Related
Is ubuntu possible on our u8800?
http://www.youtube.com/watch?v=xN4c61ETCWg maybe, try it
Without having seen the youtube vid that d3xtr0 linked, I'll post this link:
http://androlinux.com/android-ubuntu-development/how-to-install-ubuntu-on-android/
sebgus said:
Without having seen the youtube vid that d3xtr0 linked, I'll post this link:
http://androlinux.com/android-ubuntu-development/how-to-install-ubuntu-on-android/
Click to expand...
Click to collapse
lit's the same source
It will probably work if this device supports "loop devices" whatever that is? anyone know or tried it succsessfully?
skifyr123 said:
It will probably work if this device supports "loop devices" whatever that is? anyone know or tried it succsessfully?
Click to expand...
Click to collapse
I had no time to try it, maybe later in the week.
skifyr123 said:
It will probably work if this device supports "loop devices" whatever that is? anyone know or tried it succsessfully?
Click to expand...
Click to collapse
It supports loop device. I just tried to mount a loop device with a loop image and it worked.
EDIT: With flibblesan's r5 kernel but it should be supported by stock kernel anyway
You are aware that ubuntu has no proper support for touchscreens; even if it runs you won't gain anything by doing that. When I installed a linux a few months ago on another device it worked, then I was fascinated about one minute and then I decided that there is no use for it an deleted it eventually.
I just do not understand why it is so important to get a desktop-os running on a smartphone. Battery drains fast, no support for the radio etc.
XphX said:
You are aware that ubuntu has no proper support for touchscreens; even if it runs you won't gain anything by doing that. When I installed a linux a few months ago on another device it worked, then I was fascinated about one minute and then I decided that there is no use for it an deleted it eventually.
I just do not understand why it is so important to get a desktop-os running on a smartphone. Battery drains fast, no support for the radio etc.
Click to expand...
Click to collapse
Its not important, but funny and cool if it works (on this device). How did you do it?
Until recently I still had my old samsung-omnia-winmo6.5-phone. There was an app for linux available; you just had to install an imagefile to the sd-card. The fun did last for a minute and then I realized I cannot do anything with this small screen and that it was pretty much useless.
I think that a lot of people here will just read the topic and think "omg this is amazing, now I can have my desktop-os on the phone, great" and later they realize how much time they just wasted.
If it really is fun for you guys, I won't try and stop you
How about using linux programs? i think that it may be quite useful sometimes... Put honestly... it is just for funright now... but it may be helpful if we could dual boot.... maybe in the future
I got this working, it isn't that slow as you could imagine, firefox takes around 30 sec to start and load the front page. That said, the keyboard works but is way off and impossible to use (I push "d" and "f" shows up and so on).
if anyone understand this the keyboard will be fixed:
In VNC’s xstartup file: $HOME/.vnc/xstartup
You have to add the line export XKL_XMODMAP_DISABLE=1 before
/etc/X11/Xsession or gnome-session (in case you use GNOME)
Screenshot actually taken with an ubuntu tool, I have set the resolution to 1200*800 in the virtual enviriment.
Here is a video with Huawei Ideos X5 running Ubuntu: http://www.youtube.com/watch?v=8SaoneDtNqA&feature=BFp&list=WL01C152CD7D31A7C8&index=1
Will try this later tonight and let you guys know if it works. Just have to work first >.<
The significance of linux running is to have a backup operating system to use on the phone if the Oracle / Google dispute over Java begins to really disrupt the market.
Think also freedombox.org, your own personal, secure and anonymous cloud system as a refuge if a dictatorship emerges or particularly nasty rise of corporatism occurs.
At heart, our U8800's can easily be linux box server with up to 32Gb of onboard storage with wi-fi AND gsm network connections. Being battery operated, if the thought police decend upon your community, you could take it to another place, unknown to the nasty guys, and re-establish mesh network connection to get reports of civil rights abuses out to the rest of the world.
Reason enough to have the capability to run Ubuntu Server edition (or any other Linux Server flavour)?
