3 weeks ago i successfully install a custom rom (cyanogen mod 4.2.13) in my Htc magic. It was my first custom rom try.
I used fastboot mode installation via terminal from pc. I did not flash any SPL or recovery image. I just used the recommended recovery img from cyanogen in fastboot mode.
The rom was working perfectly since yesterday.
The brick situation started after the time I performed a phone reboot* when the phone was charging (plug charging)
After that the phone did not boot at all. (no logo image nothing!!)
When I press the power button only the right LED of the phone becomes BLUE and nothing is shown in the screen.(black screen)
I tried most of buttons combinations in order to enter recovery mode but same result.
Any suggestions how to unbrick in that situation...
*phone reboot is extra function in cyanogen rom
did you do a battery pull? stupid question, but are you sure there's enough juice in the battery to boot? charge for a few hours and try again.
are you holding back+power, home+power for 5 seconds?
if you plug the phone into the computer can you detect it in anyway?
sorry for the dumb questions, but this is an extremely unlikely case of bricking, just trying to make sure it's not something obvious.
trackball stuck!!!
problem solved...there was no brick as i thought
i had done all of the above you stated.
The problem was that my trackball (or/and some other key) was stuck. This situation prevent the phone to boot in any way. This was realised when my phone booted successfully, actions in the phone are executed automatically without pressing anything. Magic was like crazy.
Very rare situation.
I have to open the housing inside for a proper clean.
thanx for posting
htc magic brikkato
ciao a tutti vorrei esporvi il mio problema o brikkato il mio htc mgic sbagliando rom qualcuno sa come posso ripristinarlo non si riesce a metterlo in boottloader o letto che ce un modo per mandarlo in boottloader e di saldare dei fili sulla sceda madre qualcuno ne sa qualcosa grazie del vostro aiuto
ferbosfofo said:
ciao a tutti vorrei esporvi il mio problema o brikkato il mio htc mgic sbagliando rom qualcuno sa come posso ripristinarlo non si riesce a metterlo in boottloader o letto che ce un modo per mandarlo in boottloader e di saldare dei fili sulla sceda madre qualcuno ne sa qualcosa grazie del vostro aiuto
Click to expand...
Click to collapse
English please.
Sent from my HTC Magic using XDA App
Related
After download and after Flashing procedure...The device is down....
I can see jus the white image HTC and stop....
Someone have the same problem and know how fix it??
Help me...
Dopo che ho scaricato la rom NEW_ROM_TIM_ITA_1.23.408.2_GPS (ING Special Edition) ROM e dopo aver fleshato il device....
vedo solo la scermata bianca HTC e si blocca tutto li...
qualcuno sa come poter risolvere il problema??
1) Enter booloader (hold power + camera button on the right then reset button)
2) Flash a proper OS of your chosing
io con la nuova 1.25 non ho nessun problema
I made a bad command on my Cruise...
post 2a
and after this now Cruise doesnt start and if i push all buttons nothing happend.
Any solution?
Thanks
tried a hard reset yet?
And what bad command did you gave?
ehm...
Doesnt start, no light, dead.
If i press soft reset, hard reset or boot procedure... no live.
Did you retry with the correct commands ???
Why did you use Mtty ???
You bricked your Polaris, that's all.
Ti rispondo anche in italiano;
Con quel comando hai ucciso il tuo Polaris, devi mandarlo in assistenza sperando non si accorgano del danno che hai fatto o ti faranno pagare un sacco per la riparazione.
udK said:
Ti rispondo anche in italiano;
Con quel comando hai ucciso il tuo Polaris, devi mandarlo in assistenza sperando non si accorgano del danno che hai fatto o ti faranno pagare un sacco per la riparazione.
Click to expand...
Click to collapse
means:
With that command you killed your Polaris, you must send in assistance, hoping not aware of the damage you've done or you will pay a lot for repair.
I love Google translate
Hi to all, I'm new on XDA, I've tried to search for my problem but I didn't found anything...so I hope not to say anything already said.
Since few days, the front keys on my TyTN gone mad!
