Related
My review of the screen protector from Nushield.
(Purchased 2 anti glare, 1 clear model screen protector [comes in a package of 3 only]~ 12 USD)
Install:
-Installation is pretty straightforward but requires some experimenting to get the film in.(Doesn't use a sticky film, but rather a slide in)
-Warning, Make sure that there is no dust under the screen! It is a pain to take out. Trust me i know, i accidently wasted a film by bending it to take it out.
-When you first get the product, u might think that the screen protector they sent you wasn't yours since it looked to big to be fitted in. But actually it fits perfectly once u manage to slide all sides in.
Sensitivity loss:
-On a scale of 10(10 meaning no sensitivity, and 0 meaning no screen protector) it receives a 1.
-However, I did find a HUGE improvement in the touchflo scrolling than without the screen protector.(If you own a kaiser, you should know of the smears and awkwardness of sliding ur thumb to scroll.)
Overall feel and look:
-I actually dont notice it, and it is fingerprint proof.
-Using touchflo feature, the thumb easily slides across with no smears, in other words i dont get that suction feeling.
-And dont forget this is a slide in, so you dont get those bubbles you get from using the provided screen protector you got with the kaiser. The screen protectors surface is really smooth, its like sliding a thumb across a sheet of printing paper)
PS: I have not tried the clear film yet, and dont think i have to. The antiglare film seems to be secure and feels as if it can last years...
My rating for the nushield screen protector is a 9/10.(would be 10/10 if it was easier to install, but then it wouldn't work as good )
As for purchase instructions, go to www.nushield.com and choose the HTC TYTN as for screen specs since it is the same as the kaiser. (I was foolish to try to custom make the screen protector for the kaiser only to realize that its the same size as the tytn!!*got email telling me that *) You can mix and match as i did by putting which films you would want under the comments on checkout.
Thanks for that, i was looking for a good screen protector but i didnt want those sticky ones. This is perfect and from your review, it seems to do a great job too!
Thanks, i just ordered one, but as you said, there was no 'kaiser' ones so i just ordered it for the tytn
I'll always be a fan of PocketPCTechs.com's WriteShields. And during October, you can get 20% off if you use this coupon code: PPCTRC1007
Type it into the Special Instructions field.
Just as an FYI to anyone else considering ordering the NuShield: I decided to try some based on this review, and also decided to get two anti-glare and one clear. I got the following response:
While we are always trying to be accommodating to our customers
special requests, this one has gotten out of hand. Someone must have
posted on a discussion board that we will do this. This request is
now occurring several times daily and represents a significant amount
of time and effort to put these special packages together.
Click to expand...
Click to collapse
Guess they don't like doing that very much.
EDIT: and fwiw, they appear to currently be out of anti-glare anyway, so I ended up ordering clear.
Martin Field's OverlayPlus
Best. Screen protector. Ever. Period.
It's non sticky, invisible, and best of all: If you mess up (e.g. bubbles, dust) while putting it on, you can just rinse it off with water, let it dry for a few minutes (or blow dry), and voila: It's clean and sticks again.
I've been using these things on my mobile phones, PDA's, Nintendo DS, etc, for as long as I can remember. Even after 5 years, you can simply take the screen protector off and your screen will look brand new.
Already have a small scratch? Put the screen protector on and it's gone
ekw said:
As for purchase instructions, go to www.nushield.com and choose the HTC TYTN as for screen specs since it is the same as the kaiser. (I was foolish to try to custom make the screen protector for the kaiser only to realize that its the same size as the tytn!!*got email telling me that *) You can mix and match as i did by putting which films you would want under the comments on checkout.
Click to expand...
Click to collapse
I thought the 8525 is the same as the TyTN, and the screen protectors for it won't quite fit the Tilt.
But you can confirm these will fit the Tilt?
GWelker62 said:
I thought the 8525 is the same as the TyTN, and the screen protectors for it won't quite fit the Tilt.
But you can confirm these will fit the Tilt?
Click to expand...
Click to collapse
Unless it's an unusually small screen protector for the TyTn/8525, you are correct that it will be too large for the Tilt. I had to trim about a millimeter off of each dimension of my Boxwave ClearTouch Anti-Glare for it to fit.
