes sense what I am saying.
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
dB Zac said:
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
Click to expand...
Click to collapse
No, I have an unlocked telstra phone and I had flashed my rom a couple times without needing to hard SPL my phone and never had a problem with flashing roms or the camera. It was only after I flashed to a rom that needed the phone to be Hard SPL'd and I didn't properly Hard SPL my phone before flashing the rom. I got the wierd "green tint" to my screen and realized that i had incorrectly Hard SPL'd. I quickly realized my mistake and then did it correctly and then the newer rom worked fine. It was a couple weeks later that the camera stopped working. I can't remember if I was on the same rom or not from when I Hard SpL'd my phone.
Sorry if this is hard to follow.
My thought is, did my upgrade without properly Hard SPL'ing my phone damage the camera or is it something else. Again, I have since properly Hard SPL'd my phone and flashed many roms since without a problem except the non-working camera.
well I don't know but I hard SPL'd my phone the day I got it with the 1.56 HSPL and I have used may roms on this phone. The rom I installed when this happended was duttys WM6.1 rom
dB Zac said:
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
Click to expand...
Click to collapse
I was trying to revert to an older Hard SPL 1.14 and install an older rom to see if that did the trick. Anyway, in my haste I screwed up and installed the older Hard SPL 1.14 and forgot to add in the older Rom so I ended up with the green screen of death. I couldn't get it to connect via activesync and put it in bootloader mode and re-Hard SPL'd it to 1.56 and the green screen was gone. I was about to go back to the Hard SPL 1.14 with one of Duty's older pre 1.56 Roms but thought I would check on the camera again one last time.
Now the camera works. Again, this is not the first time I have gotten the camera to work and I have no idea how long it is going to last but it is working and I am not going to mess with it anymore right now. I will leave the Hard SPL 1.56 and Miri's WM6.5 Rom that I have on the phone alone and see how it goes.
I know this is not a complete answer and I don't know if just re-Hard SPL'ng will work but it is worth a shot. Again, I downgraded first 1.14, screwed up the phone the went back to 1.56 and the camera started working again. At least I know that it is probably not a hardware issue as I have no where to send it back to for repair. All is well in Wisconsin for the time being.
Well two things:
1st can you just tell me exactly what you did, step by step. If I understand you correctly, I have already tried this but there may be a step or 2 that I missed. please include the roms you went from and two also
2nd, just called HTC and they said my the #'s my phone still has some warranty left and they will honor it in the states (I will reflash to tesla rom and the stock SPL before I send it)
Thank you for keeping me up to date on what you have done to get yours working. If your camera fails again, just call the # on the US HTC customer service site.
x5-rwk said:
I was trying to revert to an older Hard SPL 1.14 and install an older rom to see if that did the trick. Anyway, in my haste I screwed up and installed the older Hard SPL 1.14 and forgot to add in the older Rom so I ended up with the green screen of death. I couldn't get it to connect via activesync and put it in bootloader mode and re-Hard SPL'd it to 1.56 and the green screen was gone. I was about to go back to the Hard SPL 1.14 with one of Duty's older pre 1.56 Roms but thought I would check on the camera again one last time.
Now the camera works. Again, this is not the first time I have gotten the camera to work and I have no idea how long it is going to last but it is working and I am not going to mess with it anymore right now. I will leave the Hard SPL 1.56 and Miri's WM6.5 Rom that I have on the phone alone and see how it goes.
I know this is not a complete answer and I don't know if just re-Hard SPL'ng will work but it is worth a shot. Again, I downgraded first 1.14, screwed up the phone the went back to 1.56 and the camera started working again. At least I know that it is probably not a hardware issue as I have no where to send it back to for repair. All is well in Wisconsin for the time being.
Click to expand...
Click to collapse
hello there ,
1.14 radio is the problem ,
try to flash new one which is 1.16 in same form
http://forum.xda-developers.com/showthread.php?t=529031
or try to get into 6.1 and then Hard Rest with out Upgrade to dutty ,
seems problem in driver...
best regards
I havent had 1.14 on my phone since the day after I got it...
I am not very good at step by step instructions but you have obviously done a lot of flashing already, I will keep it short. Again, this started out as a botched attempt to downgrade my Rom to an older WM 6.1 Rom using the old 1.14 Hard SPL. You might not want to do this as it will temporarily screw up your phone. If you do, here are the steps I took. Really not too involved. Please read all steps first.
1. I synced my phone and downloaded the older 1.14 Hard SPL and flashed it.
link
2. That screwed up my phone "Aweful Greenscreen effect" and was not able use activesync anymore for flashing. I then put the phone into bootloader mode by powering off the phone. Hold in top power button until it asks if you want to power down. Yes. Then when you power up hold the volume down key and the power button at the same time. Make sure your USB cable it still plugged in. Your phone should now be in bootloader mode.
