Related
Im pretty sure theres nothing like this bu why hasent N E 1 tried 2 implement it into WM touch screens? FUNCTIONS= when your on a call a pic and/or number of that person stays on the screen ( like the thumbnail CID option in S2u2). When you get a call the other persons pic/info shows up above it the n the same way except it has a little answer/decline button. If u answer it switches the persons info to the bottom or just highlights it. Also, if you tap one it brings up options like end/switch or especially make both calls into a confrence call(if thats even possible. Its just a thought. Some of u genius programmers could do it easy. S2U2's CID feature would be a beautiful platform/design for somethin like this. Whats your alls thoughts n ideas? Would anyone wanna see this? POSSIBLE? IMPOSSSIBLE? Feedback peopl!
Thanks for starting the segment. Just bought OMNIA II 8GB in India and the problem is when a call comes it is initially very low and the goes up and this cannot be changed through the usual routes. Also the ring itself starts after 3 rings at the callers end. Any help is appreciated.
BTW, Its WM 6.1. Wm 6.5 is not yet available.
bimboybimboy said:
Thanks for starting the segment. Just bought OMNIA II 8GB in India and the problem is when a call comes it is initially very low and the goes up and this cannot be changed through the usual routes. Also the ring itself starts after 3 rings at the callers end. Any help is appreciated.
BTW, Its WM 6.1. Wm 6.5 is not yet available.
Click to expand...
Click to collapse
This is a Samusung WM specialty (or they call it feature). The first 3 secs are always "subdued". It happens with all Samsung WM. Nothing can be done to change it. You just have to learn to get used to it. Look on the bright side, when you're in an office setting, you can usually pickup the call before it gets bursting.
hkwildboy said:
This is a Samusung WM specialty (or they call it feature). The first 3 secs are always "subdued". It happens with all Samsung WM. Nothing can be done to change it. You just have to learn to get used to it. Look on the bright side, when you're in an office setting, you can usually pickup the call before it gets bursting.
Click to expand...
Click to collapse
Should have left the choice to the user. Guess, they must have recvd complaints but have successfully resisted all efforts at correcting themselves. Nice surprise in addition to the half assed UI called touchwiz or whatever. Tks anyway
bimboybimboy said:
Should have left the choice to the user. Guess, they must have recvd complaints but have successfully resisted all efforts at correcting themselves. Nice surprise in addition to the half assed UI called touchwiz or whatever. Tks anyway
Click to expand...
Click to collapse
Yes, agreed with you that they should leave that as an option for user. About the Touchwiz, well , most Omnia 2 users just dont use that. it's memory hogging and doesnt allow creating shortcuts for many programs.
I would say MAJORITY of Omnia 2 users opt for the Spb Mobile Shell instead.
You should really testdrive it yourself, and you will be delightfully surprised how well it integrates and how much smoother the whole i8000 experience is.
i agree that the ring should have been optional. but personally i like it. it saves me from suddenly jerking in surprise when my phone is on top of a table.
being easily irrated, i like the "soft" warning before it gets loud.
hkwildboy said:
Yes, agreed with you that they should leave that as an option for user. About the Touchwiz, well , most Omnia 2 users just dont use that. it's memory hogging and doesnt allow creating shortcuts for many programs.
I would say MAJORITY of Omnia 2 users opt for the Spb Mobile Shell instead.
You should really testdrive it yourself, and you will be delightfully surprised how well it integrates and how much smoother the whole i8000 experience is.
Click to expand...
Click to collapse
I did try the Shell. But what stopped me was the very rudimentary contact program. i have a large database and I absolutely need a t9 search on every field in the contact list which is not there in Shell if I am not mistaken.
Though for some reason Samsung killed the threading of sms, one feature of this touchwiz I find useful though is the search in sms. Guess as a heavy cell user, over the years, I have developed some specific likes & dislikes. Like I absolutely need to see the future appointments on the today screen & launch particular program from today. etc..
mtsingson said:
i agree that the ring should have been optional. but personally i like it. it saves me from suddenly jerking in surprise when my phone is on top of a table.
being easily irrated, i like the "soft" warning before it gets loud.
Click to expand...
Click to collapse
Agreed. But its peculiar. It rings softly first. Then it just vibrates (if u hv vibrate on) but no rings (??? crazy or what ???), then the ringing becomes louder. The whole process takes 5-7 seconds. Now, if u miss these (u can if u r busy or a little distance away from the cell), by the time u hear the louder ring and go to pick up the phone, the caller may go away. It is happening with me.
a solution
to prevent the delay in getting the initial ring, I advice to stop the lock screen from setting/ display and light/ lock screen
then make the device wake up with the lock button only
setting/general settings/ button/wake up/ lock button only
regarding the initial low ring tone, still no solution
bimboybimboy said:
Agreed. But its peculiar. It rings softly first. Then it just vibrates (if u hv vibrate on) but no rings (??? crazy or what ???), then the ringing becomes louder. The whole process takes 5-7 seconds. Now, if u miss these (u can if u r busy or a little distance away from the cell), by the time u hear the louder ring and go to pick up the phone, the caller may go away. It is happening with me.
