No matter what i do, i can´t get the Navi Panel automatically start when i connect it with my car charger..
Settings are set to " Open Panel if device is in Car Mode " and yes, i got the original Charger CC C200.
Any suggestions / solutions?
I´m getting annoyed more and more by things like this which should work out of the box!
i think it's suppose to work with the car kit not the car charger......
Related
Hi There,
I got a new Car kit (double din with navigation and all).
My snap does not connect to the unit via bluetooth, the head set icon does appear now and then, but on the car kit is just displayes connecting... the whole. However if I dial a number out from my snap, the call does go through the car kit, but wont accept incoming calls. I dont receive error message anywhere.
The reason I think it must be the snap is that I tested the car kit unit with a blackberry and nokia (2 diffrent nokias) and it works like a charm.
I went through the settings a million times and the few options i have i have toggled... SIM accessablitt, pass key, visibility. I tried adding the unit via snap and also allowed the unit to discover the phone, all comes to the same result.
I also tried googling the problem but can't find anything.
Any help or suggestion will be much much appreciated.
Thank you
Hey,
Perhaps not exactly in the right topic but I wanted to ask how you use car kits with android on hd2. Is there option that when I put phone into car kit it would recognize it and run car home automaticly? Is there option to put my Igo into car home panel? And the phone seems to go idling with blackscreen even if its charging on the car kit, how to change that? Using Mdeejay 2.6 and original hd2 car kit.
Thank you in advance if you point me to the right direction
+ 1
the route 66 navigation program that comes with desire z build is frankly crap. is there anyway to change the shortcut on the car panel to run another program such as CoPilot?
Cheers
Hi everyone, my first thread here and absolutely new for android world! Was able to configure everything and like it much, just tryed everything without luck about this camera setting so hope you can help me
I bought an android head unit from ebay, all i can say from it is that it has a 10.1” display, works over android 6.0.1 and connects to the vehicle (chrysler) throw a canbus decoder. I think the system is not rooted, but it does something weird, when i try to read and write files throw the diferent directories, some times it let me do it, most of the times not. But as its a head unit i cant do anything more than what i can do when the system is running...
Ok wheres the problem, when i engage reverse gear, the unit detects it and goes to reversing mode were it looks for a video input from camera and after that a “no signal” messege is displayed, but doesnt let me go back or home, it stay there and there is no camera conected by wire, the camera is conected by wifi (i can perfectlly see it throw an app, and i connected it to parking lights so it starts before i reverse and wile im getting the place were i need to park it gets conected automatically).
What i need is to modify parameters on the head unit to open the reversing app in place of going to reverse mode when i engage reverse gear, do you think is yhis posible? If not, at least its ok for me to disable this function, so i can manually open the app, but as i told before, the unit gets the information throw a canbus decoder, so i cant just cut a wire.
Looked for a script or something, found a com.reversecar file but it dosnt let me modify it, i was just able to change “no signal” messege to “[email protected]” haha but nothing else. There is another file throw /sys/modules but i cant copy it to a usb or sd car so i have a back up if i delete it hoping that disables it.
So any ideas?
Thank you very much!!
Pd: A music control widget for apex launcher that can control stock music player (that is the only one that works with steering wheel controls would be great)
I think the idea is death already!! and New one comes to get all solutions!!
Hi All,
I'm about to attempt to upgrade my Harley RoadGlide's radio.
REEAALLLY like the fact that it will be a all-in-one solution (GPS/Radio etc)
Here is the plan:
Joying 8.8" 4gb /32gb Android 8 unit
Adaptor for 1 DIN radio ( Harley factory is a off the wall size more like a 1-1/2 DIN )
Module to retain handlebar controls (Works like a steering one)
Marine amp (with the remote power on a manual switch so I can shut the speakers off)
Bluetooth transmitter to send music to headset if needed
Before anybody points out the obvious, yes I know the unit is not marine grade..
This leads me the my first question:
How much heat does the display generate?
