Has anyone used Powercheck before? I have a question regarding the "LCD off" function, which has the potential to be quite a handy tool:
How do I switch the screen back on again without using the power button? It allows you to assign a two-button press configuration to the action, but only gives the available options of "Button 1-5". Which button is which!?
Thanks,
Rich
all the
screen toggle programs i've used react to
all buttons and screen preasure to turn on the screen once more
Doesn't work with this one unfortunately.
Thanks anyway.
what about pressing contacts button ?
that sure works with the one i'm using now
Tried everything to no avail.
I'll probably go and look for another app. Any ideas? I want to be able display battery, storage and memory levels on the display screen as well.
pocket plus v2 does all of that i believe
but some people say it cause them problems on their xda2
others say it dont
Nice one, thanks Rudegar.
i managed to figure out that button 1 is the calender button (right side of earpiece), and button two is the contacts button (left side). all good. thanks again Rudegar.
The Wizard has the option, when it is in...ummm...standby(?) mode (i.e., when you push the power button), to only return to normal mode when you press the power button. In other words, the other hardware buttons, let alone the touchscreen, do nothing.
What I'm interested in is a way of doing something similar, but when I'm using it as an MP3 player. The various Wizard cases I've tried are all too snug, so putting the Wizard back in the case after starting up the MP3 player bumps buttons or the screen and causes problems (e.g., stops the music).
Are there any tricks to restricting input for cases like this? Ideally, from my standpoint, the device would accept user input when either the middle button of the D-pad is pushed, or if a call comes in (so the call can be accepted).
Thanks!
You can try using the WM5 Today's lock device plugin. There are various other software that utilize (similate) this lock feature. Do a search.
hanmin said:
You can try using the WM5 Today's lock device plugin. There are various other software that utilize (similate) this lock feature. Do a search.
Click to expand...
Click to collapse
Hanmin, I do exactly as you suggested but I wonder if is there a more efficient way to lock the device especially with media player on top. I use the Treo case which actually has a hole for the headphone jack in the proper location for the k-jam, however, one has to thread the headphone through the case, start one's music, bring up the today screen, and then lock the device. If one could have the option of placing lock the device on the start menu as opposed to having it only on the today's screen that to me may be a big help, and then as you come out of unlocking the device, you would be right there at the media player.
What I'm afraid of is one time while I'm fidgeting to get the device into the case and coordinate the starting/locking of music, I'll drop the device on the NYC subway platform and watch it dash on to the tracks as a subway is on coming :roll:
Try deltaLock I use it together with WMP10 and wired/bt headsets.
Would it help if you could map the device lock to a button?
Armstrom has made a great program for that:
http://www.mr2-power.com/downloads/DeviceLock.CAB
You don't have to go back to the today screen at all, just press the button you mapped it to.
you can also assign a button to sreen on/off in Windows Mediaplayer itself! Then you can use the d-pad buttons (that's what you wanted not?) to adjust volume and select next and previous, however you screen is blacked out, so the touchscreen will not work and power consumption drops. Ideal for use as MP3 player.
WM Player > Menu > Options > Buttons > Screen on/off, > assign e.g. the middle button.
1-2tje said:
WM Player > Menu > Options > Buttons > Screen on/off, > assign e.g. the middle button.
Click to expand...
Click to collapse
There is a bug in WMP10 on WM5 that prevents this from being assigned to buttons other than dpad though correct? Anyone have a fix for this yet? I like having up/down for volume, right/left for track, and middle button for play/pause.
device lock works without any problems
SBouri said:
device lock works without any problems
Click to expand...
Click to collapse
Yeah but... that means the button will always be a lock. What I used to do on previous pocketpc was have a button that launched WMP. Once WMP is running, that button now becomes the screen lock.
Itesla, you can still have your up down left right and enter dpad control, as you can assign two functions to each button. A press and a press and hold (except the middle button). When it asks you to press a button, just hold up or down (left and right hold are assigned to rewind and fast forward). I have down hold set to fullscreen and up hold set to the lock.