Let's get through:
I was answering to an incoming call, and the green button didn't work. Then, in normal use of the PPC, I noticed that even the other keys stop to work. I soft-resetted the PPC, and the keys apparently restarted to work, maybe not at all, maybe all.
After, the problem reappears. The keys worked for a moment, and then they didn't. I tried an HARD-RESET, I flashed a WM6.1 ROM, but I started to think it is an HW problem, and searching on the net I understand this problem is quitly common on Hermes...but NOONE of who had spoken about the problem seemed to find out any solution...
Does anyone here know about this?
Bye bye and thank you anyway
***ITALIANO***
CIAO a tutti, sono nuovo di qui, cercando tra i thread non mi sembra si sia parlato del mio problema e mi auguro di non ripetere qualcosa di già detto.
I tasti frontali del mio TyTN funzionano a singhiozzo.
Da qualche giorno, mentra stavo rispondendo a una chiamata, ho notato che il tasto verde non funzionava. Nel normale uso ho visto che anche gli altri tasti non funzionavano. Dopo un soft reset tutto sembrava essere a posto ma in breve è ricominciato, stesse modalità. I tasti vanno a singhiozzo, ogni tanto vanno ogni tanto no, magari non tutti insieme.
Ho provato un hard reset, a installare la rom WM6.1, ma il problema è persistente. Su internet pare essere una cosa molto comune, ma NESSUNO sembra aver trovato una soluzione efficace.
Nessuno sa qualcosa?
Ringrazio in anticipo,
ciao ciao
hitting the on/off button to suspend it and turn it back on should help. but it wont entirely go away...
Wow...I'm bound to keep my PPC that way ?
Could HTC do anything?
looks like the cords strip of your phone is broken.there is strap cord in the sliding tray after many times of opening closing i meant realy many times it brokes try to go to hardware shop and find the cord strap it will be fine.hope this info will help you to understand your problem and you will stop hitting your head coz this is a common problem with all sliding phones so dont worry find the strap cord if you will enjoye your device again if not find a good buyer who cant see or feel or move or check the phone (it could be the dead one only) and sell it.sorry its just a joke i am having the same phone but since i baught it the shop owner advised me about sliding so i rearly use it thats why i am still enjoying the device.
take care bro
i have the same problem but i can't fix it.
Italiano
Io ho lo stesso problema ma non sono riuscito a risolverlo e a me dava anche lo schermo bianco!!
Buonasera a tutto il forum...
sono un tecnico informatico ed ho ricevuto in assistenza da un amico/cliente un Trinity che va sempre in modalità bootloader appena acceso...
Il Trinity in questione è originale come rom e tutto il resto...
L'Activesync 4.5 sotto XP SP3 non lo rileva... se provo ad usare l'utility MTTY mi da che non riesce ad aprire l'USB... ho provato diverse volte ad flashare sia l'spl 1.2 che l'1.3 senza nessun risultato positivo... il display del Trinity segnalava l'avvio dell'upgrade ma dopo 1 secondo si riavviava (sempre in modalità bootloader) ed il pc dava file di aggiornamento corrotto...
ovviamente come da FAQ ho riprovato diverse volte ad effettuare questi aggiornamenti ma sempre con lo stesso esito...
Ho provato ad installare direttamente da MiniSD la ROM cucinata con il WM6.1 ma non tenta manco di installarla (ovviamente ho ridenominato il file come TRINIMG.nbh)... provando a fare l'aggiornamente alla ROM originale che avete postato qui (quella da utilizzare per mandare il telefonino in garanzia)... ed utilizzando sempre il metodo della MiniSD mi fa effettivamente l'aggiornamento... ma quando riavvio il telefonino mi va sempre comunque in modalità bootloader...
inutile dire che soft ed hard reset sono stati ampiamente provati...
Come la risolvo questa situazione?
Ringrazio anticipatamente per le Vs. risposte
Francesco Pennelli
Mod Edit:
It is a forum rule to provide an English translation - on this occassion I have done a google translate (next time the OP must provide it)
English
Good evening to all the forum ...
I am a computer technician and I have received assistance from a friend / client a Trinity that is always in bootloader mode just lit ...