If you're interested to see what's already possible, even within Android (Linux will deliver more power), install "File Expert" from the market to get your very own web file server, right there in your phone.
-- wrong post just ignore --
XphX said:
Until recently I still had my old samsung-omnia-winmo6.5-phone. There was an app for linux available; you just had to install an imagefile to the sd-card. The fun did last for a minute and then I realized I cannot do anything with this small screen and that it was pretty much useless.
I think that a lot of people here will just read the topic and think "omg this is amazing, now I can have my desktop-os on the phone, great" and later they realize how much time they just wasted.
If it really is fun for you guys, I won't try and stop you
Click to expand...
Click to collapse
You didn't Found a better ubuntu boot-file, x5 faster, keyboard works, WIFI, pre-installed with many programs ( Open Office for work.. etc) easy to use with touch screen. here is how it works: http://www.youtube.com/watch?v=KUG9aC_tH5s
And the files/instructions: http://forum.xda-developers.com/showthread.php?t=962023
Hello Guys,
before I start: My apologies for this, I am not quite sure if I am even in the right Topic.
I think of myself as pretty new to Android, but got some experiences in Rooting, Custom Roms and such. But that is already as far as it gets.
Now my Problem: We lost our BES and now my Company decided to go with Android (SG4 I9505) and I have to make it happen :angel:.
1. I Need some Kind of Freeware tool to administer Android Devices (Basic: find device, delete data, restrict Apps)
2. If something like this dont exist (which I dont think-I just havent found it)), I would Need to know if I can use CM 10.2 as our Standard Rom and before you start rolling your eyes with experimental and such....
I have to restrict the phone solely to Telefone, Exchange and some preselected (mostly travel)Tools. NO GAPPS!!! and I think that nightly CM provides this with no problems
To realize this I downloaded the nightly from 18th, I think. I then added some APK´s into \System\app Folder and installed the ROM. This actually worked fine until I updated to phone afterwards via build in updating tool - all Tools were gone.(what did I miss?)
Now, our Standard is SG4 I-9505.
Any ideas on how I could do this? (I couldnt find what I was looking for)
1. Adminster a fleet of androids (free)
2. Customize a Custom ROM for corporate Identity (How to pre-setup Exchange Boot Logo, Lockscreen, etc.)
3. or customize a ROM to the Point it cannot do much except what is in the \System\app Folder and turn off updates
Any link is much appreciated. Sadly there is sooooo much andoid articles out there that I seem to get lost while searching for the right one. Thanks in advance!!!!
AccEss-dEniEd said:
1. Adminster a fleet of androids (free)
2. Customize a Custom ROM for corporate Identity (How to pre-setup Exchange Boot Logo, Lockscreen, etc.)
3. or customize a ROM to the Point it cannot do much except what is in the \System\app Folder and turn off updates
Click to expand...
Click to collapse
My guess is I'll get flamed for saying this - but here goes.
Android corporate (MDM) leaves a lot to be desired next to iOS, at least as far as I've been able to find. We manage a lot of iPads and obviously minus the custom ROM we've been able to do it all for little to no cost. We've shied away from Android a lot because of the limited MDM control.
But, since you asked:
1. Meraki Systems Manager (and the accompanying app from Google Play)
2. Good luck with that
3. See number 2
I think the reality is you're going to need to do something to the effect of either cook your own ROM and deploy it or use a tool like CWM to create an "image" that you would then restore to the devices. I did that with a batch of 60+ Nexus 7s and it worked out pretty well.
Edit:
With all that said - I would urge your management to reconsider their approach as the world has changed since Blackberry was the only game in town. Yes, still stick with MDM, device location, remote wipe etc. But unless you're dealing with highly sensitive information (exp banking), let people actually USE the device you're giving them. Don't lock it down to where its basically a first generation iPhone. I'm a big fan of giving someone a good tool and letting them use it the way that works best for them, while still keeping the device and more importantly the data under corporate control.
