Database Users

Can somebody post the full rom, kernel, baseband version after the official update?

can somebody please post the EXACT build, kernel and softwareversion numbers after the official update?
I'm trying to find out if there is anything new compared to the leaked update.
THANKS!
These are my Build details after the leaked RUU ROM:
Baseband Version:
63.18.55.06EU_6.35.06.18
Kernel Version:
2.6.27-8dd6deee
[email protected] )
Build Number:
2.73.405.5 146733 CL#61267 release-keys
software version:
1.0.0.A6288

Shahpur.Azizpour said:
can somebody please post the EXACT build, kernel and softwareversion numbers after the official update?
I'm trying to find out if there is anything new compared to the leaked update.
THANKS!
These are my Build details after the leaked RUU ROM:
Baseband Version:
63.18.55.06EU_6.35.06.18
Kernel Version:
2.6.27-8dd6deee
[email protected] )
Build Number:
2.73.405.5 146733 CL#61267 release-keys
software version:
1.0.0.A6288
Click to expand...
Click to collapse
THose are the very same numbers as I have. But I used the official RUU.

Thiesen said:
THose are the very same numbers as I have. But I used the official RUU.
Click to expand...
Click to collapse
so even the strange parts like:
"2.6.27-8dd6deee
[email protected] )"
and
"CL#61267 release-keys"
are exactly the same?

I just got my new Hero and a newbie to android. Its factory unlocked, non-branded. I have
Baseband version
63.18.55.06U_6.35.04.25
Kernel
2.6.27-a5504199
[email protected] #521
Build number
1.76.405.6 146733 CL#47214 release-keys
Software version
1.0.0.A6288
Is this the new version. How can I upgrade. Please direct me.

1.76 is definitely the old/original version, update that, either by looking into MoDaCo's updates (in the Hero Android Development forum on these forums) or get the official 2.73 RUU (I think its available from HTC Now).

Shahpur.Azizpour said:
so even the strange parts like:
"2.6.27-8dd6deee
[email protected] )"
and
"CL#61267 release-keys"
are exactly the same?
Click to expand...
Click to collapse
As a matter of fact yes.

thanks for clearing that up.
so i don't have to setup my hero for the third time. (first leaked ruu update didnt work so well - had some connection issues- then i made a hard reset and reflashed the rom with the leaked ruu). so i had to setup the device twice.

How to know rooted Hero was updated properly

Here's the info on my phone after rooting and supposedly updating with freshlyill's 0.4 MR release:
Baseband: 1.04.01.09.21
Build number: 1.56.541.2 CL85027 release-keys
Software: 1.56.651.2
Is this accurate?

That info is correct.

naziroo said:
...
Software: 1.56.651.2
...
Click to expand...
Click to collapse
That's the key right there to know if you've updated.

[Q] Why m not getting HTC Wildfire Froyo Update in Pakistan?

using HTC Wildfire in pakistan with software information:
Firmware version: 2.1-update1
baseband version: 13.45.55.24H_3.35.15.31
Kernel version: 2.6.29-c9472fc1
[email protected] #1
build number: 1.25.708.2 CL227575 release-keys
software version: 1.25.708.2
whenever i check for System software updates there was no update for my phone.
now how to update to Froyo 2.2?
whats the problem with my phone?

froyo is not yet available for your country... and you better reconsider updating to froyo, because you will not be able to root...

cute_kayani said:
using HTC Wildfire in pakistan with software information:
Firmware version: 2.1-update1
baseband version: 13.45.55.24H_3.35.15.31
Kernel version: 2.6.29-c9472fc1
[email protected] #1
build number: 1.25.708.2 CL227575 release-keys
software version: 1.25.708.2
whenever i check for System software updates there was no update for my phone.
now how to update to Froyo 2.2?
whats the problem with my phone?
Click to expand...
Click to collapse
froyo update is not available for our country. as u might know that are very few phones that HTC has officially launched in pakistan and wildfire is not in that list.
however, i would recommend you to flash a custom ROM. because after an official update to froyo, you can not root your phone.

[Q] Stock Rom Version

Hey. I have a Defy+ with the following:
System version: 45.0.2310.MB526.MERetail.en.06
Android version: 2.3.6
Baseband version: EPU93_U_00.60.03
Kernel version: 2.6.32.9-ge281b6e
[email protected]#1
Build number: 4.5.1-134_DFP-231
I have searched and I can find the version of the firmware that I have on my phone. Can anyone tell me where can I find it?

spiridusu said:
Hey. I have a Defy+ with the following:
System version: 45.0.2310.MB526.MERetail.en.06
Android version: 2.3.6
Baseband version: EPU93_U_00.60.03
Kernel version: 2.6.32.9-ge281b6e
[email protected]#1
Build number: 4.5.1-134_DFP-231
I have searched and I can find the version of the firmware that I have on my phone. Can anyone tell me where can I find it?
Click to expand...
Click to collapse
DFP-231 is your firmware version. You have bootloader version 7

I have found here sbf.gz files but none of them are the "45.0.2310.MB526.MERetail.en.06" that my phone has. I`ve also found this list, but I don`t know which of those is mine.
Can I find it somewhere else, or is one of those from the links, mine and I don`t know it?
DFP-231 is your firmware version. You have bootloader version 7
Click to expand...
Click to collapse
I have started the Bootloader and it is vertion 9.10

The bootloader version IS 7-this just means you can't go back to froyo. The sbf for your phone is at: http://sbf.droid-developers.org/umts_jordanplus/list.php and the file name is dfp231, and from them you can select one of your region.
Sent from my MB526 using xda premium

[L5][E310] When I try to root it gives me an error and the phone reboots

EDIT: I made a mistake in the title, the phone is E610.
As the title says that's my problem. I get an error after I launch the bat, I was following that guide.
The phone has the stock rom, I need some help to understand what could it be.
Android version: 4.1.2
Baseband version: MSM7225A-1-AA
Kernel version: 3.4.0
Build number: JZO54K
SW version: E61020d-EUR-XX
I think the problem is the Android version and I have to downgrade with kdz, but it doesn't find the phone for some reason. The drivers are installed.

Alien1993 said:
EDIT: I made a mistake in the title, the phone is E610.
As the title says that's my problem. I get an error after I launch the bat, I was following that guide.
The phone has the stock rom, I need some help to understand what could it be.
Android version: 4.1.2
Baseband version: MSM7225A-1-AA
Kernel version: 3.4.0
Build number: JZO54K
SW version: E61020d-EUR-XX
I think the problem is the Android version and I have to downgrade with kdz, but it doesn't find the phone for some reason. The drivers are installed.
Click to expand...
Click to collapse
Do you have USB debugging enabled?