Trinity in question is original as the Roma and the rest ...
The Activesync 4.5 under XP SP3 does not recognize that ... if I try to run the utility MTTY me who can not open the USB ... I tried several times to flash the SPL is 1.2 that the 1 .3 with no positive result ... the display of Trinity signaled the start the upgrade but after 1 second restart (always in bootloader mode) and the PC gave update files corrupted ...
FAQ obviously as I try several times to make these updates, but always with the same outcome ...
I tried to install directly from the MiniSD ROM with WM6.1 cooked but not even try to install it (obviously I renamed the file as TRINIMG.nbh) ... trying to do the upgrade to the original ROM that you have posted here (the one to use to send the phone under warranty) ... and always use the method of MiniSD me the upgrade ... but when I restart the phone is always still in bootloader mode ...
Needless to say, soft and hard reset have been extensively tested ...
Like I fix this?
Thank you in advance for your answers
Sorry I didn't noticed the rule about writing the questions in both Italian and English... here is the translation made directly by me about this question:
Good evening to all the forum...
I'm an IT Technician and I have a Trinity of a friendly customer of mine to check... this Trinity is always going in bootloader mode as soon as you switch it on...
This Trinity has the original rom and spl on...
MS Activesync 4.5 is not able to detect it under Windows XP SP3... If i try to use the MTTY utility I receive an "i can't open the USB port" error...
I tried several times to flash both version of SPL... 1.2 and 1.3 ... but I had no positive result... Trinity display show the start of the upgrade process but after 1 or 2 second the device reboot (always in bootloader mode) and the PC utility show the corrupted updating file error... I tried as advised from the FAQ to update again without changing anything... but i had the same result.
I also tried to install directly from the MiniSD both the cooked WM6.1 ROM or the original ROM posted on this forum (i renamed each file to TRINIMG.nbh before copying them to the FAT32 formatted MiniSD)... the update of the cooked one is not even starting... the one of the original ROM arrive until the end without any problem... but when I restart the mobile it keep going in Bootloader mode
I have of course tried to do both soft or hard reset several times...
What I have to do to fix this problem?
Thanking you for your quick reply I await
Francesco Pennelli
please help .. I'm not a noob, but this time I've probably done damage.
I installed a ROM on my HD2, probably without the radio accurate (I think I installed and I'd rather have another), once installed on the ROM cell has successfully started, I sent SMS, made phone calls, then I Google Maps 4.0 installed in phone memory I did a soft reset and now it gets stuck with the writing htc green on a white background and not charged. I do not know what to do can you help me? the phone is not synchronized so I can not do anything to flash new ROM or radio. Help please
I'm sorry for my english i use google translate
-----------------------------------------------
Aiuto perfavore.. io non sono un noob, ma questa volta probabilmente ho fatto un danno.
ho installato una ROM nel mio HD2, probabilmente senza la RADIO esatta (credevo di averla installata ed invece ne avevo installata un'altra), una volta installata la ROM il cellulare si è avviato correttamente, ho mandato SMS che, fatto telefonate, dopo ho installato Google Maps 4.0 nella memoria del telefono ho fatto un soft-reset e adesso mi resta bloccato con la scritta htc verde su sfondo bianco e non carica. non so che fare mi potete aiutare?il cellulare non si sincronizza quindi non posso fare niente per flashare nuove ROM o RADIO. Aiuto perfavore
1] Have you tried a hard reset? It is recommended that you hard reset after installing a new ROM.
2] You can load a new ROM via the MicroSD card so you don't have to have it sync'd. Have a look at the ROM upgrade section
dino_Donis said:
1] Have you tried a hard reset? It is recommended that you hard reset after installing a new ROM.
2] You can load a new ROM via the MicroSD card so you don't have to have it sync'd. Have a look at the ROM upgrade section
Click to expand...
Click to collapse
Yes i reset memory card too because i had english rom and i install italian rom....
i try with MicroSD Card now...
everything ok .. I went into boot load and I flashed the new radio ...
thanks
well if you want to delete the post ... thanks