3. I downloaded the most current Hard SPL 1.56 and ran the HSPL Wrapper Blackstone 156OliNex
4. After that the Green Screen problem was gone and when I checked my camera it worked. I took a couple of photos and no problem. I opened it first with the WM Camera Program button then with the Manilla tab. When I used the Manilla tab it had to map the camera/videocamera button as we as find the photo album. After that it has showed up in Manilla normally every time I go back to it. Again, we will see how long this takes.
Thanks for the info on possibly being able to return the device for warranty reasons to HTC.
Hopefully this helps and my links work.
if you don't mind me asking, what dutty rom did you install because this all started for me when I insalled duttys 4.1 WM6.1 rom
Update
When I said I took the phone all the way back to stock, it wasnt 100% true. I loaded a stock HTC rom not a telstra rom.
with that being said, today I got the RMA # from HTC to have the phone repaired so I downloaded the newest updated Telstra Rom and loaded it onto the phone.By the way, My phone did not have the newest Telstra rom on it ever! When the phone was done, I started to prepair to load the newest stock SPL to go along with the rom when I notice the camera works..... What the hell?!?! I try loading a custom rom on it (miris 6.5 rom), camera still works! Hard reset the phone, camera still works. I don't know what this means but my phone is back on line with all features!
Thanks for everyones help and input
Keep your eye on it. It is almost like it slowly looses the connection to the camera and then has a hard time remaking the connection once it is lost. Then you have to do something drastic to get it back. I wouldn't mind so much if it only happened every three or four months but so far I have not been able to keep the camera going past two weeks without loosing it again. Keep me posted if yours goes out again.
Well that didn't take long. Camera is dead again. Going back to WM 6.1 and SPL 1.14 to see if that makes a difference. "unable to initialize" then camera and album disappears from TF3D.
What I ended up doing ( and I did it more then once cuz I tried to load a wm6.5 rom on it) was as fallows
starting with many different wm 6.5 roms, radio: 1.13.25.24 and HSPL 1.56
step 1: I flashed the newest telstra rom (Telstra_WWE_1.59.841.6_Radio_52.64.25.34_1.14.25.24)+
step 2: hard reset
step 3: flashed this custom 6.1 rom (gave up on trying to find a 6.5 rom that worked), L26 ultimate V3.55
step 4: hard reset
step 5: synced to my PC
step 6: loaded all my cabs (soft resetting after every 2 or 3)
Now Miris 6.5 V26 came close to working but when I would sync via PC or Microsoft My Phone it the camera bug would come back.
I am at about 18 hours without the bug. I have soft reset, changed the battery, synced the phone to my PC, called, received calls and text so far...
I seem to be having a problem with all of the WM6.5 Polaris ROMs. Hoping someone can help!
I first noticed the issue with Gullum's Rom, though it is still present with Belial's and Pcarvalho's
Basically soft-reset doesn't work. It will result in a hard-reset almost always. It doesn't matter if i use the soft reset pinhole or whether i use a program on the Polaris to soft-reset the device; the result is always the same - a hard reset.
In all circumstances I flashed the rom, waited until the screen alignment, hard reset (on purpose), then configured the phone.
Originally I thought the issue was because of pimbackup getting stuck sometimes and me resetting during that but it seems that even if I do not use PIM backup the phone will still hard reset it self.
The only thing that I can see being common is that the roms are all WM6.5 and all build 23016. When I downgrade to 3LIT3III (WM6.1 rom) the problem seems to go away - though I would prefer the 6.5 roms.
My phone has been flashed lots of times over the past 18 months and maybe something weird has happened. My next steps are to reflash the latest official HTC ROM in the hopes that fixes any weird things my phone might have before I try again.
If anyone has any suggestions I'd really appreciate them!
Thanks,
Dom
dlotters said:
I seem to be having a problem with all of the WM6.5 Polaris ROMs. Hoping someone can help!
I first noticed the issue with Gullum's Rom, though it is still present with Belial's and Pcarvalho's
Basically soft-reset doesn't work. It will result in a hard-reset almost always. It doesn't matter if i use the soft reset pinhole or whether i use a program on the Polaris to soft-reset the device; the result is always the same - a hard reset.
In all circumstances I flashed the rom, waited until the screen alignment, hard reset (on purpose), then configured the phone.
Originally I thought the issue was because of pimbackup getting stuck sometimes and me resetting during that but it seems that even if I do not use PIM backup the phone will still hard reset it self.