Alternitavely, you could use the press up down for a button lock, and just use the volume slider
Hope this helps
PS I'm posting this on my wizard from the comfort of my bed :lol: Ahh the glories of Wifi... I'm just a bit overhappy because I've finally got it working.
1-2tje said:
you can also assign a button to sreen on/off in Windows Mediaplayer itself! Then you can use the d-pad buttons (that's what you wanted not?) to adjust volume and select next and previous, however you screen is blacked out, so the touchscreen will not work and power consumption drops. Ideal for use as MP3 player.
WM Player > Menu > Options > Buttons > Screen on/off, > assign e.g. the middle button.
Click to expand...
Click to collapse
Thanks 1-2tje, your suggestion was dead on. Eb
I'd like to be able to hold a button (other than Button 5) and have it execute a command/program. Can it be done?
ie. Hold OK button to launch X program? I've googled with no luck.
Search the forums. There is a thread by Sleuth255 (?) with the title PTT Function Hacked or something similar.
I found that thread. But it's doing what my TyTN does anyways... allows you to hold the button 5 and launch. I need that function for the other buttons as well.... unless I'm missing something.
i use ae button plus for this.
its free on a trial with a popup on phone phone startup, or $7 to unlock.
its FANTASTIC. interface isn't overly intuative to setup, but basicly you can have
1 click, 2 click, 3 clicks and press to hold on *all* the hardware buttons do different things.
its also got a reasonalbe app switcher built in, and way to turn the screen off and lock the keys if you want your media to keep playing when the phone in in a lower power state. *(not sure how much this saves in terms of power, but the key lock is why i use it)
For example,
my internet button (up and right of screen) is now set to
1 click - Load IE,
2 click - Load MusicID (listens to any song being played and then tells you the artist and track)
3 click - Load tomtom (usfull so i can switch between messages/phone calls and tomtom when driving quickly.
press and hold - turn off screen and lock keys for media playback.
Wish it was more popular i think its a fantastic application! you should give it ago.
as an aside note, i think there is a reg hack to do the press and hold on other buttons, but honestly do your self a favour and try
http://ae.inc.ru/aebplus.php
(website looks Naff!!! but good app)
Thank you. Exactly what I need. Cheers.
Is there any way to do this because say if im listening to a song and i want to change it i always gotta turn on the screen in order to do so when i really dont need to.
any help would be greatly appreciated
Plug in your headphones
that doesnt work - it makes no differnece to the buttons
There's a way to modify that radio button on the stock headphone piece to do one command. It can be stop, forward, back, or whatever.
Can you please be more specific on how to change track using the button on the headset? also having the problem where screen turns on everytime I change track. GSplayer has this feature, but I prefer WMP
i dont use the original headphones - there must be a reg edit or something to allow the use of buttons with the screen off?
comeradealexi said:
Is there any way to do this because say if im listening to a song and i want to change it i always gotta turn on the screen in order to do so when i really dont need to.
any help would be greatly appreciated
Click to expand...
Click to collapse
the easiest thing you can do is change the button config within WMP.
- Open WMP
- Go to view the player (not the library) by either playing a song or by hitting OK
- Hit Menu > Options > Buttons
- Scroll all the way down and select "Toggle Screen"
Now this is where you have to decide what button you want to use to turn the screen on and off, personally, I picked the center button (the optical joystick button) as my on and off screen, which is currently the Play/Pause button. For these instructions, I will use that button as the example.
- Hit the "Assing" button and hit the middle (optical joystick) button.
- Hit OK
Now you can turn the screen on/off (by hitting that button) while still being able to increase/decrease the player's volume, change tracks back or forward, and if you do a long press then you can fast forward or rewind the track.
Hope this is what you were looking for...