Click to expand...
Click to collapse
Go into your sound settings (Settings -> Sound Settings -> Ring) and check the alert type. Sounds like you have "Vibrate then ring" selected. If you select "Vibrate and ring", it'll function a little bit smoother.
2ksilverbullet said:
Go into your sound settings (Settings -> Sound Settings -> Ring) and check the alert type. Sounds like you have "Vibrate then ring" selected. If you select "Vibrate and ring", it'll function a little bit smoother.
Click to expand...
Click to collapse
its set at vibrate and ring
msaeed11 said:
to prevent the delay in getting the initial ring, I advice to stop the lock screen from setting/ display and light/ lock screen
then make the device wake up with the lock button only
setting/general settings/ button/wake up/ lock button only
regarding the initial low ring tone, still no solution
Click to expand...
Click to collapse
don't think this has anything to do with locks. Any way mine is set as u hv said. Considering yr suggestion & the another here and that my settings are exactly as u both hv suggested, cud it b that samsung has made such a mess that certain issues are machine specific ? Wudn't that b just great!!!
2ksilverbullet said:
Go into your sound settings (Settings -> Sound Settings -> Ring) and check the alert type. Sounds like you have "Vibrate then ring" selected. If you select "Vibrate and ring", it'll function a little bit smoother.
Click to expand...
Click to collapse
Its already set that way. I think I may have overeacted with initial missing 3 rings. I think I missed it due to some network issue. Thanks anyway.
No fix for 3sec low ring till now..
I just increased the first 3 seconds of my ringtone.. good workaround..
Aafi-rocks said:
No fix for 3sec low ring till now..
I just increased the first 3 seconds of my ringtone.. good workaround..
Click to expand...
Click to collapse
Which part have you worked around?
bimboybimboy said:
Which part have you worked around?
Click to expand...
Click to collapse
He means you can use "Audio Editor" program on PC to increase the volumn of the first 3 seconds of your ringone.
I actually do have (on Verizon i920) a delay of 3-4 rings (at the callers end) before my phone rings or vibrates. I think I have a bad phone as no one else seems to have this issue.
laruku said:
He means you can use "Audio Editor" program on PC to increase the volumn of the first 3 seconds of your ringone.
Click to expand...
Click to collapse
Correct..! or you may also use Mixx Mobile a software to create ringtones on your WinMo phone..
Usually when a call comes and the phone is inside the pouch (good for protection), there are several ways of messing up by accepting or rejecting the call even b4 its completely out of the pouch as blelow:
On screen:
1) U can press the on screen message but which will send an auto sms to the caller and end the call
2) U can press the answer key
3) U can press the ignore key
Off screen (hardware)
4) U press the answer key
5) U can press the end key
Incredibly, all 5 options are simultaneously active. The screen can be locked by S2U2 etc. but I cannot find any option of locking the hardware keys.
Any help will be appreciated
Firstly thanks for Omnia i8000 support on XDA..
Now I feel secure..
Secondly even I'll lyk to disable my hardware keys for call ans/end..
is there a registry tweak or something we can do to disable it..
s2u2 has that option... go settings/phone and u have S2A Hard ans/end key...
Search 542482 - there's an app for that over in the Mobile Apps & Games forum
Solution found!!!!
The issue was really troubling me and I finally found a solution. Install a small program called Incall lock which locks the call & end key. But that will totally disable u from accepting calls under WM6.1. So install s2u2 and enable screen response and voila!! U have. Both these are available elsewhere in this lovely forum.
Note:- The whole process during inplementation is quite messy as u will first have to install .net compact & samsung SDK software (both freely available).
4 software to do a simple thing which should have been taken care of by the OS. That's life under our billy, the goat.
Hope this help. I would be glad to give something back to this site, i have greatly benefited from.
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
ad720 said:
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
Click to expand...
Click to collapse
I tried tpro but it did not work for me. I am using wm6.1 under samsung touchwiz. Cud it b because of that ?
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
bimboybimboy said:
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
Click to expand...
Click to collapse
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
captkkk said:
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
Click to expand...
Click to collapse
Well, as I said I hv 6.1 & 6.5 not yet available in my country. so...
Hi,
I installed Throttle Lock.. Nice lock... it has slide to answer..
secondly it does not interfere with the touch player, lyk s2u2 does..
Are you using Omnia II with WM6.1 ?
Because throttle lock is not saving the settings on my phone. And yes, I am clicking the "ok" button at the top right and getting a message "changes saved". And my slide to answer is ON but no slide is displayed. All I can see is the default lock screen which opens when I click on a button on screen but that certainly does not solve my problem. Using ver .07 (latest).
I have even registered myself. Hell, the config.xml file shows Calllock is on but its not even locking when the call comes. That should be the very basic default function. Sorry, back to s2u2.
