Been trying to unlock this phone for days now, bought in japan(ntt docomo)
Have the unlock code and all, but unable to get to the point where i enter the code. Also read that I had to flash the sd card or something, but just keep getting the message "not allow" at some point. If anyone have some tips it would be highly appreciated.
edit; and ive tried rebooting it with new sim
Any help for a guy who has basically no clue of programming?
Yours,
Stefan!
oh, and its one of those 0006 models ^_^
1.5 or 1.6?
Are you running 1.5 or 1.6? If you are running 1.6, you are in for a bit of fun.
Some Japanese guys have used this site to unlock BEFORE the 1.6 OTA because the generated code only works on Docomo's 1.5 firmware.
NOTE: Remote unlock by IMEI is not supported on the newest DoCoMo firmware update. User must downgrade the ROM to the old version or flash a custom ROM without DoCoMo branding on the device prior to unlock it. We do not provide instructions on how to flash a different ROM.
Click to expand...
Click to collapse
The OTA to 1.6 hit me on 10/27/2009 and rolled out over the course of a week. If you phone was in use in Japan after this time, then it's probably running 1.6.
Apparently can unlock ht-03a v 1.6... for about $100US
Just ran into a site that seems quite shady but nonetheless claims to be able to unlock 1.6 in 3 days for 10,000 yen eek. Their regular price is 8,000 yen (which is still too expensive) if you are still running 1.5. This could just be classic bad web design still common in Japan that makes the site look shady.
Basically, they are saying no functions will change by unlocking and not to upgrade beyond 1.6 after unlocking (assuming 2.x ever is pushed by docomo). And that if your phone is version 1.5, they will return it to you unlocked and running version 1.6.
Purely for my amusement, I paste the machine translation of their site (provided by them "hear")
Release charge;VERSION 1.6 of \8,000 and HT-03A is \2,000UP.
- Details of release
There is no change in a portable function etc. after it releases it.
Release days
- HT-03A is SOFTWEAR [bajon] 1.5 is the first.
It takes VERSION 1.6 about three days. (\2,000UP)
- It takes HT1100 about three days.
Request trivia; After it releases it when VERSION of HT-03A is 1.5, VERSION UP is done to 1.6.
I will pass it. (When networking if you do not do The demand of VERSION UP is usual [deru]. )
The problem is not in VERSION UP after it releases it.
Without doing VERSION UP when VERSION of VERSION 1.6 or more (1.6 is OK) goes out
Please give to me.
Click to expand...
Click to collapse
PS - "release" = unlock
its 1.6 yes, and thats just too expensive
thx though!
Agreed - stupidly expensive, so your only other option is to root and flash a ROM other than Docomo's 1.6
Mind telling me how to do that? been trying for ages. Does it mean doing something to an sd card? is there a guide i should follow? tried yesterday, but just got the "not allow" message
Haha, sorry but I can't be cause I don't know how - which is why I originally said something about your going to be in for some fun if you have 1.6. The information is here. There are wikis, but I haven't had a need to do it, so I am not up on what needs to be done. I know that it was much easier with 1.5 (one click) but not impossible with 1.6. Dig around this board and hopefully you'll get tossed in the correct direction.
If you are using this phone in Japan on docomo's network and you do succeed in flashing a new ROM, be careful with the APN setting for data transmissions because you can end up with a very high data bill if you connect to the wrong one.
Good luck and hopefully someone might chime in with links appropriate to the ht-03a.
if u trying to unlock the phone to use any sim card in it and u already have the code, u need to put the sim card of the new network u r trying to use, when the magic boots up, it will ask for the code, u enter it and thats it, u r unlocked
Doesnt work, already tried that :F
achillies400 said:
if u trying to unlock the phone to use any sim card in it and u already have the code, u need to put the sim card of the new network u r trying to use, when the magic boots up, it will ask for the code, u enter it and thats it, u r unlocked
Click to expand...
Click to collapse
That does not work with the firmware provided by Docomo.
stefan2612 said:
Mind telling me how to do that? been trying for ages. Does it mean doing something to an sd card? is there a guide i should follow? tried yesterday, but just got the "not allow" message
Click to expand...
Click to collapse
Did you see this?
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking
Also, here seems to be full instructions on how to move down to 1.5. I have no idea how, if at all, these instructions would be different for Docomo's ROM on the HT-03a.
http://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/
Good luck. If you learn anything, let me know
Thanks, ill see if i can get this to work! If not i guess ill be forced to check out some cable guy, or someone with a clue
Didnt work, thought id try the htc sync one aswell, but it never recognized my phone, even if i installed drivers, reinstalled them, updated, everything. And yes, i did fix the debug settings etc on phone.
I guess you are using windows, not something unix-like (linux or mac), right?
Towards the end of this thread, the discussion moves towards getting Win 7 to recognize phones for using ADB. Maybe something here could help.
http://forum.xda-developers.com/showthread.php?t=502010
have mac and windows, but htc sync wasnt for mac so ^^
Wait a minute... Like I said, I've never tried this, but I don't believe you need to use HTC sync. I could be wrong. I think you need to use ADB, which is part of the SDK. ADB allows you push files to handset, as well as get an interactive shell. Basically, it gives you command line access to your phone from your computer.
If you have ever used the terminal app on a mac, that is where you would use ADB.
