I have just bought the HD2 today. I killed my tytn II with a concrete block.
With my Tytn II i would set up an appointment with the persons name and contact numbers as the appointment title. IF i needed to call them i could just highlight the number, copy and paste it into phone and dial.
I was able to
This system was great, i could make a call in about 30 seconds, did not have to try to remember or write down the number - i could do it at a traffic light (and on occasion while driving, but don't tell anyone)
I could also do the same thing with the address, copy it from location and paste into google maps search.
This is proving impossible on the HD2. I can't select anything in the title, location.
In the decsription selecting is tricky, you need to hold down long enough to get the [T] to appear, but a split second too long and it goes to the menu.
OK scrap a lot of that
In playing with it, while writing i discovered that in appointment view, phone numbers hyperlink.
Ok i will keep the phone. was thinking i might have to get a touch pro 2.
concreteman said:
I have just bought the HD2 today. I killed my tytn II with a concrete block.
With my Tytn II i would set up an appointment with the persons name and contact numbers as the appointment title. IF i needed to call them i could just highlight the number, copy and paste it into phone and dial.
I was able to
This system was great, i could make a call in about 30 seconds, did not have to try to remember or write down the number - i could do it at a traffic light (and on occasion while driving, but don't tell anyone)
I could also do the same thing with the address, copy it from location and paste into google maps search.
This is proving impossible on the HD2. I can't select anything in the title, location.
In the decsription selecting is tricky, you need to hold down long enough to get the [T] to appear, but a split second too long and it goes to the menu.
OK scrap a lot of that
In playing with it, while writing i discovered that in appointment view, phone numbers hyperlink.
Ok i will keep the phone. was thinking i might have to get a touch pro 2.
Click to expand...
Click to collapse
Also if the number is in the body of the appointment, a green dial button will appear when the notification message for the appointment pops up.
Related
Hey guys,
I've been plauding my MDA ever since I laid my hands on it. However, yesterday when I was on the phone, I realised I couldn't find a way of storing a number - which I assumed was quite a standard function!
For example, on a conventional phone, I simply key in the number, then select the save tab and hey presto. Or I can key in the number, and once the call finishes, the number remains on screen for me to save it.
Do you happen to have any idea/suggestion/programme suggestion that can possibly solve this dilemma? I mean, is there an alternative "phone" programme than that stored on the MDA?
Many thanks again
I've done some messing around and I think I've got it.
For those interested:
During the call, key in the new number and press the green "call" button. As I don't have Line 2, I get a message that "Operation has failed" and cancels the new dial.
This can be repeated as much as you want and when you are finished with the call, go to Call History, hold down on number and save.
However, what happens if you do have Line 2? How do you cancel the new outwards dial without cancelling the current call?
So I can call the last person (just hit phone * phone). On the default phone screen (with the keypad, speed dial, call history, etc), is it possibl e easily get to speed dial or something of the sort?
I can hit phone * right rocker (menu), then get to speed dial, but it takes a lot of taps. Why isn't the numberpad accessible with the 4-way? Argh.
tedder said:
So I can call the last person (just hit phone * phone). On the default phone screen (with the keypad, speed dial, call history, etc), is it possibl e easily get to speed dial or something of the sort?
I can hit phone * right rocker (menu), then get to speed dial, but it takes a lot of taps. Why isn't the numberpad accessible with the 4-way? Argh.
Click to expand...
Click to collapse
Option 1. Use Voice Speed Dial. Go to settings and set up your voice tags first. Then click the button on the left face at the top and speak the name. Phone dials! Only one click needed.
Option 2. Use Microsoft Voice Command. Don't have to tag first, will find anything in your contact list. Most of the time.
Option 3. Same as 1 or 2, but get a BT headset and click on its button instead of the phone button. Don't even have to touch the phone.
Option 4. Set up one-touch dialing. Go to contacts, press and hold a number, then do "Voice Dial" option. Assign to a digit 1-9. Then bring up the keypad and press and hold that same digit.
I've been complaining about this same UI gripe.
Wouldn't it be nice to hit call and go to the dial screen, and then use the up/down buttons to access the recent calls list like on a normal smartphone?
fuzzycuffs said:
I've been complaining about this same UI gripe.
