Related
so im excited to get a 8gb card for my kaiser,so i pop it in and reset...goto memory>storage card NOTHING!pop it out put it in my pc and invalid process!!!WTF?!?!?!help please
Have you tried to format the card from your PC. If that doesn't work you might have a bad card. Sucks but it does happen sometimes.
Also, please remember that these portable handsets are usually not NTFS file format compatible. Be sure when you are formatting that the card is in FAT or FAT32 mode, with default block sizes and allocation.
Also, it does sound to me that your card is defective. I have never had to "format" any flash cards I have ever bought before using them, except a couple old CF cards for my SLR camera.
I got a sandisk 8gb microsdhc myself - and it works great...
(except when one morning I wake up and find out that all the data's gone, and had to recover it with GetDataBack)
I'm no SDHC expert (I've only had 1 for 2 weeks) but I ran into some problems myself...
1) If you're running Win XP on your desktop, you'll need to download the hotfix for SDHC support here (I don't use Vista so I'm not sure if it supports SDHC natively)
2) The card reader I have connected to my PC wouldn't read SDHC cards but the USB reader that came with my SanDisk 8GB MicroSDHC card does work. Make sure the adapter you're using to connect to the PC supports SDHC.
3) Sounds stupid but make sure you're pushing the card all the way into your phone. You should feel some spring pressure and then hear a 'click' as it locks into place. You push it in and it springs out to remove it. I have pretty big fingers and I didn't insert mine all the way the first time. I still have to use something small (the back end of the stylus) to fully insert my SDHC card.
---OR---
You may have a faulty card
mine work!!
s0undw4v3 said:
I got a sandisk 8gb microsdhc myself - and it works great...
(except when one morning I wake up and find out that all the data's gone, and had to recover it with GetDataBack)
Click to expand...
Click to collapse
well..... i got the same MC sandick an dno problems witing...
Here is the WinXP SDHC Update if you don't want to d/l it from the MS Site.
I have a 8GB SDHC Sandisk. I formated as FAT32 winXP SP2 updated and it works perfect on my tytn II and as a pendrive (with the usb adapter included)
thanx for the help guys but i think i have a bad card...
sorry if you've got a bad card . i scored mine (8gb - sandisk microsdhc) off ebay for $45.00. works flawlessly!
I have just copied all of the contents of my 4gb card onto a new 8gb card, no problems so far, but when I put it back into my Kaiser, the volume only shows as a 4 gb, with 1 gb free, which are he details of the old card, any help greatly appreciated
thanks
Trev
hi guys your forum is great cant stop reading.But i have an issue i recently bought an 4gb mini sd card for my phone the card works but is like it works when it feels like if i put it in and wait for a while or just randomly turn the phone off and on it will work i format it using my card reader through windows on fat32 and all the thing is it works but i should not have to be going through all of this for the sd card to work.
My next problem is i recently upgraded to SNN Edition Version 3.0 LITE and i have to say i love it but before my phone could detect my sd card and from i did i upgrade its not detecting my card at all to be on the safe side i took out the card before the upgrade and now its not detceting at all please can any one help me is there a patch i can use or something HELP!!
i think try to format via fat16 option. i had earlier 2gb kingston card sdmini after formatting it works welll
i was doing some reading and i was told that 2gb is the highest for formating with fat16 i have a 4gb card so this cant work for me a even look in properties and the only option is fat32.any body else as any more in puts.
4GB cards are almost exclusively multilayer, and cannot be read by the Wizard's card reader. You are basically limited to 2GB, and it should be formatted as FAT, not FAT32, as was already noted. If there's a 4GB model that's single layer, that's great, but I don't know about it. (...not saying I'm the definitive authority, either...)
which program can i use in windows to format the card in FAT and not FAT32 and as i said before the phone could read the card before i did the upgrade the only thing its takes a while for the phone too detect the SD card and thats in FAT32 format but i will try the FAT format.
from my experience you can't put ANY 4gb minisd card into the wizard and have it work correctly since it uses double buffering which the wizard doesn't support.
you have 2 options.. either buy a 2gb one.. or format only half of the card in FAT ...as myrddin said.. this might use only 1 buffer..
if that doesn't work, you can look for a program which blocks clusters and block half of the clusters on the card. that would certainly work but you won't be able to get 4gb out of that card ever again.
i'd go with the first option.. 2gb cards aren't that expensive nowadays.
well guys i bought the sd card for my phone and i research before buying it and it caused work so there must be a way for this to work even if i have to split it in 2 partitions but i am at work now so when i get home i will work on it (good thing i bought that card reader) lol but i will give you guys an update soon i plan to format the card in fat16 all 4gb if that dont work i am going to split the partition in 2 but i would love a single partition but what ever works.