I really like the Boxwave protectors. I had one protector last for over two years on my Treo 650, and similar to another protector described, if you want to clean it just use hand soap and water and stick it right back on.
In fact, I found that if the protector is slightly wet, it is much easier to get the bubbles out. It took almost no effort after I trimmed it when I put it onto my Tilt's screen.
So do any of these make the screen easier to see in direct sunlight?
I just ordered 2 BRANDO superclear ones ... have had a lot of phones and have had a lot of screen protectors but i have to say brando is DEFINATELY the best.
Noiz said:
So do any of these make the screen easier to see in direct sunlight?
Click to expand...
Click to collapse
I've never came across any that would. The only thing that helps is the... ummm, shade.
GWelker62 said:
I thought the 8525 is the same as the TyTN, and the screen protectors for it won't quite fit the Tilt.
But you can confirm these will fit the Tilt?
Click to expand...
Click to collapse
I confirmed it in my review. BTW Dont be stupid and trim it, it fits perfectly, trimming it would cause it to be loose once its in which will become an annoyance.
I just received the overlay plus screen protector for the tytn, and it does not fit the kaiser screen. The tytn overlay is larger than the kaiser's screen. I hope martin fields accepts exchanges.
d12ag0n49 said:
I just received the overlay plus screen protector for the tytn, and it does not fit the kaiser screen. The tytn overlay is larger than the kaiser's screen. I hope martin fields accepts exchanges.
Click to expand...
Click to collapse
keep trying to fit it in, if you read the original review he says that it's very hard to get it in there, but once it's in...it's gonna do good.
I was able to fit it in but its not on perfectly because the overlay uses a silicone adhesive, which makes it somewhat difficult to maneuver unlike the nushield screeprotectors which you just slip in.
d12ag0n49 said:
I was able to fit it in but its not on perfectly because the overlay uses a silicone adhesive, which makes it somewhat difficult to maneuver unlike the nushield screeprotectors which you just slip in.
Click to expand...
Click to collapse
wait....i think this is a case of miscommunication, I thought that you couldnt insert the NuShield protectors in, so I said to keep trying because the original poster said that it took him a little bit, but now it seems like you are talking about another kind of protector.
Conclusion: I'm confused
a lot of 99 cents only stores have 10 for 1 screen protectors that are larger than the kaiser. i bought like 5 of these (50 count) and just cut them to the size of the manufacturer's protector. it takes about a minute and avoids the highway robbery of screen protector prices.
ghaith_d said:
wait....i think this is a case of miscommunication, I thought that you couldnt insert the NuShield protectors in, so I said to keep trying because the original poster said that it took him a little bit, but now it seems like you are talking about another kind of protector.
Conclusion: I'm confused
Click to expand...
Click to collapse
Sorry for the confusion. I purchased the Martin Fields Overlay Plus screen protector and not the Nushield one that the OP reviewed.
d12ag0n49 said:
Sorry for the confusion. I purchased the Martin Fields Overlay Plus screen protector and not the Nushield one that the OP reviewed.
Click to expand...
Click to collapse
aaaah, makes sense. I already have my 6gb micro sdhc and my nushield protectors...im just waiting for my kaiser
Nushield now has a drop down menu for Tilt in ATT and TyTn II in HTC sections. I will order them since it seems like a pretty good value.
i ordered a shield from shieldzone.com
i have used them on my blackjack and digital camera, but never a PPC device so I will have to see how well it works..
Got this today and it's significantly shorter than the screen (3/16"). Any other owners - is this normal? Expected it to be a flush fit.
Anyone? I know people have them - they were recommended on here repeatedly. Thanks in advance.
Havn't got mine yet. Their US site was backordered so I ordered from across seas. It should be here some time this week though.
I recently got boxwave protector.