Wouldn't it be nice to hit call and go to the dial screen, and then use the up/down buttons to access the recent calls list like on a normal smartphone?
Click to expand...
Click to collapse
Or like my old Nokia 6310: just browse through your contacts with the up/down button. You can do that, but you can hardly see anything from a bit further away (when the phone is in a holder on the dash in the car). It should be possible to configure a mode where you only see names and numbers in a big font when using the phone. I don't care about addresses and stuf when I'm calling. It's a wonderful machine, but the phone is only usable when standing still...
I just set up 9 speed dial numbers. I hit the phone key, than tap and hold on number 1-9 and the associated number is dialed. Only minus is that you have to remember which contact is under which number. Takes only two taps.
In contacts, you can choose menu-options and have the contacts list show only only the names instead of the numbers as well. By pressing the right of the D-pad you can choose which number must be the first in the list. Then hide the numbers and just press to call. I admit, the contacts are a bit small when you are in e.g. a car. I set up the most used number of each contact, only if I want to reach them on another number I have to go into the contact itself to select the right number.
Do I have to BUY Voice Dial Software?
I previously had the O2 XDAII that had Fonix Fone Dial included in the bundle. I've now bought the Orange SPVM1500 (Alpine) but no voice dial apps are included.
Anyone know where I can get a voice-dial application for free?
Cheers from a hopeful newbie to this site.
I, too, was finding it tedious to perform simple phone function like quick dial or dedial. After I installed MS Voice Command, this phone is 100% easier to dial. Just push the button on phone or bluetooth headset, say "call last" to redial, or "call mike smith at mobile". Works extremely well without any training needed.
You can also say stuff like:
What is my signal strength
what is my battery level
what calls have I missed
play media
open start word
etc
I am still learning all the commands, but so far it's being one of the best software for PPC.
I want to chime in to say MS Voice Command is the BEST! Push ONE button and say "Call Emily on mobile". It even works with your bluetooth headset button. It doesn't get any easier folks!
I want it for FREE.
Trouble is, I had the facility before (Fonix VoiceDial) and now I don't.
I, therefore, want some FREE voice dial software. Anyone got any ideas please?
Thanks.
Am I missing something here?
U just press the button above thered call button to go into your contacts and move to the one you want... then call...
If you want a call history on a click of a button why dont you try and replace contacts or calender with call history?
I use vijay's callhistory prog,
http://www.vijay555.com/index.php?Releases:VJPhoneShortcuts
and I have remapped the left soft key, and it's one click away
OK after much messing with BT stuff and how much hastle it is. Im looking at sticking with wired headset that comes with the XDA2i, is it possible to get the unit to open a voice dial program from pressing the green button on the headset lead?? i havent used any voice dial progs, i dont have time to be messing trying out loads of progs and resting the xda all the time. I just want to have a prog installed. Listen to my music and tomtom5, answer calls like I can currently but then with the press of the green button switch to the voice dial prog.. tell it who to call chat then press the red button to end the call and switch back to the music and tomtom5.
can it be done and if so i need idiot guide... im not a hacker/programmer, ive never used a reg edit, have not idea what an extended rom etc is.
Many thanks
Try smartskey that remap navigator buttons in phone app to contacts/call history/quick dial.
http://forum.xda-developers.com/showthread.php?t=256525
i'm trying to use the 99 speed dials... it gets easier to remember in time
Koksie said:
I just set up 9 speed dial numbers. I hit the phone key, than tap and hold on number 1-9 and the associated number is dialed. Only minus is that you have to remember which contact is under which number. Takes only two taps.
In contacts, you can choose menu-options and have the contacts list show only only the names instead of the numbers as well. By pressing the right of the D-pad you can choose which number must be the first in the list. Then hide the numbers and just press to call. I admit, the contacts are a bit small when you are in e.g. a car. I set up the most used number of each contact, only if I want to reach them on another number I have to go into the contact itself to select the right number.
Click to expand...