Hope this helps
solarleox said:
the easiest thing you can do is change the button config within WMP.
- Open WMP
- Go to view the player (not the library) by either playing a song or by hitting OK
- Hit Menu > Options > Buttons
- Scroll all the way down and select "Toggle Screen"
Now this is where you have to decide what button you want to use to turn the screen on and off, personally, I picked the center button (the optical joystick button) as my on and off screen, which is currently the Play/Pause button. For these instructions, I will use that button as the example.
- Hit the "Assing" button and hit the middle (optical joystick) button.
- Hit OK
Now you can turn the screen on/off (by hitting that button) while still being able to increase/decrease the player's volume, change tracks back or forward, and if you do a long press then you can fast forward or rewind the track.
Hope this is what you were looking for...
Hope this helps
Click to expand...
Click to collapse
awesome - thanks mate!
Hello everyone, I'm sure many people will be interested to know that AE Button Plus is working perfectly with LEO and support english, french (which I use), spanish, deutsch and ten other languages. BTW, this is my first post, so every comments are welcome
The HD2 may be a touch device, it still has 7 buttons and I use them for variaty of functions, including switching on/off BLUETOOTH, WIFI or TORCH. You can even assign any button to run an application. The program is VERY stable and VERY convenient.
This exceptional app has the ability to reassign function to (almost) every physical button of your device, including the volume button. Moreover, it has the ability to assign different functions whether you press the button ONCE, TWICE or LONG PRESS. It very simple to use and work wonderfully with my HTC HD2 (as wall as many other Windows Mobile Device). I've used it for more than a week and I can't report any bug, even though I installed many other apps, tweak and so on.
I'm using the evaluation version (you have pay 7.99$) by the fact that it shows a splash screen when device starts up. But you can believe I will pay the damn Russian guy who created the app, many even donate more!!!
I wanted to share my experience with using this app, since it's not very known in this (great) HD2 forum. Also, I want to show you the way I've been remapping the buttons, to show how useful it can get. Feel free to comment!!! Once you install the program, softreset and assign the AEBPlus to a shortcut and you're ready to rock! By the way, the icon is quite ugly, but that's just a minor issue .
THIS IS THE WAY I REMAPPED HD2 BUTTONS (in brackets, the way AEPlus "calls" the button)
Volume up.
Single press: volume up
Long press Backlight up
Volume down.
Single press: volume down
Long press Backlight down
Hang up (green phone button)
Single press: switch vibration mode on/off (and shut down the volume)
Double press: switch torch on/off (run application "TorchButton v2.3")
Home button (button #00ED), added manually
Single press: unchanged, impossible to remap ??
Double press: switch bluetooth on/off (impossible to make it different than the "Home button"...)
Long press: impossible to remap ??
Windows button (windows key)
Single press: ok/close (close the window, but not the program still runs)
Double press: windows file explorer (you can choose to run another explorer, for example Total Commander)
Long press: close active application ("really" close the application)
Return button (also button #00ED, added manually, see ISSUE below)
Single press: unchanged (actually I chose no action, but the original function remains)
Double press: switch bluetooth on/off
Long press: switch wifi on/off
Power button (red phone button)
Single press: unchanged (shuts down backlight)
Double press: unchanged
Long press: unchanged (actually, I use it with "Touch X LEO Power 12 icons actionscreen v1.1")
KNOWN ISSUES AND SOLUTIONS
- Absolutely no bug !
- Bluetooth. The function included with this program doesn't work (apparently because HD2 uses Widcomm bluetooth, unlike its predecessors). To solve this, I simply assign the desired button with the application "ToggleBTh.exe" (credit to Dextrosan http://forum.xda-developers.com/showthread.php?t=587493). I copied the file to the folder "Program Files" and created a shortcut in the "windows/start menu/programs" to be able to make it appear in the program list.