Quite good and smooth under the stylus.
funny, i've had a few and they alway fit perfectly. perhaps take a picture of the fit and email them, and post the pic and their response here for reference.
well, i've had a few on the 3.5" devices, none for the 2.8" so its been a few years since i've had one i guess
This is funny because I thought the same thing and was really really angry. But it actually fits perfectly. I think you made the same mistake I did by sliding it too far up (going underneath the front housing) causing it to be too short and not fit right. If you line up the screen protector perfectly with the screen it should fit perfectly. Look at the piece you peeled it off from and compare it to the size of the screen and you will see what I mean.
I ordered another one because it wasn't too good after i took it off the first one. Hope this helps.
Expert Shield screen protectors are just as good and are half the price.
http://cgi.ebay.com/ws/eBayISAPI.dl...Sell_LogicX&refwidgettype=cross_promot_widget
kpaznb0i said:
This is funny because I thought the same thing and was really really angry. But it actually fits perfectly. I think you made the same mistake I did by sliding it too far up (going underneath the front housing) causing it to be too short and not fit right. If you line up the screen protector perfectly with the screen it should fit perfectly. Look at the piece you peeled it off from and compare it to the size of the screen and you will see what I mean.
I ordered another one because it wasn't too good after i took it off the first one. Hope this helps.
Click to expand...
Click to collapse
kp's got it right. i think OP slid the protector under the top frame of the screen. i made this mistake the first time i put in this screen protector too after positioning it correctly, it fits perfectly.
great screen protector btw. WAY better than the OEM one.
I have gone through many different screen protectors over the years, and I have one thing to say about all of them - none of them hold a candle to Martin Fields.
Every one I have bought on eBay have made my screen look grainy, for lack of a better word. It's like looking through a screen door. Only MF protectors look, and act, like the actual screen. It's like they are completely invisible. It is most noticable when you turn your phone on in the dark.
Yes, $25 for two of them is kinda spendy, but WELL worth the money. They are easy to apply and reusable. Wash them under the faucet, let dry, and reuse it. All the other ones are one use only (despite their claims).
I just received my screen protector from NuShield and I have to say I am extremely impressed with them. It comes in a pack of 3 for $11.99 and they are not adhesive. They fit perfectly, you dont have to worry about air bubbles, and the clarity is very good. You can get clear of anti-glare. I got the clear ones and once they are on you cant really tell they are there. The only thing negative I have to say about it is that it is a little tricky to install, but once I figured out the proper way to do install the protector it was easy. I would definitely recommend this as an alternative to adhesive screens.
Has anyone used one of these protectors in combination with one of the cubes floating around?
any issues (eg loss of sensitivity/harder to get touchflo to respond etc..)??
I completely agree with Lidberg. The Martin Fields is the best screen protector I've used to date. I had a couple pieces of lint/hair get on it during installation. I peeled it back up, took a piece of tape, pulled the lint/hair off the protector and placed it back down with no issue or bubbles. It has no effect on the touch screen either. Great product!
Well I ordered my Martin Fields on January 7 and it's still not here... blah. I'll give my 2 cents soon... hopefully...
So I've tested a few screen protectors:
The Invisishield
Martin Fields
Expert Shield
Invisishield IMO is VERY clear very easy to apply, NO BUBBLES!!! it's just very VERY grippy and is a PITA to use with your fingers.
Martin Fields and Expert Shield all in all are basically the same IMO same clarity, they have about the same degree of difficulty to put on (which isn't hard but harder than the Invisishield) and they are cut perfectly
The Expert Shield costs less, but is much harder to find, it took me a LONG time to find the expert shield for the kaiser =/
I also compared the Martian Fields and Expert Shield on my SE W810i with same results as the one for the Kaiser
IMO Martin Fields of the Expert Shield you can't go wrong with either
Well finally got my Martin Fields today and let me just say if there was ever a more difficult screen protector to put on, the manufacturer should be in court.
With that said it fits and feels great, and looks pretty darn good. I can tell it's there (just because I stared at it) but it looks pretty nice.
Daemos said:
The Expert Shield costs less, but is much harder to find, it took me a LONG time to find the expert shield for the kaiser =/
I also compared the Martian Fields and Expert Shield on my SE W810i with same results as the one for the Kaiser
IMO Martin Fields of the Expert Shield you can't go wrong with either
Click to expand...
Click to collapse
I agree. Good review.