Once you have ADB up and working, you can type stuff like ADB devices to get a list of connected phones or ADB shell to get an interactive shell.
yeah ive tried that too, only got msgs saying not allow
stefan2612 said:
yeah ive tried that too, only got msgs saying not allow
Click to expand...
Click to collapse
If you give me more information, then I may (or may not) be able to help.
What exactly was not allowed? Does ADB work at all?
What step in what howto did you make it to?
Are you able to get ADB to detect your device?
Are you using ADB on win or mac? win 7? mac os 10.6?
Did you get a permission denied (or something that) error when you tried to push a file with ADB?
For the docomo HT-03A sim unlock, you need to have a rooted phone first...No way around it that i have found... hell its a twofer... basic rom isn't any fun anyway...
I have gotten 7 Sim unlock codes from swiftunlocks at gmail.com, email him and ask...
I first found him on ebay... so he is probly still there...
My bigger question is how to get around the IMEI filitering done by Docomo's bizhodai APN... I WANT A NEXUS, but if I can't have unlimted Data it could be the death of my bank account...
thisoneguy said:
For the docomo HT-03A sim unlock, you need to have a rooted phone first...No way around it that i have found... hell its a twofer... basic rom isn't any fun anyway...
I have gotten 7 Sim unlock codes from swiftunlocks at gmail.com, email him and ask...
I first found him on ebay... so he is probly still there...
My bigger question is how to get around the IMEI filitering done by Docomo's bizhodai APN... I WANT A NEXUS, but if I can't have unlimted Data it could be the death of my bank account...
Click to expand...
Click to collapse
Only if you are running Docomo's 1.6 ROM, which he is (which is why his unlock code doesn't work). The 1.5 ROM would accept IMEI-generated unlock codes and was rootable in one click.
But I can't really help this guy as I have not tried to root my HT-03a, which is also on 1.6.
Quick question: So it is NOT rumor that docomo is filtering the biz-hodai APN by IMEI number? People commenting on my blog say that docomo refuses to register the IMEI of a phone if it is not from docomo.
Sucks.
Can you point this guy in the right direction for rooting specific to the HT-03a?
Also, check the link to a Japanese site I posted at the beginning of this thread. If it is worth 10,000 yen, sounds like they can do it. 10,000 yen is too much, though.
Related
Ok let me see if I can explain my problem right. I got an android locked to t-mobile USA I am planning to but an unlock code for this phone but the problem that I encountered before buying the code is this this phone come with an application that when it start up it asks you to to set up your gmail account but I am in mexico I am not interested in having a gmail account how can I delete this application or stop it or skip it otherwise I am not going to be able to use the phone what can I do I like this phone but it is useless in the state that it is help
Not having a gmail account means you wont be able to use the market, your contacts wont sync, the included calendar app wont work very well. There may be other issues as well.
Do you hate google or what? A gmail account is free.
no thats not the reason I dont hate google it is just that at the moment when my android turns on it start up with this message
Setting up your T-Mobile G1 I tried to register but it wont register and I can not even use the phone functions the android stays on trying to register this what I do
i try to register then a message comes up that says that it may take up to five minutes but after a while another message show up and it says
there is a problem comunicating with google servers
this could be a temporary problem or your sim card may not be provioned for data services. If it continues call customer service
well the bottom line I really want to use this phone but how can I get pass this registering bull
here in mexico we run into this problems all the time our cell carriers suck basically i just want to be able to use the phone functions only if anyone can help I will apreciate it.
http://forum.xda-developers.com/showthread.php?t=452316
You may need to downgrade to RC29 depending on what version your phone is currently running.
Also, I'm not sure if your carrier, or any at all, block by IMEI if a phone is reported stolen. I'm not accusing you of stealing, but, you know...
elvences said:
no thats not the reason I dont hate google it is just that at the moment when my android turns on it start up with this message
Setting up your T-Mobile G1 I tried to register but it wont register and I can not even use the phone functions the android stays on trying to register this what I do
i try to register then a message comes up that says that it may take up to five minutes but after a while another message show up and it says
there is a problem comunicating with google servers
this could be a temporary problem or your sim card may not be provioned for data services. If it continues call customer service
well the bottom line I really want to use this phone but how can I get pass this registering bull
here in mexico we run into this problems all the time our cell carriers suck basically i just want to be able to use the phone functions only if anyone can help I will apreciate it.
Click to expand...
Click to collapse
Ok... Long story short:
The G1 is a "google" phone and is dependant on data services and a google account to operate. That being said, the only way you can work around this without having a solid data connection (through your cell provider) is to go the process to root your phone and use one of the builds that allows you to skip google registration. I know TheDude's build lets you, I'm not sure which other builds do. By skipping the sign-in process you would still be able to use wireless internet to get your phone to sync with google once you turn on wifi.
Of course, your phone will have to be unlocked if it's not already.
I suggest you look at the development forum and start reading the links from the "round-up" sticky on the very top.
Thank you everybody for your quick responses but it seems that i am still stuck in the setting your account bull.- i try to root my android but i can even get to format my m sd card as a follow instruction in how to root phone it says to wait until mount show up on my screen how am i suppose to do that when my phone wont get past the setting up account screen can i format m sd card with adapter and then load the rc29 and put it back on my android and follow the rest of the intructions will that work i dont want to try it just like that has anyone else done like this is this going to brick my android.
elvences said:
Thank you everybody for your quick responses but it seems that i am still stuck in the setting your account bull.- i try to root my android but i can even get to format my m sd card as a follow instruction in how to root phone it says to wait until mount show up on my screen how am i suppose to do that when my phone wont get past the setting up account screen can i format m sd card with adapter and then load the rc29 and put it back on my android and follow the rest of the intructions will that work i dont want to try it just like that has anyone else done like this is this going to brick my android.