The only thing that I can see being common is that the roms are all WM6.5 and all build 23016. When I downgrade to 3LIT3III (WM6.1 rom) the problem seems to go away - though I would prefer the 6.5 roms.
My phone has been flashed lots of times over the past 18 months and maybe something weird has happened. My next steps are to reflash the latest official HTC ROM in the hopes that fixes any weird things my phone might have before I try again.
If anyone has any suggestions I'd really appreciate them!
Thanks,
Dom
Click to expand...
Click to collapse
flash original htc rom and then wm65...should fix this issue...cheers
pcarvalho said:
flash original htc rom and then wm65...should fix this issue...cheers
Click to expand...
Click to collapse
Hi, I've done that and so far it all appears stable... but I'm worried that by saying this I've now jinxed myself
Thank you for your suggestion! If only 'Microsoft My Phone' could restore text messages faster than 1 every 3 seconds... 3500 to go!
dlotters said:
The only thing that I can see being common is that the roms are all WM6.5 and all build 23016. When I downgrade to 3LIT3III (WM6.1 rom) the problem seems to go away - though I would prefer the 6.5 roms.
Click to expand...
Click to collapse
Exactly the same for me. Have tested the "[10 Aug] WM23016_MEGAPACK_ByBelial_BETA, "[Aug 14] PDAVIET ROM WM6.5 Manila 2D (Core 21840) by TranMinhMan" and"pcarvalho eXtreme ROM 3.19 WM6.5 OS 5.2.23009" and all of them was very unstable with 3 to 5 HR pr day.
Then flash to 3LIT3III (WM6.1 rom) and it vent solid as a rock.
I'l test flashing back to original before installing 6.5 again. Thanks for the tip.
I've noticed the same problem too and this tip fixed it (so far). My sequence of flashing is slightly different but the usual suspects were all there. My question is, is it always better to flash original HTC ROM first before flashing a new cooked ROM? Or will it make no difference?
lz8028 said:
I've noticed the same problem too and this tip fixed it (so far). My sequence of flashing is slightly different but the usual suspects were all there. My question is, is it always better to flash original HTC ROM first before flashing a new cooked ROM? Or will it make no difference?
Click to expand...
Click to collapse
its always better as you will flash a rom to a standard rom...every device has/had an original rom to start with...so all settings are...reset
For sure
After a couple of days usage now the phone has not hard reset itself at all - which is awesome - as is your ROM (I'm using the non-3D 23106 build of yours and haven't noticed any issues that a 'soft' reset doesn't resolve )
dlotters said:
I seem to be having a problem with all of the WM6.5 Polaris ROMs. Hoping someone can help!
I first noticed the issue with Gullum's Rom, though it is still present with Belial's and Pcarvalho's
Basically soft-reset doesn't work. It will result in a hard-reset almost always. It doesn't matter if i use the soft reset pinhole or whether i use a program on the Polaris to soft-reset the device; the result is always the same - a hard reset.
In all circumstances I flashed the rom, waited until the screen alignment, hard reset (on purpose), then configured the phone.
Originally I thought the issue was because of pimbackup getting stuck sometimes and me resetting during that but it seems that even if I do not use PIM backup the phone will still hard reset it self.
The only thing that I can see being common is that the roms are all WM6.5 and all build 23016. When I downgrade to 3LIT3III (WM6.1 rom) the problem seems to go away - though I would prefer the 6.5 roms.
My phone has been flashed lots of times over the past 18 months and maybe something weird has happened. My next steps are to reflash the latest official HTC ROM in the hopes that fixes any weird things my phone might have before I try again.
If anyone has any suggestions I'd really appreciate them!
Thanks,
Dom
Click to expand...
Click to collapse
You just said what I wanted.. same thing.. 23016 build Pcarvalho's rom. Sad..
tcfanboy said:
You just said what I wanted.. same thing.. 23016 build Pcarvalho's rom. Sad..
Click to expand...
Click to collapse
Pcarvalho's suggestion of flashing an original HTC rom is perfect - works well.
I m all new in windows mobile smartphones and now I have a problem. Well, almost every time I try to change my desktop wallpaper (either "weather" or "lock screen") my phone freez and I have to reset it with the red button that is under battery case (is it hard-reset??). I m not sure what to do and what is happening. I updated my phone with the updates from the official HTC page. I have installed HD2 tweaks, SKTools, SPB backup, SPB time, SPB brain something, ZUMA and Galarm - maybe some of these applications???
Tnx and best regards,
mislav
it's called a soft reset
when you wipe the data from your phone that's a hard reset.
what rom are you on? custom/stock?
cgrec92 said:
it's called a soft reset
when you wipe the data from your phone that's a hard reset.
what rom are you on? custom/stock?