I have a 2gb SD Card...
Hey guys... i have a 2gb kingston card (micro SD with adaptor to miniSD), but i have the exact same problem... my wizard just stopped reading the card! Sometimes it reads, but suddenly wizard stops, i have to make a soft reset and.... the card is gone... i formated it to fat32 and fat... and it still doesn't work... any idea? thanks
nir36 said:
from my experience you can't put ANY 4gb minisd card into the wizard and have it work correctly since it uses double buffering which the wizard doesn't support.
Click to expand...
Click to collapse
Correct-o-mundo.
Another common problem (related more to card readers than just to Wizards) is that the reader contacts (and even the card contacts) can become worn, dirty, or corroded. Try removing the card and battery, and get in there with a VERY bright light, a magnifying glass, and some cotton swabs dipped in isopropyl. Clean the metal contacts on both card and Wizard. Be careful not to soak the chip. Damp, not wet. Soak the chip and you WILL be buying a new one soon.
Let things dry COMPLETELY before trying anything, or you'll be sorry.
sd card is not vissible
hi all i have 1gb memory card it is not visible in all device i tried in a cam mobile and computer can any give me a idea to use
Hi, everyone -- I'm having an intermittent but chronic problem with the SD card driver on my P6500: occasionally, the P6500 will freeze up while writing to an SD card; sometimes file or directory names on the card show up scrambled in File Manager; I've had instances of files on SD cards being corrupted; and Card Export sometimes freezes because calls to the SD card read/write functions hang.
These issues happen with every SDHC card I've tried, regardless of capacity or manufacturer: an 8GB AData card, a 16GB Patriot card, and a 32GB Panasonic card. _All_ of these cards work fine in other Windows Mobile 6 devices and in card readers. (I haven't tried any standard, lower capacity, SD cards.)
Has anyone else experienced these issues? I'm not sure if this is a problem with my specific phone or if it's a more general issue with the P6500 card driver. And HTC Technical support has been frustratingly useless -- I've sent numerous emails and each response suggests another irrelevant fix or suggests that the problem is with my cards or software I'm using. (The most ridiculous email told me that I needed to use a microSD card!)
Alan
Sedna does NOT support large cards!
The problems reported above seem to only happen with large-capacity cards. I've been trying a 2GB card without problems. And HTC Support confirms that the P6500 has only been tested with cards of up to 4 GB capacity -- which seems ludicrous given that the P6500 is advertised as supporting SDHC! -- so I'm guessing that this is the issue: their drivers have intermittent problems when dealing with higher capacity cards.
The problems aren't consistent: even 32GB cards USUALLY work OK, although Card Export II has to be set to Hermes mode (which slows things down significantly!) in order to work correctly.
Any suggestions? I'll complain to HTC -- it seems like false advertising to promote that the card supports SDHC when it doesn't fully supported cards with capacities greater than 4 GB.
Thanks, Alan
HTC 6500 - finger print reader broken.
I have a Sedna, dropped it, split the ribbon cable that goes to the finger print reader. Have two weeks of data that I need. Does anyone know where I can get a new finger print reader with ribbon cable.
OR does anyone know how to bypass the fingerprint authentication screen, because it seems to be locked in a loop saying scan finger followed by finger scan failed try again, every half a second.
Help please.
Using 8GB & not had a single problem
I've had 8GB (SanDisk Ultra II 8GB SDHC) in the top slot of mine since I bought it & not had a single problem.
I even have an old Kingston 2GB d/v MMC mobile mini-SD + adapter (bought iirc for a Nokia thats long since died) in the side slot & that works like a charm too.