Assuming you have Exchange, does this not provide the management part?
AccEss-dEniEd said:
Hello Guys,
before I start: My apologies for this, I am not quite sure if I am even in the right Topic.
I think of myself as pretty new to Android, but got some experiences in Rooting, Custom Roms and such. But that is already as far as it gets.
Now my Problem: We lost our BES and now my Company decided to go with Android (SG4 I9505) and I have to make it happen :angel:.
1. I Need some Kind of Freeware tool to administer Android Devices (Basic: find device, delete data, restrict Apps)
2. If something like this dont exist (which I dont think-I just havent found it)), I would Need to know if I can use CM 10.2 as our Standard Rom and before you start rolling your eyes with experimental and such....
I have to restrict the phone solely to Telefone, Exchange and some preselected (mostly travel)Tools. NO GAPPS!!! and I think that nightly CM provides this with no problems
To realize this I downloaded the nightly from 18th, I think. I then added some APK´s into \System\app Folder and installed the ROM. This actually worked fine until I updated to phone afterwards via build in updating tool - all Tools were gone.(what did I miss?)
Now, our Standard is SG4 I-9505.
Any ideas on how I could do this? (I couldnt find what I was looking for)
1. Adminster a fleet of androids (free)
2. Customize a Custom ROM for corporate Identity (How to pre-setup Exchange Boot Logo, Lockscreen, etc.)
3. or customize a ROM to the Point it cannot do much except what is in the \System\app Folder and turn off updates
Any link is much appreciated. Sadly there is sooooo much andoid articles out there that I seem to get lost while searching for the right one. Thanks in advance!!!!
Click to expand...
Click to collapse
I currently work in the infrastructure of a good sized corporation. We're using IOS with a mixture of android hardware and there's some good news and bad news for what you want to do.
Good news is, like Jpcurrie said, exchange will handle remote wiping and locking the phone down. you can require the phone to use a PIN, remote wipe and and a bit more. As for locating the phone, Google actually has finally built in remote locating of your device and remote wipe as well. There's a couple good apps out there (lookout) will turn on your GPS and allow you to locate the phone and they're free. If you happen to have a virtualized environment with VMware, you could also use VMware View Horizons which builds in a secure sector on the phone and you can remotely manage which apps and files the user can use. the best part of View is you can use a BYOD model and keep corporate data secure. The biggest issue is if you don't happen to already use a VMware architecture it gets pricey quickly.
Here's the rub now. you want to install your own logos on the bootup which you could do by installing a custom ROM. This will void your warranty on the hardware and as it isn't 100% stable you'll be spending a LOT of time trying to keep a consistent environment.
Like netsyd said, talk to management about an MDM, and the branding of the devices, maybe even talk to them about using a BYOD to reduce costs of hardware and administration of that hardware.
Isn´t Knox supposed to allow administrators to only delete the data that belongs to the Corporate account (emails, calendars, tasks, etc.), or an administrator can still force a full device wipe? Sorry if the questions is too basic, I've tried searching around for info on Knox but couldn't find anything besides press releases.
I'm not a network administrator, I'm just a user and my school secure wifi installs a device administrator.
I'm sorry to deviate the topic a little bit from the original.
At Delta we use Air Watch but it's far from free. You can however manage devices and remote wipe. You can also view installed apps and remove what should not be there. Options for device profiles also. I help maintain these devices everyday. Not Free but an MDM is your best bet.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
long time - no see
Hiya,
sorry I didn t answer - kinda was overwhelmed with this Task.
Wanted still to thank you: I did what you suggestet and wanted to let you know where I am now.
1. Meraki = implemented - now runnning 160+ devices. (at no costs)
2. CM12.1 implemented (without GAPPS/no SU)
3. Standard Image/w Apps defined. (Mostly Offline capable Tools like "here" etc.(which actually reduced costs))
4. Since Android has limited capability to be administered in a "real" professional Fashion we mitigated this issue by creating a policy to forbid the user to temper with the device (e.g. Installation of Software/SU etc) yet to allow the Installation of Software manually by us via creating a ticket. We check the Software mainly for "sanity" and malware and install it if ok.
