HTC P3300 CID SIM lock - P3300, MDA Compact III upgrading etc.

Hello,
I have a problem with a htc p3300. I have installed WM6. Now i want to si unlock the device. Whem i'm using the wizard service tool 4.2.2 it works all to the point that it checks cid, the checksum of the cid is not OK. So i'm stuck.
I have tried to fix the CID by unlock it. If i read the threads about it i have to know if it is an G3 or G4 model.
the program on:
http://forum.xda-developers.com/showthread.php?t=332320
said it is an G3 device but the service wizard to said it's an G4 device.
=> Bootloaders:
IPL: 3.07.0001 (G4 device)
SPL: 1.11 (G3 device)
SPL date unknown
How can i fix this problem?
thanks

Related

WIZA200/MDA unlock

Have anybody unlocked this phone Wiza200/mda t-mobile
version
IPL : 2.21.0001
SPL: 2.21.0001
GSM: 02.19.11
OS : 2.24.2.6
if you have, plz upload the software.
If you mean sim unlock then follow instructions here http://forum.xda-developers.com/viewtopic.php?t=50768
If you want cid unlock then with that rom you have to pay to have it unlocked here http://www.imei-check.co.uk/
what are the limitations when your wizard is not CID unlocked?
Can you not install the imate rom?

mda vario signal problem

hi every one.... i'm using a mda vario from uk.... recently i had problem with my mda vario where the phone signal were very weak and unstable..... my phone signal always shows "searching......" and sometimes drop call when i make a call or answering call......
and i had try to flash the radio rom from 2.19.11 to 2.61.11, 2.69.11....... but still the same problem i face.....
is it possible the problem cause by the cid??
or any suggestion for me how to solve this problem??
ipl : 2.21.0001
spl : 2.21.0001
radio : 2.19.11
os : 10.1.0.811 wwe
protocol : 4.1.13.09
extrom : faria v5.0
use wizard service tool WST ..search forums for it..check if its CID locked..if it is locked unlock it using WST.
then flash it with T-mobile ROM ruu_2.26 IPL/SPL/GSM radio
then down grade GSM radio to 2.19 UK
now u get IPL/SPL 2.26 and Radio 2.19UK
now install faria ROM
once u r done u will have a working system with no hangups or signal issues.
Fail to unlock CID
Thanks guys, i try to unlock the CID using wizard service tool....
But the tool show that the DOC write protected........
jimscby said:
Thanks guys, i try to unlock the CID using wizard service tool....
But the tool show that the DOC write protected........
Click to expand...
Click to collapse
ipl : 2.21.0001
spl : 2.21.0001
radio : 2.19.11
os : 10.1.0.811 wwe
protocol : 4.1.13.09
extrom : faria v5.0
You cannot CID unlock your phone through WST tools. As it's a G4 DOC chip device with IPL/SPL 2.21.0001.Infact it cannot be CID unlocked at all.I'll advise you to never try to unlock your phone.But from looks of your post it's already flashed with a custom build Rom 'Faria v5.0 version',it's a wm5 version Rom.Perhaps it's already got 'HardSPL' or flashed through 'SoftSPL' method,If it's already 'HardSPL' then just download any latest wm6 custom build Rom (G4 Safe Rom) and flash,but first be sure it's got HardSPL.
However if you are interested to upgrade your phone to the latest wm6 custom build Roms,there's a procedure called "SoftSPL" & "HardSPL" to upgrade a G4 device.Read the stickies on G4 subforum to understand and do the procedure correctly.
Good luck
I bricked my pda!!!!
Guys, yesterday i try to flash the ipl/spl 2.26 to my g4 mda vario..... What had i do are:
1) i extract the ipl and spl from t-mobile 2.26 rom and pack using the nknbf tool.
2) with using the softspl tool i flash the ipl/spl 2.26 to my device and it was done....
3) after the device soft reset, it start to tri color screen and show ipl 2.26 and spl 2.21 olipro.
4) before i trying to flash the os and radio rom to my device, accidently i had remove the battery......... the nightmare start, my device not function anymore.........
dear all, could any one can teach me how i can save my device......?
how to heard from all of you soon.
When you extracted the IPL/SPL from the t-mobile ROM, and repacked them to flash to your phone, did you use the files labeled 90000000-IPL_1 and 91000000-SPL_1 or did you use the ones labeled 90000000-IPL_2 and 91000000-SPL_2? If you used the _1 versions you flashed the IPL/SPL for a G3 and may very well not be recoverable. The only thing I can suggest you try is to reflashing the entire ROM so that it attempts to flash the right version of the IPL/SPL or since you did it once already, extract and repack the _2 versions and flash them. If that doesn't work, you may have a nice shiny brick on your hands.
Voilla!!!
Sry to say but I very categorically tried to explain to you that you got a G4 device.you gotta be very careful with it while flashing.
Anyway ! try to get the phone into Bootloader mode (multicolor screen) by pushing and holding down the 'Camera' button and push the 'Power On' button,while keep holding down the camera button till the screen wakes up and goes into bootloader mode.if it gets into a bootloader mode,than do the procedure xeno1 has already explained in his above post.Hope it recovers.....
Try already.....
Guys, i hv try all the step above but..... still cant get into the bootloader.
i think i need to send my devices to repair...
anyway, thanks alot guys.

