Related
Hello
I am trying to get my Hero to connect with my Lexus RX400h's bluetooth car-kit. I can pair the Hero with the car but it will not reconnect. Is there a way to authorize the Hero to alway reconnect without having to re-pair?
Any help would be great.
Thanks
Jon
It should remember it. I've never had a problem with my own bluetooth kit.
I get paired but not connected with my thb bury kit there are lots of posts on here about bluetoth issues 5 series bmws also have problems, htc support say they are waiting for an update from google
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Toyota TNS 510 carkit wont work either. It pairs ok, it even pairs the A2DP system. When pairing is finished a little message appears on the phone saying there was a problem with the bluetooth handfree thingy.
andy2111 said:
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Click to expand...
Click to collapse
What model year is your RRS ? My MY08 D3 works fine with the Hero... contact list navigation is far better than my 'old' Nokia N85. If your RRS is pre MY2008 there is an ECU update for the Bluetooth PTI I believe.
I'll add a Jaguar XF to the list. Hero will pair ok, then it will disconnect. it will disconnect a few times before it settles down. Whenever it tries to auto-connect, it will disconnect 2 or three times before it stays connected. sometimes it wont connect at all, a quick disable, then re-enable of bluetooh on the hero then gets it to connect again.
Didnt have any problems with any BlackBerry's, Touch Diamond, Nokia e52. Looks like we're waiting on Google for a fix. I wonder if their continual beta policy applies to updates as well as full blown applications?
Peugeot 407 SW ('07)- Pairing okay, connects okay too. On phone call the radio is muted, call picked up (on incoming), but the sound keeps coming through ear piece for 4-5 sec and then it eventually switches to speakers.
HTC cust support not very supportive... pointing me to go to the car manufacturer for support... :s
The Hero and/or Android does not support the bluetooth stack's remote Sim Access Profile (rSAP/SAP) required by many car kits (VAG, Lexus etc.). This might be the issue here.
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.29
Let your car do the pairing
Turn bluetooth on your phone and let your car discover and pair with the phone. Your carkit will suggest the passcode enter it in you phone and not the other way arround. That might work, It did for my Porshe.
How do you transfer bluetooth contacts??
Hi. I have my bluetooth car kit working fine, it is with a pioneer head unit. At first i would have to manually connect it, as the phone can only be made visible fo 120 seconds. Hoever after doing this 5 or 6 times, it then automatically conected every time. Just keep trying and see if it eventually does it.
Also.... How do you transfer your contacts lists to the bluetooth device?? I cannot find anyway!! please help!!
No Go on the Mazda 3
just bought a 2010 Mazda 3 sport and the bluetooth does not work with hero.
it pairs with the phone and then occasionally connects. however when you dial a number by voice or keypad the system in the car locks up completely for about 4 mins. tried other phones and works perfect.
Strange thing is it did work once for a day but then went all haywire after that.
would rooting the phone and installing a different rom open up the bluetooth any more so it can communicate better.
Dont want to get rid of the phone but unless i can find a remedy im gonna have to get a different phone.
I have Lexus ES350 2007, It's paired and auto connect with no issue! I have a tiny issue with incoming call in navi screen it display "not supported" instead of caller name!
Also it ringing in my Hero for 4 seconds then it ringing in my car?!
Thanks
Sorted
Well ive sorted th bluetooth problem.
once paired as long as i dont turn off bluetooth on the phone then it connects / reconnects just fine. if i do turn bluetooth profile off then when pairing i need to make phone visible before i get in the car and it picks it up again.
sorted.
2010 Mazda 3 and HTC Hero Bluetooth
Have the exact same problem as Wingy999 and if I leave the bluetooth switched on on the phone I have no problem.
But if I do switch it off/restart the phone, even if I make the phone visible when I get in the car, it does not connect and I have to delete and repair the phone to the car.
Can you help wingy999?
Yes/No
Well its a case of Yes it is and No it isnt.