I was thinking on taking the bezel off, wrapping the whole back in vinyl up and over the edge of the glass and then putting the bezel back on. This would seal the display part since there is not reset/mic/pwr holes in the glass..
Mating the display with the body will be thru a custom device with seals to prevent water getting in at the connectors.
As for the "main" body it is pretty much protected being in the fairing. I will need a heatsink/fan but I think it will be ok.
Now on the operational question:
Can a bluetooth headset be connected directly to the unit? (For listening to music)
Any tips/advice?
Anybody ever done this?
Thanks !
Ok.. just ordered the 8.8" single din 4gb model.
Was 25% off. Black Friday sale. What can go wrong ??
Good thing about that model is that it is solid glass.. no reset/mic holes.. should make it easier to weatherproof.
The fun will begin when the unit gets here.
Lots of config/testing to do before I shoehorn that puppy in the bike.
I'll post pics if people are interested.
Been testing a couple of GPS apps on my tablet right now ahead of the integration and so far Sygic and Osmand are the best I found. Following a preplanned route is a must( ie to not deviate from the plan) , so if anybody has insight please point me in the right direction ?
Patiently awaiting the arrival of the unit...
The beast is here!!
Just received my unit ?
Got to say it is very well packaged
Will setup and start the testing soon.
Stoked!!!!!
Update/ Questions
Hi All,
Well.. the testing is going well.
So far i am able to get all my music audio to the Bluetooth headset by using a transmitter connected to the RCA output.
I had to use an external USB power for the dongle because the transmitter is "recognized" as a USB keyboard by Joying
I am using the soft button on the unit to turn the amp on/off when I want to use the headset.
I am able to use ZLink as well to connect the phone to the unit.
To have the headset capability for phone, I need to have the headset paired with the headset first.
Then I connect the phone to the unit using ZLink/Android Auto on 1 USB input
I can use the radio's display to control the phone and make calls.
All audio/mic is done by the headset. Yeah!
Only 1 problem.. The Joying keeps on wanting to connect Bluetooth to the phone.. Pops a request every so often..
Any way of turning this off? Only happens when Zlink is active...
If I connect the radio to the phone, it kicks the headset off...
Any way to disable Bluetooth entirely on the unit?
Unit is now rooted and I have installed JET.
Waiting for my handlebar controls converter in order to test "steering" functions.
Cheers!
Junior_1967 said:
Any way to disable Bluetooth entirely on the unit?
Click to expand...
Click to collapse
Can't you do that from the settings? Simply switch off Bluetooth?
Or is that when Joying keeps nagging to switch on Bluetooth? ("wanting to connect" can mean to connect because BT is active, or first wanting to switch it on and then connect)
I tried..
The Zlink app automatically turns bluetooth on I believe.
The bluetooth is off in my Joying settings.
It only happens when the Zlink window is "active"
So when I first connect I press cancel on my phone when the request comes in.
All good until I minimize the windows then re-activate it. Then another request comes in from the Joying unit...
I tried to disable the bluetooth in the app settings and Zlink refuses to open.
There is no "access to bluetooth" in the Zlink app settings..
Really more of an annoyance then anything else as I can just cancel the request...
Would really be nice to have some decent bluetooth settings on the unit to be able to connect any devices or change settings.
Or have some ZLink settings to not start bluetooth on demand since it's already been taken care of by the headset...
Thanks for the suggestion
Cheers,
Problem solved! Android Auto using headset instead of Radio for audio
Hi have solved the problem of Bluetooth wanting to connect all the time.
Solution: First time the popup comes in on the phone when connecting USB to the radio (I used Headunit Reloaded but ZLink should be the same), accept and enter proper password (0000)
Once connected, on the phone Bluetooth settings change Joying Radio to No Phone, No Media.
The next time it will not ask to connect and won't kick out the other Bluetooth (Headset)
Android Auto has to be in developers mode to not care which Bluetooth it is using:
To enable it, open the Android Auto app on your phone and choose About from the left menu. Tap the About Android Auto header text about 10 times and you'll see a prompt to enable developer options. Accept it, then hit the three-dot Menu button and choose Developer settings-> Application mode "Developer"
On to the next challenge!