2x 16 GB Kingston No problems
Have had the P6500 for two weeks now using 2-16 GB Kingston SDHCs. Documents and data files on one, video, photos & mp3s on the other. Has worked flawlessly thus far (before buying this I had read the post by Carrot34 and had some lingering concerns but everything's been fine). Planning to upgrade to 32 GB SDHCs when the price drops a bit.
Hi guys! I recently purchased HTC Touch Pro and A-data 8 Gb micro sdhc class 6. My laptop recognizes the card and I format it to FAT 32, so I think the card functions properly. The problem is that the device does not recognize tha card. I updated the ROM with the latest official release from the HTC site , and I was happy finally to see my card. The problem is that after restart, the card is invisible again. Can anyone help me? Maybe the storage card is faulty after all?
Possibly man, i am sure you have another card in there. Test it, if all is ok with it, then exchange your 8GB if possible....
The same thing happened to me; I don't know if it's faulty though. It is recognized at first, and of course I can transfer files from my laptop.
The same thing happened to me; I don't know if it's faulty though. It is recognized at first, and of course I can transfer files from my laptop.
incompatability with SDHC
There is a known partition problem that can destroy your Micro SD (or any other size SD) if you every stuck it into an older reader that does not support newer sizes (any HC, or even standard SDs over 1GB).
Old readers can show your newer SD-family cards, and APEAR to work, until you fill them up past the size the old reader supports.
FOR EXAMPLE:
my old laptop has a built-in SD reader. Back when I used the HTC Wizard, I bought a 2GB miniSD, and dumped files to it from my laptop. Little did I know, the built-in reader only supports SD card up to 1GB. It worked back and forth many times untilI crossed the 1GB line (filled teh SD past 1GB). Then files disapeared or could not be accessed randomly. Kindgston told me it was a known issue of some older devices (readrer/camera/etc): the older device messes up the partition, which you CANNOT fix yourself: reformatting the messed0up partition does nothing. Ship back to manufacturer to fix. Now I'm careful to avoid the built-in SD reader
So I would advise: fill your microSD up aver half-way, and see if you desktop/ laptop has problems accessing files sampled from all over the chip. If it does, this is probabaly your problem.
I think it's just the card/brand itself. The HTC site lists card brands and sizes that have been tested and proven compatible, and the A-Data 8GB isn't one of them (although the 4GB SDHC is compatible). Sandisk is the only 8GB card that's supposedly compatible, and I've pretty much found that out since I had no luck with an A-Data 8GB but the Sandisk works flawlessly.
When I first copied files over to the A-Data and put it in the phone it didn't recognize it at first, but after a couple times of taking it out and putting it back in I was able to read and write to it in TotalCommander, but when I went to play music files the player froze up solid and the card was no longer readable until I did the in and out thing again. Bottom line was there was no way that card was going to work right in the phone, but as soon as I started using a Sandisk I never had a problem.
same thing happen to me
i think the phone will not recognise class 6 memory card
i will try sandisk 8gb class 2 when i got a chance
silly phone
sdhc card problem
chasist said:
same thing happen to me
i think the phone will not recognise class 6 memory card
i will try sandisk 8gb class 2 when i got a chance
silly phone
Click to expand...
Click to collapse
my touch pro two times had the same problem.The sandisk 8gb microsd HC (class2)collapsed.I can do nothing.My computer doesnt recognize the card.I cannot format it also.Does anybody can help me .What can i do.Thanks.
Card doesn't work in my Fuze. Oh well, I'll find another use for it.
Wierd.... I have two Adata 8GB cards, one works in the Touch Pro, the other doesn't. Both of them work in my Sharp EM One.
hi ive been looking like crazy to fix this problem but this seems to be the only post close to it.
i recently got a transcend class 6 4gb micro sdhc (listed on the website as compatible) for my htc fuze. the fuze (WM6.1) has been updated to the new rom version (5.xx).
i put it in nothing happens. it work fine on a computer (via usb reader). i have a kingston 2gb micro sd that works fine (but is used for another device). I really want to get this one to work so its not a waste.
so far ive tried reformatting to FAT, 64K and FAT32, 32K (via windows vista formatting).. none of which work.
really annoying, i dont have any other device that uses this card and i specifically checked this brand and type with the htc fuze and seems like everyone having no probs with it.
any other things i can try? is it a faulty card maybe (but it works through usb reader)?