This has been working so far like a charm for us. None of the user were happy to loose the Gapps obviously - but once they had their Software and settled in, all was ok. For the Administering part: Meraki can tell me if Software is beeing installed without our Knowledge, also we see if SM doesnt speak with us anymore. So, for now, we got the most out of the System and I am happy to say: I got minimal Control in a Quality sense. No no more "KO Critera" - and we have implemented Android. Tracking etc. is forbidden in Germany anyway - so we use Meraki mainly to wipe if lost and to check if someone goes against policy.
What is still open:
- I am still working on a way to have the user enter his credentials and automatically enter These in all respective config files. (haven't had much luck - with the absense of SU obviously.
- a Little cosmetics still open (I am still trying to figure out how the theming really works ... I usually f**k up the Pictures and sounds.... but so far making Progress
- with less and less good Android devices coming out (now, I am probably beeing flamed now ) that suits our needs (open bootloader, known/supported CPUs, removable battery, SD Card Slot) - I think we might Switch by Q4/2016.
netsyd said:
My guess is I'll get flamed for saying this - but here goes.
Android corporate (MDM) leaves a lot to be desired next to iOS, at least as far as I've been able to find. We manage a lot of iPads and obviously minus the custom ROM we've been able to do it all for little to no cost. We've shied away from Android a lot because of the limited MDM control.
But, since you asked:
1. Meraki Systems Manager (and the accompanying app from Google Play)
2. Good luck with that
3. See number 2
I think the reality is you're going to need to do something to the effect of either cook your own ROM and deploy it or use a tool like CWM to create an "image" that you would then restore to the devices. I did that with a batch of 60+ Nexus 7s and it worked out pretty well.
Edit:
With all that said - I would urge your management to reconsider their approach as the world has changed since Blackberry was the only game in town. Yes, still stick with MDM, device location, remote wipe etc. But unless you're dealing with highly sensitive information (exp banking), let people actually USE the device you're giving them. Don't lock it down to where its basically a first generation iPhone. I'm a big fan of giving someone a good tool and letting them use it the way that works best for them, while still keeping the device and more importantly the data under corporate control.
Click to expand...
Click to collapse
Ok, so I got an old Nook Simple Touch. In part because they can be had for such a cheap price on eBay these days and in part because they're among the few eInk based devices that run on Android and can actually be unlocked and more done with them than the manufacturers intended (I've used an old Kindle and man I hate how locked down and generally useless they are.) Actually, I was hoping I could do some neat stuff like setup daydream with weather info and a clock and all on it while the screen was "off" but I guess I forgot that this is a relatively new thing and it looks like it's based on a really really old Android version? Either way, I'm so used to CyanogenMod and its relatively near to AOSP nature that this thing is feeling horribly limiting and unpleasant to use for me.
Anyway, I've been searching around for various guides and such. I've found tools for rooting and putting the Google Market (yeesh, I forgot they used to call it "Market" ages ago.) It seems I needed to update the system to 1.1 for this (I had bootloops until I did, so clearly you have to have the right system version.) It seems there is a newer version or two beyond this though, but I didn't see root tools (I'm still hoping I can do more with this that might require root access to actually do.) Should I be updating beyond that? Namely, are there tools to actually root and all if I do?
Also, in the meantime, I'm running into troubles with the plain and simple fact that neither Google Market nor Amazon's app store installed by these tools work which may not be fixable. The thread on here says to add an account through Youtube first, then go to gmail and manually refresh over and over until it eventually crashes. After probably 15 minutes of this my hands were too tired to continue though. I just don't think it's supposed to take 15 minutes though. When I start the market it doesn't crash like that guide mentions either. Is there any other way to fix this? Is there any point? Obviously the market app is quite old, so perhaps it's simply never going to work? Is there some alternative way to find stuff that actually works on the NST? I thought to do F-Droid, but even it requires a newer SDK version apparently (I'm getting kind of curious what version of Android its base corresponds to. Does it predate 2.2? If so I may be in trouble since I don't think any of the stuff I was hoping I could put on there will go lower than 2.2.)