-haze- said:
Expert Shield screen protectors are just as good and are half the price.
http://cgi.ebay.com/ws/eBayISAPI.dl...Sell_LogicX&refwidgettype=cross_promot_widget
Click to expand...
Click to collapse
Ran a search but for some reason it doesn't seem anyone has ever tried these...
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
Wanted to get some feedback by members on this forum before purchasing. What do you guys think? Will "static attachment" mess up the screen in any way?
screen protector
you dont have a screen protector on your phone?? it shouldve came with your phone unless you got it else where. better get these
well i screwed up the one that came wit it by trying to get it perfectly on the screen, so after ripping it out over and over again i kept gettin dust on it, so i threw it away and for now i put that original one back that has the pictures on it and shows you how to tilt ur phone? u know the one that comes on it when its brand new wit "warnings" and stuff...
either way...i am about to purchase either the "Expert Shield" or the pocket solution ones and i am tryin to get some feedback on the pocket solution ones first before purchasing. as for now, i have my phone on "baby mode" and am leaving it at home
geez...no one?
Expert Shield all the way. Don't even second guess it.
Expert Shield rocks. I have used them for my Tilt and a couple of cameras. You just have be careful putting them on. It is really easy to get dust under it if your not careful. Look on eBay and you can find them for really cheap shipped from either Hong Kong or Canada. Usually around $10 - $12 shipped. They are more expensive here.
Martin Field screen protector is THE best screen protector for the kaiser.
captainsensible2002 said:
Martin Field screen protector is THE best screen protector for the kaiser.
Click to expand...
Click to collapse
+5 to that. i'm using them now on my tilt.
they're thick, yet flexible, have yet to show any wear from the stylus, & they haven't appeared to affect the touch sensitivity either.
It's been said by someone here that the Expert Shield protectors are just as good as the Martin Fields. He ruined one of his Martin Fields and I told him to try out ES and he said it was great.
They're a lot cheaper also.
ScreenPatronus
I recommend Screen Patronus
cushcalc said:
I recommend Screen Patronus
Click to expand...
Click to collapse
+5 to that. I've used InvisibleSHIELD but removed it and used ScreenPatronus instead.
PSP Screen protector
I'm using a Hiro PSP Screen protector (cut into size) covers 99.9% of the screen almost same thickness as with martin fields, but at a fraction of the price
It also doesn't affect screen sensitivity.
-haze- said:
Expert Shield all the way. Don't even second guess it.
Click to expand...
Click to collapse
I second this, i got my a couple days ago. I love it, its more of a hard plastic type protector, alot better than those expensive sticky films you can buy.
pinkfloyd01 said:
Expert Shield rocks. I have used them for my Tilt and a couple of cameras. You just have be careful putting them on. It is really easy to get dust under it if your not careful. Look on eBay and you can find them for really cheap shipped from either Hong Kong or Canada. Usually around $10 - $12 shipped. They are more expensive here.
Click to expand...
Click to collapse
I bought an Expert Shield and am VERY happpy with it. You're dead on about the dust thing and I'll add fingerprints to that list.
I did discover is that you can remove it and wash the sticky side off with warm water and a clean finger. Then pat dry lightly with lint free cloth for eye glasses. It will it go right back on just like new!!!! I did this three times in a row for fingerprints and dust that was bugging me.
Great product!!!
i would strongly recommend http://www.zagg.com/ Invisible sheild
monster2223 said:
Ran a search but for some reason it doesn't seem anyone has ever tried these...
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
Wanted to get some feedback by members on this forum before purchasing. What do you guys think? Will "static attachment" mess up the screen in any way?
Click to expand...
Click to collapse
I'm using them, and they are ok for the money. There are better ones out there like the others are stating. But for 5 bucks, not a bad buy at all.
Also try Boxwave's ClearTouch, It's a bit pricey but man... after 2 month with this thing stick on my screen, it didn't even get a single scratch on it, hard as a rock! Also perfect fit. It's also washable and after wash it with soap and put it back on to your screen it looks like brand new... Well worth the money.
Link here.