Click to expand...
Click to collapse
Yes, if you have a card reader you could put the dreaimg.nbh, update.zip and recovery on your sd card and never have to mount your phone to the pc.
Or just use another device with a memory card reader or writer. Or even better, install ADB, go into the recovery window by pressing home+power and on your computer enter the ADB interface and type in
adb mount /sdcard/
adb push (location of firmware).nbh /sdcard/
and voila.
Hey I downloaded android-sdk-windows-1.5_r2 isnt this file suppose to have everything I need to work in my android but it doesnt where is ADB at and I am suppose to have and update zip and restore it doesnt say anything about that in development. I am liking this but it seems difficult but thats why I like it just show me where this files are at and I promise that I will at least brick my android lol not really but I hope I get it working. Well this are the instructions in how to root.
Format your phone's SD card to FAT32 mode:
Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
Click the notification, and then click "Mount".
A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
Turn the device power off.
Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
After it is finished, perform the restart your phone.
see it doesnt say that I need and update zip and a recovery. But I might be wrong so where are this files at
skri11a said:
I suggest you look at the development forum and start reading the links from the "round-up" sticky on the very top.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=442480
http://forum.xda-developers.com/showthread.php?t=455860
http://forum.xda-developers.com/showthread.php?t=502010
http://forum.xda-developers.com/showthread.php?t=517874
I have cut to the chase and given you the direct links in the stickies that you were supposed to have already read if you were following the very good advice from skri11a.
After reading this, you should have all of the knowledge you need to make your phone work... If not, come back here and we can clarify any further questions.
If you continue to refuse to help yourself, there is a good chance that this thread will be locked, closed, fired, deleted, or shot into space.
Well I am back after reading and trying all that I have to say and I am probably going to get this thread close is this. I can get adb to run I downloaded sdk copied to C installed drivers for my android and nothing happens. I also tried using a memory adapter and formated my sd to fat 32 and then copied DREAIMGRC29 and then tried to run it and nothing happen I am the dummest person in the world.
I don't think this is the phone for you. Just sayin.
elvences said:
Well I am back after reading and trying all that I have to say and I am probably going to get this thread close is this. I can get adb to run I downloaded sdk copied to C installed drivers for my android and nothing happens. I also tried using a memory adapter and formated my sd to fat 32 and then copied DREAIMGRC29 and then tried to run it and nothing happen I am the dummest person in the world.
Click to expand...
Click to collapse
Did you happen to rename/extract the DREAIMGRC29? It needs to be the DREAIMG.NBH. Also "Dumbest" not "Dummest".
elvences said:
Ok let me see if I can explain my problem right. I got an android locked to t-mobile USA I am planning to but an unlock code for this phone but the problem that I encountered before buying the code is this this phone come with an application that when it start up it asks you to to set up your gmail account but I am in mexico I am not interested in having a gmail account how can I delete this application or stop it or skip it otherwise I am not going to be able to use the phone what can I do I like this phone but it is useless in the state that it is help
Click to expand...
Click to collapse
to unlock your g1......... CALL T-MOBILE!
it will be free, so don't go buying into those sites on the net.
also, go HERE
most or all of you modding, hacking, and basic information will be answer by reading that guide.
mrcrs said:
to unlock your g1......... CALL T-MOBILE!
it will be free, so don't go buying into those sites on the net.
also, go HERE
most or all of you modding, hacking, and basic information will be answer by reading that guide.
Click to expand...
Click to collapse
He can't, he is in Mexico.
hamshu said:
He can't, he is in Mexico.
Click to expand...
Click to collapse
he still can call.
and i'll even list the number: 1-800-937-8997.
all they need is the IMEI number, then they give the correct unlock code contingent on that.
and it'll be obvious that he's in mexico and needs his g1 to be unlock, so i'm sure they'll supply that code for him.
granted he's been with tmo for 90 days or more.
nolageek said:
I don't think this is the phone for you. Just sayin.
Click to expand...
Click to collapse
This is a great phone and it is for me aned I going to get to the bottom of this even if I end up bricking my phone.(I can not use it so if I brick it will have the same use)
hamshu said:
Did you happen to rename/extract the DREAIMGRC29? It needs to be the DREAIMG.NBH. Also "Dumbest" not "Dummest".
Click to expand...
Click to collapse
My man well since english is not my first language I apologize for any mistakes in my writing but you still got my point. And yes I did extract the file and its name is DREAIMG.NBH BUT WHEN I TRY TO RUN IT WONT.
mrcrs said:
to unlock your g1......... CALL T-MOBILE!
it will be free, so don't go buying into those sites on the net.
also, go HERE
most or all of you modding, hacking, and basic information will be answer by reading that guide.
I can get the code. The problem is I can type in the code the phone wont let me pass the setting an account.
Click to expand...
Click to collapse
What do you mean? I have a quick question for you though, who is your carrier, and do you have the proper APN set up?
Hi,
I finally managed to import all my messages from my N95 to Hero and here is a tutorial I wrote for the same.
http://vinodmishra.com/2009/09/how-to-import-smss-from-nokia-to-htc-android-devices/
RemoteSojourner said:
Hi,
I finally managed to import all my messages from my N95 to Hero and here is a tutorial I wrote for the same.
http://vinodmishra.com/2009/09/how-to-import-smss-from-nokia-to-htc-android-devices/
Click to expand...
