When I received my N1, I followed the instructions to power it up. When it finished starting up it said that it didn't have a SIM card and that it couldn't detect the SD card either. Rebooting didn't help.
I took the battery and both cards out. The SD card was in correctly but the SIM card was upside down. I reseated both and powered up... then everything seemed to work.
Anyone have a similar experience?
My Sim card was inserted in the correct direction but was not under the little tab on the side. I noticed it when I put the battery in because the back cover would not close completely. But everything turned out OK.
yeah an actual person inserts the SIM card, but by the sound of it maybe a team of chimps?
Related
Hi guys, I just put in a 1GB Micro SD card and I am having problem getting the card out or ejecting the card. Anybody know how or what is the correct way to get it out. I try pushing the card down but it doesn't pop up.....please help thanks!!!
Just press it inwards, and will pop out itself
I had the same problem. I went back to the store and we tried to get out by pushing it, but i did not work. We manged to get it out by pulling it out, and then we inserted a dummy card. This made the eject mechanism function again, and when I inserted my card again it worked.
I had the same problem when I first put in my micro SD card. I had to pry it out with tweezers. Thanks to this thread, I got the idea that I could get the mechanism working. So, I worked the card in and out several times, pushing it all the way in with my nail and letting it snap back a bit (and prying it out again) until the mechanism became loose enough to work properly.
Hi all,
I just got recently a 2gb microSD from Sandisk and conected in my X01HT(HTC TyTN), it doesn´t reconize the card and the card get very, very hot
anyone could help me with that?
Thanks
Assuming there's nothing wrong with the card, you might have put the card in wrong, or the card might not be aligned properly when placed into the slot. Try these:
1) make sure the contacts side is facing up when you put in the card (slot facing you, pda screen facing up)
2) as you insert the card (slowly), try to align it more to the bottom left of the slot. If it's inserted correctly, you should feel some springing pushing the card out as you insert it.
3) If the card is inserted correctly, it should bounce back out if you push it in a little.
hopefully that helps, but if all else fails, take the card back to the store.
Hi All,
I just turned the phone off and then on again and when it turned on I got an error message saying warning! no sd card inserted. There was one in the phone and it seemed to work fine after that. It does it nearly every time I reboot the phone.
Is this normal?
Thanks.
Well, it has happened to me a couple of times. Just remove the battery and jerk the memory card a bit and it should work again.
just make sure the microsd card is inserted properly. When you push it in it should do a click
this is what happened. the micro sim adapter got stuck, and i tried my best to pull it back out extremely gently. after pulling it back out, i tried to start it with no sim card but it didnt start.
i took another full size sim, slid it in. it was extremely tight for whatever reason, but anyways after successful insert remove, its now a bit smoother. the problem now is, regardless if i have a sim card in there or not, it still tells me there is no sim card in the slot.
what do u guys think? did i break a sim card pin? i dont have a torx screw driver to check unfortunately...
V20 H918 10j (still on Nougat)
Here's when it happened:
We were going on a road trip so I shut the phone off, took out the SD card (64 gig Sandisk), then the sim card, put the SD card back in and closed up the phone. I did not turn the phone back on. Then put the sim card in my tablet so it would have data. That worked fine.
The next day, I want the sim card back in my phone, so I do the reverse. Boot up the phone and it does not see the SD card at all. I put the SD card in the tablet and the tablet sees it just fine. Back in the phone - no go. I try a couple reboots and nothing. Boot to TWRP, it doesn't see it.
I get home and dirty flash the rom (Ovrdrive). Still doesn't see the card. I try a couple other cards (32 and 64 gig sandisk) which work just fine in other devices and the computer and the phone either doesn't see the cards or it says they are corrupt. So I format a 32 gig card (I did it a couple times in both xfat and fat32), put it in the phone and the phone says it is corrupt and needs to be formatted. So I select format. The format box is immediately at 20% and then it crashes.
I tried using ES File Explorer on the phone to format it but still a no go. I re-flashed the kernel that I have been using for the last year, that didn't help either. I used contact cleaner spray and then even used a soft small paint brush to try and clean the contacts. Nothing.
I had not put any new apps or made any changes to the phone in over a month before this happened. So.... I think somehow the pins for the card somehow got damaged or just old and something just got bent or broken or tweeked. I have another V20 that got water damaged and I looked closely at the SD card pins and compared to the current phone. I can't see any difference.
I'm posting this in case anyone else has had this problem and 1. was able to resolve it or 2. replaced the sim reader and that fixed it. Sim readers on ebay are cheap, but they have to be soldered in. Something that small is beyond my skill level.
There is a thread for the G6 that talks about this same problem. No solution. Speculation about having the card reader replaced. One person did a complete factory reset twice and that didn't work. So I'm left to believe this is a hardware issue.
Cheers.