Click to expand...
Click to collapse
I m using stock rom...i think it worked nice till now. I mean, first i started using my phone I tried few times to change wallpaper and it worked fine, and now it sometimes does and sometimes it freez...so I think it s maybe due to installed programes...
normal issues on the HD2..... freezes.. gets choppy/slow...yes frustrating... such a beauty and all those problems.. who to blame?
i had those problem too but flashed to energy rom and haven't seen since then so i would recommend that , b/c stock rom that hd2 comes w/ is buggy so u might wanna think about flashing
I got answer...I removed Galarm I installed previously and now everything works perfectly...
TNX, guys...
One more question..if I flash my mobile is there a way to get back previous, original version?
tnx again
Hy everyone;
Because i am not allowed to post in the development forum i had to post my problem here...
I had the "HD2O© v1.14 WP7 BUILD 7.0.7392.0 NODO" ROM and now want to flash "blackSideSeven v2.05.7592".
I execute the "Task29" Utility. And made a HardReset.
Then i installed the Mango ROM like i did it by HD2O before in the MAGLDR.
But now the problem is that only the HTC Screen appears and nothing else.
I also installed it a second time, same problem...
What can i do?
EDIT: Now i flashed HD2O again and it works perfect.
So, only blacksideseven not works...
_______________________
i know...bad english^^
I had the same problem with the latest XBmod ROM. After installation it just stops in the HTC screen.
I also didnt get help so far...
Did you try another Mango ROM?
Maybe you take out your SDCard, format it with some proper format tool to make it clean.
then you reformat the fone with task29.
then you try again.
its also 2.06 out now. try that.
I can just say for myself that I only tried the XBmod ROM. I did Task29 etc... SDFormatter... nothing!
I dont have a SD Card in my HD2
I do find it kind of odd that I'm unable to flash mango again. It all started when I decided to flash blacksideseven 2.06 rom from elfinlazz mango, which has been working. I've always been able to flash WP7 without ever having to do task29. Well, in the process of flashing blacksideseven I had a problem as it was throwing an error everytime it reached part.004. I tried it two more times with the same result. Then I moved to a different port and successful on the second attempt. It never worked as either it was caught in a boot cycle or it was just freeze at the HTC screen. I decided to do task29 and reflash magldr and the rom again but still can not get in. I tried elfinlazz rom again and then Yuki's but still no luck. Changed SD cards and nada! So as of right now I'm currently starting everything back from scratch by doing task29 and then magldr and stock 6.5 and then back to mango to see what happens.
P.S. As I'm writing 6.5 started up with no problems! Need to charge the phone because I've been at this since last night. I hate this!
Edit: It worked. But, you know what? I think I'm staying with 6.5 now. I mean WP7 was fun for me for 6 months that it was on my phone from dft original all the way up to mango beta 1. I found myself using my android side more often than WP7 every since Mango because I needed something reliable as WP7 mango had issues due to its beta stage. Not even 20 minutes passed before my WP7 got a no sim error! I thought I needed to restart it anyways and on the subsequent boot up it rebooted 5 times before it got stuck on the htc screen for 35 minutes. Another manual reboot worked but 20 minutes later it just went to no sim error again, so I decided i'm not gonna take this headache anymore! Elfinlazz rom previous was good but there were certain things I needed like data that didn't work 100% of the time. Again, it was fun. I believe I may go back some day. Hopefully somebody will work out the SD card issue because I believe this is the main problem I have with WP7. Maybe some workaround in the future. Good luck guys!
Now i have installed http://forum.xda-developers.com/showthread.php?t=1157535 and it works without problems...
Thats the ROM I had before trying to flash Blacksideseven. It was fine for a few days and then after that the data stopped working regularly. Then about a few days ago data disappeared entirely! That is what prompted me to try a different ROM. Now I'm stuck back with 6.5. Eww! Now it reminds me of how clunky this OS is. Been on it for few hours and I'm missing my WP7 already! Thank god I still have my android.
I flashed tytung Beta 9 of Android 4 and whole nightmare started.
Touchscreen aren working sometimes (most times)
In Windows Phone 7, android....I got this weird display acting (cant unlock, pick-up phone call...only sometimes when im lucky)
In Windows Mobile 6.5 no problem, nothing. (Multi touch, everything working fine)
I reflashed HSPL, do Task29, Reflashed rom like 100x times (winmo back to droid to wp7 back to winmo)...nothing helps.
Im out of warranty like a month. (Still i cant use that even if i have, because everything is OK when using original winmo rom :/)
Is there any way ? Or its time to grab a new phone ? :/