Sometimes, for a few days i have no problems with phone. Then for no reason it decides to connect (picture of the phone on dash) but it cant communicate with the car. So when you dial it just hangs the system.
Got sick of pairing it to be honest so have left it for now. i wondering if rooting the phone might be a way forward.
yeah, no clue if rooting will help, but im def waiting for it to be possible. lots of cool things that can be done.
the bluetooth problem is to do with the android bluetooth api itself from what i understand. google haven't figured it out entirely yet and so only released it with basic functionality. even once modders are able to get inside the cdma hero, i dont think they can get at the low level bluetooth functionality and make changes. I could be wrong, but if it were the case, we'd see things like obex object transfer available on the GSM Hero's already.
I also have the same problem with my 2010 Mazda 3 and my sprint HTC hero.
I am probably going to have to return the phone. I was hoping for an update or a fix.
It is critical that the bluetooth feature works.
Another annoyance is that I cannot turn the bluetooth streaming audio. Even though the car and phone both have this feature, I do not want it on. I want to be able to turn on bluetooth for phone but not bluetooth streaming audio.
The HTC touch pro 2 (windows mobile) could turn each of the 2 bluetooth services off independently (and worked for both), the HTC Hero does not allow this (and doesn't work with the car anyway).
Huge thumbs down for an otherwise great phone.
My issue is with a Jabra SP700 Bluetooth speakerphone. My phone is paired, is detected and the phone even says 'Bluetooth Headset Connected'.
However, sound is not routed to the speakerphone, it just comes out of the phone speaker...
FYI I'm running MCR 2.8.
BMW 1 series 08 and HERO
Before I buy an HTC Hero does anyone know if it will work with my BMW 1 series
I just got a TMOUS HD2 and had the same problems a lot of other people are having connecting it to my car. It connects to the car correctly, downloads the address book, but no sound comes through the cars speakers and the call doesn't register on the cars phone display. I searched XDA and there seems to be a bunch of registry change posts that don't seem to work all the time and disable some features. By doing the following I get it to work consistently with all the features enabled.
1) Turn off the data connection and Bluetooth in Comm Mgr
2) Turn on Bluetooth and connect (or pair) the phone with the car
3) Make a call
4) While in the call, turn the data connection back on
It works for my Land Rover RRS and stays working until I reset the phone. After I reset, I just go through the above procedure again.
I don't know if it works for every car make but it should work for most Volvos, Jaguars, and Land Rovers since most of them use common bluetooth systems.
Hope this helps somebody.
I am having the same issue. I have to manually connect the music stream. The phone stream always connects. Hoping for a fix from T-Mobile.
kevev said:
I am having the same issue. I have to manually connect the music stream. The phone stream always connects. Hoping for a fix from T-Mobile.
Click to expand...
Click to collapse
My car doesn't support A2DP - the phone's separate from the audio head. All the car's phone features work though - voice recognition, conference calling, transfer to and from the handset, and address book and digit dial. I wouldn't hold my breath for a fix though. It's the WIDCOMM Bluetooth stack that HTC started using with the TP2 so there are over a year's worth of complaints logged with HTC and no sign of a fix.
well, not much to be said for the Microsoft bluetooth stack either. I have a 2010 LR4 and can't get my HTC Raphael/Touch Pro/Fuze to keep a connection. Hard to know what the problem is, starting a WiFi or GPS session often resets the connection, in addition to the random drops, sometimes mid-call.
When I tried an iPhone though, it worked fine, naturally.
I'm having much fun with my new Legend, and I love android 2.1!
Everythings goes smooth except the connection with my car.
I have a pretty new Audi TT from 2008, and with my old phone (t-mobile G1), I used it without a problem for over a year.
One month ago I bought the Legend, and bluetooth connection to the car seems to hang!, Even when I disable bluetooth, the phone becomes slow, and the bluetooth icoon keeps displaying in my notification erea.
One thing works, when I reset the phone, I can use the carkit for about 10 minutes, then it starts to disconnect. The adress book never syncs.
Can people please reply if they got their legend work properly with their bluetooth car kit.