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Aafi-rocks said:
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Click to expand...
Click to collapse
Thanks. I unistalled S2u2 and installed again. Still no. Yet the program was working when I clicked on it. So, luckily having some working knowledge of windows, I found that the program is not putting a link in the start menu or start up folder. This I had to do manually. But thats unclean.
And what happens when a call comes is funny. There is a brief fight between the throttle default , the windows splash & the lock screen itself. Luckily, the lock screen is winning every time. But again unclean or is it the links I have placed.
Currenly, I have links to both thottlelock & throttlelockdemon in the startup & lockdemon in the start menu. How is it with u?
Also in the setting under samsung default setup, the options like lock mode & incoming are white on white. What are your current settings ?
Think this program was designed for HTC. But is definitly smaller and though not neat...working. Thanks
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Aafi-rocks said:
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Click to expand...
Click to collapse
Use incall lock for locking the keys when call comes. Works perfectly.
Tried the throttlelock for 2 days. Sometimes, the default wm screen was coming up and the look is messy. So more experiements......but till date s2u2+incall lock looks the cleanest. Will keep looking...
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
maardiweb said:
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
Click to expand...
Click to collapse
I hv omnia 2 with wm6.1. Tried touchlockpro and was absolutely useless. How is it possible ?
Can u plz put in the download link.. Iam sure its somewhere on XDA itself, but I am kinda lazy to search today.... I'll download it once I reach home..
Is it possible to have a slide to call option on the HD2? I hate how easy it is to accidentally dial a number on this phone (then i have to cancel) . I would love to have slide to confirm I want to make a call just like I have to slide to confirm I want to take one. I have looked in the forums, but have not seen anything that is like it.
Just a thought
Thanks
Hey guys, I'm running a Sense build (Phiremod's Ace build) and having a problem with the HTC dialer's answer/reject call slider. (note that this is a problem with any of the Sense builds - not picking on Phiremod's.)
I pocket carry my HD2 and since the Sense answer/reject is an up and down slider, i always wind up answering or hanging up the phone when I pull it out of my pocket.
Does anyone have any ideas to change the incoming call behavior? I know I can remove the HTC lock screen, but the answer/reject slider is apparently part of the dialer (which I love otherwise). I used S2U2 on WinMo, and have been digging around for an Android alternative. Is there any way to get the stock Android answer/reject slider (left to right) on Sense without losing the HTC dialer?
Thanks,
Ryan
+1. Have the same problem
+1, the sense lockscreen makes no sense. Unlocking in pocket, answering can be done just by looking at it from wrong angle...HTC must come up with something quick. Can't even call that a lockscreen
Sent from my HTC HD2 using XDA App
+1
happened a lot of time to me... I'm happy to know that I'm not alone...
Im not sure why HTC made the slide up and down like that it really doesn't make any sense. On the WimMo sense it slides side to side.
Count me in Big relief to see others with the same "challange". In my case it often answers call without me knowing it when its in my pocket.
+1
This is the only reason I avoid Sense. Phone upside down with the screen facing my leg is the only position that works (ie makes it easy to check the screen by pulling it out of my pocket). Unfortunately, that also declines every call I try to answer.
+1 !!! anyone?!?!
solution found!
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
I had this problem also. Just go to system/app and you'll see htclockscreen.apk and htclockscreen.odex. You can rename or delete them but I just moved them to a folder within system/app so they're not loaded. Once done, reboot and you'll get the stock lock screen.
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
omricn said:
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
Click to expand...
Click to collapse
You wanna printscreen that app?
Sent from my HTC Desire using XDA App
omricn said:
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
Click to expand...
Click to collapse
Sorry, omricn. Overlooked that bit. I thought the slide to answer went away because I got the answer/reject buttons but apparently it changes once the phone is actually locked.
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Bib_x said:
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Click to expand...
Click to collapse
are you sure the power button is the issue? how does your incoming call screen look like? it could be the same issue that i had, the slider responded to the insides of my pocket, i dont believe the power button is being pressed unless you're wearing very very tight pants
I don´t have a sense build.
I get no slider, only the answering buttons on my screen. But hardware buttons are working too. When i put my phone from my pocket i often touch my hardware power button and then the incoming call is ended.
I use proximity screenoff, so screen is blank and i can´t touch any button on my display. If i press power button, the incoming call is rejected.
I want to have a slider on my display and hardware buttons should be locked complete. Only answering a call with something on my display, but not with hardware button.
understood.. i'll be sure to let you know if i find a solution
Hi All!
The biggest problem with Sense in my opinion is the slide for unlock/answer screen. The engineer that came up with that design should get a serious *****-slap. Replacing the lock screen is fairly simple though, e.g by WidgetLocker. Replacing the slide (up/down) to answer is not that simple because it's part of the dialer, not the lock screen.
So if you like HTC sense and the sense dialer, I think you have to stick with the slide up/down for answer. I'm sure that some clever dev eventually will iron out the problem, but currently I see no solution.
Agree with every word..