Click to collapse
Get smartskey. After pressing the the phone button (green call button), you can then just press up or down to get to your speed dial list or call history. This program has made my life with the Wizard a million times easier. Voice Dial and Voice Command are both good programs for touch free dialing as many others have suggested.
use smarstkey, vjphoneshortcuts. assign the left softkey to call history and the right to contacts. when you hold the down key in "contacts" for a while it starts to change the letters so you just press one of the soft keys a little of up and down and the green key
No one at T-Mobile has the answer and HTC tech support referred me here. I dial my office voice mail maybe 10-15 times a day. On my Sprint phone I was able to insert pauses in the dialing. It would dial the number, pause for the voice command, add a string of numbers, pause for the next voice command, and finally put in my password. So I could press 3, for example, and it would take me all the way through to my messages. So far I can not find a way to put in the pauses on the Wing. So I have to press 3 and then wait for the voice command, and then manually put in the next string of numbers, then wait again for the next voice command, and then put in the password. This is time consuming and impossible to do while driving. Anyone know if it can be done on the Wing? If so, how? Thanks, Tom
I have not tried it on the Wing... But try just putting a comma "," in the dialing string... Should work.... Does on all my other phones......
Commas
I tried this. Maybe I'm doing it wrong, but I don't think so. In my contacts I go to the phone number. Here is the string I use (with x's for most of the numbers): 1802xxxxxxx,,,#802xxxxxxx,,,xxxxxx
I have this as a speed dial and also as a T-Mobile Fav. Any way I try to dial it it only dials the 1802xxxxxxx and then stops.
There is no way to insert pauses
I have now been told by someone who seems to know at T-Mobile that the Wing has no way to insert pauses into a contact phone number. To me this is a near fatal flaw. It means that if I call my office voice mail 5-10 times a day I have to type 16 extra digits (which includes my phone number and my password) each time I try to get my messages. Oh well.
Tom H said:
I have now been told by someone who seems to know at T-Mobile that the Wing has no way to insert pauses into a contact phone number. To me this is a near fatal flaw. It means that if I call my office voice mail 5-10 times a day I have to type 16 extra digits (which includes my phone number and my password) each time I try to get my messages. Oh well.
Click to expand...
Click to collapse
I have 'p' as a pause digit and it works fine to call my voice mail for example...
P's don't work for me
malixsys said:
I have 'p' as a pause digit and it works fine to call my voice mail for example...
Click to expand...
Click to collapse
Tried it on the Wing but no luck. When I dial with the P's added, the dialing never gets past the first string of numbers. On the dialing screen there are no P's and nothing past the first string. This is true for comma's also. When I tried it with ***'s it did appear, these did appear on the dialing screen of the Wing when I dialed but the call clicked off without dialing with the message, "Call Ended." One thing I noticed is that Outlook takes anything after the first string of numbers and puts the rest under "Extension" and puts an x before it. But I'm having the problem even if I enter the number only on the Wing and not in Outlook.
My mistake -- p's work and also commas
malixsys said:
I have 'p' as a pause digit and it works fine to call my voice mail for example...
Click to expand...
Click to collapse
Yes! I see what I was doing wrong. A comma or a "p" both work fine. Thanks for the help.
One problem remains: I have this number as one of My Fav's, and if I dial it using My Fav, it doesn't do the pauses. I think I have to wait until July 1 and refresh the My Fav. -- I hope.
And what have you done wrong? (Just to solve this one exactly)
xsign said:
And what have you done wrong? (Just to solve this one exactly)
Click to expand...
Click to collapse
At least this: When did the speed dial (after inserting the pauses), at least a few times I did not wait long enough for the pause to kick in. On my Sprint phone I think it happened quicker with more pauses (I think), and I was used to have it happen quickly.
The Call Ended message that kept happening may possibly have been due to being out of a service area, but I tested at the time and other calls were going through, so I'm not sure what happened.
Finally, I haven't synced it back with my desktop yet. I hope the Outlook on the desktop doesn't screw things up.
One more thing if it is useful: T-Mobile has these My Fav's. If I dial using the speed dial or directly from the number itself, it is working. But if I dial directly from the My Fav's it does not insert the pause. I think the reason is that I uploaded the My Fav number to T-Mobile before I put in all the pauses, so T-Mobile must have it and be using it without the pauses. On the first of the month I intend to upload it again with the pauses and see if that will work. Hope so.
Thanks, Tom
we can also use a 'w' to insert a wait
along with the 'p' for pause, a 'w' can also be used to insert a wait. That would be useful when you are not sure how long to pause and want control of when to send the rest of the DTMF sequence. If you insert a 'w', you have to keep pressing the Green Call button and it will keep sending the DTMF sequence till the next 'w' in the number.