- Backlight level. To adjust the backlight, you have to access the settings of the program. Click options -> backlight settings (scroll down !). There you can adjust the darkest level you wish (0 = minimum backlight) and the brightest level (10 = 100% = maximum backlight , less if you want to save battery life) and backlight step (2 = 20% is fine with me). Beware, when you assign a button with function backlight level, you have to choose in the subsequent menu if you want "backlight down", "backlight up" or even "backlight level" 0, 2 (= 20%), 4 (= 40%) and so on.
- Manually add Home button. Home button is not listed in the program, so you have to add it manually. Choose "File -> Add button" and follow instructions. Actually, there's a trick... If you press the Home button, it will close the window and go back to your home page. You'll have to go back in the program using the task manager.
- Home and Return button cannot be remapped individual. For some reason, when you manually add Home button, it's called #00ED and when you assign actions, these actions also work with the Return button... Actually, these actions even work BETTER on Return button than Home button. Single press and Long press actions will not work with Home button, but they work with Return button. Weird, huh? Even if you manually add Home button (then called #405C) and assign actions for the button, it won't work at all, and the Return will still execute actions listed with the button #00ED. All in all, it's a minor issue. Just remember that I can't remap single or long press for teh Home Button.
EDIT: Dec, 20 I also use the function "control volume directly" so that the volume buttons control SYSTEM volume directly and not the ring volume. Also, this nice function disable the ugly pop-up volume window that appears and have the annoying tendency to change ring volume first !!! This function is located in the menu "Options -> Other options -> Control volume directly". You can check or uncheck it.
That all folks, hope this little work will be useful for many.
Much help is appreciated to try to solve the Home/Return button issue.
SIGNATURE
- Device: HTC HD2 codemane "Leo"
- Rom: 1.48.406.1 (7 1294) FRE
- Manila: 2.5.192 116 19.0
- Radio: 2.05.51.05_2
INSTALLED SOFTWARES & TWEAKS
- Net 3.7 Compact Framework
- AE Button Plus 2.6.6.1
- BsB Tweaks v1.5
- TorchButton v2.3 (use your flashlight as torch, SOS etc...)
- Total Commander 2.51
- WMLongLife-0.60.205 (fine connexion manager)
- Touch X LEO Power 12 icons actionscreen v1.1
is their a way to config the take picture on screen button a hardware button
DAMIEN123_666 said:
is their a way to config the take picture on screen button a hardware button
Click to expand...
Click to collapse
Of course, as long as you find an exe which does that automatically whenever invoked. You can do pretty much anything as long as you can associate it with a specific utility. I use the program with my ipaq 210 and am very pleased with it, with a resistive screen it's even more useful.
Now, if only I wasn't dead-dumb enough to let slip from my hands this leo for 430EU on ebay... who knows how long will I have to wait to find another one at that price.
theemed said:
Of course, as long as you find an exe which does that automatically whenever invoked. You can do pretty much anything as long as you can associate it with a specific utility. I use the program with my ipaq 210 and am very pleased with it, with a resistive screen it's even more useful.
Now, if only I wasn't dead-dumb enough to let slip from my hands this leo for 430EU on ebay... who knows how long will I have to wait to find another one at that price.
Click to expand...
Click to collapse
ok ive can boot the camera app but cant take picture, any ideas
I'm using this program also for a while.
I'm used to use the power/hangup red button to go back to the today screen but can't find a way to get that working.
It takes me a while to figure out the working posibilities but it's useful anyway.
Great post! Thanks for sharing with us.
Disable the volume window !
I also use the function "control volume directly" so that the volume buttons control SYSTEM volume directly and not the ring volume. Also, this nice function disable the ugly pop-up volume window that appears and have the annoying tendency to change ring volume first !!! This function is located in the menu "Options -> Other options -> Control volume directly". You can check or uncheck it.
Thx for all.
It works very well
DAMIEN123_666 said:
ok ive can boot the camera app but cant take picture, any ideas
Click to expand...