For this matter, is there a better way I can do stuff like loading apps? I was hoping to at least have a file manager to be able to use do stuff, but they didn't include one. I'll probably have to track down an apk. For now I'm having to actually use the network adb (I installed the version of the tools that was supposed to do adb over USB, but it doesn't even show up as an adb device at all for me to even so much as install a driver, so I guess it's not doing adb over USB as it should. The network method seems to work, though I'm not a big fan of leaving it wide open like that on principle really, yet remembering to manually change it on and off is a pain too.)
I realize this is a really old device and probably it is very limited what I can really do with it, but I was hoping I could at least squeeze a bit of use out of it. In particular, I'm going to need a much better reading app even if I use it for its intended purpose only. When I looked it up I had thought it was a close enough to stock Android that I'd be able to load up most apps I guess and I didn't think it would be so hard to even get anything on it.
Whew!
OK, let's start with basics. You didn't say how you rooted it but if you're working from 1.1 you probably are not getting the best out of the device. 1.21 is the final stock version. If you can get your NST back to stock, I would recommend doing so. Considering what you seem to have done already probably the easiest way to go is to use the NookManager route. Go here. Follow the instructions. There is info there for adding a Gapps package after rooting. But first get yourself back to 1.21 stock. Once that's done you can either use the Search Market tool from the Gapps package, or find apps on your computer and have them show up on the NST via the PlayStore, or side-load apps from the SD card or via ADB (default on that is WiFi with NookManager--you can install the ADB Konnect app and it works fine). There are plenty of alternate readers that run on the NST. I happen to like the stock reader very much, but to each his/her own.
When all that's done, everything depends on what your expectations are and what you want from your NST. There are a variety of kernals out there as well as USB host/audio mods. Although the Android system is old and the display limits what you can do, there are many apps that run well on the device and I personally get a lot of use out of mine, even more now that I have audio. Check out what I've done (second post) and look at what others have done (in the same thread).
There's a lot of good info in this forum on modifications, apps that run well (and don't) and many tips and tricks.
I think I have most of what I need with that actually, yes. I didn't realize from the guides I initially found that you could root or install third party components with a > 1.1 system version. With that stuff I do have a semi-working Google Market now and can actually install a lot more stuff than I thought. I see also my favorite reader app not only works, but apparently knows I'm running it on a device with an eInk screen and defaults to having eInk adaptations turned on.
Is there any way it can do anything like what I had sort of envisioned before btw? Eg on the screen "off" mode have some sort of thing that shows weather or news or something that updates every so often? (Nevermind the clock thing, that's probably a bad idea. I was just wondering about dedicating it to being sort of something like a clock with it plugged in all the time. Now I think maybe I can stop using my tablet for reading and use this instead.)
Nazo said:
Is there any way it can do anything like what I had sort of envisioned before btw? Eg on the screen "off" mode have some sort of thing that shows weather or news or something that updates every so often? (Nevermind the clock thing, that's probably a bad idea. I was just wondering about dedicating it to being sort of something like a clock with it plugged in all the time. Now I think maybe I can stop using my tablet for reading and use this instead.)
Click to expand...
Click to collapse
Sounds like you are having CM lockscreen widget withdrawal
Actually that seems like a job for Tasker. But it would be potentially messy. You'd need to:
1. Clear image in custom screensaver folder
2. Turn on wi-fi
3. Open weather/whatever app to update info
4. Take screenshot and save to custom screensaver folder
5. Close app
6. Turn off wi-fi
At that point when the Nook goes to sleep the info will be displayed on the lock screen. The question is whether Tasker can wake up the Nook and repeat this at desired intervals when you're not using it.
Also, have a look here for something along the same lines. Maybe you'll get an idea.