Click to collapse
Has anyone got this to work, i can't get the Date formate changed over to, i copied and pasted the string in the post but it doesn't change it over.
niktheman said:
Has anyone got this to work, i can't get the Date formate changed over to, i copied and pasted the string in the post but it doesn't change it over.
Click to expand...
Click to collapse
Ok got it to work,
okay my converter sux I got it .D if you could post more info to: http://forum.xda-developers.com/showthread.php?p=4385729 your tutorial for Hero could be much more simpler...
and dont forget to give credits plx .D
best regards
I had mentioned your thread as a credit in my blog post. Maybe I will make it bold now . And I know it could be simpler. When I have time I could write a tool to insert the xml generated by Amber Nokia convertor into the SQL Lite databases directly without doing all the hacks i.e. merging a tutorial to convert NOkia->WM and then WM->Android. The WM bit isn't really necessary tbh.
Sorry I just noticed.. I forgot to include the link to your post and only included the modaco ones SOrry for that.. Done it now
iphone to htc hero???
anyone?
Almost there, but a little help needed please
Hi, have followed all the steps and got a saved copy of import.xml.
Next I connected the phone using the USB cable. (Didn't mount it as a USB device)
Then I opened Command Promt on my PC and changed to the android SDK tools directory.
Then I type "adb shell" (without quotes)
It says:
adb server is out of date. killing...
* daemon started successfully *
$
At this point the phone disconnects from HTC Sync and I have to end adb.exe (which appears twice) in windows task manager to get it to reconnect to sync.
Any suggestions please?
If it disconnects from HTC Sync, it's fine as long as you get the shell prompt
RemoteSojourner said:
If it disconnects from HTC Sync, it's fine as long as you get the shell prompt
Click to expand...
Click to collapse
But then if I type "su" after the $ it says su: permission denied...
I assume your phone isn't rooted then.
RemoteSojourner said:
I assume your phone isn't rooted then.
Click to expand...
Click to collapse
Maybe not. To be honest I'm starting to feel a bit out of my depth here. I don't really have any programming knowledge and haven't really used dos much before. I'll go and research 'rooting' now, but if you can come back with a quick instruction in the meantime that'd be great
Ok, so I've found various instruction for how to root my phone. Only problem is that they each seem to relate to what network I'm on. I was originally on T-Mobile, but paid to have it unlocked so I can use my 3 sim. Should I just use the instruction relating to T-Mobile? Sorry for so many questions, but I'm a bit worried about permanently wrecking the phone
RemoteSojourner said:
I assume your phone isn't rooted then.
Click to expand...
Click to collapse
Ok, if I use the instructions here (my ROM version is 2.73.+) http://forum.xda-developers.com/showpost.php?p=4525393&postcount=1 do you think it should be ok? I am a bit worried about the part where it says "flashrec is using an exploit that isn't patched yet in the current kernel used by HTC, however if/when HTC patches this, flashrec will stop working. So for now it's ok but a next version might have patched this, so keep this in mind !"
retroscendence said:
Ok, if I use the instructions here (my ROM version is 2.73.+) http://forum.xda-developers.com/showpost.php?p=4525393&postcount=1 do you think it should be ok? I am a bit worried about the part where it says "flashrec is using an exploit that isn't patched yet in the current kernel used by HTC, however if/when HTC patches this, flashrec will stop working. So for now it's ok but a next version might have patched this, so keep this in mind !"
Click to expand...
Click to collapse
Yup that one should work.
Hurrah! this has been fixed WOO!.
see here.
well done guys, you have made me a happy g2 owner again!!
Hi Everyone,
i figured we might need to clean up the
http://forum.xda-developers.com/showthread.php?t=805024
conversation.
as i see it, there are 2 issues
1. people receive an unlock code, the phone accepts it but then it cannot find any network
2. people receive an unlock code, have troubles entering the code but eventually get it in ok.
please do not post anything "setting" related - apn's, bands etc as this has been tried and shown not to work (yet)
it might be helpful if people who have issue number 1 could post some answers to some questions.
as i am not at all smart enough to work out what we need to know from these people, id appreciate it if those in the know could pm me what they think could be useful, and ill make a template for people to follow
troubleshooting template
----
----
----
----
Current Theories: (please PM me if i have anything wrong here or if i need to add details.)
-------------
Theory #1
Ghul99: the code is accepted, but the phone is still locked?
http://forum.xda-developers.com/show...&postcount=121
------------
interesting information
this seems to support theory #1
1. i unlocked phone - code entered successfully, and i was no longer prompted to enter an unlock code
2. i perm-rooted my phone - all went to plan
3. i put the vision rom on my phone (http://forum.xda-developers.com/showthread.php?t=834450) loaded ok
4. i put a sim in my phone and now i am prompted for an unlock code.
5. i tried to re-enter my code but it would not accept it (it is the same code from step 1)
Nice idea for taking the initiative to clean up the thread which was getting excessilely long!
I'm hoping we can see some progress in a few days as I'm really missing being able to get any cell reception on a MOBILE PHONE!?
Regards.
I will summerize my knowledge later but one thing upfront.
IntuativNipple posted today in IRC that he found the way to get real S-OFF which would also allow SIM-unlock without code.