Click to collapse
uhm, sorry no idea you still need to associate that hardware buttom combo through AE with an executable file which takes the shot, it's up to you to find a exe trigger for that
rzasharp said:
Hello everyone, I'm sure many people will be interested to know that AE Button Plus is working perfectly with LEO and support english, french (which I use), spanish, deutsch and ten other languages. BTW, this is my first post, so every comments are welcome
...
Click to expand...
Click to collapse
can you share you aebutton config file? i don't install it, i just copy it from my old device (eten) but there not enough default buttons
rzasharp said:
Hello everyone, I'm sure many people will be interested to know that AE Button Plus is working perfectly with LEO and support english, french (which I use), spanish, deutsch and ten other languages. BTW, this is my first post, so every comments are welcome
...
Click to expand...
Click to collapse
your first post is excellent. this realy helped me.
i've almost forgot about aebutton on my used blackstone. hd has no true hard keys. now i have a leo and aebutton came back with me. i can confirm that aebutton works perfectly on my leo. even more than i need.
rzasharp said:
...
- Bluetooth. The function included with this program doesn't work (apparently because HD2 uses Widcomm bluetooth, unlike its predecessors). To solve this, I simply assign the desired button with the application "ToggleBTh.exe" (credit to Dextrosan http://forum.xda-developers.com/showthread.php?t=587493). I copied the file to the folder "Program Files" and created a shortcut in the "windows/start menu/programs" to be able to make it appear in the program list.
...
Click to expand...
Click to collapse
if you already have Touch X LEO Power 12 icons actionscreen then no need for you to use togglebth. touch x leo power 12 icons have wifi and bluetooth toggles working well on leo.
rzasharp said:
- Home and Return button cannot be remapped individual. For some reason, when you manually add Home button, it's called #00ED and when you assign actions, these actions also work with the Return button... Actually, these actions even work BETTER on Return button than Home button. Single press and Long press actions will not work with Home button, but they work with Return button. Weird, huh? Even if you manually add Home button (then called #405C) and assign actions for the button, it won't work at all, and the Return will still execute actions listed with the button #00ED. All in all, it's a minor issue. Just remember that I can't remap single or long press for teh Home Button.
...
Much help is appreciated to try to solve the Home/Return button issue.[/B]
...
Click to expand...
Click to collapse
ok. so we have something special on our leos.
- htc sense.
- green button - send key.
- red button - end key.
- home button. this key is stucked with htc sense.
- back button.
1. green button.
i can do any thing with this key. but i leave long press unchanged beacause my vangrieg_incall_lock_ita had added long_send.lnk that link to phone on my \windows and i don't want to interfere into it. now long press on send key = phone. this is a vital function, right? so let it be.
2. red button.
i can't do any thing, but "Touch X LEO Power 12 icons actionscreen" can.
so for me end key has single press as normal and long press by "Touch X LEO Power 12 icons actionscreen". that is more than enough. power off is a vital function also.
3. home button.
as said, this key is stucked with htc sense. so you can not change single press anyway. you can do somethings with double, triple and even long press but firstly it takes you to home screen then do your commands. for long press see next item.
4. back button.
this is exactly "ok key" on aebutton. you even don't need to add it manually. you can do everything with this key except long press. long press works only when you are on a certain program interface. this does not work when you are on htc sence interface. to get this long press work on anything, anywhere and anytime you have to assign the same action you want to do to HOME KEY LONG PRESS. and voilà !!! this works 4u.
Thanks for your appreciation of my thread.
Still, If you are really "hardcore hardware fan" you can use AEBPlus to assign even the double tap and triple tap of the keys
To oainot. About the bluetooth toggle, If find it quicker and simpler, to double tap on one button, turn on my headphones and get going out in the snow. I use it literally everytime If get out of my apartment. Just think: would you prefer to switch the light off your apartment with a long-click (+ click in a menu) or with a simple double-click? Just a matter of taste I guess. The best is to have to choice!