I am having problems with the 8gb class6 cards as well. I have tried the Adata and the transcend cards. Here are some interesting things I have found.
1. The energyrom series of roms seems to be the only rom that lets me see the card.
2. I can't access the card until it the rom loads.
3. I can flash roms from the card even if I cant access them from the phone.
I did see there was a utility to help load SDHC cards called SDHC_WM6. I was never able to get it to load right but it indicates there is some kind of software driver that might help these cards.
BOBBYDAVIS44 said:
I did see there was a utility to help load SDHC cards called SDHC_WM6. I was never able to get it to load right but it indicates there is some kind of software driver that might help these cards.
Click to expand...
Click to collapse
I saw this utility too.. but its for windows mobile 6 not 6.1.. when 6 came out it had no support for sdhc so that thing came out, 6.1 should have support from the start
of course that didnt stop me from trying it anyway... doesnt work
I have a 8 gb Sandisk- Works flawlessly. I have a 16gb Adata( class 6) that worked for awhile then stopped. Put the 8gb- works, 16gb doesnt. tried different ROM- Still same effect. I has to be the Adata card. I am going to try a 16 gb Sandisk when my funds are available.
Oh- the 16 works fine in the microsd/SD card reader......
SDHC Class 6 works in HTC Jade
I have a jade and both cards that refuse to work with my fuze work just fine with the htc jade. I am not sure if it is a hardware problem or an issue with some software such as the sdhc.dll.
My thought is it is probably software. Why?
First the class 4 cards work just fine. In fact I am currently using a Dane-elec 16gb class4 card.
Secondly I am able to get intermittent class 6 cards access if I use one of the NRGY roms.
I have been using a 8gb Adata card that I bought from newegg, and it has been working flaslessly since november.
I recenlty bought another 8gb Adata from meritline, and this one does not get recognized by the fuze.
I then read in the above posts that somebody used Total Commander to copy files, so I opened up Total Commander, and the card is shown there.
I closed the the program, and now the File Explorer can see the card as well.
Maybe you can try the above steps and see if it works.
edit: actually, I have to plug in and out a few times for the phone to see the card...
I also have this issue with my transcend 8GB class 6 microSD.
HTC Touch Pro (T-Mobile), upgraded to EnergyRom. After upgrade, able to work perfectly. After few hours (the phone of course went into sleeping mode), then the phone was not able to read the card, so starting application installed in it makes the phone hangs.
After a while, the application (10-15 mins) was able to start, then everything is normal again. Very confusing.
At the moment I am assuming it's due to the sleeping mode, somehow the phone (software??) was not able to 'resume' reading from the micro SD.
Note: Previously somehow it clashed with the keyboard mapper software (pro_fuze_keyboard.ZIP), then I uninstalled it, then it was fine. Then I install another version of keyboard mapper (Shlomki TouchPro Keyboard in Fuze ROM.cab), then it's fine again, so I now stick with this mapper. However above issue is still happening.
I read some thread about changing some registry (pnp** set to 8196), so I set it. However still the problem persists.
I haven't tried other suggestion to tweak other registry values. Here's the thread on Hermes device: http://forum.xda-developers.com/showthread.php?t=294324&page=29
I am wondering if it's really class 6 problem. Is there anybody having the same issue with 8GB class 4?
Note: my PC can read the card without any kind of problem.
I put the microSD into N95 also without any problem.
and i have the same problem to touch pro will not recognize my sdhc 4GB class 6, and i have no problems with 4GB class 4.
HI Bobby,
Were you able to get the Transcend 8gb Class 6 work on the HTC Fuze? I have the same problem. I upgraded the rom from the HTC site and I could see it. But later I plugged the card using the adapter to the laptop to copy some files and when I plug that back into the phone, it says "Not Installed". My happiness of not losing 20 buck was only for a couple of mins Any help is appriciated?
Can you give me download link for the energy rom which actually worked with the card?
yukster said:
Wierd.... I have two Adata 8GB cards, one works in the Touch Pro, the other doesn't. Both of them work in my Sharp EM One.