So there is hope for a solution, but keep your patience.
Sent from my T-Mobile G2 using XDA App
guhl99 said:
I will summerize my knowledge later but one thing upfront.
IntuativNipple posted today in IRC that he found the way to get real S-OFF which would also allow SIM-unlock without code.
So there is hope for a solution, but keep your patience.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
That's really exciting.
Thanks for bring up the good news!
Sent from my T-Mobile G2 using XDA App
guhl99 said:
I will summerize my knowledge later but one thing upfront.
IntuativNipple posted today in IRC that he found the way to get real S-OFF which would also allow SIM-unlock without code.
So there is hope for a solution, but keep your patience.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Just to help guhl and catch up with some unnecessary posts.
Common solutions like Reboot, different sims to try, Hard reset, flash stock ROM or trigger the unlock window to reenter the code doesn't work
Summary of my knowledge so far
For case 1 which was the original problem my theory is the following.
Cause:
Because of problems with the write procedure to the emmc memory the MCCMCN to which the phone is locked did not get cleared but set to an arbitrary value in my case "C3AB".
The CID value is still the same as it used to be (and also in case of a successful unlock would stay the same) which is "T-MOB010". The CID is a 8 character string and the case where all characters are the same (i.e. "11111111") is called Super-CID.
It is of no relevance if you use or used the hardware or software keys, T-Mobile or third party sources. The only reason where it would be your fault is if you pulled the battery!
The unlock-code that we possess (regardless if official or from a different source) is not valid to unlock the phone from this value "C3AB". If one tries again (directly with the modem, using my modified libril.so or a different ROM) the lock counter will increase.
Potential ways to repair this state:
1. Give it back to T-Mobile if you can In my opinion this is a clear warranty case
2. Find someone who has the MegaSIM and the HTC-diag software.
This will definitely work but it is going to be hard to find someone because the SIM is rare and very new.
3. Wait until (or help achieving) the so called "real S-OFF" state of the phone (when also the radio has security disabled) is reached.
When this is achieved one can disable the SIM-lock without any code.
There are still some very good developers after this goal even if for different reasons.
Which information could help us:
1. The output of the following AT-Command sequence from successful and unsuccessful unlocks
Code:
ATE1
ATV1
[email protected]?
[email protected]?AA
[email protected]?40
[email protected]?80
I will try to write a HowTo later for Windows.
For linux see the following posting from the old thread (http://forum.xda-developers.com/showpost.php?p=8750299&postcount=121)
2. The next thing that would help is a logcat from the first unlock process itself.
Howto:
Start the first logcat using the USB-cable and adb before you boot the phone with the foreign SIM.
Code:
adb logcat -b radio > lc_unlock.txt
leave the logcat running and complete the unlock procedure till the phone reboots (the logcat will end automatically)
As soon as the first logcat exits start a new one using:
Code:
adb logcat -b radio > lc_after_unlock.txt
leave it running for 1 minute and then stop it using <Ctrl>-C
3. The next thing that really would help is that you do not post anything in this thread (use the old one instead) that has to do with:
- the APN
- trying another SIM (you would be very lucky if you had one that fits the arbitrary SIMlock)
- reboot, factory reset, use a stock or non stock firmware
- use the hw/sw-keyboard, wait for the right outside temperature or other esoteric procedures
Finally I would like to ask moodecow to edit his original posting and incorporate or link everything that he finds important or helpful in his posting so that it will stay an top.
That is some very exciting news, thank you for the update!
One quick question, when we achieve radio-s off it esssentially would mean everyone could unlock their phones for free?
Thanks.
Sent from my T-Mobile G2 using XDA App
I have 2 ideas, which can help:
1. For people before unlock - maybe performing S-off before unlock will help.\
2. For people after unlock: in bootloader there is "SIMLOCK" option. When you open it, it shows file not found etc. As I think, it can be used to simlock phone for operator, whose numbers are in some file. There is my solution - find what that files are in phone's source code or by any other method, then put them in right place, enter numbers of operator you want to use, open that "SIMLOCK" and lock phone to your network. I don't know if it will work, but it makes some sense.
ms93 said:
I have 2 ideas, which can help:
1. For people before unlock - maybe performing S-off before unlock will help.\
2. For people after unlock: in bootloader there is "SIMLOCK" option. When you open it, it shows file not found etc. As I think, it can be used to simlock phone for operator, whose numbers are in some file. There is my solution - find what that files are in phone's source code or by any other method, then put them in right place, enter numbers of operator you want to use, open that "SIMLOCK" and lock phone to your network. I don't know if it will work, but it makes some sense.
Click to expand...
Click to collapse
Your first idea sounds reasonable and I would support it.
Your second idea is something that is worked on, but you do not only need the correct file (which is actually called DMCID.dat) but there also has to be some "magic number" (like on a gold card) on the micro-sd card.
an important piece of info to carryover from other thread:
1- No APNs are listed
2- if you try to define one, it doesnt save
No APNs being listed is related to the rom more or less, not the issue we're having.
APN is software issue, correct me if I'm wrong so either way it shouldn't pose as an issue to us.
im saying its a symptom that seems to go along with the problem in the title of this thread, so, worth noting.
ie: i think everyone who has the post-unlock no-connection problem, cannot save APNs. all others can.
if you are a counterexample please say so. that would help.
guhl99 said:
For case 1 which was the original problem my theory is the following.