I use that very frequently to dial international phone numbers with different calling cards.
a w may work on the wing, most current android phones it seems like a ";" is whats required for the wait tone. also a comma is used for pause (3 seconds)but the easiest way i found to do it is by simply pressing the menu button while in the dialpad screen, it will pop up with options to add wait's or pause's
Hope to make myself clear enough.
With previous phones (Kaiser, Cruise) when I was pressing and holding a contact in "Phone Dial Mode" I had the option of choosing which number to dial (cellular, home, office .. whatever phone number was inserted in the contact)
Now with the HD (Italian TIM ROM) when I press and hold the contact it just dials the number. To change which number to dial (from a specific contact) I have to "swipe" with the finger left or right: unfortunately doing so many times accidentaly the dial goes off.
Other annoying point is that it doesn't show the number, just the "field" (cellular, office, home)
Is there a way to change it and have it like the Kaiser/Cruise?
UP,
no one who would like the issue solved?
yes please
claudioita said:
Hope to make myself clear enough.
With previous phones (Kaiser, Cruise) when I was pressing and holding a contact in "Phone Dial Mode" I had the option of choosing which number to dial (cellular, home, office .. whatever phone number was inserted in the contact)
Now with the HD (Italian TIM ROM) when I press and hold the contact it just dials the number. To change which number to dial (from a specific contact) I have to "swipe" with the finger left or right: unfortunately doing so many times accidentaly the dial goes off.
Other annoying point is that it doesn't show the number, just the "field" (cellular, office, home)
Is there a way to change it and have it like the Kaiser/Cruise?
Click to expand...
Click to collapse
Not near my phone to try it.... but I'm pretty sure that
1. sliding your thumb from "left to right" or "right to left" on a particular contact.... causes the display to cycle through that contacts email addresses & numbers.
(This only works for contacts that have more than one number... which you can see by the little arrows on the little <m>, <h>, <txt>, <w>, <e> logo, which also serves to show if its a Home or Work number.)
2. Then tapping that contact calls them on the displayed number... but only if it's a phone number thats being displayed.
I think what may be catching you out is that rather than HOLD TO DISPLAY, we now have to SLIDE..... yet another change caused by touch flow, even though the screen doesn't lookvery 3D.
(Tom) said:
Not near my phone to try it.... but I'm pretty sure that
1. sliding your thumb from "left to right" or "right to left" on a particular contact.... causes the display to cycle through that contacts email addresses & numbers.
(This only works for contacts that have more than one number... which you can see by the little arrows on the little <m>, <h>, <txt>, <w>, <e> logo, which also serves to show if its a Home or Work number.)
2. Then tapping that contact calls them on the displayed number... but only if it's a phone number thats being displayed.
I think what may be catching you out is that rather than HOLD TO DISPLAY, we now have to SLIDE..... yet another change caused by touch flow, even though the screen doesn't lookvery 3D.
Click to expand...
Click to collapse
1) Yes I know; unfortunately 9 times out of 10 it doesn't change the number to be called , rather I dial the number that is there (the number that I do NOT want to dial)
More then that it does not show the number behind (for example, sometimes I remember some numbers of the phone to be called, not if it stored under Office or Office 2
For me is a real pain. I really want the previous behaviour: TAP AND HOLD that gives you all the available number.
Any way to have it on the HD?
this is probably easy to fix or just an error on my part.
I'm using the official rom with some theme mods.
So when i go to the contact list, click on a contact and then click the "call mobile phone" entry for that contact, the option gets activated/grey background, just to get deactivated half a second later and it never actually dials the number (same with people in the favorites list)
The contacts are stored on the phone and copied over from my blackstone, so I know the numbers are all valid.
Anyone got any ideas? Any help would be appreciated
[edit]
oh and i can dial just fine when i hiz phone on the today screen, go to the menu and choose "open contact"
[edit2]
I just realized, when I'm on the contact page of a contact (where you see there phone numbers and so on), I can click Menu -> Show more information, which takes me to the "old" contact page (as it used to be in wm 6.1), where calling someone works as well.
So there are ways around this, it's just annoying having those 2 more presses just to call a number.