Also when other people have problems, please reply here!
Thnx
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Same problem here. Kenwood DDX7029 with BT. 5 out of 10 times the phone won't connect when starting the car. Dis- and enabling BT does the trick.
David67 said:
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Click to expand...
Click to collapse
This implies that if you disable data-roaming, it would work all the time?, I'm gonna try that out! Thanks for your reply!
Hi there. My first post in XDA
So cool that I found this thread because I have the exact same problem. I have an Audi A3 and the bluetooth connection is 9 out of 10 times lost during conversations and then the bluetooth icon just hangs until I boot the phone.
I'm gonna try to disable the data-roaming and see whether it works.
Still problem carkit/bluetooth Legend!!
Hi all,
I still/also experience problems with my Audi A4 carkit.
Also my colleague with a Opel Insignia experiencing the same problems.
I have to reset the bluetooth or reboot the phone te fix it
It is very annoying when you loose the bluetooth connection within a call.
I have already sent a message to HTC...and still waiting!
Switching off the data roaming or fix the UMTS/GSM settings doesn't help
Somebody a sollution?
Br Dide
Audi UHV 6654 problems
I have a BIG problem with this car kit connection...BIG means the device is useless till now.
I've paired the Legend with my A4 factory car kit and there are several problems:
1. No sounds come from the speakers (car speakers), still the michrophone is working fine. I had to put the phone on loudspeaker to hear something but of course this is not the normal way of using a car kit
2. There is no sound till the call is actually ongoing (the other party respond)...that means no ringing, busy tone, or whatsoever sound... I don't even know if the call is made if I'm not looking to the phone (and if it's entering power saving mode, I stare at a blank screen).
I don't have any problems of this kind using a Nokia phone and also they (especially point 2) are happening with all smartphones I've tried (WinMo or Android ones).
Is there any software (even a paid one) to outcome this?
Please don't tell me to "try" this and that, I don't want to spend money "trying" things...I would appreciate if someone had a similar problem and managed to solve it somehow.
P.S The phone is brand new (got it for 2 days by now) and it is not rooted.
P.S.2 The car kit is a "basic" one, don't have navigation, contacts downloading and all that stuff...It's a plain BT car kit, I would just like to be able to make and receive phone calls with it.
Seems like many have bad experience in making the legend and car kit work together.
As of yet I could only pair my legend with my blaupunkt audio system, but they have not yet connected each other successfully to make use of the bluetooth feature. I've had no problem at all using my audio set with my samsung galaxy spica's bluetooth. So it probably is not an android issue.
Is there anyone who didn't experience any such trouble with their legend and car audio system's bluetooth ?
To add some more details...
I search for BT devices, phone finds the Audi UHV car kit. Then I'm asked for the pairing password and I enter it, than I get that "connection sound" from the car speakers but the phone is still "connecting..." endlessly. The BT icon on the phone appears but is the standard one, no headset or car kit icon appears (does it have such an icon after all?)
From here...nothing special happens. When I make or receive a call only the phone is ringing, no sounds came from the car speakers. Only when the call is connected, then I have the bord computer showing "Call..." and the radio/CD is muted...and that's all. The conversation can be heard only into the phone not from car speakers as it was the case with the ringing tone before. When call ends, music resumes.
I have paired my x10 with my car's bluetooth phone system(BMW) but the directory from my phone does not transfer to the car. My previous phones (blackberry tour, ,nokia n95) was able to do this automatically. Any ideas or is this an android OS problem (like bluetooth voice dailling)?
Also does the Voice Dialler app on the x10 actually work? I have never got it to do anything I say (might well be just me as I have the same problem with my kid).
akira_au said:
I have paired my x10 with my car's bluetooth phone system(BMW) but the directory from my phone does not transfer to the car. My previous phones (blackberry tour, ,nokia n95) was able to do this automatically. Any ideas or is this an android OS problem (like bluetooth voice dailling)?
Also does the Voice Dialler app on the x10 actually work? I have never got it to do anything I say (might well be just me as I have the same problem with my kid).