Ironically on my phone and tablet I keep it really simple. It's just that the eInk screen of the Nook can essentially be "always on" so to speak without draining the battery like mad (since it would only actually need to wake up every half hour or so for a frequent update schedule.)
But, all that said, it just doesn't sound like this is really worth all the effort. I guess I'm actually more used to newer versions of Android mostly rather than CyanogenMod specifically as they just have more power in what these things can do. With the Nook -- even unlocked and opened up -- it really sounds like the amount of time and effort required to even remotely approach such a thing is orders of magnitude higher. Well, that's fine. I had initially thought that I might maybe just use it as some sort of really neat "smart clock" type thing (at $35-ish on eBay you won't find many clocks that could come close to doing what an Android device could theoretically do) but in the end I don't think this is really all that realistic and definitely not worth the effort. On the other hand, now that I'm able to get more stuff actually running on it and open up its capabilities more I'm thinking I could maybe use this thing for something more akin to its original intended purpose: reading. From time to time I want my tablet to be able to do a bit more and I think this can do pretty well everything I care about beyond the basic reading stuff, so maybe I can stop carrying my tablet around all the time. (And for stuff like music I have a dedicated multimedia phone courtesy of eBay that's much better off really.)
Disclaimer: I know this should go in the correct subforum for my device, but I'm having trouble navigating this site, altogether. I only see subforums for a handful of devices. So if there is a better place for this thread, I apologize
Oh, where to begin. My wonderful girlfriend got me this tablet back in october, since i said it'd be nice to have a linux based tablet so i wouldn't have apple telling me what i can and cannot do with my device (she saw that as a hint, even though it was more social commentary, but I'll take it). Anyway, I found the 16GB limitation problematic, so I decided to root it so i could use some sort of sshfs app to create a slow multi-terabyte harddrive space to steam small files (like music) from. Seeing as i had the thing for only a week and it's kind of expensive, even for a nurse, to buy for me, i chickened out and made due with a small 8GB microSD card which i just happened to have laying around.
Fast forward to a few days ago, I ordered from Amazon a 128GB microSD card (also from samsung), and decided to try to make due with that. Only to find out (and, if you're able to help me you've probably met the following issues yourselves) that the seemingly largest apps refuse to let you move them to external storage. Even better, there's some apps like Star Wars KOTOR (2.5GB) that say they let you move them, but in reality they stay on internal storage and create empty folders on the external medium. And then many apps cannot write and read to and from SD cards (like DOSbox Turbo), for reasons that completely stump me (which leads to me having to move dos games back and forth when i want to play one that saves). I then read about this wonderful feature called "Adoptable Storage," and promptly go through all sorts of things to try to enable it, only to find out that, since I have Android Version 6.0.1 from Samsung, that feature was disabled by them. After using the email support to berate them (they don't have a suggestion box), decided to try to come here and figure out how to properly root this device and figure out how to solve my space issue (I have 128GB of space that I need to use, but have no idea how to use it for what i need to use it for). By the way, a small shoutout to Samsung support, despite my very terse response, there clearly was a human being at the other end and this human was very, very civil and said that they'll pass it on as feedback (I got the impression that the employee either had the same issue or at least wanted me to know that there have been alot of complaints about this issue).
Anyway, now that that wall of text is over, this is how far i've gotten.
I know that XDA is reliable, they've had problems in the past with malware, but it was unintentional and the ship has been cleaned. I don't know about anywhere else, so the rooting instructions i find elsewhere i assume are probably correct, but i don't know where to get files for the process that i can trust, outside of XDA (and i'm having trouble finding the files i need, here).
I have a nice little article from techbeasts.com ( techbeasts.com/install-twrp-and-root-samsung-galaxy-tab-e/ ), but I don't know where their downloads came from and how many people checked them out for windows and android trojans and such.
So...
1. Is that article accurate for android 6.0.1?
2. Are those files safe (free from corruption and viruses)?
3. If they're not safe, where can I get safe files?
4. I like to develop programs, and I want to be able to develop apps for android as well. Once rooted, how does one test how their app would work on an unrooted device to ensure the app follows the "proper procedures?"