Someone here linked them before I bought them and they are garbage. They are a pain in the ass to put on the first one I put on didnt cover enough of the screen and anything off of your fingers stays on there and its very hard to clean you have to use water. Mircofiber cloth wasnt good enough. Within two weeks it bubbled up and I had to trash the 1st one. The 2nd one that came in the pack was too big and it was also did not fit well. Oh yea
I dont recommend them.
Lifetime Shield
Invisible Shield. Thats the one.
Lifetime shield
The invisible shield does have a different feel to it, but its nothing thats a show stopper. The company is good for its work, they have already replaced one due to the lack of a camera opening for my tytn 2.
hello, does anyone have installed pictures of these films on their phone, i would like to see exactly how much coverage they offer, i have searched everywhere but cant find any
BlackAccord said:
hello, does anyone have installed pictures of these films on their phone, i would like to see exactly how much coverage they offer, i have searched everywhere but cant find any
Click to expand...
Click to collapse
I just got my ghost armor in the mail today, it is actually front, back, and then smaller side and top, bottom pieces. I'll see about posting some pics when I install it. Not going to do it tonight, am very tired and don't want to screw it up.
Someone in the Invisible Shield post promised to post pics, but never did. I too was really curious how it looks, since I have never seen one in person.
bilbobrian said:
I just got my ghost armor in the mail today, it is actually front, back, and then smaller side and top, bottom pieces. I'll see about posting some pics when I install it. Not going to do it tonight, am very tired and don't want to screw it up.
Click to expand...
Click to collapse
I would highly appreciate that
Pictures for Invisible Shield (Full Body) on Fuze
Hi all,
Here is my Fuze that i covered with Full Body Invisible Shield. I like it, made it feel rugged and i can really put it at any surface now without worrying about scratching the sides. The four points or should i say eight points of the phone corners are not that protected. The IS has been covering my phone for almost 1 month.
I also increased the brightness and contrast of the pictures when i uploaded it so you guys could see the IS better.
I bought this so called "free lint cloth" from WalMart, but lo and behold, it's not actually lint free, it HAS lots of lint when i used it. So on the back of my Fuze, you will see a few white dots, those are the lints from the cloth. Well, lesson learn, gotta make sure it's lint free cloth
Hope the pictures help. But overall, i really like my IS.
thx for the pics - i wish someone would jsut release a decent non-glossy backcover replacement already for the fuze - i dont want to deal with protecting the back faceted stuff at all.
Do you find the screen protecter to reduce the screen sensitivity/scroll speed at all? The stock screen protector ive found to do this a little bit with my stylus input.
paperdimension said:
Hi all,
Here is my Fuze that i covered with Full Body Invisible Shield. I like it, made it feel rugged and i can really put it at any surface now without worrying about scratching the sides. The four points or should i say eight points of the phone corners are not that protected. The IS has been covering my phone for almost 1 month.
I also increased the brightness and contrast of the pictures when i uploaded it so you guys could see the IS better.
I bought this so called "free lint cloth" from WalMart, but lo and behold, it's not actually lint free, it HAS lots of lint when i used it. So on the back of my Fuze, you will see a few white dots, those are the lints from the cloth. Well, lesson learn, gotta make sure it's lint free cloth
Hope the pictures help. But overall, i really like my IS.
Click to expand...
Click to collapse
Thanks for the pics
Looks good. I will very likely order one as soon as I get the Fuze. Your pics definitely helped me make my decision. It's hard to believe Invisible Shield doesn't have pics like that on their site, so customers can get a real look at what it looks like installed.
Thanks again!
Screen Sensitivity
bpm2000 said:
thx for the pics - i wish someone would jsut release a decent non-glossy backcover replacement already for the fuze - i dont want to deal with protecting the back faceted stuff at all.
Do you find the screen protecter to reduce the screen sensitivity/scroll speed at all? The stock screen protector ive found to do this a little bit with my stylus input.
Click to expand...
Click to collapse
It felt kinda weird after i first applied it, for the first week i would say, the IS feels alien sort of to the Fuze, but after that i let it cured under a desk lamp every night. During this time, i almost think about removing it and not using it, but i let it go and just wait after a few days and voila, it's really becoming the skin of my Fuze.