Help Unlocking MDA Vario

Hi,
I need some help please.
I have a MDA Vario on T-Mobile. I think that it is locked
ipl & spl 2.21.0001
Gsm 02.19.11
OS 2.21.2.6
I have tried to unlock with lokiwiz 2 and it fails. I have also tried with lokiwiz3 and i do get unlock code but i still get the sim not recognised error wehn i put in a 3 sim. Do i need to do a rom downgrade? if so how?
Thanks
You have G4 hardware, and yes, it is still locked. What you need to do is run HardSPL in order to flash it.
Here's the thread on HardSPL:
http://forum.xda-developers.com/showthread.php?t=332320
how do you unlock the G3 hardware?
i tried the program and it says i have a G3
JustTouch said:
how do you unlock the G3 hardware?
i tried the program and it says i have a G3
Click to expand...
Click to collapse
Try the search feature on the site, it works great:
http://forum.xda-developers.com/showthread.php?t=305225&highlight=unlock+G3
Hi,
Tried Hard Spl and it did not work, any other suggestions appreciated!
Reading CID block...
Calculating CID block sum...
CID checksum: D08FF4CD
Decrypted stored sum: EFA6627916B9ECB9
Decrypted calcd sum: EFA6627916B9ECB9
Key index : 24 - Block index: 237
CIDkey: ¯¬C6èYœ
CID IMEI: 356381*********69
SIM lock status: 0100000000000000 LOCKED
Lock #1 in use.
Detecting SPL version...
SPL version: 2.21.0001
DOC chip is write-protected!
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.21
Registry AKU: .2.0.0
Radio: 02.19.11
Protocol: 4.1.13.09

help upgrade radio

GUYS I BOUGHT HTC P3300 3 MONTHS BACK ITS SPECS ARE
MY IPL AND SPL IS AS SHOWN
IPL: 3.07.0001 (G4 device)
SPL: 3.07 (G3 device)
SPL date unknown
CAN ANY ONE TELL THAT CAN USE THIS METHOD CID UNLOCK MY DEVICE IS IT SAFE TO DO ON MY PHONE
I WANT TO UPDATE MY RADIO
PLEASE PLEASE ANY ONE HELP
done it
i don it sucessfully guys just prayed god before doing it
Step 1 : http://forum.xda-developers.com/showthread.php?t=311403
Step 2 : http://forum.xda-developers.com/showthread.php?t=397939

Charmer t-mobile compact II (PM200) unlock CID и SIMlock?

Charmer t-mobile compact II (PM200) unlock CID & SIMlock?
IPL 3.08
SPL 3.08
gsm 02.69.21
os 10.2.0.8
Read the WIKI. http://wiki.xda-developers.com/index.php?pagename=HTC_Charmer
They tell you all there.
But I'm nice and I'll tell you what is written there.
To SIM Unlock you can use Lokiwiz03.
You can't CID unlock a device with a bootloader over 1.x but that isn't needed with the way we flash our ROMs.
htc pm200 (t mobile )
sir ,
i have pm 200 it's freeze on t mobile
then i update it with IPL:-3.08 VER BUT MY OLD VER IS 1.12
HANDSET WORKING BUT NOT SHOW BATTERY METER & SOME TIME WORKING SLOW PLS HELP ME ................
There is no need to pay for any unlock. We have the SIM unlock here and CID unlock isn't needed.

Categories

Resources