Click to expand...
Click to collapse
I had somewhat of a similar issue, wondering if anyone else has seen this?
8 Gig no name brand MicroSD card in my TouchPro, all of a sudden I had less than 1 gig left, using Resco I couldn't see a thing taking up all that space but it was all gone.
I put the card in the transflash adapter and looked at it on my desktop Windows Explorer and saw the following folders in \Storage Card\Program Files
one directory named (*#LD*))#KDP|} with some text after it
another directory named (#*(Y%*(#(*#*(@#kKD* with some text after it.
NEITHER directory could be renamed, moved, deleted, or anything.
Formatting the card hung the format process.
Finally, I put the microSD card back in my TP and all of a sudden Resco Explorer saw these directories and so I just deleted the Storage Card\Program Files directory (no programs in it) and formatted the card and everything was fine.
Anyone else ever seen this?
My HD2 either doesn't discover the storage card, or loses it after just a few moments.
I have tried two different cards (the 2GB supplied and my 8GB microSDHC).
Has anyone had a similar problem?
Any ideas?
Or is my phone defective.... Help!
^2 options
either storage card is defective or phone is defective...
seems like you did a cross change...
try another storage card on HD2 and try your HD2 storage card on another phone.
then you know which one causes this.
Usually 95% of the cases its the storage card thats defective
My 8Gb card works in my Xperia X1 - the card is a Sandisk Micro SD HC. Whereas the card supplied is a 2Gb Sandisk Micro SD.
Not sure what HC is.
I assume the HD2 can take a 8Gb card - but unsure about the difference in the cards.
graemenwallace said:
My 8Gb card works in my Xperia X1 - the card is a Sandisk Micro SD HC. Whereas the card supplied is a 2Gb Sandisk Micro SD.
Not sure what HC is.
I assume the HD2 can take a 8Gb card - but unsure about the difference in the cards.
Click to expand...
Click to collapse
HC = High Capacity IIRC
The HD2 can take an 8gb card.
The cards don't seem to be faulty (that is assuming that you've tested the 2gb also).
Try a reset/hard boot. I have had this issue before with other phones and that sometimes fixes
indeed SD stands for Secure Digital and HC for High Capacity...
the next generation will be SDXC (with eXtended capacity)...but thats coming 2010 or 2011..
anyway seems like your phone has an issue. Because HTC devices of the last few years are all capable of SDHC memory cards and they support either 16 or 32 GB.
I would make use of my warranty. But before try a hard reset.
Thank you all for the information.
The HD2 doesn't like that 8GB SDHC Card. When in the memory section of the phone, it recognises it, displays it used/free space, then shortly afterwards states no card is installed!
A hard reset, if no luck, I'll return it... fingers crossed.
Crap!
Hard reset didn't work! Why do I always get the duff unit!
I find it strange that it detects the card for a while then loses it...
Sending it back tomorrow for exhange....
thats the only reason I'm not such a big fan of online orders...in warranty cases everything takes a little longer.
but don't be discouraged...worse things happen in life. keep your head up
At least in the UK you are covered by Distance Selling Regulations. Hope you get it sorted soon mate!
Did you try to format your SD card?
I faced a similar situation with Diamond 2 where the SD was faulty until I did a quick format Fat32 and it worked perfectly
faced this issue in my touch hd AND x1. try formatting the card - helped me twice.
Did you install SD tune up? I also had the same problem. I uninstalled SD tune up and reset and storage card was found again. also I installed s2u2 but believe it was the former app that caused the problem.
Ah-haaaaaaaaaaa!
Formating to FAT32 has fixed the problem - thank you all for you help and suggestions.
I also must say thanks to HTC tech guru's too who experimented with various memory cards too.
Now to start a new thread on Bluetooth - Car Kit...
graemenwallace said:
My HD2 either doesn't discover the storage card, or loses it after just a few moments.
I have tried two different cards (the 2GB supplied and my 8GB microSDHC).
Has anyone had a similar problem?
Any ideas?
Click to expand...
Click to collapse
I had the same problem with my 16 Gig card. I made a backup of the card on my pc, formatted it and inserted in my HD2 and from that moment I had no problem anymore