The screen becomes a little bit sticky with the stylus, i do have to get used to it, but after the first week, everything is good.
Eh. invisibleSHIELD doesn't do it for me. I'm ordering bodyguardz. It looks to unprecise.
paperdimension said:
Hi all,
Here is my Fuze that i covered with Full Body Invisible Shield. I like it, made it feel rugged and i can really put it at any surface now without worrying about scratching the sides. The four points or should i say eight points of the phone corners are not that protected. The IS has been covering my phone for almost 1 month.
I also increased the brightness and contrast of the pictures when i uploaded it so you guys could see the IS better.
I bought this so called "free lint cloth" from WalMart, but lo and behold, it's not actually lint free, it HAS lots of lint when i used it. So on the back of my Fuze, you will see a few white dots, those are the lints from the cloth. Well, lesson learn, gotta make sure it's lint free cloth
Hope the pictures help. But overall, i really like my IS.
Click to expand...
Click to collapse
Thank you so much for posting those pictures, it does worry me a bit that the corners are exposed, you would think that the corners would be the first to hit the ground when dropped but the good thing is that IS doesnt add bulk and allows the fuze to keep its good looks , leaning towords IS but have to do just a lil bit more research
Kraize said:
Eh. invisibleSHIELD doesn't do it for me. I'm ordering bodyguardz. It looks to unprecise.
Click to expand...
Click to collapse
would you consider bodyguardz has the most accurate precission compared to IS, ghost armor, and whatever else? I'm still trying to find a skin that is _specifically_ made for fuze and covering the corners as well.
i am thinking of getting bodyguardz.. been using them ever since
dont like Invisbile shield anymore but the back is good. front sucks
ghost armor never heard of them... might try it.
martinoverlay don't have it for fuze ):
best skinever = don't have it for fuze ):
blah hopefully i can find a discount to get a good deal :d
Insible Shield in Malls
I'm in the LA area and Invisible Shield has kiosk in some of the malls. You can se/touch/feel, etc.. it first hand. I looked at it and am going to have them (they cover the phone in about 45 minutes) my FUZE.
@cyberblue
So far, none of them covered the corners >.> none that I could find. This is because it would peel at corners and come off because they are round and not dead flat straight like the diamond is. There might be later. I ordered Bodyguardz after looking at the pictures and seeing that it looks much tougher and protects MUCH more area. and the invisible shield looks like crap. It is not fit for the fuze. Looking at the pics posted by someone on this forum, You'll notice that the screen protector and the front panel covers are not curved for the fuze. They're just straight.
***EDIT***
I'm curious. Since invisibleSHIELD usually has the correct dimensions and to the looks of this picture, it seems that the OP bought a touch pro body cover instead of a fuze body cover. I think that is a camera hole by the AT$T logo. But I'm not sure. I'll pm the poster of these pictures.
Pic:
Yea,
I did buy the Touch Pro GSM version of IS. Indeed, there is a hole in my AT&T logo, the IS had hole in it, i should have just put the small IS holeto cover it , but my mistake, i threw it out and i forgot about it.
paperdimension said:
Yea,
I did buy the Touch Pro GSM version of IS. Indeed, there is a hole in my AT&T logo, the IS had hole in it, i should have just put the small IS holeto cover it , but my mistake, i threw it out and i forgot about it.
Click to expand...
Click to collapse
Ah. That is why the dimensions of the invisibleSHIELD are a little off.
mstevem said:
I'm in the LA area and Invisible Shield has kiosk in some of the malls. You can se/touch/feel, etc.. it first hand. I looked at it and am going to have them (they cover the phone in about 45 minutes) my FUZE.
Click to expand...
Click to collapse
Hey I live in LA!!! Would you mind telling me which malls have the kiosk? I'd love to check them out.
edit: do they also put it on for you?
villa_bryan said:
Hey I live in LA!!! Would you mind telling me which malls have the kiosk? I'd love to check them out.
Click to expand...
Click to collapse
Doesn't some of the Orange County malls carry em too?
