Hi all,
During I was flashing from ROM 1.48 to my 1st cooked ROM (PIMOOS57_21887_Manila 2.5.1921.16.19.0,-Build 21887) HD2 lost USB connection when process was at 73%.
Since I systematically get a triangle crossed by a ! at startup and can't do anything!
I've tried a hard reset but unsuccessfully.
Can someone help me please?
Regards
Serge35 said:
Hi all,
During I was flashing from ROM 1.48 to my 1st cooked ROM (PIMOOS57_21887_Manila 2.5.1921.16.19.0,-Build 21887) HD2 lost USB connection when process was at 73%.
Since I systematically get a triangle crossed by a ! at startup and can't do anything!
I've tried a hard reset but unsuccessfully.
Can someone help me please?
Regards
Click to expand...
Click to collapse
plug your Leo to your PC (USB).
start your Leo with volume down
when 3 colors appear reflash the rom from pc
Serge35 said:
Hi all,
During I was flashing from ROM 1.48 to my 1st cooked ROM (PIMOOS57_21887_Manila 2.5.1921.16.19.0,-Build 21887) HD2 lost USB connection when process was at 73%.
Since I systematically get a triangle crossed by a ! at startup and can't do anything!
I've tried a hard reset but unsuccessfully.
Can someone help me please?
Regards
Click to expand...
Click to collapse
Had u HardSPLed your HD2 before flashing cooked ROM?
Had you tried to enter bootloader mode (tri-color mode) and flash the official ROM yet?
Thank you very much Steeve0007 for your quick answer.
I had conserved the GoldCard I used to update from Operator ROM to 1.48
I used it and 1.48 has been successfully restored.
Nevertheless I keep your solution.
Thx a lot again
vichet007 said:
Had u HardSPLed your HD2 before flashing cooked ROM?
Had you tried to enter bootloader mode (tri-color mode) and flash the official ROM yet?
Click to expand...
Click to collapse
Hello,
yes I HardSPLed it successfully few days ago.
I think my pb was due to USB connection lost between PC and HD2.
Thx for your help
Related
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
i have the t-mobile mda compact iii and is stoped working because i flashed it with a bad rom. it will not turn on go to bootlaod or charge i mean its dead can some one plzz help me to get my phone to work again plz
1- did u use the uspl uytility? i think no
2- was the rom official or cooked?
3-what was ur os?
at the end the ultimate solution as i can see is to try sd flashing method! try using official rom with this method!
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
best wishes
hello!
it seams, i've the same problem, but the device is doing nothing. i can't start bootloader mode by pressing the button on the upper left side und the reset button :-(
it was a cooked rom
i uspl it before flashing the rom to my device by the way thankx for the reply. i'm going to try it and see if it will even charge ,turn on or go to bootloader
--------------------------------------------------------------------------------
it was a cooked rom
i uspl it before flashing the rom to my device by the way thankx for the reply. i'm going to try it and see if it will even charge ,turn on or go to bootloader
dastylee said:
--------------------------------------------------------------------------------
it was a cooked rom
i uspl it before flashing the rom to my device by the way thankx for the reply. i'm going to try it and see if it will even charge ,turn on or go to bootloader
Click to expand...
Click to collapse
Visit this link: http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets, and then flash with the original rom of your Artemis. It has worked for me.
Cheers
Hi guys!
I've got bricked HTC 4350 from one of our employees - seems it has drowned
But in some way it still works - it boot into bootloader (RGB screen), connects via usb, I can even flash it with official RUU. But after flashing ends it still boots into bootloader. Tryed to fix it using mtty but recieved message that task command is unknown.
Maybe you have any ideas how to unbrick it?
Or it is lost?
Thanks in advance!
Click me
Cheers
Thank for the link, but I've done this several times and PDA still boots only to bootloader. I've tried wm5.1 ruu and wm6.1 ruu. It only changes spl numbers.
I need to boot to windows.
Click2
Cheers
Thanks! I've f**cked with goldcard several hours and nothing worked.
Buut occasionly I've found that I need to hold button on other side to boot to OS. Weird staff I know but that's how the things are.
Anyway thank you for your help!
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
rikpotts said:
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
Click to expand...
Click to collapse
First of all check your USB cable... and choose another USB port to connect the cable and try to flash your ROM again
Try this as it has been solved before may help you out
http://forum.xda-developers.com/showthread.php?t=425922
same problem
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
Many Thanks for the replies.
I followed the link and i'm confident it will solve my problem. Unfortunately I cannot get mtty to offer "USB" from the dropdown. I remember going round in circles trying to get USB show a few years ago with a SPV C550.
If anyone can help me, that would be great. I'm using Vista. This might be why the steps in both the initial post and replies on the first page don't work for me.
Hi all,
a few days ago I installed IlSalgo 6.5 rom because sometimes i've found my polaris with 3lit3 rom powered off.
This morning after I powered on my polaris it stopped at the first screen (on energy star) and then it shutdown.
I tried with an hard reset while it starts, but nothing changes...
Could you help me?
Thanks in advance,
Reveng3
P.S. sorry for my english
try to put into bootloader; hold camera and press the reset hole.
Then when in this flash your stock rom that was shipped with it or the 6.1 upgrade that was released. See if that brings it back to life!
Let us know what happens after that and go from there.
I tried putting it into bootloader... it shows the colors screen and then shutdown....
But now it works....(finally it stopped on colors screen without power off)
maybe after i removed the microSd (i tried with and without microSd, with and without sim, soft reset, hard reset, bootloader)
this evening i'll try using again my microSd card...
thanks
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Reveng3 said:
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Click to expand...
Click to collapse
check radio version always