Cheers!
This sounds interesting. Any pics on the install?
Yes pics please, what are doing are weather proofing the head unit or are you a fair weather rider
Hello guy`s
i have some issues with a 10.25" Android Navigation display i bought.
i also did some chat with the sellers but it seems their english is not very good...
From what i saw the system is the same PX6 System 2GB ram /32GB flash as sold for all other E Series BMW cars, only the additional mount is different.
Unfortunately i can`t attach pictures or extranal links yet, so i`m writing the Android spec here.
MCUVer: 023042bGS-CIC-HW7-190118[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer: 8.1.0
AppVer: 2019030801_1280x480_970
Ram: 2G
1st "issue".
when booting the device it does display the Lockscreen, not directly the BMW GUI, i have to swipe to unlock the screen.
any way to change this to go directly into the GUI?
I haven`t found an option yet.
2nd. issue.
Bluetooth does not work like it`s meant to from an Android Device.
there is only a bluetooth menu at the BMW GUI, where i can search for Bluetooth devices and connect them.
the problem is now, it only does find other mobile phones, it does not find the original CIC, not a BT headset, also not a BT mouse or BT keyboard.
when i go to to normal android settings "connected devices" i don`t have an bluetooth option here.
the BMW configuration has set "WenqiangBC6" BT Module enabled.
I want to use an additional Tsumbay Ai01 controller, but i also can not connect this device.
is it possible to reenable the original Bluetooth option there, i think it only has been disabled ?
3rd issue.
It has been delivered with an additional "pseudo" Idrive controller that is directly connected to the Android screen.
the problem is, that the controller will always only work for about 30-60 seconds, then it will not respond anymore, i have to reconnect the controller to get it work for again 30-60 seconds.
does someone also has this controller and had such trouble , or a fix for this ?
4th "issue".
I`m using google maps as i lost the Igo Software because a "factory reset" has been made.
when doing navigation, half of the screen is consumed by grey (bottom) or green (top) surfaces including the Status bar.
is there any chance to change the visuals of google maps to look like Android Auto or at least to make the bars smaller oder disable automatically disable the status bar ?
i have found no option for this, also not for scaling, probably it`s also disabled ?
5th "issue".
the harness does have alot of "CAN" connectors, "CAN A" "CAN B" "CAN C" "CAN 1" "CAN 2".
there did came no description whith the device, does someone have a description of the harness ?
i already updated the cartype.xml and factory.xml to get ID6 back, but that does not help for the other issues.
i hope someone can help me at least with some of the issues
sincerely Chri
Hello
I was able to "solve" the 3rd issue, when the Android navigation is set between Car and original CIC-HU, the original CIC controller does work fine so the pseudo controller isn`t needed anymore
The only thing is that i found a new issue,
7th issue,
the Aux Autoswitch option does go to the wrong menu point.
so when selecting "Music" it does not switch to AUX.
I made a video to show the Start to unlock issue and the Auto AUX issue, maybe this will help
https ://youtu.be/ETWdRfly6PY
you need to remove the space after https
sincerely Chri
Hey Chris, I'm also Dutch and I'm seeing a lot of the same issues..
Doe you know the factory settings code to get in the factory menu?
Thanks!
Hi to all
I have the same unit i get it from AliExpress navifly
I had the same exact issues like chris i did a factory reset and eventually i lost everything i did something wrong and now i have the unit is infinite loading on android and it’s not turning on. I am wondering if someone can help me with this and by the way the factory reset code is 1314
Has anyone solved the bluetooth problem? I just want to load normal android on it to be honest. Their audio bluetooth and phone stuff is taking control somehow. I don't even care for it.
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
GertrudeHarolds said:
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
Click to expand...
Click to collapse
meanwhile it`s a known common thing that Bluetooth is locked on this devices so only smartphones for playing music and do handsfree calling is possible, it is not possible to add other bluetooth devices like OBD dongles, mouse, keyboard ect.
Chri