5. How do I deal with apps that are root sensitive? The point of all this is so that I can keep using my apps, so if they all break because i'm rooted that defeats the purpose.
6. Other than having to be careful with what i do (I've used Linux for years, and I occasionally like to code in assembly), that it voids my warranty, and that screwing up can make for a really bad day, is there anything else that I should know? This is, indeed, my first touch screen device outside of Nintendo products, because my V3xi is fine for me as a phone.
EDIT:
7. Forgot the most important question: How would I go about getting adoptable storage working on this device once it is rooted?
Forward: Given the nature of my question, the URL is absolutely necessary. After I've gotten my "10 useful posts" I'll fix the URL for future viewers.
EDIT2: Decided to take a chance. Ran into some issues finding the "stock firmware" which I ended up having to do. For those that have problem getting TWRP to stick, you gotta flash the stock firmware of the version you have currently installed. I tried to flash the original that it came with, which, for some reason, it didn't like at all.
Oh, and don't turn off OEM mode after everything's done. I assumed that after everything was installed it wouldn't second guess it and i could safely turn it off for added security if any app went rogue or something. Nope, must keep it on, so do regular backups. Turn off auto-updating, etc. I hear there's some sort of app that lets you "update safely." Not sure what it is, but unless you *NEED* it, don't do it.
And as a bonus note (so it shows up in the archives), some apps didn't install right (either google or the app developer's fault, but these apps weren't tied to this process [pokemon go and just about all the final fantasy games]). The kicker about this is is that you will not notice this UNTIL you uninstall the app, and reinstall it. Deleting the data before uninstalling the app will make it unstable. To find the data, i used
Code:
du / | grep "pokemon" > pokesearch.log
, since i knew that there should not have been a pokemon related directory on my droid at the time, since i needed to reinstall pokemon go because it was acting really fruity. Deleting the folders (actually, the last entry contains the rest, so it's easier just to delete the last one) allowed me to avoid the -504 issue (not to be confused with 504).
Code:
[email protected]:/data/data/com.termux/files/home # cat pokesearch.log
4 /mnt/expand/07aa2c40-4a8f-428c-afb9-7495df69eb26/user/0/com.nianticlabs.pokemongo/cache
1192 /mnt/expand/07aa2c40-4a8f-428c-afb9-7495df69eb26/user/0/com.nianticlabs.pokemongo/code_cache
12 /mnt/expand/07aa2c40-4a8f-428c-afb9-7495df69eb26/user/0/com.nianticlabs.pokemongo/shared_prefs
4 /mnt/expand/07aa2c40-4a8f-428c-afb9-7495df69eb26/user/0/com.nianticlabs.pokemongo/files
1220 /mnt/expand/07aa2c40-4a8f-428c-afb9-7495df69eb26/user/0/com.nianticlabs.pokemongo
Message me if have the same tablet on a system root
Sent from my SM-S907VL using Tapatalk
denakor said:
Message me if have the same tablet on a system root
Sent from my SM-S907VL using Tapatalk
Click to expand...
Click to collapse
We can talk here for the benefit of the community. Any problems you might have should be documented for the sake of the community. But, yes, the -504 error i mentioned above can only be solved through root, so, yes, i was successful.
Kohlrak said:
We can talk here for the benefit of the community. Any problems you might have should be documented for the sake of the community. But, yes, the -504 error i mentioned above can only be solved through root, so, yes, i was successful.
Click to expand...
Click to collapse
I have the same tablet
---------- Post added at 09:32 PM ---------- Previous post was at 09:28 PM ----------
keith thibodeau said:
I have the same tablet
Click to expand...