To satoo. Here's my configuration file. I should tell you that my system is in french. I managed to put "english" as language in the program, but you can still get some french word (calculatrice = calculator i think; Explorateur de fichiers = file explorer; ). See attached file.
Merry Christmas!
oainot said:
if you already have Touch X LEO Power 12 icons actionscreen then no need for you to use togglebth. touch x leo power 12 icons have wifi and bluetooth toggles working well on leo.
Click to expand...
Click to collapse
I am in entire agreement with you.
one key like hold red key ,we can switcher wifi on/off, bt on/off.
So，in an identical manner，
I set one key (ex:hold vol up) to active phoneweaver ,with which i set some usefull profiles :
mute mode: switch vibration mode
day mode: loudly volume
night mode: max or min backlight level as you like
.......
each mode we can define (backlight level,vol lvl,differents rings,wifi on/off,bt on off)
here is phoneweaver 2.0 with XXXX，sorry for my english
oainot said:
your first post is excellent. this realy helped me.
Click to expand...
Click to collapse
same from me
oainot said:
2. red button.
i can't do any thing, but "Touch X LEO Power 12 icons actionscreen" can.
so for me end key has single press as normal and long press by "Touch X LEO Power 12 icons actionscreen". that is more than enough. power off is a vital function also.
Click to expand...
Click to collapse
i would like to switch the action of the red button the other way round.
i would like long press red button to lock the phone and turn off backlight and single press red button to launch the Touch X Power 12 icons actionscreen. I cant seem to achieve this does anyone have any ideas?
rzasharp said:
Thanks for your appreciation of my thread.
Still, If you are really "hardcore hardware fan" you can use AEBPlus to assign even the double tap and triple tap of the keys
To oainot. About the bluetooth toggle, If find it quicker and simpler, to double tap on one button, turn on my headphones and get going out in the snow. I use it literally everytime If get out of my apartment. Just think: would you prefer to switch the light off your apartment with a long-click (+ click in a menu) or with a simple double-click? Just a matter of taste I guess. The best is to have to choice!
...
Merry Christmas!
Click to expand...
Click to collapse
ok. i've get it. you are absolutely right.
Audio Oblivion said:
same from me
i would like to switch the action of the red button the other way round.
i would like long press red button to lock the phone and turn off backlight and single press red button to launch the Touch X Power 12 icons actionscreen. I cant seem to achieve this does anyone have any ideas?
Click to expand...
Click to collapse
i'm afraid it is not possible.
single press of red key may controled by basic input output system, not the operating system (windows mobile), not the htc sense or not any other resident program.
may be this should be that for power on the phone by single press while operating system is still not running.
may be someone could hack the key someway. i dunno. if aebutton had a button assume called "power key", it could be possible to try.
Assign Softkeys Functions
I changed the setting to reassign functions of softkeys. AE Button shows the setting properly, but it does not work.
any suggestion?
thanks
msrox said:
I changed the setting to reassign functions of softkeys. AE Button shows the setting properly, but it does not work.
any suggestion?
thanks
Click to expand...
Click to collapse
yeah.
i forgot softkeys is not controled by aebutton.
I want to remap left softkey (single click) to HTC Message.
But when I do it the left softkey is still "phone" and the caption is not changed!
msrox said:
I want to remap left softkey (single click) to HTC Message.
But when I do it the left softkey is still "phone" and the caption is not changed!
Click to expand...
Click to collapse
Yes, I noticed that the left softkey cannot be remapped by AEB. You'll have to use the newer BsBTweak which works just fine with the left softkey. Find it here
msrox said:
I want to remap left softkey (single click) to HTC Message.
But when I do it the left softkey is still "phone" and the caption is not changed!
Click to expand...
Click to collapse
this feature is for devices with physical soft keys. Leo doesn't have them. search the forums for softkey remapper (Today and/or Manila).