I'm sure it's just a kiosk vending machine time. I don't think it puts it on for you. lol
D3TH METAL said:
I'm sure it's just a kiosk vending machine time. I don't think it puts it on for you. lol
Click to expand...
Click to collapse
I wish, I tried putting on a InvisibleSHIELD last week and that was a disaster.
I'd like to know if somebody uses/used Best Skin Ever on US T-Mobile HD2 ?
Any reviews ? Pros and Cons ?
Anybody used BSE (full body) on different devices ?
Particularly interested in long term peeling off problem. Like after 1-2-3 months corners start peeling off and device looks ugly after that.
I'm thinking about buying one. Had bad experience with HTC HD + InvisibleShield mainly because of peeling off problem.
Personally for me I just went with a gel skin and thats it. The screen is scratch resistant so there is no real need for a screen protector. My friend used an invisisheild and had screen response issues.
I had origionally gone with BSE for my G1 because of the price...needless to say, it started peeling up after only about a week and the "orange peel" effect was horrible. (Thats what I get for trying to save a buck)
I have since switched all of my devices to phantomskinz...you get 2 complete kits and free shipping. I have never had any issues whatsoever with them.
Even my 1st gen iPhone purchased on launch day still has the first skin that I put on with no signs of letting go.
...if you look around on coupon sites like www.retailmenot.com, you can often find some deals to get an extra couple bucks off as well.
And yes...I do have a phantomskinz full protection kit on my TmoUS HD2...the screen prtector works great against smudges and does not affect the touch sensitivity or the "swipability" of the screen.
agentaaron said:
And yes...I do have a phantomskinz full protection kit on my TmoUS HD2...the screen prtector works great against smudges and does not affect the touch sensitivity or the "swipability" of the screen.
Click to expand...
Click to collapse
On you TMO HD2 did you use phantomskinz for international HD2? Because Im not able to find TMO HD2 specific skin there.
bogdatov said:
On you TMO HD2 did you use phantomskinz for international HD2? Because Im not able to find TMO HD2 specific skin there.
Click to expand...
Click to collapse
This is the one I have...could not fit more perfectly
http://phantomskinz.com/htchd2.aspx
agentaaron said:
This is the one I have...could not fit more perfectly
http://phantomskinz.com/htchd2.aspx
Click to expand...
Click to collapse
But this is for HD2, not TMO version, right ? What about that 1.5 mm height difference between them ?
bogdatov said:
But this is for HD2, not TMO version, right ? What about that 1.5 mm height difference between them ?
Click to expand...
Click to collapse
It is listed under the Tmobile section and fits perfectly...It was not added to their catalog until about a week after the launch of the phone, so I am quite certain that it was made specifically for our device.
All of the flaps, folds, and holes line up exactly.
Is it better than Zagg's InvisibleShield?
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Hagi37 said:
Is it better than Zagg's InvisibleShield?
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Click to expand...
Click to collapse
lol...we have a zagg kiosk in one of our local malls...I stopped there for the heck of it while my wife was in a shoe store and some guy who was paying to have his HD2 wrapped felt mine and said it felt much better than his. He was asking the guy behind the counter if he had to pay if he was not satisfied. The girl that was working there asked me to step away if I did not need their services.
I use clear coat on my HD2. It covers most of the device, and I have had no problems with it. Just have to make sure to install it properly.
Who makes the best skin???
Who makes the best skin?
Skinomi?
ZAGG?
BodyGuardz?
PhantomSkinz?
I use "Clear Protector" and have for 5-6 years without any issues...Tj
www.clearprotector.com"
My 2 cents
I've used the anti-glare screen protectors from boxwave and never had a problem. I have not used any of the full body protectors... I like the silicon gel covers and install a screen protector because I tend to bang my HD2 into things when I have it in my hand and I also carry it in my pocket. I like the exta cushion of protection that gel cases provide. The HD2 is just too d**n big...
I have BSE on my 2 year old's ipod touch and has been on there since I bought it a year ago and it hasn't peeled or scratched. It looks perfect and feels perfect. I also have it on my HD2 and same feeling about it. I like a lot. I put it in and out of my jean pockets or purse without a case and no peeling. It has been on there since I got the phone on March 24th.