Click to expand...
Click to collapse
the dir transfers and voice dailing works perfect with my fiat blue and me system...
I can't access my phone book from my car deck either. So basically I have to dial from the phone and then use the bluetooth to speak with. Also when streaming songs from the phone to the car deck, the name of the song being played won't be show. It displays unknown on my car deck. However with a blackberry or iphone it shows the exact name of the track being played and etc. Is there any way to fix this, I'm 100% sure it's not a problem with my car's deck since other phones that I pair with it don't have this option. I haven't tried voice dial yet... shall try it in a day or two and see if that works or not.
Its a bug from android itself not sony they fixed it in 2.0,lots of pioneer unit wont connect at all,under the bluetooh setting ,after you have discover your device,you will see the name of it,press on it and hold another menu will open.Go option and then deactivate the second option.IT should help worked for me on my pionner device.
I have a Ford Fiesta (2014 model, with Ford Sync 1; looks like this) and have had previous phones connected to this system with no issues previously. In fact the last phone connected before my S10+ was an S9+ and it worked great.
But... since I got the S10+ and connected it, I am having a weird issue with phantom calls. Specifically, when I get in the car, start the engine and the phone then finishes connecting over Bluetooth to the car it will make a phone call. However, the phone call is to "Unknown Number" and is completely silent. There is no ring tone, no answer on the other end, and the call does not show up in my Recent Calls screen in the dialler.
I have other Bluetooth devices connected/paired such as a smart watch, speakers and headphones, but the phone does not make this odd call when they connect - only when my car connects.
Appreciate this is a very specific problem with only my phone and the particular variant of Ford Sync I have in my car affected (and even then, only in my car!) but does anyone have any idea what might be going on here or how to stop it?
Thanks
kingdave82 said:
I have a Ford Fiesta (2014 model, with Ford Sync 1; looks like this) and have had previous phones connected to this system with no issues previously. In fact the last phone connected before my S10+ was an S9+ and it worked great.
But... since I got the S10+ and connected it, I am having a weird issue with phantom calls. Specifically, when I get in the car, start the engine and the phone then finishes connecting over Bluetooth to the car it will make a phone call. However, the phone call is to "Unknown Number" and is completely silent. There is no ring tone, no answer on the other end, and the call does not show up in my Recent Calls screen in the dialler.
I have other Bluetooth devices connected/paired such as a smart watch, speakers and headphones, but the phone does not make this odd call when they connect - only when my car connects.
Appreciate this is a very specific problem with only my phone and the particular variant of Ford Sync I have in my car affected (and even then, only in my car!) but does anyone have any idea what might be going on here or how to stop it?
Thanks
Click to expand...
Click to collapse
I have the newer sync so I'm not sure but does Sync 1 have the system diagnostic that calls back to Ford? It almost sounds like that because when it called you didn't hear anything or see a number. Although I don't know why it would start with the S10. I guess you completely removed the phone from Sync and repaired it. This might be a good question for one of those Ford Owner Forums if you don't get anything here. I'll be pairing my S10 to my Sync 2 today or tomorrow so I hope I won't run into this.
Tel864 said:
I have the newer sync so I'm not sure but does Sync 1 have the system diagnostic that calls back to Ford? It almost sounds like that because when it called you didn't hear anything or see a number. Although I don't know why it would start with the S10. I guess you completely removed the phone from Sync and repaired it. This might be a good question for one of those Ford Owner Forums if you don't get anything here. I'll be pairing my S10 to my Sync 2 today or tomorrow so I hope I won't run into this.
Click to expand...
Click to collapse
It has an Emergency Caller function (i.e. if the system detects a crash/sudden impact it will call the emergency services) but I don't think this is what is happening here. I'm usually sitting still when this happens (start engine, systems come online and phone connects, while it's doing that I put my seatbelt on) and the call is completely silent - I thought my radio had lost signal the first few times I did it and then spotted the outgoing call to "Unknown Number" on the Sync screen.