Cause:
Because of problems with the write procedure to the emmc memory the MCCMCN to which the phone is locked did not get cleared but set to an arbitrary value in my case "C3AB".
The CID value is still the same as it used to be (and also in case of a successful unlock would stay the same) which is "T-MOB010". The CID is a 8 character string and the case where all characters are the same (i.e. "11111111") is called Super-CID.
It is of no relevance if you use or used the hardware or software keys, T-Mobile or third party sources. The only reason where it would be your fault is if you pulled the battery!
The unlock-code that we possess (regardless if official or from a different source) is not valid to unlock the phone from this value "C3AB". If one tries again (directly with the modem, using my modified libril.so or a different ROM) the lock counter will increase.
Potential ways to repair this state:
1. Give it back to T-Mobile if you can In my opinion this is a clear warranty case
2. Find someone who has the MegaSIM and the HTC-diag software.
This will definitely work but it is going to be hard to find someone because the SIM is rare and very new.
3. Wait until (or help achieving) the so called "real S-OFF" state of the phone (when also the radio has security disabled) is reached.
When this is achieved one can disable the SIM-lock without any code.
There are still some very good developers after this goal even if for different reasons.
.
Click to expand...
Click to collapse
i have got HTC MEGA SIM and Almost all DIAG files but
T-mobile G2 case =After putting unlock code NO NETWORK cant be solved because when we give s58 clear command it shows SIMLOCK CORRUPTED
i can post the detailed info and pictures if you want it would be a pleasure if could help in any kind of DEVELOPMENT
BTW
if we don t put code in the same version,same country,purchased in the same lot of handsets and use MEGASIM directly without touching anything than it works perfect
kabir_del said:
i have got HTC MEGA SIM and Almost all DIAG files but
T-mobile G2 case =After putting unlock code NO NETWORK cant be solved because when we give s58 clear command it shows SIMLOCK CORRUPTED
i can post the detailed info and pictures if you want it would be a pleasure if could help in any kind of DEVELOPMENT
BTW
if we don t put code in the same version,same country,purchased in the same lot of handsets and use MEGASIM directly without touching anything than it works perfect
Click to expand...
Click to collapse
Posting any further details and/or pictures would be much appreciated!
So if megasim has failed due to corruption I think that the only way to solve our issue is to write directly to emmc partition holding locking information. And I don't now how easy and plausible this is...
I think if we get S-Off for Radio, we'll be able to write to that partition. I hope
andrewklau said:
I think if we get S-Off for Radio, we'll be able to write to that partition. I hope
Click to expand...
Click to collapse
I am a little bit worried about writing this information directly because the partition will be encrypted.
And also copying the complete partition from a working phone or one that is still unlocked will not be an option because the IMEI will also be there and we would not want to overwrite that.
So my hopes are more that there is some kind of a restore procedure from a secure area (I know that Nokia phones can do this, but HTC ?) or that we can lock the phone again with the SIMLOCK option in hboot.
Sent from my T-Mobile G2 using XDA App
well I guess time will tell, does tmobile or htc do replacements (or has anyone tried) for phones no longer on a contract or that are now unlocked?
Sent from my T-Mobile G2 using XDA App
andrewklau said:
Posting any further details and/or pictures would be much appreciated!
Click to expand...
Click to collapse
here we go Pictures first Video coming soon
First Red colour is the error we get on when we try the command
1=clear s58 data
2ND IMAGE is the one when we press the DEVICE INFO
today is sunday not much time will upload the full clear video tommorow and still i have not tried to the all options of the diag maybe it can repair it but sure i will do some more things tomm.
88
I have tried to use my HTC vision G2 as I unlocked it but after that I am unable use as I am unable to find anything which would be hlpful for me as I have the first case problem. I just want to know that would it help me that if someone would flash my HTC Vision G2. I just want to know about that as now I am in Pakistan
Sent from my T-Mobile G2 using XDA App
I bought this phone via craigslist, and it works minus getting connected to my network (tmobile)
i tried rooting it, but when i go into recovery, it says that there is no sdcard/update.zip directory..my sd card is "unavailable" when i check it in the settings.
i factory reseted my phone, and still nothing with the service. any help?
Try going to settings , wireless and network , mobile networks , network operators and click search now . It might take a few searches but it will eventually register to the network .
I tried that as well, it gives me some error with my sim card.
but my sim card works in every other phone, just not this one
I've lost all hope in society. Man, people knowingly sell things with problems. What makes someone think it is morally okay to rip off another person. Why be a morally corrupt individual?
I hope your phone is fixable, seems like the person sold it to you knowing there was a problem.
Try using odin to go back to stock JFD, see if that helps. Just make sure you can get into download mode with the 3 buttons with no problems
I'll try that, any other ideas..?Thanks btw
I noticed that odin is only for windows, while I'm on a mac..
how do i go about doing this on a mac then? i was thinking restoring a stock rom might help..
You can use Heimdall as an alternative to Odin. It runs on Macs and linux boxes.
Here is the thread that contains the DL Link and info about the program. I have personally never used it, but have read that it's fairly simple. I also recall a member from xda making a video tutorial that he posted on youtube.
EDIT: Here is the original thread from the I9000 forum.
If you have any questions it would probably be better to post there.
I believe the developer checks that thread far more frequently than the one here in the Vibrant forum.
Thank you so much, I'll try to fiddle with this.