Click to collapse
Tablet just updated itself after I tried to root it .. MM 7.0.1 but I didnt ask it to
I disabled automatic updates (from settings and google play, 'cause it's in both places) to prevent this problem. There might be a new firmware for the tablet, but i'm sticking to this version. I'm not sure you can downgrade after you upgrade, though. You can take a shot, though, if you're not afraid of loosing data. I doubt this process will brick as long as you can get the official firm ware on backup incase something goes wrong.
Kohlrak said:
We can talk here for the benefit of the community. Any problems you might have should be documented for the sake of the community. But, yes, the -504 error i mentioned above can only be solved through root, so, yes, i was successful.
Click to expand...
Click to collapse
Now it seems impossible to root without pc
Using the Janus vulnerability, you can swap out the classes.dex from apps without tripping the Android security features. This works up until the November patch versions on the KEYone.
You can use this to swap the classes.dex of system apps, e.g. the Updater, and make it do whatever you want (with system rights). Just decompile the Updater APK, make your modifications, compile it back and attach the modified classes.dex to the original APK (downloaded from your device). Then "update" the app via adb / pm.
Any progress?
Actually this sounds not that bad, this would be a "key feature" when buying an Android phone, no root is an absolute no-go for me.
On the other hand I really would like to get hands on a KeyOne, not as "daily driver" (I still love my Q10 and I have a second as backup), but in addition. Why I want to have "root"? Just simply to be able to make full, local backups from the phone and because I want to decide, which software is running or even installed on my device!
BTW: Are there older and current ROMs for the KeyOne to be downloaded somewhere?
Thanks a lot, regards,
thgxda said:
Actually this sounds not that bad, this would be a "key feature" when buying an Android phone, no root is an absolute no-go for me.
On the other hand I really would like to get hands on a KeyOne, not as "daily driver" (I still love my Q10 and I have a second as backup), but in addition. Why I want to have "root"? Just simply to be able to make full, local backups from the phone and because I want to decide, which software is running or even installed on my device!
BTW: Are there older and current ROMs for the KeyOne to be downloaded somewhere?
Thanks a lot, regards,
Click to expand...
Click to collapse
I feel the backup pain, however - the difference between data backup (easy) versus full system backup - really is it necessary? Or just a "want to" item? (you have to answer that one for yourself...)
AFA the ROMS list, there is a good write up over on Crackberry about that:
CB-how-upgrade-downgrade-keyone-beginners
NOTE: there are many (!) variants of the KEYone - and so many variants of what's out there. NONE allow root. That goes against the very thought of being "secure" - but heck, your Q10 doesn't really give you root access - all you can do is use the leaked versions of whatever BB10 is floating around. - I was an early user of BB10, and just got my KEYone because my Passport went sideways... so yeah, I get it. I also know that, so far, other than the want to, I haven't seen much need in actually rooting it (unlike the Huawei that I carried for the better part of a year)
YMMV.
Paisley Pirate said:
I feel the backup pain, however - the difference between data backup (easy) versus full system backup - really is it necessary? Or just a "want to" item? (you have to answer that one for yourself...)
Click to expand...
Click to collapse
for me I can say, that mostly the possibility to make real full system backups and to create a backup of every app with Titanium is the most important reason, getting full root access. For me, that is mandatory!
NOTE: there are many (!) variants of the KEYone - and so many variants of what's out there. NONE allow root. That goes against the very thought of being "secure" -
Click to expand...
Click to collapse
I know, the my hope was, getting a sudo installed, when a bug in Android would make this possible. Anyway I will not get a KEYone, because I do no like the device very much, mostly I do not like the current keyboard, nor the rounded screen.
but heck, your Q10 doesn't really give you root access - all you can do is use the leaked versions of whatever BB10 is floating around.
Click to expand...
Click to collapse
You are absolutely correct, BB10 means no root and mostly no backup of internal data, like SMS or app-data that do not support any backup from within the app.
I do not like this and I don't want this again with my next device. But right now, I didn't found an successor for my Q10. It's currently just the perfect device for me.
Maybe the "KEYtwo" will be a more interesting device, at least the keyboard should be much better, it seems to be similar to one in my Q10. But again, no root access available ...