I can't seem to locate a stock rom anywhere, the mirrors that I found on this website (the bible thread) the links were dead
Well hell that sucks.
I've got it. I'm zipping it up right now and I'll start uploading ASAP.
I'll post back when it's ready for you.
Awesome,thanks!
Here you go, man. Samsung T959UVJFD True Stock Firmware
After you download the archive. Unzip it and there will be a two files inside, 'T959UVJFD.tar' and 's1_odin_20100512.pit'.
I tried this, but I still get the error that my sim card does not allow connections to this network
any idea what could be wrong..? i sure hope i didn't lose $280 dollars...
Perhaps the phone was locked to a different carrier? I remember when I first got my Vibrant and was reading about rooting, I also saw information that switching networks between AT&T and T-mo was *extremely* easy. I thought I remembered seeing information at one point regarding the codes for each carrier (so you could lock back to t-mobile), but I can't find it now.
Here's the post on unlocking your phone though:
http://forum.xda-developers.com/showthread.php?t=761045
thanks so much! this might be my problem!
i downloaded the SGS_Unlock.apk, but when i opened it,it said there was no codes and asked me if i was sure that i was using a samsung galaxy s?
Edit:i'm using a mac, and i'm trying to use the mac software for the unlocking, but when i run the software it tells me this
strings: can't open file: ./nv_data.bin (No such file or directory)
strings: can't open file: ./nv_data.bin (No such file or directory)
Your code is:
I get a blank.?
Is there anyway you can contact the person you bought the phone from and ask them what network they were using the phone on? Or even ask them what exactly they have done to the phone?
They haven't been answering...****ing assholes
Are you rooted? I think that you need su permission to see the path that nv_data.bin is in.
Also, if you go to Settings > Wireless and Network > Mobile Networks > Access Point Names, what do you see there?
i am not rooted, i will root my phone tonight
Are you still having the "SD card unavailable" issue after flashing back to stock firmware?
When you are ready to root use this.
Hey guys,
First and foremost, I would like to say I have no idea about anything, and everything on this website is in a foreign language to me (can't understand anything), so please bear with me. I set up a new thread because after reading everything, I still don't get anything (being a noob).
I just signed up with vodaphone in australia to get a HTC Legend (my first android and smart phone after using n73 for the last 3years). Everything is going fine until I wanted to get apps from the android market. I didnt have a gmail account, so I signed up for one through my computer. However, when i tried signing in through the phone google account set-up wizard, after waiting 5mins for the phone to communicate with google servers, it fails and the phone would not let me, citing that it cant establish a reliable data connection to the server, being a temporary problem (Tried it with both 3G and wi-fi, also with 2 other friend's log-in). Any help on this would be good. Also, with HTC sync 3.0, I was unable to sync and backup all my sms for a factory reset. Is there any other ways to do this without the apps? Additionally, I cannot update my software to Froyo (Firmware 2.2) FOTA or finding a download for it onto my comp as the phone says my software is up-to-date (But HTC Australia shows that there is an update for Software 2.2 FOTA).
Alright, I know what goes through your mind, get the apps to do that, but without the sign-up for gmail settings, I cant access Market, cant download apps, basically cant do anything (and mind you, I dont know about programming or xda or anything of that sort to check the shell script or whatever that goes on in the forum).
I've went around looking for answers but never really got a definition, mostly about how-to's which I am not interested as I have no idea what they are.
What is flashing?
What is rooting?
What is un-branded or Vodaphone branded (in my case, if it makes sense)?
What is a goldcard and what's it for?
Is RUU or custom rom or rom the same thing? does that have to do with my firmware? and what is it?
What's with downgrading and upgrading for other stuff (to versions 1.1/1.3)?
What is Clockwork and Fastmode and all those other stuff?
What's the latest firmware/software for Legend (2.2 or 3.0) as I have read threads with firmware 1.3 or 3.3 (or something of that sort)?
I know I AM the biggest noob you guys will ever find. Seriously, no websites actually explain all these stuff, and I'm getting paranoid over using an android phone. I know you guys might just tell me to get a simpler phone, but I upgraded to an android to know more about it.
Thanks in advance guys, if any help can be provided. I have a cool phone, but I wanna use it fully.
Regards,
William
Firmware version
2.1-update1
Baseband version
47.39.35.09U_7.08.35.21
Kernel version
2.6.29-8d705e0d
[email protected] #1
Build number
2.10.178.1 CL211993 release key
Software number
2.10.178.1
Browser version
Webkit 3.1
http://lifehacker.com/5717356/set-u...tm_campaign=Feed:+lifehacker/full+(Lifehacker)
^ To know more about your Android.
Try various Wi-fi settings till you get proper Wi-Fi signal.
http://zubu.ca/legend/fota_check.php shows that there is no update available for your build, I suggest you debrand.
I just helped about with the basics, the more experienced people will be able to answer you better. Did you get a black Legend?
hey man, thanks for that. mightily helpful.
however, wat do u mean by various settings for wifi? there arent much to set.
also, what do u mean by debranding as well? like not go vodaphone or smtg like dat?
btw, i have a silver Legend i think? the metallic case.
marder101 said:
Hey guys,
First and foremost, I would like to say I have no idea about anything, and everything on this website is in a foreign language to me (can't understand anything), so please bear with me. I set up a new thread because after reading everything, I still don't get anything (being a noob).
Click to expand...
Click to collapse
Be prepared to learn, and to become less of a noob
marder101 said:
I just signed up with vodaphone in australia to get a HTC Legend (my first android and smart phone after using n73 for the last 3years). Everything is going fine until I wanted to get apps from the android market. I didnt have a gmail account, so I signed up for one through my computer. However, when i tried signing in through the phone google account set-up wizard, after waiting 5mins for the phone to communicate with google servers, it fails and the phone would not let me, citing that it cant establish a reliable data connection to the server, being a temporary problem (Tried it with both 3G and wi-fi, also with 2 other friend's log-in). Any help on this would be good.
Click to expand...
Click to collapse
Hmm, I got that once before. If there's a different wifi network that you can get access to, try that.
marder101 said:
Also, with HTC sync 3.0, I was unable to sync and backup all my sms for a factory reset. Is there any other ways to do this without the apps?
Click to expand...
Click to collapse
There are apps on the market, if you can sort the issue above then check those out.
marder101 said:
Additionally, I cannot update my software to Froyo (Firmware 2.2) FOTA or finding a download for it onto my comp as the phone says my software is up-to-date (But HTC Australia shows that there is an update for Software 2.2 FOTA).
Click to expand...
Click to collapse
Yes, some users still haven't received the update. A debrand will help
marder101 said:
Alright, I know what goes through your mind, get the apps to do that, but without the sign-up for gmail settings, I cant access Market, cant download apps, basically cant do anything (and mind you, I dont know about programming or xda or anything of that sort to check the shell script or whatever that goes on in the forum).
Click to expand...
Click to collapse
You are correct, I have said about apps. If you temproot using visionary you can install Titanium backup which can backup everything. Both of these are available for "sideloading". Without a file manager on your phone I can't think of an easy way to install them. What I'd do is go to the settings, make sure USB debuging is on (Settings --> applications --> development) and then use adb to install it:
Code:
adb devices
adb install Visionary.apk
adb install Titanium-Backup.apk
This is assuming that you rename the files to Visionary and Titanium-Backup, and have them in the same directory as ADB. For an easy installation of ADB do this:
Download this file and unzip it to C:\Android\ADB\
Open cmd (start orb/button, type "cmd" and hit enter)
In cmd do this:
Code:
cd C:\Android\ADB
Now you can use the adb command listed above. If you have the apk files in the same folder you can pretty much copy-paste those commands
marder101 said:
I've went around looking for answers but never really got a definition, mostly about how-to's which I am not interested as I have no idea what they are.
What is flashing?
What is rooting?
What is un-branded or Vodaphone branded (in my case, if it makes sense)?
What is a goldcard and what's it for?
Is RUU or custom rom or rom the same thing? does that have to do with my firmware? and what is it?
What's with downgrading and upgrading for other stuff (to versions 1.1/1.3)?
What is Clockwork and Fastmode and all those other stuff?
What's the latest firmware/software for Legend (2.2 or 3.0) as I have read threads with firmware 1.3 or 3.3 (or something of that sort)?
Click to expand...
Click to collapse
Flashing is the process of writing a new operating system to NAND (internal) memory, otherwise known as flash memory
Rooting is like gaining administrator rights on a Windows PC. On Unix-like systems (Android, Linux, OSX) this is known as the root account, hence "rooting"
Vodafone branded means that Vodafone has it's logos and apps on there. Think of the ROM on your phone as a custom ROM, made by Vodafone. You need to wait for Vodafone to update it. Un-branded simply mean that all of that is gone, it's like having the ROM that HTC meant for it. So we only need to wait for HTC to update it
A goldcard is an SD card that has been specially prepared for making the phone think it's CID is different. I don't fully understand how it works, all we need to know is that it does, and that we need one for rooting
ROM and firmware are the same thing RUU is "ROM Upgrade Utility". It's a method made by HTC for upgrading the phones firmware. A custom ROM is simply a ROM that's been customised. It may be based on the official ROM from HTC, or the open source version of Android
ClockworkMOD is an open source recovery image. It allows us to do full backups of the NAND memory (nandroid backup), as well as easily installing new ROMs/updates. These come in zip files Fastboot is a way to test stuff quickly. It allows you to flash certain parts of a ROM without the need to flash the whole thing, as well as boot from a kernel that isn't flahed to the device. It's a dev thing
The latest version of Android for the Legend (officially) is 2.2. HTC firmwares follow a different numbering scheme. HTC ROMs v. 1.x and 2.x are based on Android 2.1, and v. 3.x is based on 2.2
marder101 said:
I know I AM the biggest noob you guys will ever find. Seriously, no websites actually explain all these stuff, and I'm getting paranoid over using an android phone. I know you guys might just tell me to get a simpler phone, but I upgraded to an android to know more about it.
Click to expand...
Click to collapse
Get learnin'
I hope this helps
@GrammarFreak:
Thanks for your post! Even though I thought I kinda understood most things, this cleared a lot up for me!
RMWessels
No worries
ishan_rulz said:
http://lifehacker.com/5717356/set-u...tm_campaign=Feed:+lifehacker/full+(Lifehacker)
^ To know more about your Android.
Try various Wi-fi settings till you get proper Wi-Fi signal.
http://zubu.ca/legend/fota_check.php shows that there is no update available for your build, I suggest you debrand.
I just helped about with the basics, the more experienced people will be able to answer you better. Did you get a black Legend?
Click to expand...
Click to collapse
Hello her last day i got a new legend and it was black and it looks like my old htc hero